Kondisi: baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Kontrol Fanuc, Lubang spindle 66mm, Gjdpsycwwwefx Ag Rotw dua revolver, dua sumbu Y, spindle lawan, penangkap bagian, pemuat pendek, pompa tekanan tinggi, penjepit alat, fungsi pinol,

Kondisi: baik (bekas), Tahun pembuatan: 1997, - Kontrol: SIEMENS SINUMERIK 840-C - Diameter batang maks.: 65 mm - Sumbu-C - Kecepatan spindle utama: 31 - 6.300 rpm - Revolver 1: 8 posisi, 4 di antaranya digerakkan - Revolver 2: 8 posisi, 4 di antaranya digerakkan - Kecepatan alat bergerak: 4.000 rpm - Kedua revolver dengan pendinginan internal - Sistem tekanan tinggi - Konveyor serpihan - Bar feeder IRCO SiMag 65 - Panjang batang maks.: 3.200 mm Dimensi PxLxT: - Mesin: 3.400 x 1.700 x 1.800 mm - Bar feeder: 4.000 x 1.000 x 1.400 mm Godpsxa Epbefx Ag Rjtw - Konveyor serpihan: 3.000 x 1.100 x 1.600 mm Berat total: sekitar 6.000 kg

Kondisi: bekas, Tahun pembuatan: 2020, Swing diameter: 380 mm Godpfotugggsx Ag Rstw Turning length: 511 mm Control: Mazatrol SmoothG Swing diameter over cross slide: 276 mm Maximum swing diameter over bed: 675 mm Standard machining diameter: 276 mm Bar capacity: 65 mm X-axis travel: 234 mm Rapid traverse X-axis: 30 m/min Z-axis travel: 625 mm Rapid traverse Z-axis: 33 m/min Spindle speed: 35 - 5000 rpm Spindle nose: A2-6 Spindle bore: 76 mm Power (40% duty cycle): 26 kW Rated power (100% continuous operation): 22 kW Maximum torque: 465 Nm Spindle speed (milling spindle): 6000 rpm Main drive power: 11 kW Maximum torque: 90 Nm Milling spindle speed (driven tools): 35-6000 rpm Max. torque at milling spindle: 47 Nm Milling spindle drive power: 5.5 kW (40% duty cycle) Milling spindle power (continuous operation): 3.7 kW Number of tool stations: 12 (driven) Tool cross-section (external): 25 mm² Boring bar diameter: 40 mm Drill diameter: 20 mm Milling cutter diameter: 20 mm Tapping diameter: M20x2.5 Turret indexing time per station: approx. 0.20 sec Coolant tank: 180 l Connected load: 46.2 kW Machine weight: approx. 5.9 t Space requirement: approx. 2.7 x 1.9 x 1.9 m Machine is in like-new condition including the following accessories: - Signal light (3-color LED), rectangular - High-performance coolant system (1.1 kW) Max. flow rate: 17.6 l/min, Pressure (at pump): 5 bar - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/NSCH 98 mm - Preparation for bar feeder - Robot interface (Advance/Profibus) - Chip conveyor with low discharge height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Prep. for using a hollow chuck cylinder on sub-spindle - Hollow clamping device incl. draw tube + cylinder - Chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Collet change device STANDARD EQUIPMENT Automatic on/off with warm-up function Air blast device at chuck on sub-spindle Linear guide systems with guide carriages USB port (1 connection) Set of manuals in electronic form on CD C-axis main spindle input accuracy 0.0001° Spindle positioning sub-spindle without C-axis input accuracy 0.001° 12-position VDI tool turret Operator door with interlock switch Double foot switch for main and sub-spindle Hydraulic pressure safety interlock Fully enclosed work area, work area lighting Safety features in accordance with international standards High-performance coolant system (520 W), max. flow rate 11.5 l/min Complete coolant system Automatic opening/closing of chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (side) Synchronization main and sub-spindle Synchronous tapping with milling spindle Relocation detector Mazatrol SmoothG control, 19" LCD color display (touch screen) User macro (600 variables), EIA/ISO input function Optional stop (selectable halt) Background tool path verification Thread cutting function (G33), polar coordinate input (EIA) Direct input of drawing data Interface for LAN, SD memory card I/F - Used machine, sold without warranty -

Kondisi: bekas, Maximum turning diameter: 360 mm Turning length: 505 mm Control: Mazatrol SmoothC Max. swing diameter over bed: 660 mm Max. swing diameter over slide: 255 mm Max. bar diameter: 80 mm Spindle speed range: 35 – 4,000 rpm Spindle torque: 358 Nm X-axis travel: 225 mm Rapid traverse X-axis: 30 m/min Z-axis travel: 605 mm Rapid traverse Z-axis: 33 m/min Spindle nose: A2-8'' Spindle bore: 91 mm Spindle through-hole: 80 mm Milling spindle speed (driven tools): 5,000 rpm Max. milling spindle torque: 47 Nm Drive power - milling spindle: 5.5 kW (40% duty cycle) Tailstock quill taper: MK 5 Tailstock travel: 565 mm Max. axial pressure: 5,000 Nm Tool turret: 1 Number of tool stations: 12 (driven) Turning tool shank size: 25 x 25 mm Tool holder: BMT Compressed air connection: 5 / 160 bar / l/min Operating voltage: 400 V Coolant tank: 180 l Motor power: 18.5 kW (30 min duty) Rated power (continuous operation 100%): 15 kW Machine weight: approx. 6 t Space requirements: approx. 3.6 x 2 x 1.8 m Machine including the following special accessories: - Side chip conveyor (right) - Productivity Package C – special version as per stock machine This package includes: - High-performance coolant system (1.1 kW), max. flow rate 17.6 l/min - Preparation for side chip conveyor - Automatic tool eye STANDARD EQUIPMENT - Transformer for the European market - Use of linear guideways with guide carriages - SD MEMORY I/F(1P) + USB MEMORY I/F(1P) - 1 x USB memory interface (1 slot) - Spindle bore: 91 mm - Set of manuals in electronic form (CD) - Mazak standard colour - CE marking, metric, 50 Hz - C-axis input accuracy: 0.0001° - NC-controlled tailstock - Tailstock pressure adjustment - Tailstock with fixed quill MK5 SAFETY FEATURES - Operator door with interlock switch - Double foot switch - Hydraulic pressure interlock - Fully enclosed work area - Work area lighting - Safety features according to global standards COOLANT SYSTEM - Grundfos coolant pump, type MTA (0.25 kW / 7.6 l/min) - Complete coolant system - Automatic shutdown via safety switch MEASURING SYSTEM - Absolute positioning system CNC CONTROL - Synchronous tapping with milling spindle - Relocation Detector - Mazatrol SmoothC - 10.4" colour screen - User macro (600 variables) - EIA/ISO input function - Background tool path verification - Thread cutting function (G33) - Polar coordinate input (EIA) - Drawing data direct input function - LAN interface - Various tool holders Gedpev Dxw Rjfx Ag Rjtw - All dimensions, weight and power specifications are non-binding - - Used machine sold without warranty -

Kondisi: bekas, Tahun pembuatan: 2022, Turning diameter 276 mm Turning length 500 mm Control Mazatrol Smooth G Max. swing diameter over bed 695 mm Distance spindle end - turret 710 mm Bar capacity max. 65 mm Spindle speed range 35 - 5,000 rpm Spindle torque 465 Nm X-axis 234 mm Rapid traverse X-axis 30 m/min Y-axis 100 mm Rapid traverse Y-axis 21 m/min Z-axis 625 mm Rapid traverse Z-axis 33 m/min Spindle nose A2-6 Spindle bore 76 mm Milling spindle speed (driven tools) 5,000 rpm Max. torque at milling spindle: 47 Nm Drive power - milling spindle 5.5 kW (40% duty cycle) Tailstock quill taper MT 5 Tailstock travel 550 mm Tool turret 1 Number of tool stations 12 (driven) Tool holder VDI 30 min nominal power 42.6 kVA Compressed air connection 0.5 / 330 MPa / l/min Distance spindle / table 710 mm Total power consumption 37 kW Machine weight approx. 5.7 t Space requirement approx. 2.8 x 2 x 1.9 m with the following special accessories: - Mayfran chip conveyor, side discharge, hinged belt conveyor - Engraving function ACCESSORIES / MACHINE OPTIONS Automatic on/off and warm-up function A warm-up is necessary to prevent issues such as abnormal guideway wear and sluggish movement. Sufficient warm-up enables the machine to achieve the heat resistance required for consistent, high-precision workpiece machining. Transformer for the European market 8" chuck for main spindle with enlarged bore USB connection (1 port) Mazak standard paint Main spindle motor AC 26 kW 12-position VDI tool turret, also for driven tools at each station (Maximum performance only when the cutting tool is driven.) Programmable tailstock (MT5) Tailstock quill (MT5) Y-axis control SAFETY DEVICES Operator door with interlock switch Double foot switch Separate switches for opening and closing the chuck. Hydraulic pressure lock Fully enclosed work area Work area lighting COOLANT SUPPLY High-performance coolant system (520W), max. flow rate 11.5 l/min Gjdpfxjynbd Sj Ag Rjtw Complete coolant system CHUCKS, ETC. Automatic opening/closing of chuck jaws 8" power chuck with enlarged bore (main spindle) Kitagawa BB208 MEASURING SYSTEM Automatic Tool Eye NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation detector Mazatrol SmoothG control 19" LCD color display (touch screen) User macro (common variables: 600 pairs) Mazak tapping/drilling cycle Tornado in EIA/ISO (only possible on machines with Y-axis) EIA/ISO package EIA/ISO input function EIA/ISO additional functions - Helical interpolation - 3D tool correction - Workpiece coordinate rotation - Geometric function - Scaling - External data input/output Thread cutting function (G33) Dwell time feed G93 G37 tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems, 300 sets User macro (600 variables) Mazak tapping/drilling cycle Tornado in EIA/ISO EIA/ISO drilling cycles (arc, grid, circle, circular arc, line) Machining on inclined surfaces EIA/ISO input function Tool path verification in the backg...

Kondisi: bekas, Turning diameter 340 mm Turning length 575 mm Control Mazatrol SmoothEZ Max. swing diameter over bed 695 mm Standard machining diameter 235 mm Max. bar capacity 65 mm X-axis travel 215 mm Rapid traverse X-axis 30 m/min Y-axis travel 100 mm Rapid traverse Y-axis 10 m/min Z-axis travel 605 mm Rapid traverse Z-axis 30 m/min Spindle speed 35 - 5000 rpm Spindle nose A2-6 Spindle bore 76 mm Power (40% duty cycle) 15 kW Rated power (100% continuous operation) 11 kW Max. torque 167 Nm Spindle speed 35 - 6000 rpm Spindle nose A2-5 Power (40% duty cycle) approx. 7.5 kW Power (continuous operation) 5.5 kW Max. torque 53 Nm Milling spindle speed (driven tools) 20 - 4500 rpm Max. torque at milling spindle: 47 Nm Drive power – milling spindle 5.5 kW (at 40% duty cycle) Milling spindle power (continuous operation) 3.7 kW Number of tool stations 12 (driven) Tool section (external) 25 mm² Boring bar diameter 40 mm Drill diameter 20 mm Milling cutter diameter 20 mm Thread tap diameter M20 Coolant tank 225 l Chuck diameter main spindle 8'' Chuck diameter sub spindle 6'' W-axis travel 585 mm Rapid traverse W-axis 30 m/min C-axis 555 Machine weight approx. 4.9 t Space requirements approx. 2.8 x 2 x 1.8 m Special equipment: - Chip conveyor, hinged belt, side ejection - Production package, includes: Preparation for bar feeder Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (side) Signal light (3-color LED), rectangular C-axis sub spindle 0.0001° Automatic Tool Eye 8" power chuck Kitag. BR08 & cylinder SR1566C (HD1) GENERAL MACHINE OPTIONS Air blow unit at chuck (sub spindle) Transformer for European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) CE marking CE marking, metric, 50 Hz Sub spindle positioning 0.0001 degree without C-axis 12-station tool turret Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth Restart function / restart operation Gedpfx Ajwngklsg Rotw Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 HP) Sub spindle motor AC 7.5 kW MAIN SPINDLE C-axis main spindle input accuracy (contour/index) 0.0001° Mazak standard color (F White [fine]/S Black) Automatic shutdown via safety switch activation Double foot switch Hydraulic pressure interlock RFID door locking Safety foot switch with locking mechanism Safety measures to global standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and sub spindle) Chuck status feedback (main and sub spindle) Feedback of chuck status via sensors 8" power chuck 6" power chuck (sub spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation detector NC control Mazatrol SmoothEz 15" Color LCD (touch screen) User macro (shared variables: 600 pairs) EIA/ISO package EIA/ISO input function EIA/ISO additional functions Helical interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Thread cutting function (G33) Inverse time feed G93 G37 tool length measurement Polar coordinate input (EIA) Optional stop

Kondisi: bekas, Tahun pembuatan: 2012, Turning diameter 203 mm Turning length 300 mm CNC control Mazatrol Smart Distance spindle end - turret 99-434 mm Max. turning diameter 280 mm Bar diameter 51 mm Travel - X axis 200 mm Travel - Z axis 340 mm Spindle speed 35 - 6000 rpm Rapid traverse X-axis 33 m/min Rapid traverse Z-axis 36 m/min Spindle bore 61 mm Tool turret 12-position Turning tool shank cross-section 20 mm Boring bar diameter 32 mm Workpiece weight 150 kg Spindle nose A2-5 Taper in tailstock quill MK4 Gtjdpfsynbd Eox Ag Rew Tailstock travel 350 mm Total power requirement 16.3 kW Machine weight approx. 3.5 t Space requirements approx. 1.9 x 1.6 x 1.8 m Special equipment: Automatic Tool Eye Spindle orientation Signal beacon Additional coolant nozzles above the chuck Automatic shut-off Interface for bar feeder Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece deposit Chip conveyor, lateral discharge Including: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, but max. spindle housing length / UVV Max. weight 67 kg per bar Burr-free bars or bar sections Depth 600 mm for accommodating bars Input voltages from 200 – 460 Volt / Operating voltage 24 V DC LNS control programmed on SIEMENS STEP 7 PLC Flexible control panel with large screen Operator guidance via pictograms for the simplest operation and setting Device cover with 2 Plexiglas viewing windows.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Mesin Bubut CNC Okuma Genos L3000 e MYW Kontrol: OSP-P300LA-e Tahun pembuatan: 2021 Diameter pemesinan maks.: 390 mm Diameter ayun di atas cross slide: 260 mm Panjang putar maks.: 500 mm Perjalanan sumbu: Sumbu X: 235 mm Sumbu Z: 450 mm Sumbu Y: ±50 mm Sumbu C: 360° / 0,001° Godpfjyt E A Nex Ag Rjtw Revolver: 12 posisi – semua bertenaga Putaran spindle: 38 - 3.800 rpm Adaptor alat: VDI 40 Aksesori/Perlengkapan: - Konveyor serpihan - Penyeting sentuh - One Touch IGF - Penangkap bagian - Sistem pendingin diperkuat 8 bar - Sistem ekstraksi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, kecepatan spindel (maks.): 2.500 rpm, jarak pergerakan sumbu X: 180 mm, jarak gerak sumbu Z: 1.000 mm, daya motor spindle: 26.100 W, tinggi total: 2.083 mm, lebar total: 1.971 mm, berat keseluruhan: 8.800 kg, produsen pengendali: FANUC, model controller: 18-TA, panjang produk (maks.): 4.191 mm, jumlah sumbu: 2, en Godpfsyt Rtgox Ag Rstw

Kondisi: bekas, Tahun pembuatan: 2016, en-GB Gtsdpfjytp Rqsx Ag Row

Kondisi: baik (bekas), Tahun pembuatan: 2007, Jumlah sumbu NC: 5 Diameter bar yang dapat dilewatkan: 42 mm Panjang pembubutan maks.: 100 mm Lingkar ayun maks.: Ø 700 mm Kecepatan cepat: 17,5 m/menit SPINDEL UTAMA Gtsdpfoxa Ex Njx Ag Rjw Kecepatan spindel maks.: 4.000 rpm Daya spindel: 7,5 kW Chuck collet: DIN 173E Pemegang alat (kotak): 20x20 mm Pemegang alat (bulat): Ø 20/25 mm Resolusi sumbu C: 0,1° TEMPAT ALAT Total: 14 Luar spindle utama: 5 Dalam spindle utama: 3+4 Alat bertenaga: 2 Pemrosesan simultan: dalam + luar Berat: 2.700 kg Barfeeder untuk bar 3 m

Kondisi: sangat baik (bekas), Center height 125 mm Center distance 500 mm Gtjdpfxolyrcij Ag Row Spindle speeds 40-3000 rpm Various accessories MARCELS MACHINES CH

Kondisi: bekas, Tahun pembuatan: 2002, translation-001 Gtodpfx Asycxibeg Rsw

Kondisi: bekas, Tahun pembuatan: 2014, 2 vertical turning machines (tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL DATA FOR VL 3 MACHINE (Subject to errors) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-axis travel: 400 mm Z-axis travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange as per DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum speed: 7,500 rpm MAIN DRIVE AC asynchronous motor (40/100% duty cycle): 25/16 kW Full power from spindle speed (100% duty cycle): 1,800 rpm Torque (40/100% duty cycle): 134/85 Nm FEED DRIVE Rapid traverse speed, X: 60 m/min Rapid traverse speed, Z: 30 m/min Feed force in X and Z: 5 kN Ball screw diameter X/Z: 40 mm TURRET Cylinder shank holder DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT as per VDE 0113 Operating voltage: 400 V Control voltage DC: 24 V / AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS AND WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides for the X-axis, located outside the working area. PORTAL SLIDE INCLUDING SLIDEWAY GUIDES Mounting for motor spindle AC synchronous drives for X- and Z-axes Encapsulated linear measuring systems. Resolution of all linear axes: 0.001 mm. Absolute measurement. Rapid traverse speed: X-axis: 60 m/min Z-axis: 30 m/min 1 MOTOR SPINDLE size 5, DIN 55026 Max. speed: 7,500 rpm Power (40/100% duty cycle): 25/16 kW Torque (40/100% duty cycle): 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRAL OIL SUPPLY for lubricating ball screws and roller guides. COOLING UNIT The cooling unit controls the machine’s thermal balance. Motor spindle, tool turret, and control cabinet are kept at ambient temperature. TOOLING SYSTEM 1 TURRET WITH 12 POSITIONS with tool bores ø40 DIN 69880. Shortest indexing time with electric drive. Cooled for consistent accuracy. Internal coolant supply to the tool in machining position. WORKPIECE STORAGE AND TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEED Storage capacity: 27 workpieces with ø30–85 mm or 18 workpieces with ø30–130 mm Max. workpiece height: 100 mm. Loading height: 1,020 mm. Chain indexing belt with prism supports. The workpieces are NC-positioned for pick-up by the clamping device. The pick-up spindle grabs the blanks from the conversion-free storage and transport belt. Gsdpfjytn Emox Ag Retw COOLANT AND CHIP DISPOSAL SYSTEM 1 COOLANT SUPPLY UNIT with integrated coolant tank, Capacity approx. 300 L, coolant filter. Coolant pump output approx. 80 L/min at 7 bar. 1 CHIP CONVEYOR Chip discharge height 1,250 mm, hinged belt design. 1 EMULSION MIST EXTRACTION from working area ADDITIONAL EQUIPMENT AND UPGRADES WORKPIECE STORAGE AND TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND TURNING STATION OP20 COOLANT AND DISPOSAL SYSTEM 1 FLUSHING NOZZLES Working area: 2x, main body: 1x. HYDRAULICS AND PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with attachment 1 BLOW-OFF FOR PICK-UP UNIT – with 2 nozzles – WITHOUT maintenance unit (see MAINTENANCE UNIT FOR COMPRESSED AIR)

Kondisi: sangat baik (bekas), Cincin pengukur ulir Gsdpfx Agoyt Eg Ie Retw Diameter 100 - 170 mm Nomor gudang: (45131) Dijual sebagai satu set atau satuan 170 x 2. 6g 130 x 3. 6h 130 x 4. 6h 130 x 4 kondisi baik 130 x 6 kondisi baik 130 x 6. 6h 125 x 3 6h 125 x 2. 6g 124 x 4. kondisi baik 120 x 4 120 x 3 120 x 3 100 x 6 kondisi baik 100 x 4 6h 100 x 3 6h

Kondisi: bekas, Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, machine-specs-gurutzpe-super-at-8000-600 Gtodpoyc R I Aofx Ag Row

Kondisi: baik (bekas), Used GURUTZPE Lathe Brand: GURUTZPE Model: Super-A 3000/500 Serial No.: 232 Centre distance: 3000 mm Spindle bore: 325 mm Centre height: 500 mm Maximum swing diameter: 1400 mm Maximum diameter over bed: 1000 mm Maximum diameter over carriage: 740 mm Number of speeds: 16 Digital readout: FAGOR Model: NV 300T Includes: Godpoh Ryfhjfx Ag Rjtw - Chuck - Steady rests

Tahun pembuatan: 2000, Kondisi: hampir baru (bekas), Brand: IEMCA Model: CNC BOSS 542 / 44 Year: 2000 Gjdpfx Aoiqx Uyjg Rjtw Capacity: For bars from 5 to 42 mm Maximum length: 4400 mm Hexagonal bar diameter: 4.4 mm - 36 mm Magazine capacity: 28 bars of 10 mm diameter Feed speed: 750 mm/sec Return speed: 800 mm/sec

Kondisi: baik (bekas), Used Pinacho L1-260 Lathe Distance between centers: 1,625 mm Maximum swing over bed: 520 mm Godpjudw Iisfx Ag Rotw Length of gap: 350 mm Swing over longitudinal carriage: 470 mm Swing over cross slide: 320 mm Faceplate swing: 770 mm Spindle bore: 68 mm Main motor power: 7.5 HP *Supplied with a 3-jaw chuck. *Price available with or without CE conformity upon request.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 4.000 kg, penjepit spindle: MK 5, Mesin Bubut Konvensional Gtjdeyc Rylepfx Ag Rsw Merek: Geminis Model: GE 870 Daya: 12,5Hp Jarak antara senter: 4.000mm Diameter maksimum di atas alas: 870mm Diameter maksimum pada gap bed: 1.100mm Diameter maksimum di atas carriage: 580mm Panjang gap: 340mm Lubang spindle utama: 82mm Kecepatan: 18 (16-1250) Lebar carriage: 620mm Tailstock: Morse Cone 5 Termasuk: - Chuck 3 rahang 310mm (rahang dalam, luar, dan lunak) - Plat muka 700mm - Penyangga tetap tertutup 360mm - Piring penyangga DIN untuk chuck 330mm - Piring/aksesori utama 500mm - Berbagai roda gigi untuk jenis ulir yang berbeda Berat: 4.000kg

Kondisi: bekas, berat keseluruhan: 3.000 kg, penjepit spindle: MK 5, Bubut konvensional Merek: Geminis Model: GE 650 Daya: 12,5Hp Jarak antara senter: 2.000 mm Diameter maksimum di atas alas: 650 mm Diameter maksimum pada pelipatan tempat tidur: 820 mm Diameter maksimum di atas carriage: 390 mm Gtjdpsyc Rucefx Ag Rjw Panjang pelipatan: 310 mm Lubang spindle: 82 mm Kecepatan: 18 (16-1250) Lebar carriage: 620 mm Tailstock: Morse taper 5 Termasuk: - Chuck 3 rahang 320 mm dengan set rahang dalam, luar, dan lunak - Dudukan alat konvensional + dudukan alat quick change 140x140 mm (2 dudukan) - Steady rest tertutup 320 mm - Steady rest tertutup 180 mm - Steady rest terbuka pada carriage - Berbagai gigi untuk berbagai ulir Berat: 3.000 kg

Kondisi: baik (bekas), diameter putar di atas sled silang: 380 mm, lubang spindel: 70 mm, diameter pembubutan: 640 mm, diameter pembubutan di atas alas geser: 900 mm, Features: Distance between centers: 2,000 mm Admitted swing over bed: 640 mm Admitted swing over carriage: 380 mm Admitted swing over gap: 900 mm Spindle bore: 70 mm Includes: 400 mm 3-jaw chuck 390 mm 4-jaw independent chuck Steady rest (open and closed) Gedpfx Aoudh Slsg Rstw Quick-change tool post with 4 holders.

Kondisi: baik (bekas), Tahun pembuatan: 1999,

Kondisi: bekas, Tahun pembuatan: 2010, jam operasional: 1.900 h, nomor mesin/kendaraan: IntNr231495, Used Haas ST-20SS (Super Speed) CNC turning centre, year of manufacture 2010, including LNS Super Hydrobar 6.50 HS 4.6, year of manufacture 2011. Technical specifications: 15-inch colour LCD monitor, user-friendly HAAS control Max. turning diameter: up to 254 mm Max. turning length: 533 mm Spindle: Main spindle bearing defective! Max. speed: 5,000 rpm Drive power: 22.4 kW (30 hp) high-performance vector drive Spindle nose: A2-6 Spindle bore: 88.9 mm Tool turret: 24-station hybrid turret Rapid traverse: 24.0 m/min (X-axis) 30.5 m/min (Z-axis) Equipment: automatic tool presetting system (Auto Probe Arm) Gjdpfxjytrwge Ag Retw driven tool unit LNS Super Hydrobar 6.50 HS 4.6 (year 2011) for bar diameters from approx. 5 mm to 50 mm (expandable up to 65/68 mm within the HS series, depending on model) The machine can be inspected under power by appointment. Technical data and information subject to change and error. Intermediate sale reserved!

Kondisi: bekas, Tahun pembuatan: 1973, Swing diameter over bed 2,235 mm Swing diameter over support 2,997 mm Turning length 12,200 mm Control system: SIEMENS Faceplate diameter 2,000 mm Space requirement approx. 7 x 22 m Machine weight approx. 220 t HOESCH MFD CNC HEAVY-DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation included Technical Data Footprint: 7 x 22 meters + control cabinet 4.7 x 0.5 x 2 meters Faceplate 2,006 mm Center height 1,499 mm Saddle overrun 2,235 mm Bed swing diameter 2,997 mm Turning length 12,192 mm Min./max. workpiece clamping diameter in chuck Ø457/1600 mm Max. workpiece weight 110 tons Speed range 0.5 - 140 rpm (300 hp motor) Feed range 0.0118 - 7.08"/rev Permanent capacity Ø356-902 mm Copying depth 508 mm inductive Max. cutting force 30,000 Nm Double steady rest capacity Ø356-902 mm, 50 tons, roller type Machine Data 1.1 Complete machine Max. swing over cross-slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm Max. workpiece weight 100,000 kp Height measured from workshop floor to machine axis 2,200 mm 1.2 Headstock Main spindle diameter 670 mm Faceplate diameter 2,000 mm Max. chuck diameter 1,600 mm Min. clamping diameter 455 mm Dead stop angle 80° Faceplate speed: Constant torque 1st range 0.5 – 2.6 rpm 2nd range 1.25 – 7.2 rpm 3rd range 3.1 – 18 rpm 4th range 7.8 – 45 rpm Constant capacity 1st range 9.0 rpm 2nd range 22.6 rpm 3rd range 56 rpm 4th range 140 rpm Main drive power 220 hp Max. faceplate torque 30,000 kpm Key speed 5.7 rpm 1.3 Saddle Max. allowable main cutting force 30,000 kp Longitudinal feed rate 0.3 – 120 mm/min Cross feed rate 0.3 – 120 mm/min Rapid traverse rate longitudinal 2,000 mm/min Rapid traverse rate cross 1,000 mm/min Max. copying depth 500 mm Max. toolpost length, measured from the front edge of the cross-slide to the front edge of the toolpost: 700 mm Toolpost – width 60 mm / 35 mm Cutting height of tool units 60 mm Cutting height of shank tools mounted on the clamping table 100 mm Stroke of the upper toolpost 820 mm 1.4 Tailstock Tailstock cylinder diameter 580 mm Cylinder adjustment 150 mm Dead stop angle 80° Rapid traverse speed 2,000 mm/min Positioning speed 500 mm/min Gedpfst Ei Huex Ag Rstw 1.5 Steady Rest Clamping range 350 – 900 mm Load 50,000 kp