Beli Mesin frais – universal konvensional, pergerakan X 0–399 mm bekas (57)

Kondisi: bekas, Tahun pembuatan: 1973, Weight 3 t X-travel 1000 mm Machine no.: 110 Bedpfx Aewzyt Tjf Solp Head swiveling +/- yes

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 in special light gray paint finish with new 3-axis K+C digital readout Technical Data: >> Machine No. 5983, Year of Manufacture: approx. 1975 >> Fixed angle table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 taper >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Equipment: >> 3-axis digital readout by K+C, newly installed with manufacturer's warranty. Display unit: Set reference and zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, bolt hole patterns, radius milling functions, etc. >> Operating manual for digital readout >> Coolant system About the Machine: Bsdju I Rm Nepfx Af Sslp Offered is a Deckel FP2 universal milling machine in good condition. The Deckel shows minimal backlash on the handwheels, and all spindles move smoothly. The machine has been completely disassembled and newly painted. An oil change has been performed. Mechanically and electrically tested. The K+C digital readout makes operation easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: bekas, 1 Bedpfjr D T Uyjx Af Selp

Kondisi: bekas, Tahun pembuatan: 1986, x-travel 390/410 mm y-travel 290/310 mm z-travel 380/400 mm Total power requirement 4 kW Machine weight approx. 1.25 t Bjdpfjvylkcjx Af Sjlp Space requirements approx. 2100x2100x1700 mm For technical data, see attachment

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Rectangular vertical table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed angle table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 250 mm Universal tilting table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 350 mm Swivel range in three planes, either side: 30°- 45°- 30° Spindle taper: - Horizontal spindle head: Iso 30 (40) - Vertical spindle head: Iso 30 (40) - High-speed universal head: SV E20+ES20 Swiveling in the vertical plane: Vertical spindle head: 360° Longitudinal travel (manual/automatic): 320/300 mm Vertical travel (manual/automatic): 375/355 mm Cross travel (adjustment handwheel): 150 mm Bedpfx Aow Uc Npsf Solp Quill stroke: 60 mm Micrometer drum reading accuracy: 0.02 mm Main motor kW-rpm: 1.5/1500 Rapid traverse/feed motor kW-rpm: 0.45/3000 Coolant pump motor kW-rpm: 0.15/3000 Spindle speed range: - 1st range rpm: 58-375 - 2nd range rpm: 330-2000 Working feeds – longitudinal or vertical, mm/min: 12-400 - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical), mm/min: 1200 Unless stated otherwise, all technical data provided is without commitment and subject to possible errors or omissions.

Kondisi: bekas, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Manual travel paths X: 300 mm Y: 160 mm Z: 330 mm Bedpsr D T U Defx Af Solp Table size 600 x 210 mm Spindle taper SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed in X and Y axes 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.4 and 1.8 kW, pole-changeable Mains connection 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill stroke on vertical milling head 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Free-standing control cabinet - Original chip tray for mounting on machine base - Electrical schematic available Required space (L x W x H) 1350 x 1100 x 1700 mm Weight 770 kg Very good condition

Kondisi: bekas, TECHNICAL DATA - Travels: 320 x 150 x 375 [mm] - Distance vertical spindle - table surface: 310 [mm] - Distance horizontal spindle - table surface: 410 [mm] - Spindle speeds (stepwise adjustment): 58-2000 [rpm] - Spindle taper: ISO 30 Blodpsuhbw Nofx Af Ssp - Feeds: 12-400 [mm/min] - Rapid traverse: 1200 [mm/min] - Power supply: 3 x 380 [V/50 Hz] - Motor power: 1.5 [kW] - Total installed power: 2.1 [kW] - Machine dimensions: 1500 x 1100 x 1600 [mm] - Machine weight: approx. 700 [kg] EQUIPMENT - Swiveling vice - Coolant system

Kondisi: bekas, xweg400de Bsdpfoyutv Hex Af Sslp

Kondisi: baik (bekas), mk_ftn_20240626 Blsdpfxjxl E Sgo Af Ssp

Kondisi: baik (bekas), x-lintasan 315 mm y-lintasan 180 mm Bjdpfx Afexl E Sms Selp z-lintasan 320 mm Kerucut spindle utama: ISO 40 Permukaan pemasangan meja: 600 x 250 mm Alur-T sebanyak 5 buah Kecepatan putar: 45,0 - 1950 rpm Feed variabel: 10 - 170 mm/menit Tegangan: 400 V Kebutuhan daya total: 5,1 kW Berat mesin: kira-kira 1300 kg Dimensi P-L-T: 1000 x 1400 x 1800 mm Dari bengkel pelatihan kejuruan Kondisi terawat (!!) Perlengkapan: - Mesin milling universal elektro-motor yang kokoh - Indikator digital 3-sumbu HEIDENHAIN - Kepala milling universal dapat diputar (kanan/kiri = 90°) - Feed spindle milling manual, dapat dikunci - Meja pemasangan alur-T yang kokoh - Feed sumbu dengan rapid traverse pada sumbu X+Z+Y * Rapid traverse variabel - Lampu mesin yang dapat diputar - Panel kontrol terpasang di sebelah kiri - Perlengkapan pendingin

Kondisi: bekas, x-Weg 315 mm y-Weg 180 mm z-Weg 320 mm Nutenanzahl 5 Nutenbreite 14 mm Werkzeugaufnahme ISO 40 DIN 2079 Spindeldrehzahlen - stufenlos 45 - 1950 U/min Vorschübe stufenlos 10 - 170 mm/min Eilgang 4 m/min Gesamtleistungsbedarf 5,1 kW Maschinengewicht ca. 1400 kg Bjdpjxwdvhefx Af Sjlp Raumbedarf ca. 3000 x 2700 x 1800 mm - robuste / leistungsstarke Universalfräsmaschine - Digitalanzeige HEIDENHAIN - Kühlmitteleinrichtung - drehbarer Universalfräskopf (re/li = 90°)

Kondisi: bekas, Tahun pembuatan: 1976, d396df65 Blsdpfjyqv Dfsx Af Sjp

Kondisi: sangat baik (bekas), 001 Bodpfxjy Iz Rms Af Sslp

Kondisi: bekas, Universal tool milling machine DECKEL Type FP 1 Machine No. 52185 Year of manufacture: 1968 Traverses X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 steps Motor power 1.0 and 1.4 kW, pole-changeable Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gear steps - Quill stroke on vertical milling head 60 mm - Fixed angle table - Coolant system integrated in the machine base - Separate control cabinet - Counter support with counter bearing for horizontal milling SK 40 Space requirements (L x W x H) 1200 x 1100 x 1600 mm Bsdpfedzqb Sex Af Sslp Weight approx. 1000 kg Very good condition

Kondisi: bekas, Tahun pembuatan: 1986, Technical details: X-axis travel: 1120 mm Y-axis travel: 345 mm Z-axis travel: 400 mm Spindle taper: ISO SK50 Swiveling spindle head left and right: 90° Distance from rear edge of table to column guide, min./max.: 125 / 470 mm Spindle torque: 280 kpm Spindle speed range: 28 – 1400 RPM / 18 steps Feed rate: X/Y: 16 – 800 mm/min, Z: 5 – 250 mm/min Table size: 1600 x 460 mm Clamping area on table: 1400 x 330 mm Table load capacity: 1.5 t Total power requirement: 14.5 kW Approx. machine weight: 3900 kg Approx. machine dimensions (LxWxH): 2.7 x 2.0 x 2.1 m Bodpfx Afju Iy Hle Sjlp Control cabinet dimensions: 0.47 x 0.8 x 1.5 m Equipment: 3-axis digital readout EISTA VISULESTA II E Accessories: Machine vise 155 mm 2x supports and shaft 4x machine feet 2x handwheels (for table and for vise)

Kondisi: bekas, Mesin Frais Alat Universal DECKEL Tipe FP 1 No. Mesin 51265 Tahun Pembuatan sekitar 1967 Perjalanan sumbu X: 300 mm Y: 150 mm Z: 340 mm Ukuran meja 600 x 200 mm Taper spindle SK 40 - S20 x 2 Kecepatan spindle 40-2000 rpm, 16 tingkat Daya motor 1,0 dan 1,6 kW, bisa pengalih kutub Koneksi listrik 380 Volt, 50 Hz - Feeding pada sumbu X dan Z - Kecepatan spindle melalui 2 kecepatan motor dan 8 tingkat transmisi - Gerakan pinol pada kepala frais vertikal 60 mm - Meja sudut dapat diputar, diputar-putar, dan dimiringkan - Pompa pendingin di kaki mesin - Lemari kontrol terpisah Bsdpfx Ajghtvaef Selp Dimensi ruang yang dibutuhkan P x L x T 1100 x 1100 x 1600 mm Berat 690 kg dalam kondisi baik

Kondisi: bekas, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 28317 Year of manufacture: approx. 1960 Travel distances X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Horizontal spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Bodjiy Ekvopfx Af Sslp Motor output 0.8 and 1.1 kW, pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gearbox stages - Feed in X- and Z-axis - Coolant system with mechanical pump integrated in the machine base - Quill travel on vertical milling head 60 mm - Vertical milling head swivels +/- 90° - Metal base made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg in good condition

Kondisi: bekas, Mesin Milling Universal dengan Display Digital Aktif DECKEL Tipe FP 1 Mesin Milling Universal No. Mesin: 2101 - 7088 Tahun Pembuatan: 1993 Lintasan gerak: X: 300 mm, Y: 150 mm, Z: 330 mm Bledoziny Iopfx Af Sjp Ukuran meja: 600 x 200 mm Konektor spindle: SK 40 - S20x2 Kecepatan spindle: 40-2000 rpm, 16 tingkat Feed sumbu X dan Y: 5 hingga 500 mm/menit Rapid traverse: 1200 mm/menit Daya motor: 1,6 dan 2 kW, dapat dipindah kutub Koneksi listrik: 380 Volt, 50 Hz - Kontrol aktif dan display digital untuk 3 sumbu HEIDENHAIN Tipe TNC 123 - Feed variabel tanpa tingkat melalui servomotor pada sumbu X, Y, dan Z - Kecepatan spindle melalui 2 kecepatan motor dan 8 tingkat transmisi - Perpindahan pinole pada kepala vertical milling 60 mm - Kepala milling vertikal dapat diputar dan ditarik horizontal 100 mm - Meja sudut DECKEL tipe 2114, bisa diputar, dimiringkan, dan diputar berulang - Sistem pendingin cair di bagian kaki mesin - Sistem pelumasan sentral - Panel kontrol terpisah - Pelindung jendela lipat dengan sakelar pengaman - Tray serbuk original untuk dipasang di kaki mesin - Diagram kelistrikan tersedia Kebutuhan ruang (P x L x T): 1600 x 1200 x 1770 mm Berat: 900 kg Kondisi baik

Kondisi: bekas, Universal tool milling machine DECKEL Type FP 1 Mach. No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travels X: 300 mm Y: 150 mm Z: 330 mm Bledpfsdzp T Eex Af Sep Table size 600 x 210 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 1.1 and 1.4 kW Electrical connection 380 Volt, 50 Hz - Feed on X and Y axes - Quill feed on vertical milling head - Fixed angle table - Coolant unit with mechanical pump integrated in machine base - External control cabinet with plug-in cable connection Space requirement (L x W x H) 1100 x 900 x 1600 mm Weight approx. 900 kg Good condition Machine overhauled in 2012

Kondisi: bekas, Technical Specifications: X-axis travel: 200 mm Y-axis travel: 450 mm Z-axis travel: 460 mm Control: Siemens 802S base line Spindle mount ISO: ER 32 Tiltable spindle head, left and right: no Speed range: 150 - 8,600 rpm Feed rate X/Y/Z: 2,000 - stepless mm/min Table clamping surface: 750 x 210 mm Interface: 232 Total power requirement: 3 kVA Weight approx.: 760 kg Machine dimensions approx. LxWxH: 1.9 x 1.2 x 2.1 m Table travel: X-axis: 200 mm and Y-axis: 450 mm Spindle vertical Z-axis: 460 mm Max. tool holder for milling cutter: Ø 20 mm Blodpfxsu Ndcaj Af Sjp Drilling capacity steel: Ø 13 mm Max. distance spindle to table: 470 mm Equipment: Electronic handwheel Coolant system Central lubrication Internal machine lighting Machine feet

Kondisi: bekas, en1-Technical Details: Travel path – Y-axis: Saddle on beam: 200 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table mounting surface: Attachment area: 760 x 200 mm Table clamping area: 630 x 200 mm Max. table load: 100 kg X-travel: table longitudinal: 320 mm Z-travel: table vertical: 350 mm Table swivels +/-: left/right 30° each Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table feed: Infinitely variable 14 - 71 mm/min Total power requirement: 4.0 kW Weight approx.: 1,200 kg Machine dimensions (LxWxH) approx.: 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital readout for X and Y axes. Swiveling work spindle. Feed operates via variator gearbox. Swiveling table. Spindle rotational speed via 3-stage gear and 2-stage electric selection. Coolant system. Blodpfx Aou Ndb Aef Ssp Milling beam extendable by approx. 350 mm. The machine vice is recommended but not included in the scope of delivery. Can be purchased as an optional extra. *

Kondisi: baik (bekas), A lot of accessories included; only sold as a complete package! Axis travel X / Y / Z: 300 / 300 / 135 mm Table size (W x D): 700 x 190 mm Spindle speed: 95 - 6000 rpm / 11 steps Tool holder: W 20 Blodpfx Afod Erqbs Sjp Weight: approx. 450 kg Machine dimensions (W x D x H): approx. 900 x 900 x 1500 mm Accessories: Swivel table Rotary table, Ø 200 mm 6 holders Various collets and clamping tools Horizontal milling attachment Work lamp Coolant system Machine vice

Kondisi: baik (bekas), Manufacturer: WMW VEB Type: FW 200×630 Blodpeik Hcuefx Af Sop X-Y-Z travel: 380 – 140 – 230 mm Table size: 200 x 630 mm

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, - FAGOR 3-axis position indicator, model: 400iB INNOVA - Milling head swivels manually ±90° - Manual tool clamping via drawbar M16, for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axes - Ball screws on X/Y/Z axes - Gearbox with 12 spindle speeds - Outrigger with support bearing - 1 pc. long milling arbor 27 mm - 3 pcs. reducing sleeves (MT1, MT2, MT3) - Spindle guard with safety switch - Splash protection on three sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - X/Z axis covers - Operating tools - Technical documentation - CE-conform version Paintwork: - RAL 7024 – Graphite Grey - RAL 7035 – Light Grey Technical Data: Fixed angle table: - Table size: 845 x 390 mm - T-slots: Quantity / width x spacing: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Table size: 950 x 250 mm - T-slots: Quantity / width x spacing: 3 pcs. / 14 x 63 mm Travel paths: - Axis travels: automatic/manual - Longitudinal (X): 420 mm - Cross (Y): 220 mm - Vertical (Z): 380 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 Bsdpfx Afjvt Tn Ao Sjlp - Speed range: 65 - 2,600 rpm - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 – 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: ±90° - Distance spindle nose / table: 90 – 470 mm - Distance spindle center to column – min./max.: 120 – 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 – 2,600 rpm - Distance spindle center / table: 100 – 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 – 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motors (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions & weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Tahun pembuatan: 1969, Kondisi: bekas, nomor mesin/kendaraan: 304, Manufacturer: Hermle Model: FW 800 Machine No.: 304 Year of Manufacture: 1969 Weight: approx. 1000 kg General / Technical Data: Well-maintained used horizontal milling machine with hydraulic program control (camshaft control rail) for automatic production processes Spindle taper: SK 30 Travel paths: X 400 mm / Y 370 mm / Z 165 mm Spindle speeds: 18 steps mechanically shifted in 2 motor stages 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 1000, 1210, 1420, 1780, 2030, and 3050 rpm Feeds: infinitely variable hydraulically in the X and Y axes, manually in Z (horizontal milling spindle) Table dimensions (fixed table): 800 mm x 220 mm Power supply / spindle drive power: 380 Volt, 50 Hz / 1.5 kW Approx. machine dimensions (LxWxH): 1900 mm x 1100 mm x 1700 mm Accessories / Special equipment: - Fixed milling table - Lot of various tool holders - Swarf tray - Coolant system Blsdjdgrwdepfx Af Sjp - Machine documentation with programming instructions Remarks The machine is in very good condition for its age. It is specifically designed for production applications in small and medium-sized series. The machine features a simple, cam switch-controlled hydraulic program control.