Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 15.642 h, diameter sekrup: 45 mm, tinggi total: 2.213 mm, berat keseluruhan: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precise plastics processing. Take advantage of this opportunity to purchase the SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Please contact us for further information. Additional equipment • Fanuc robot Machine benefits Quality-related machine benefits • Process data acquisition, mould protection Technical machine benefits • Minimum mould height: 350 mm / maximum mould height: 745 mm • Electronic main connection: 3/400 V 50Hz • Programmable sequence, high-dynamic feed speed, hydraulic pressure-dependent hold pressure control, digital/wear-free position measuring system. Additional information Standard equipment: Support of the movable platen via linear guides/ Ejector with short/long stroke/ Interface for external printer (hard copy)/ Individual motion optimization of the axes (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Separate mains connection for drive / heating/ Coloured data display/ Enhanced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mould and machine cooling/ Basic version Europe/ Corrosion protection/ Painting: Jet Black (RAL9005): machine bed with built-in parts, lower control cabinet/ Signal White (RAL9003): clamping unit, injection unit, nozzle guard/ Signal White (RAL9003): fixed safety devices, upper control cabinet/ Signal White (RAL9003): protective doors/ Textured surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (EUROMAP March '96)/ Centre diameter fixed platen: 160 mm/ Centre diameter moving platen: 160 mm/ Without side ejector plate/ Standard mould installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only with protective door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mould movement)/ Oil lubrication of toggle/ Injection unit/ Optional equipment: Servo-controlled pump (activeDrive)/ Emergency stop switch on the operator side/ Separate opener for fine filtration in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Signal beacon/ Operation with protective door open (operator side)/ 6 pneumatic 5/2-way valves on the moving platen (programmable)/ 6 pneumatic 5/2-way valves on the fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ Iedpfx Agex D Hntj Rjap 1-circuit core pull via proportional valve (programmable, with check valves)/ Manual pressure relief for 1-circuit core pull/ Widened protective cover on operator side (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mould protection via sensor during closing (activeQ)/ Manually adjustable monitoring switch for mould-open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), diameter sekrup: 120 mm, el Iodpex D Rcnjfx Ag Reap

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 42.581 h, diameter sekrup: 20 mm, produsen pengendali: FANUC, FANUC Roboshot S50iA ini diproduksi pada tahun 2016. Ini adalah mesin cetak injeksi listrik dengan gaya penutupan 50 ton dan diameter sekrup 20 mm. Pertimbangkan kesempatan untuk membeli mesin cetak injeksi listrik FANUC Roboshot S50iA ini. Hubungi kami untuk informasi lebih lanjut. • Opsional: Sistem penanganan Wittmann Isdpfx Agex D R Ahj Roap

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, gaya penjepit: 31.500 kN, diameter sekrup: 155 mm, berat injeksi: 9.642 g, tinggi total: 4.090 mm, berat keseluruhan: 190.000 kg, panjang produk (maks.): 14.760 mm, Husky E 3150 RS 170 155 ini diproduksi pada tahun 1997. Mesin ini menawarkan gaya penutupan sebesar 31.500 kN, diameter screw 155 mm, dan berat tembakan 9.642 g. Sangat ideal untuk produksi massal, mesin ini memiliki volume injeksi 13.205 cm³ dan tekanan injeksi 1.636 bar. Untuk informasi lebih lanjut mengenai mesin ini, silakan hubungi kami. • Pelat pemasangan (H x V): 3.230 x 2.780 mm • Jarak bebas bukaan (H x V): 2.250 x 1.800 mm • Langkah pembukaan: minimum 2.100 mm • Lebar bukaan maksimum: 4.100 mm • Volume tembakan: 13.205 cm³ • Tekanan injeksi: 1.636 bar • Screw L/D: 23 • Radius nozzle: 25 mm • Kedalaman pencelupan: 50 mm • Tiga piringan inti di sisi tetap • Empat piringan inti di sisi bergerak Ijdpfx Asx Sz Ereg Roap • Dua belas kasade pneumatik.

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), MAPLAN MFT 750/160 edition S ini diproduksi pada tahun 2016. Mesin ini adalah mesin cetak injeksi vertikal, ideal untuk pemrosesan plastik yang presisi. Silakan hubungi kami untuk informasi lebih lanjut. Keunggulan mesin Keunggulan teknis mesin • Daya terpasang: 84 kW • Tegangan nominal: 3 x 400 V • Tegangan kontrol: 24 V • Jarak keamanan: 310 mm • Waktu berhenti: 128 ms • Jarak berhenti: 62,3 mm • Tinggi platform maksimum: 750 mm Iedpex U Tihjfx Ag Rsap • Dimensi platform: 1850 x 1300 mm • Sistem sepenuhnya berfungsi dan telah digunakan dalam operasi 2/3 shift antara tahun 2017 hingga 2022. • Pada tahun 2023, botol semprot sudah dipasang ulang seal-nya dan pelat isolasi telah diganti. Informasi tambahan Mesin masih dalam kondisi tersambung listrik.

Tahun pembuatan: 2013, jam operasional: 42.681 h, Kondisi: siap digunakan (bekas), produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik dari tahun 2013. Krauss Maffei 35-180 CX ini memiliki ukuran plastifikasi 180 dan diameter ulir 28 mm. Dengan 3 unit yang tersedia, pertimbangkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 35-180 CX ini. Hubungi kami untuk informasi lebih lanjut. • Ukuran plastifikasi: 180 • Pengaturan plastifikasi: H • Diameter ulir: 28 mm Isdpfxoym Uv So Ag Roap • Radius nosel: 10 mm • Diameter lubang nosel: 4 mm • Tersedia 3 unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 101.500 h, gaya penjepit: 3.000 kN, berat keseluruhan: 19.700 kg, Hydraulic injection moulding machine from 2007. This ENGEL Victory VC1800/300 P features a clamping force of 3,000 kN and a maximum opening stroke of 900 mm. It is equipped with a robust control system featuring a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking for a high-quality injection moulding machine, consider the ENGEL Victory VC1800/300 P offered for sale here. Please contact us for further details. An identical ENGEL Victory VC1800/300P (2008 model) is also available – same specifications. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control unit: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum daylight between platens: 1,500 mm • Minimum mould height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Installed screw diameter: 70 mm • Maximum shot volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection flow rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (boosted): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Operating hours: 101,500 h • Maintenance/service history: - Complete replacement of hydraulic hoses in 2025 - Motor and planetary gearbox replaced in 2021 - High-pressure cylinder replaced in 2020 - Several major, high-cost components renewed in recent years Additional equipment: • Robot: ENGEL ERC 64 (included) • Axis travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 Isdpfx Agjyn Ntzo Reap • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm containers • GWK temperature control unit (optional)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 37.049 h, gaya penjepit: 4.000 kN, berat keseluruhan: 21.000 kg, This Arburg 820 S 4000 - 2100 injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter ranging from 60 to 100 mm, and a maximum shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and offers a hydraulic pump drive power of 55 kW. Ideally suited for high-precision plastic injection moulding applications. Please contact us for more information about this machine. Clamping unit • Max. locking force: 150 kN • Max. opening force: 100 kN / increased: 800 kN • Max. opening stroke: 700 mm • Min. mould height: 350 mm • Max. platen distance: 1050-1550 mm • Tie bar spacing (clear): 820 × 820 mm • Mould mounting platens (W × H): 1171 × 1171 mm • Max. mould half weight: 4500 kg • Max. ejector force: 100 kN • Max. ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Colour: Plastic-coated structure (light grey / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Combined power sockets: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 A Injection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Max. theoretical shot volume (cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Max. shot weight (g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Max. injection pressure (bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Max. injection rate (cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Max. injection rate with accumulator (cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Max. screw surface speed (m/s): 0.38 | 0.28 | 0.28 • Max. screw torque (Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Max. nozzle contact force: 110 kN • Max. nozzle stroke: 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Iasdpfx Asydpvbsg Rop Dimensions and weights (basic machine) • Clear length: 490 mm • Electrical connection (fusing) motor + heating: 250 A • Electrical connection (fusing) motor: 125 A • Electrical connection (fusing) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 96.194 h, gaya penjepit: 2.000 kN, diameter sekrup: 40 mm, berat injeksi: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and platen dimensions of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robot system for enhanced automation. Ideally suited for precision hydraulic injection molding. Please contact us for further information on this machine. • Configuration: 2K (two-component injection molding machine) • Clamping Unit: • Platen size (H x V): 920 x 760 mm • Minimum mold height: 500 mm • Opening stroke: 750 mm • Max. daylight (distance between platens): 1,150 mm • Max. mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection Unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 cm³ • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection Unit 2 (Secondary - 200W): Iedpfx Asyfrb Nog Reap • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 cm³ • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: printer interface; process control included Additional Equipment • Robot System: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 98.780 h, gaya penjepit: 2.000 kN, berat keseluruhan: 12.200 kg, produsen pengendali: ENGEL, model controller: CC100, en-GB Iaedpfx Asyf H Nnjg Rsp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 44.678 h, gaya penjepit: 2.500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Dimensions of clamping plate: 995 x 1050 mm • Minimum mould installation height: 330 mm • Distance between platen plates: 1,150 mm Iasdjyhbq Eopfx Ag Rop • Max. mould weight: 3,430 kg total (fixed side: 1,715 kg / moving side: 2,286 kg) • Core pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Armoured unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: LRX 150 linear robot with B/C axis combination (KM LRX 150 linear robot included) • Hot runner control: 12 zones • Cooling: 4 x HB 100

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), diameter sekrup: 55 mm, Engel victory 750/160 Spex ini diproduksi pada tahun 2012. Ini adalah mesin cetak injeksi hidrolik dengan core pull, pengaman pelat pendorong, katup udara 1/2" dan manifold air 10 jalur. Pertimbangkan kesempatan untuk membeli mesin cetak injeksi hidrolik Engel victory 750/160 Spex ini. Hubungi kami untuk informasi lebih lanjut. • 2 unit tersedia • Mesin 1: 29.462 jam • Mesin 2: 28.713 jam Iasdpox D I Egofx Ag Rep • Core pull • Pengaman pelat pendorong • Katup udara 1/2" Perlengkapan tambahan • Manifold air 10 jalur

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 68.463 h, diameter sekrup: 35 mm, Arburg 470 E 1000-700 ini diproduksi pada tahun 2011. Ini adalah mesin cetak injeksi listrik yang kokoh dengan gaya penutupan 100 ton dan diameter sekrup 25 mm. Mesin ini dioperasikan dengan 400V 3∼, 50Hz dan daya terpasang total 78kW, dirancang untuk performa yang efisien. Manfaatkan kesempatan Anda untuk membeli mesin cetak injeksi listrik Arburg 470 E 1000-700 ini. Hubungi kami untuk informasi lebih lanjut. • Tegangan operasi: 400 V, 3 fasa, 50 Hz • Tegangan kontrol: 230 V, 50 Hz; 24 V AC • Arus nominal motor: 61 A • Arus nominal pemanas: 58 A • Total arus nominal: 119 A Iaodpfxex D Rnds Ag Rep • Total daya terpasang: 78 kW • Kalibrasi (tahun): 2027 • Unit seleksi: ya • Pelat tunggal: ya • Jarak antar tie bar: 470 x 470 mm • Opsional: Penanganan Geiger

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mould installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mould weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 ccm • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticising throughput: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm Iodpfsyhby Hjx Ag Rsap • Armoured injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Tool sensors: Priamus (p=2 / t=0)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, gaya penjepit: 800 kN, el Iodpfsyn E E Tjx Ag Reap

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), produsen pengendali: FANUC, diameter sekrup: 26 mm, FANUC Roboshot S100iA ini diproduksi pada tahun 2021. Mesin ini memiliki gaya penjepit sebesar 100 ton, ideal untuk proses injection molding presisi elektrik. Pertimbangkan kesempatan untuk membeli mesin injection molding elektrik FANUC Roboshot S100iA ini. Hubungi kami untuk informasi lebih lanjut. • 35.099 jam = diameter sekrup 32 mm Iasdeyam E Sepfx Ag Rsp • 32.691 jam = diameter sekrup 32 mm • 29.023 jam = diameter sekrup 26 mm • Opsional: Sistem penanganan Wittmann

Tahun pembuatan: 2015, jam operasional: 38.845 h, Kondisi: siap digunakan (bekas), produsen pengendali: FANUC, berat keseluruhan: 4.400 kg, diameter sekrup: 16 mm, FANUC Roboshot S50iA ini diproduksi pada tahun 2015. Ini adalah mesin injeksi molding elektrik dengan gaya penutup 50 ton dan diameter sekrup 16/20 mm. Bobot mesin ini 4,4 ton dan bekerja dengan pasokan listrik 200 V~50/60 Hz atau 220 V~60 Hz. Manfaatkan kesempatan untuk membeli mesin injeksi molding elektrik FANUC Roboshot S50iA ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. • Pasokan listrik: 200 V~50/60 Hz, 220 V~60 Hz Iedpoyam Hijfx Ag Rjap • Opsional: Penanganan Wittmann

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, gaya penjepit: 2.200 kN, diameter sekrup: 70 mm, berat injeksi: 172 g, Arburg 570 S 2200-800/290 ini diproduksi pada tahun 2020. Mesin ini dilengkapi dengan sistem penggerak hidrolik dan kontrol Selogica untuk pengoperasian yang presisi. Dengan gaya clamping 2.200 kN dan diameter sekrup 40 mm, mesin ini sangat ideal untuk tugas injection molding yang detail. Manfaatkan kesempatan ini untuk membeli mesin injection molding hidrolik Arburg 570 S 2200-800/290. Hubungi kami untuk informasi lebih lanjut. Unit Pengunci • Jarak antara tie bar: 570 × 570 mm • Stroke pembukaan: 650 mm • Gaya ejektor: 70 kN • Stroke ejektor: 200 mm Unit Injeksi • Ukuran unit injeksi: 290 • Tekanan injeksi: 2.500 bar • Volume shot: 188 cm³ Iajdpfx Asx Nkp Ijg Rjp Penggerak & Kontrol • Sistem penggerak: Hidrolik • Kontrol: ARBURG Selogica

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-GB Ijdpfx Agsx D Rqro Roap

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, berat injeksi: 1.464 g, tinggi total: 2.500 mm, berat keseluruhan: 25.500 kg, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, panjang produk (maks.): 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection moulding machine from Germany features a clamping force of 4,200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1,464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1,200 cycles/h, it is ideally suited for high-volume production. Contact us for more information about this machine. • Electrical Data: Iodpfx Ageydnp Hj Roap • Power supply: 400 V / 3N~ / 50 Hz • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycle (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine colour: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Force of moving platen (open/close): 124.7 / 102.4 kN • Platen dimensions: 1,270 × 1,200 mm • Mold opening stroke: 1,020 mm • Minimum mould height: 380 mm • Ejector stroke: 250 mm • Moving platen travel: 1,400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle aperture diameter: 6 mm • Injection pressure: 1,856 bar • Injection volume: 1,608 cm³ • Injection capacity: 478 cm³/s

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 13.361 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, produsen pengendali: ARBURG, This Arburg 520S-1500-400 injection molding machine was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-driven dual-circuit pump system for precise movements. The SELOGICA direct control with a 15-inch touchscreen enhances user convenience. Take advantage of this opportunity to purchase this hydraulic Arburg 520S-1500-400 injection molding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced two-stage clamping program • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High-wear resistant version; sintered metal non-return ring; CrN coating on screw and non-return ring Isdpfsyg I Egsx Ag Roap • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2: servo-driven dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Additional equipment • None listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), jumlah sumbu: 3, This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and processes sheet thicknesses up to 6 mm. Equipped with a rotating tool changer, it offers versatile punching options and an operator-friendly CNC control system. Its compact design saves space while ensuring a robust and durable construction. Ideal for series production as well as small to medium batch runs. Contact us for further information on this machine. Machine Advantages Technical Features • Working area: approx. 1270 × 2000 mm • Maximum sheet thickness: up to 6 mm (standard setup) • Rotating tool changer for versatile punching applications • High precision and repeatability • User-friendly CNC control • Compact and space-saving design • Fast tool change for improved efficiency • Robust and durable construction • Automated sheet clamping for consistent results • Suitable for batch production and small to medium production runs Isdpfxsyaihvo Ag Rjap

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), diameter sekrup: 45 mm, Arburg Allrounder 630S 2500-675 ini diproduksi pada tahun 2003. Ini adalah mesin injection molding hidrolik dengan diameter screw 45 mm. Pertimbangkan kesempatan untuk membeli mesin injection molding hidrolik Arburg Allrounder 630S 2500-675 ini. Hubungi kami untuk informasi lebih lanjut. Iaodpfx Agjyaizie Rjp

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), diameter sekrup: 40 mm, Krauss Maffei 150-520 C2 ini diproduksi pada tahun 2002. Mesin ini memiliki diameter sekrup 40 mm dan dilengkapi dengan robot Sepro serta konveyor penyimpanan dari tahun 2014. Mesin dalam kondisi siap pakai, dengan 50.327 jam operasi pompa dan 36.908 jam operasi otomatis. Manfaatkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 150-520 C2 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Iodpfx Agex D Hxls Rsap

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has operated for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for further information. • The dosing unit (orange section) is not included. • Integrated socket combination, country-specific • Disconnectable via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the moving mould mounting platen; • Programmable, supply via central air connection • Including hoses. Inputs and outputs are freely programmable; 3 inputs and 3 outputs; Iodpfxjx D Nlus Ag Rsap • Terminal outside of the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via directional control valve on moving platen; Q-independent (programmable); • With pilot-operated non-return valves to prevent core drift • Mould mounting dimensions E (similar to Euromap March 96) • With lateral ejector plate, locating diameter of fixed platen: 160 mm • Locating diameter of moving platen: • Increased mould installation height by 100.0 mm • Min: 340 mm • Max: 790 mm