Beli CNC mesin bubut dengan diameter pembubutan 0–199 mm bekas (272)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jumlah sumbu: 2, Monforts KNC 6 S ini diproduksi pada tahun 1999. Ini adalah mesin bubut horizontal yang kokoh dengan diameter pembubutan maksimum di atas alas sebesar 650 mm dan panjang pembubutan maksimum 2.000 mm. Mesin ini dilengkapi dengan unit kontrol F&E yang meningkatkan fleksibilitas penggunaannya. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan Monforts KNC 6 S yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Keunggulan Mesin Keunggulan Teknis Mesin Hedpfxeyail Ie Ag Rsni • Diameter pembubutan maks. di atas penyangga: 340 mm • Diameter pembubutan maks. di atas alas: 650 mm • Panjang pembubutan maks.: 2000 mm Informasi tambahan Mesin masih terpasang listrik

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, kecepatan spindel (maks.): 3.000 rpm, jarak pergerakan sumbu X: 287 mm, jarak gerak sumbu Z: 864 mm, produsen pengendali: HAAS, jumlah sumbu: 2, Mesin bubut horizontal produksi tahun 2001. HAAS SL-30THE ini dirancang untuk presisi dengan kecepatan spindle 3.000 rpm dan diameter chuck 254 mm. Dengan panjang langkah sumbu X 287 mm dan langkah sumbu Z 864 mm, mesin ini memberikan performa andal untuk aplikasi pembubutan. Manfaatkan kesempatan untuk membeli mesin bubut horizontal HAAS SL-30THE ini. Hubungi kami untuk detail lebih lanjut. • Diameter chuck rahang: 254 mm Hnjdpfsyhb Rrsx Ag Rji • Mesin berjalan, namun drive vektor tidak berfungsi saat kecepatan motor diturunkan. Penggerak vektor berusia kurang dari satu setengah tahun, kemungkinan masih dapat diperbaiki.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 2.039 h, produsen pengendali: MAZATROL, This 3-axis Mazak Quick Turn 200MA L was manufactured in 2023. It features a MAZATROL SmoothC control system, a maximum machining diameter of Ø360 mm, and a bar capacity of Ø65 mm. The spindle operates at 5,000 rpm with an 8-inch chuck size. Ideally suited for precision turning operations, this machine is equipped with a 12-position drum turret and rapid traverse speeds of 30,000/33,000 mm/min. Take advantage of this opportunity to purchase a Mazak Quick Turn 200MA L horizontal lathe. Contact us for further information. Machine Advantages Technical Specifications • Operating hours: 4,426 hours/automatic mode: 2,310 hours/auto shutdown: 2,039 hours • Travel (X/Z): 225 mm / 605 - 1,125 mm / rapid traverse (X/Z): 30,000 / 33,000 mm/min • Swing over bed: Ø660 mm / max. machining diameter: Ø360 mm / max. machining length: 535 / 1,055 mm / bar capacity: Ø65 mm • Spindle speed: 5,000 rpm / spindle nose: A2-6 / spindle bore: Ø76 mm / main spindle motor: 15 kW [40% duty cycle] / 11 kW [continuous] • Turret: 12-position (VDI) drum turret / tool shank size: 25 mm / boring bar diameter: Ø40 mm / turret indexing time: 0.25 sec/step • Live tool spindle speed: 5,000 rpm / live tooling milling capacity: drill Ø20 mm / end mill Ø20 mm / tap M20 × 2.5 / live tool motor: 5.5 kW [40% duty cycle] / 3.7 kW [continuous] Hodpfx Aeyk Tk Nog Reni • Electrical requirements: 26.5 kVA (30 min rating) / 20.8 kVA (continuous) • Machine dimensions (LxWxH): 2,760 × 1,485 × 1,730 mm / weight: approx. 4,700 – 5,700 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, en Hsdpfxjym T Dns Ag Rjni

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 3.971 h, kecepatan spindel (maks.): 6.300 rpm, jarak pergerakan sumbu X: 100 mm, jarak gerak sumbu Z: 300 mm, daya motor spindle: 5.500 W, lebar total: 1.700 mm, berat keseluruhan: 1.400 kg, produsen pengendali: SIEMENS, model controller: Sinumerik 828D, jumlah sumbu: 2, Horizontal lathe from 2014. This EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. It is equipped with a VDI 16 disc turret featuring 12 tool stations and a maximum chuck size of 100 mm. If you are looking for high-quality turning machines, consider the EMCO TURN E25 units we have for sale. Contact us for further details. 2 units available. • Availability: 2 units • Working area: • Swing over bed: 250 mm • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar passage: 25.5 mm • Distance between centers: 405 mm Hsdpfx Aeymqmmsg Rsni • Main spindle & drive: • Spindle nose: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° • Tool system: • Turret type: VDI 16 disc-type turret with directional logic • Number of tool stations: 12 • Tool shank cross-section: 12 x 12 mm • Feed & axis performance: • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min • Positioning accuracy (Ps): 3 µm • Physical specifications & utilities: • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Additional equipment: • Chip conveyor Dimensions Machine Depth: 1270 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 4.741 h, produsen pengendali: SIEMENS, model controller: Sinumerik 828D, Horizontal lathe from 2011. This EMCO TURN E25 offers a maximum turning diameter of 85 mm and a turning length of 225 mm. It features a VDI 16 disc turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking for high-quality lathes, consider the EMCO TURN E25 machines we have for sale. Contact us for more information. 2 units available. • Availability: 2 units • Working area: • Swing over bed: 250 mm • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar passage: 25.5 mm • Distance between centers: 405 mm • Main spindle & drive: • Spindle nose: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° • Tool system: • Turret: VDI 16 disc turret with directional logic • Tool stations: 12 • Tool shank cross-section: 12 x 12 mm • Feed & axis performance: Hsdpfx Ageympxno Rsni • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min • Positioning accuracy (Ps): 3 µm • Utilities: • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Additional equipment • Chip conveyor (in relation to the specified machine weight)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 154 h, jarak pergerakan sumbu X: 215 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 605 mm, tinggi total: 1.725 mm, lebar total: 1.690 mm, berat keseluruhan: 4.650 kg, produsen pengendali: MAZATROL, model controller: SMOOTH Ez, jumlah sumbu: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It offers a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 rpm with a motor power of 15.0 kW. It is equipped with a 12-position turret and rapid traverse rates of 30, 10, and 30 m/min in the X, Y, and Z axes respectively. Please contact us for further information about this machine. Additional equipment • Transformer for Europe (CE compliant) • Roller guide with spherical roller bearing • SD memory card interface + USB storage interface • 1 set of control buttons • Foundation kit (steel plates) • CE marking (with noise filter) • C-axis positioning with 0.0001° increment Hedpfxox D R Svo Ag Rjni • 12-position turret • Y-axis control • Bar feeder interface Additional information Automatic parts catcher High-pressure coolant Preparation for chip conveyor 8" open chuck Measuring arm Signal tower Rotating center Chain-type chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic picking cycle with load detection Quick-change tool holder system Bar capacity Workpiece: Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar capacity: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and end of workpiece: 81 to 686 mm Turret: Number of tool stations: 12 Tool size (external turning): 25 mm Tool size (internal turning): 40 mm Tool size (live drill): 20 mm Tool size (live end mill): 20 mm Tool size (live tap): M20 Indexing time per step: 0.23 s Indexing time full rotation: 0.63 s Tailstock: Quill bore (Morse taper): MT No. 5 Tailstock travel (body movement): 565 mm Maximum push force: 5,000 N Tooling: Milling spindle power (continuous): 3.7 kW Milling spindle power (40% duty cycle): 5.5 kW Maximum milling spindle speed: 4,500 rpm Minimum milling spindle speed: 20 rpm Media: Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions: Machine depth: 2,785 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, kecepatan spindel (maks.): 3.400 rpm, jarak pergerakan sumbu X: 239 mm, jarak lintasan sumbu Y: 51 mm, jarak gerak sumbu Z: 826 mm, daya motor spindle: 22.400 W, jumlah sumbu: 3, This 3-axis HAAS ST-30Y horizontal lathe was manufactured in 2022. It features a 10-inch chuck, a maximum turning diameter of 13.75 inches, and a turning length of 32.5 inches. The machine is equipped with a BMT-65 turret with 12 stations and driven-tool speeds of up to 4,000 rpm. The Y-axis allows for off-center milling, drilling, and threading. Take advantage of the opportunity to purchase this HAAS ST-30Y horizontal lathe. Contact us for more information. • Chuck size: 10 inches (≈254 mm) • Maximum bar capacity (through spindle): 3 inches (≈76 mm) • Maximum swing over front apron: 31.75 inches (≈806 mm) • Maximum turning diameter: 13.75 inches (≈349 mm) with BMT65 turret • Maximum turning length: 32.5 in (≈826 mm) • Rapid traverses: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) Hodpfxex D Iixj Ag Rjni • Spindle bore: 3.5 inches (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Driven-tool speed: up to 4,000 rpm • Y-axis capability: off-center milling, drilling, and threading • Coolant capacity: 55 gal (~208 L) • Air requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195-260 V (region dependent) • Machine footprint: 151 in × 70 in × 79 in (excluding conveyor) Additional equipment • Driven tool holders (live tooling) • Various toolholders • Liners

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, kecepatan spindel (maks.): 1.600 rpm, tinggi total: 1.430 mm, berat keseluruhan: 3.920 kg, Optimum D 560x3000 (2011) – Precision Lathe for Sale This Optimum D 560x3000 was manufactured in 2011. It features an 80 mm spindle bore, a swing diameter over bed of 560 mm, and a maximum workpiece weight of 600 kg. The machine offers a spindle speed of up to 1,600 rpm and is equipped with a coolant pump. Ideal for precision turning applications. Contact us for more information. Additional Equipment • Leadscrew pitch: 6 mm • Longitudinal feed [mm/rev] range: 0.059 - 1.646 • Cross feed [mm/rev] range: 0.020 - 0.573 • Metric thread pitch [mm/rev] range: • Inch pitch [threads/inch] range: 112 - 2 • Module thread range: • Diametral thread (ISO 678) range: 4 - 112 Hnodpfxjx Nr S Re Ag Rei Machine Advantages Technical Highlights • Compound rest travel range: • Top slide travel (mm): 130 • Cross slide travel (mm): 326 • Center height (mm): 280 // Between centers (mm): 3010 // Bed width (mm): 350 • Swing diameter in bed gap (mm): 788 • Steady rest capacity (mm): 19-165 • Follower rest capacity (mm): 16-95 • Special steady rest (not included) (mm): 0-270 • Turning length in bed gap (mm): 200 • Spindle mount: Camlock ASA D 1-8 Additional Information Tailstock Tailstock cross adjustment (mm): ±13 Tools Max. toolholder size for turning tools in 4-way toolpost (mm): 25x25 Power Supply Total connected load: 3 x 400V / 8 kW ~ 50 Hz Spindle motor drive power: 3 x 400V / 7.5 kW ~ 50 Hz Coolant pump: 3 x 400V / 0.1 kW ~ 50 Hz Machine lighting: 0.1 kW Control voltage: 24 V / 160 VA Dimensions Machine depth: 4400 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 9 h, This horizontal lathe was manufactured in 2009. It is a Weiler E 60x1000 with a spindle bore of 83 mm and a swing over bed of 640 mm. With a maximum torque of 1400 Nm and a speed range up to 2500 rpm, it is ideal for heavy-duty turning operations. Recently overhauled, with renewed bearings and guides, it ensures high precision. Take advantage of this opportunity to purchase the Weiler E 60x1000 horizontal lathe. Please contact us for further information about this machine. Additional equipment • Tailstock quill diameter: 100 mm / Tailstock quill travel: 200 mm / Tailstock quill taper: Mk.5 Machine benefits Technical advantages of the machine • Distance between centers: 1000 mm / Center height: 320 mm / Swing over bed: 640 mm / Swing over cross slide: 405 mm • Cross slide travel: 380 mm / Bed saddle guide length: 570 mm • Spindle nose as per DIN 55025, size 8 / Spindle bore: 83 mm / Main spindle taper: Metric 90 • Drive power at 60%/100% duty cycle: 20.5 / 17 kW / Max. spindle torque: 1400 Nm / Gearbox speed range, stage 1: 0–800 rpm / Gearbox speed range, stage 2: 0–2500 rpm • Overhaul works include hardening and grinding the bed guides, grinding the tailstock guides, as well as overhauling the bed and cross slide assembly. • Renewed and replaced components include: sliding surfaces, gib strips, all wipers, belts, main spindle motor, safety devices, rotary switches, and lubrication system. • Weiler cycle control: 840D/SL1 • Toolholder according to customer preference: Multifix size C or Parat size 3 Hodpfjx D Ry Hex Ag Rsni Additional information Machine overhauled in 2022 Cycle-controlled Optional: A used 200 mm 3-jaw chuck can be supplied. A steady rest with 1 m center distance is not included, but can be sourced from the manufacturer at any time. As stated in your description, we offer our customers the choice between two different tool systems: Multifix size C or Parat size 3. These are completely rebuilt, which is why no toolholders are included.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 6.235 h, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 255 mm, jarak lintasan sumbu Y: 120 mm, jarak gerak sumbu Z: 800 mm, daya motor spindle: 22.000 W, berat keseluruhan: 11.600 kg, produsen pengendali: FANUC, model controller: 18i-TB, sudut putar poros C (maks.): 360 °, jumlah sumbu: 3, This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a swing diameter over bed of 800 mm and a maximum bar capacity of 65 mm. Equipped with a Fanuc 18i-TB control unit, it offers spindle speeds up to 5,000 rpm, and has a 12-position turret. Take the opportunity to purchase this horizontal lathe DAEWOO PUMA TT 2000 SY. Contact us for further information on this machine. Additional Equipment • Touch Probe: Tool setting probe • Automatic Bar Feeder: ILS-RBK10016 L 2265 mm, W 1116 mm, approx. 490 kg • Bar Feeder Max. Material Length/Diameter: 1600 mm/5–65 mm • Short-bar magazine feeder with servo drive • Main and sub spindle both equipped with 250 mm hydraulic power chucks • Enclosed work area conforming to accident prevention regulations • Memory card slot, RS 232 interface • Tool load monitoring, bed flushing system • Workpiece air blow-off function • Automatic tool setter // Driven tools on both turrets Machine Benefits Technical Advantages • Chuck size (both spindles): 250 mm • Clamping force (both spindles): hydraulically operated, 5–40 bar • Max. turning diameter: approx. 390 mm / approx. 315 mm • Max. workpiece length: 740 mm • Max. bar capacity: 65 mm • Total power requirement: 75 kVA / 11 kW with transformer • Regular maintenance performed Additional Information Additional equipment Coolant system, chip conveyor, automatic parts catcher with conveyor belt, extensive accessories included Technical documentation and installation plans available Hnedpfsx D H Tcjx Ag Roi Tooling Turret: BTM65 Driven tools: Yes Tool load monitoring: Yes Tool holder diameter: 40 mm Motor for driven tools: 7.5 kW Collet size for rotary tools: ER32 (D = 3–20 mm) Max. rotary tool speed: 4,000 rpm Dimensions Machine depth: 4,100 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, produsen pengendali: FANUC, jumlah sumbu: 3, This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021 and offers advanced horizontal turning capabilities. This machine is ideal for complex and precise metalworking applications, delivering efficient production thanks to its robust construction and state-of-the-art technology. If you are looking for a high-quality lathe, consider the CMZ TTL-66-66-TTY-T2Y machine we are offering for sale. Please contact us for further information. Machine Advantages Technical Features • LPS for left spindle / axial stop for left spindle / coolant supply through left spindle / Hainbuch Axfix 65 collet chuck for left spindle / LPS system in right spindle / coolant supply through right spindle / tailstock on right spindle (long version) for rotating tailstock center MT3 / Hainbuch Axfix 65 collet chuck for right spindle • Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar) / lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar) • Tool presetting device / tool life management / tool load monitoring / double radial holder for 20x20 mm tools / holder for Ø32 h75 boring tools / TTL/10400/02 axial holder for AGW ER32 with internal coolant supply 70 bar / TTL/10400/09 radial holder for AGW with internal coolant supply 70 bar ER16 Hodpfx Agox D Ei Ae Rsni • Coolant nozzles above the spindles / coolant wash nozzle / coolant tank level monitoring • Rotatable viewing window / machine status light / rear chip conveyor with double chain / preparation for extraction, connection flange Ø150 / special portal enclosure / GL20-II 3-axis CNC gantry loader / servo-controlled 2x180° double swivel gripper for shaft parts / WS-700-3000 workpiece carrier on left front side / WS-700 with 3 rows of V-guides • Collet set for raw material: Ø32 mm, Ø35 mm, square 30 mm / gripper set for finished parts: Ø32 mm, Ø38-40 mm, square 30 mm • Extraction system: LTA E120-X1-H, including mounting parts, hoses, and bracket • CMZ requires a signal indicating that a part can be placed / an output signal indicating that the conveyor belt can run freely

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, kecepatan spindel (maks.): 4.200 rpm, jarak pergerakan sumbu X: 267 mm, jarak lintasan sumbu Y: -49 mm, jarak gerak sumbu Z: 840 mm, tinggi total: 2.300 mm, berat keseluruhan: 6.200 kg, produsen pengendali: FANUC, model controller: Series 32i-Model B, This 3-axis Takisawa TS-4000YS was manufactured in 2021. It features a robust frame weighing 6,200 kg with a 30° slanted bed for stability and precision. Key features include a 22 kW main spindle, 618 Nm torque, and rapid traverses up to 30 m/min. The machine is equipped with a sub spindle, a Y-axis, and a 15-position turret for versatile machining operations. If you are looking for high-quality turning capabilities, consider the Takisawa TS-4000YS, which we have for sale. Please contact us for further information. Additional Equipment • LNS bar feeder interface • Parts catcher • Renishaw tool measurement system (main and sub spindle) • Kitagawa BB-250 3-jaw hydraulic chuck – main spindle Hedpfxox D Iu Io Ag Roni • Kitagawa SS1881K hydraulic hollow cylinder – main spindle • Kitagawa B-206 3-jaw hydraulic chuck – sub spindle • Kitagawa SS12640K hydraulic hollow cylinder – sub spindle • 15-station turret • High-performance coolant pump (520 W) • Work light Machine Advantages Qualitative Machine Advantages • High rigidity and integrated main and sub spindles enable precise and vibration-free machining. • High performance and a stable machine bed allow for heavy-duty cutting operations. Technical Machine Advantages • Max. turning diameter: 600 mm • Max. turning diameter and length: Ø 370 x 750 mm • Maximum torque: 618 Nm • A-axis: 780 mm • Bar capacity: Ø 82 mm • Number of turret tool positions: 15 • Maximum tool speed: 6,000 rpm • 3 driven tools (radial/axial) • 2 live centers • Static tool holder Additional Information Machine still under power Dimensions Machine depth: 3,000 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, daya motor spindle: 45.000 W, tinggi total: 2.120 mm, berat keseluruhan: 11.500 kg, produsen pengendali: SIEMENS, model controller: 810 D, panjang produk (maks.): 5.400 mm, jumlah sumbu: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, a center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it is equipped with a robust main drive rated at 45/37 kW. This machine is ideally suited for heavy-duty turning work and comes with accessories such as a chuck, a faceplate, and a steady rest. Contact us for further information about this machine. • Working area: • Distance between centers: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed carriage guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Spindle: • Spindle nose DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% duty cycle): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gearbox stage 1: 1-280 rpm • Speed range gearbox stage 2: 4-900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill taper: MK 6 • Dimensions and weight of the machine: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul Work Performed: • Hardening and grinding of all bedways • Grinding of tailstock ways • Overhaul of the complete bed and cross slide assembly (grinding/scraping of all guides) • Renewal of bed carriage slideways • Renewal or shimming of keyways and ground guides • Replacement of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (regrinding MK 6 taper), replacement of spindle and nut • Adjustment of the tool system • Replacement of the main spindle motor • Inspection of auxiliary motors (X and Z axis) • Refurbishment of existing safety guards (sliding hood/chuck guard) • Replacement of all rotary, cam, and limit switches • Replacement of spindle and handwheel encoders • Renewal of flexible cables and coolant hoses in the working area • Replacement of centralized lubrication system • Renewal of energy chains • Painting as specified (standard structural basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Hnedox D Hz Topfx Ag Roi Additional Equipment • 1x used 630 mm diameter chuck with various jaws • 1x used 1100 mm diameter faceplate • 1x used steady rest, max. 300 mm diameter • 1x used chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 506 mm, daya motor spindle: 15.000 W, produsen pengendali: FANUC, jumlah sumbu: 3, This 3-axis DOOSAN LYNX2100LMB was manufactured in 2022. It features a Fanuc control system, a maximum turning diameter of 300 mm, and a turning length of 510 mm. The X/Z axis travel is 205/560 mm, with a main spindle speed of up to 4,500 rpm and a power rating of 15 kW. The machine is equipped with a 12-station turret and various tool holders. Consider the opportunity to purchase this horizontal lathe, the DOOSAN LYNX2100LMB. Contact us for more information about this machine. • Maximum turning diameter: 300 mm • Maximum turning length: 510 mm • Driven tool speed: 6,000 rpm • Maximum main spindle speed: 4,500 rpm • Number of turret positions: 12 Additional equipment: • Parting tool holder Hnedjx D Di Iepfx Ag Roi • Radial tool holder • Axial tool holder • Drill holder • Double radial tool holder • Triple drill holder • ER32 collet holder with cylindrical shank Technical Specification Driven Tools: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, produsen pengendali: FANUC, model controller: Oi-TF, jumlah sumbu: 3, en Hodpex D I N Ssfx Ag Roni

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, kecepatan spindel (maks.): 53 rpm, daya motor spindle: 7.500 W, produsen pengendali: SIEMENS, model controller: 828D, jumlah sumbu: 2, This EMCO Emcomat E-200 was manufactured in 2016. It is a robust horizontal lathe with a swing over bed of Ø 400 mm and a distance between centers of 1000 mm. The machine offers a spindle speed range of 50-4000 rpm with stepless speed control, and a spindle bore diameter of Ø 80 mm. If you are looking for a high-quality lathe, you should consider the EMCO Emcomat E-200 we have for sale. Contact us for further information. Machine advantages Technical machine features • AC motor, steplessly adjustable • Max. nominal torque at main spindle: 108 Nm • Longitudinal travel (carriage): 900 mm • Cross slide travel: 220 mm • Distance between centers: 1000 mm • Center height: 200 mm • Swiveling cross slide: Ø 220 mm • Permissible workpiece weight unsupported (max. 5 kg at 4000 rpm): 30 kg / supported by tailstock: 80 kg • Bed width: 260 mm • Cross slide width: 150 mm Additional information Spindle Spindle mount: Size 5 (KK5 / DIN 55029) Spindle bore diameter: Ø 80 mm Spindle diameter at front bearing: Ø 200 mm Max. chuck diameter: Ø 260 mm Max. faceplate diameter: Ø 260 mm Spindle speed range: 50-4000 rpm Speed control: stepless Tailstock Hnjdpfx Agsx D Hzaj Rji Quill diameter: Ø 50 mm Quill taper: MT3 Quill stroke: 120 mm Tools Tool section: 20 x 20 mm Feed Feed range X / Z axis: 0-8000 mm/min Max. feed force X: 4 kN Max. feed force Z: 4 kN Ball screw X axis, lead / diameter: 5 / Ø 16 mm Ball screw Z axis, lead / diameter: 5 / Ø 32 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, kecepatan spindel (maks.): 4.500 rpm, produsen pengendali: MAZATROL, model controller: 640T NEXUS, jumlah sumbu: 2, Mazak QTN 250M 1000L 2-sumbu ini diproduksi pada tahun 2004 dan menawarkan kinerja andal sebagai mesin bubut horizontal. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan Mazak QTN 250M 1000L yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Keunggulan Mesin Keunggulan Teknis Mesin • Diameter kerja maksimum: 380 mm • Panjang kerja maksimum: 600 mm • Kapasitas batang: 76 mm • Dimensi self-centering (spindel utama): 250 mm • Hidung spindel (spindel utama): ASA 8 • Lubang spindel (spindel utama): 88 mm Hnsdpfxsyaln Ss Ag Rsi • Panjang tailstock: 1000 mm, tirus: 4 cm • Kapasitas tangki pendingin: 300 liter Informasi tambahan Mesin masih dalam kondisi terhubung listrik

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1984, kecepatan spindel (maks.): 800 rpm, daya motor spindle: 16.000 W, tinggi total: 1.800 mm, berat keseluruhan: 7.300 kg, jumlah sumbu: 2, This horizontal lathe Poreba TPK 90/5M was manufactured in 1984. It features a swing over bed of 930 mm, a spindle diameter of 95 mm, and, with two steadies, can handle workpiece weights up to 9,000 kg. The machine is equipped with a tailstock, coolant pump, chuck guard, and tool holder. Take advantage of this opportunity to purchase the Poreba TPK 90/5M horizontal lathe. Contact us for further information about this machine. Additional Equipment • Standard equipment: coolant pump, chuck guard, tool holder • Optional equipment available: 3- or 4-jaw chuck, various diameters and versions • Digital Read Out (DRO) for 2 axes, including display, installation and calibration • Steady rest 40-400 mm with rollers • Steady rest 400-600 mm with rollers • MULTIFIX quick-change toolpost Machine Benefits Technical Machine Advantages • Distance between centres / turning length: 5000 mm • Removable gap: 1200 mm • Max. workpiece weight between centres: 6000 kg • Max. workpiece weight between centres + 1 steady rest: 7500 kg • Max. workpiece weight between centres + 2 steady rests: 9000 kg Hjdpoyaqinofx Ag Roni • Number of feeds: 80 • Feed range (mm/rev): - longitudinal: 0.1 - 12.8, - cross: 0.05 - 6.4 Additional Information The machine has been completely overhauled and comes with a 12-month warranty. Dimensions Machine depth: 7500 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1988, produsen pengendali: FANUC, jumlah sumbu: 2, NAKAMURA TMC-15 ini diproduksi pada tahun 1988. Ini adalah mesin bubut horizontal dengan diameter rongga spindle 34 mm. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan NAKAMURA TMC-15 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Keunggulan mesin Keunggulan teknis mesin • Rongga spindle: 34 mm Hodpfx Agsyaim Sj Rjni Informasi tambahan Mesin masih terhubung ke listrik

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, kecepatan spindel (maks.): 4.000 rpm, daya motor spindle: 18.500 W, berat keseluruhan: 5.000 kg, produsen pengendali: MAZATROL, model controller: T Plus, Mazak SQT 250M ini diproduksi pada tahun 1998. Ini adalah mesin bubut horizontal, ideal untuk tugas pengolahan presisi. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hedeyaix Ijpfx Ag Rjni Perlengkapan tambahan • Wadah penampung bagian & penghitung unit Keunggulan mesin Keunggulan teknis mesin • Kecepatan rapat tinggi: 30 m/menit • Ukuran chuck: 250 mm, chuck Kitagawa B-210A615 • Kapasitas batang: 64 mm • Fitur: lengkap dengan perkakas standar dan penggerak • Sumbu C & milling, sumbu C: 0,001° Informasi tambahan Mesin masih dalam kondisi teraliri listrik.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 10.000 h, Okuma LB300-10000 MC 3-sumbu ini diproduksi pada tahun 2003. Mesin ini memiliki diameter putar 340 mm, panjang putar 1.000 mm, dan 12 posisi alat. Dilengkapi dengan konveyor serbuk, dan dioperasikan dalam sistem satu shift. Pertimbangkan kemungkinan untuk membeli mesin bubut horizontal Okuma LB300-10000 MC ini. Hubungi kami untuk informasi lebih lanjut. Hnodpfxox Ut H Ho Ag Rji • 12 posisi alat • Konveyor serbuk • Operasi satu shift • Tanpa alat, perlengkapan, atau chuck.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 270 mm, jarak lintasan sumbu Y: 120 mm, daya motor spindle: 22.000 W, tinggi total: 2.330 mm, berat keseluruhan: 10.000 kg, panjang produk (maks.): 3.530 mm, jumlah sumbu: 5, This 5-axis Okuma LT 300 MY was manufactured in 2021 and features a maximum turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 rpm and is equipped with a motorized 12-station turret. This machine is ideal for complex turning operations, offering fast traverse speeds and a large distance between centers of 1,200 mm. Take advantage of this opportunity to purchase the Okuma LT 300 MY horizontal lathe. Contact us for more information. • Distance between centers: 1,200 mm Hnodpfx Agex Imrie Rsi • Maximum turning diameter: 350 mm • Swing diameter over guards: 550 mm • Spindle / sub-spindle: ASA 8 • Bar capacity: 65 mm • Tailstock/sub-spindle travel (W-axis): 940 mm • X-axis travel: 270 / 230 mm • Y-axis travel: ±60 mm • Z-axis travel (ZA / ZB): 930 / 920 mm • Rapid traverse (X / Z / W): 30 / 40 / 40 m/min • Y-axis rapid traverse: 26 m/min • Turret: 12 positions, motorized, VDI 40 • Turret index time: 0.25 s • Rotary tool speed/power: 100–4,500 rpm, 7.0 / 3.3 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, produsen pengendali: SIEMENS, jumlah sumbu: 3, Mesin bubut horizontal 3-sumbu Index MC 400 ini diproduksi pada tahun 2008. Mesin ini sangat cocok untuk pekerjaan bubut presisi, menawarkan konstruksi yang kokoh dan kinerja yang andal. Jika Anda mencari fungsi pembubutan berkualitas tinggi, pertimbangkan mesin Index MC 400 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Keunggulan mesin Keunggulan teknis mesin • Diameter pembubutan maksimum: 350 mm • Panjang pembubutan maksimum: sekitar 300 mm • Lubang lewat spindle: 66 mm • Revolver 14 posisi • Perkakas bertenaga Informasi tambahan Hnodpfx Asyar Ifog Rsi Mesin masih terhubung ke listrik

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2025, kecepatan spindel (maks.): 3.500 rpm, jarak pergerakan sumbu X: 680 mm, jarak lintasan sumbu Y: 95 mm, jarak gerak sumbu Z: 680 mm, daya motor spindle: 18.500 W, tinggi total: 1.950 mm, berat keseluruhan: 4.800 kg, panjang produk (maks.): 3.380 mm, jumlah sumbu: 3, This 3-axis Hyundai Wia HD2600Y horizontal lathe was manufactured in 2025. It features a swing over bed of Ø820 mm, a maximum turning diameter of Ø300 mm, and a turning length of 610 mm. The spindle operates at up to 3,500 rpm with a motor power of 18.5 kW. The machine is equipped with a 12-station turret and a milling tool speed of 6,000 rpm. Consider the opportunity to acquire this Hyundai Wia HD2600Y horizontal lathe. Contact us for further details. • Condition • Original packaging • 0 operating hours Capacity • Swing over bed: Ø820 mm • Swing over cross slide: Ø650 mm • Max. turning diameter: Ø300 mm Hnedpfxeycwlzj Ag Rji • Max. turning length: 610 mm • Bar capacity (sub): Ø81 mm • Chuck size (main): 10" Spindle • Spindle bore (main): Ø91 mm • Motor (max/cont.) (main): 18.5/15 kW (25/20 hp) • Motor (max/cont.) (sub): 5.5/3.7 kW (7.4/5 hp) • Torque (max./cont.) (main): 400.7/243.7 Nm (295.7/179.9 lbf-ft) • Torque (max./cont.) (sub): 46.6/25.3 Nm (34.4/17.7 lbf-ft) • Spindle type: Belt drive • Spindle nose (main): A2-8 • Spindle nose (sub): Ø110 mm • C-axis indexing: 0.001° Feed • Travel (Z/2B): 680 / 680 mm • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z/2B): 24 / 24 m/min • Slide type: Box guideways Turret • Number of tools: 12 (24) • Tool size (OD): Ø25 mm • Tool size (ID): Ø40 mm • Indexing time: 0.2 sec • Y-axis type: Wedge type Live Tool • Milling spindle speed: 6,000 rpm • Motor (max/cont.): 5.5/3.7 kW • Torque (max/cont.): 52.6/25.6 Nm • Collet size: Ø16 mm (ER25) • Type: BMT55 Tailstock • Taper: MT#4 • Quill diameter: Ø80 mm • Quill stroke: 120 mm • Travel: 680 mm Tank Capacity • Coolant tank: 200 l • Lubrication tank: 2 l Power Supply • Electrical power: 27 kVA • Power cable thickness: Over 25 mm² • Voltage: 220/60 (200/50) CNC • Control: HYUNDAI WIA FANUC i-Series - Smart Plus / SIEMENS 828D