Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP4M Aktiv Manufacturer: Deckel Model: FP4M Condition: Used, good Digital readout: 3-axis Heidenhain digital display Travel paths: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Clamping table surface: approx. 700 x 400 mm Speed range: approx. 50 – 2500 rpm Tool holder: ISO 40 Tool clamping: hydraulic Drive power: approx. 6.0 kW Feeds & rapid traverses: on all 3 axes Feed range: approx. 8 – 630 mm/min Rapid traverse: approx. 3.0 m/min Dimensions (L x W x H): approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine lamp Hjdsyub Auepfx Ag Reni Spindle guard Scope of delivery: – 10x tool holders – Allmatic high-pressure vise – Documentation – Spindle guard

Kondisi: baik (bekas), 1 mesin frais alat bekas Merek: Emco Tipe: FB 6 Kontrol: Heidenhain TNC 124 Dimensi area kerja meja: 900 x 500 mm Pergerakan X: 700 mm Pergerakan Y: 500 mm Pergerakan Z: 500 mm Hodpfxjyt Htcj Ag Roni Taper spindle: ISO 40 Kecepatan spindle: 0 - 3150 rpm Dimensi mesin (P x L x T): 2220 x 2115 x 2120 mm Berat mesin: 2550 kg

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 350 mm, kecepatan pemakanan sumbu X: 5.000 m/menit, laju pemakanan gandar Y: 5.000 m/menit, laju pemakanan sumbu Z: 5.000 m/menit, tinggi total: 2.200 mm, lebar total: 2.300 mm, panjang total: 1.990 mm, lebar meja: 400 mm, panjang meja: 800 mm, kecepatan rotasi (min.): 5.000 rpm, beban meja: 300 kg, berat keseluruhan: 2.200 kg, Universal milling machine with toolmaker's precision Small batch production up to complex workpieces Vertical milling head with hydraulic tool clamping, Y and Z milling axes Hedpfoyucc Njx Ag Rjni Handwheels on all three axes Linear guides on all three axes Retractable work area cover with large chip protection Main motor with spindle brake X-axis travel: 450 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Max. table load: 300 kg Feed rate X-axis: 5,000 mm/min Feed rate Y-axis: 5,000 mm/min Feed rate Z-axis: 5,000 mm/min Tool holder: ISO 40/BT/MK Spindle power: 10 kW Spindle speed: 5,000 rpm Length: 1,990 mm Width: 2,300 mm Height: 2,220 mm Weight: 2,200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, this does not constitute representation or contractual terms. We recommend that you verify all essential details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 350 mm, kecepatan pemakanan sumbu X: 5.000 m/menit, laju pemakanan gandar Y: 5.000 m/menit, laju pemakanan sumbu Z: 5.000 m/menit, tinggi total: 2.220 mm, lebar total: 2.300 mm, panjang total: 1.990 mm, lebar meja: 400 mm, panjang meja: 800 mm, beban meja: 300 kg, berat keseluruhan: 2.200 kg, Universal milling machine with toolmaker precision Suitable for small-batch production as well as complex workpieces Vertical milling head with hydraulic tool clamping Milling in Y and Z axes Handwheels on all three axes Linear guides on all three axes Retractable work area safety enclosure with large chip protection Main motor with spindle brake X-axis travel: 450 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Table load capacity: 300 kg Feed X-axis: 5000 mm/min Feed Y-axis: 5000 mm/min Feed Z-axis: 5000 mm/min Tool holder: 40 ISO/BT/MK Hodjyub Udspfx Ag Rjni Spindle power: 10 kW Spindle speed: 5000 rpm Length: 1990 mm Width: 2300 mm Height: 2220 mm Weight: 2200 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all critical details independently.

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Hjdpfsytnd Aex Ag Rjni Table size: 800 x 400 mm Spindle speed range: 63 - 3150 rpm / 18 steps Infinitely variable feed: X/Y/Z: 8 - 800 / 8 steps mm/min Spindle taper: SK 4 Spindle head swivels left and right: 90° Quill stroke: 105 mm Total power requirement: 5.3 kW Machine weight approx.: 2245 kg Machine dimensions LxWxH: 2.1 x 2.8 x 1.9 m Control screen replaced with a new LCD. The milling machine is equipped with a PROTOTRAK MX2 digital readout system. The X and Y axes can be run in cycles (interpolating); the Z axis is operated manually. Spindle with forward/reverse rotation Automatic tool clamping via control command Coolant system (without tank) Chip collection tray Tooling accessories (as shown in photo) *

Kondisi: bekas, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 24 rpm, kecepatan spindel (min.): 1.685 rpm, lebar meja: 700 mm, panjang meja: 4.000 mm, berat keseluruhan: 1.300 kg, Mesin frais meja tetap ZAYER Mod. 3500 BF Bekas Perjalanan sumbu X 3.500 mm Perjalanan sumbu Y 1.000 mm Perjalanan sumbu Z 1.000 mm Ukuran meja 4.000x700 mm Kepala birotational tipe HURON Kerucut spindle ISO 50 Putaran spindle 28-1.800 rpm Display digital posisi sumbu termasuk Hedpfx Aeytp S Ijg Rjni

Kondisi: bekas, Tahun pembuatan: 1982, Travel range X-axis 300 mm Travel range Y-axis 160 mm Travel range Z-axis 340 mm Infinitely variable feed rates 5–500 mm/min Hsdpfsvvnfuex Ag Rjni Rapid traverse 1200 mm/min Spindle speeds 40 – 2000 rpm Tool holder DIN taper 40 Table length 600 mm Table width 120 mm Operating voltage 380 V Frequency 50 Hz Rated current 13 A Machine weight approx. 0.75 t Space requirement approx. 1.8 x 1.5 x 1.8 m DESCRIPTION Machine includes: active 3-axis digital readout HEIDENHAIN documentation attachments machine vice, etc.

Tahun pembuatan: 1990, Kondisi: bekas, trans_001 Hnjdpfxoyt Rwrj Ag Rji

Kondisi: bekas, Tahun pembuatan: 1990, translated-machinetool-specs-de-hu Hnjdpfx Asyt Rwljg Rji

Kondisi: bekas, Tahun pembuatan: 1992, tw6u-01 Hnodsyt R R Eepfx Ag Rji

Kondisi: baik (bekas), 2 angle plates for fixed-bed milling machines Dimensions: - Angle plate 1: 370x620x2000 mm Hnodeudvh Ijpfx Ag Rsi - Angle plate 2: 370x615x2000 mm

Tahun pembuatan: 1991, Kondisi: baik (bekas), Used bed type milling machine Brand: LAGUN Model: FBF 1200 Year: 1991 Serial No.: B10109 Weight: 5,500 kg Dimensions: 2600 x 2300 x 2600 (h) mm Control: HEIDENHAIN TNC 355 (new screen) Table size: 1200 x 550 mm Axis travels: X - 1100 mm Y - 600 mm Z - 600 mm Universal milling head with hydraulic tool clamping. Spindle taper: ISO 50 Spindle speeds: 50 - 3000 rpm (2 speed ranges) Feed rates for X/Y/Z axes: 1 - 3000 mm/min Rapid traverse X/Y/Z: 10,000 mm/min Main motor power: 15 kW Hjdpoh Rycfsfx Ag Reni

Kondisi: bekas, Diameter: 630 mm Tinggi: 170 mm Dasar kepala pembagi di atas meja: 690 mm Kepala tirus: Morse 5 / 65 mm Berat yang diizinkan: 550 kg Berat kepala pembagi: 302 kg Hnjdpfx Agsw H Rmzj Rsi

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, lebar meja: 700 mm, panjang meja: 2.032 mm, berat keseluruhan: 5.800 kg, Merek: Zayer Model: 66BM No. seri: 35909 Display posisi 3 sumbu Fagor 30i-M Ukuran meja: 2032 x 700 mm Perpindahan otomatis: - X: 1.524 mm - Y (Carnero): 1.016 mm - Z: 560 mm Kones ISO 50 Hnjdpfx Aoyc R Naeg Rei Jumlah kecepatan: 18 Kecepatan (Min./Maks.): 28-1800 rpm Feed sumbu: - X: 2 - 1.016 mm/menit - Y (Carnero): 2 - 1.016 mm/menit - Z: 1 - 700 mm/menit Rapid traverse: X, Y (Carnero): 2.400 mm/menit Z: 1.600 mm/menit Motor: 15hp (kecepatan) + 3,5hp (feed) Berat: 5.800 kg Dilengkapi manual lengkap dan buku suku cadang.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Used CNC Horizontal Boring and Milling Machine Brand: AYCE Model: AC100-k4 Serial No.: 740 Year: 1998 Power: 16 kW Weight: 12,700 kg MODEL AC100-K4 WITH CONTINUOUS FEED VARIATION Numerical Control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bed supports: 4 (K4) OPTIONS: - Heidenhain CNC - Automatic rotary table positioning 4 x 90° - Vertical travel 1200 mm (instead of the 1000 mm standard for this model) - Coolant system - Facing plate and clamping arm - Universal vertical head, Hurón-type, with hydraulic tool clamping - Steady rest for 1200 mm vertical travel - 4th AXIS (B) table rotation digital readout Main spindle: - Spindle diameter: 100 mm - Internal taper: ISO 50 with quick-action tool clamping (instead of Morse 5) - Milling cutter holder diameter: 171.45 mm - Horizontal spindle travel: 700 mm - Vertical spindle travel: 1200 mm - Number of spindle speeds: 18 - Speed range: 12–1200 rpm - Maximum distance between plate and steady rest: 2250 mm Feeds: - Number of working feed rates in all directions: UNLIMITED - Min/max working feeds: 2–1500 mm/min - Rapid traverse on carriages and head: 3000 mm/min - Rapid traverse – main spindle: 1500 mm/min - Rapid traverse – table rotation: 600 degrees/min Rotary Table: - Rotary table dimensions: 1100 x 1200 mm - Longitudinal travel (without steady rest): 1500 mm - Longitudinal travel (with steady rest): 1200 mm - Cross travel: 1700 mm - Max. distance between spindle axis/table center without steady rest: 1975 mm - Max. distance between spindle axis/table center with steady rest: 1600 mm Automatic centralized lubrication. Hnjdpoizxbijfx Ag Rei Hardened and ground guideways. Telescopic way covers. Ball screws on all 3 axes. Automatic hydraulic locks on all axes.

Kondisi: baik (bekas), Used Boring Machine Brand: Juaristi Model: MDR 75 Weight: 5,600 kg Motor power: 10 kW 2-axis FAGOR digital readout. Spindle diameter: 75 mm Longitudinal travel (X-axis): 1,150 mm Vertical travel (Y-axis): 700 mm Column transverse travel (W-axis): 800 mm Spindle quill travel (Z-axis): 500 mm Table surface: 900 x 700 mm Hedpjh Ryc Hofx Ag Reni Spindle speeds: 22–1,055 rpm Number of feeds: 9, from 0.04–3 mm/rev.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, jam operasional: 9.925 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 750 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 55 m/menit, produsen pengendali: Heidenhain, model controller: TNC 640, lebar meja: 900 mm, panjang meja: 1.150 mm, beban meja: 2.000 kg, berat keseluruhan: 22.000 kg, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 9.925 h, pasokan pendingin: 80 batang, panjang alat: 500 mm, diameter alat: 160 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours since replacement! Year of manufacture: 2015 Control: Heidenhain TNC 640 Travel distances: Hnjdpfx Agjygx Hns Rei X: 1000 mm Y: 1100 mm Z: 750 mm A: +100° / -130° C: 360° Table load capacity: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD Active vibration damping - ACC Active chatter suppression - AFC Adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle taper: HSK-A63 - 60 tool stations - 9-fold rotary union - Scraper belt chip conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic handwheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip flush nozzle - ... etc. The machine is available immediately! The machine is in excellent condition, free of defects! All maintenance carried out by Hermle! Spindle replacement also carried out by Hermle! Invoice and measurement protocol are available!

Kondisi: siap digunakan (bekas), tinggi total: 3.870 mm, lebar total: 3.417 mm, panjang total: 10.994 mm, produsen pengendali: Heidenhain TNC 530, berat kosong: 23.500 kg, FBF-S 6000 4-sumbu simultan X/Y/Z + meja putar Pendinginan tekanan tinggi melalui spindle (20 bar) Sumbu keempat di meja (baik horizontal maupun vertikal), diameter 1000 mm Kepala frais universal CNC, pengindeksan setiap 2 x 2,5° Hsdsyt S Urjpfx Ag Roni Sistem pengukuran Renishaw Sistem pelumasan sentral Penukar alat dengan 40 posisi Meja T-slot Stolle disertakan 7000 x 1500 mm Konveyor serpihan Semua dokumentasi, sertifikat CE, parameter, dll. Hanya sekitar 500 jam kerja karena bangkrut akibat hilangnya kontrak Perkeretaapian Nasional Prancis Perjalanan longitudinal sumbu X: 6000 mm Perjalanan melintang sumbu Y: 1200 mm Perjalanan sumbu Z (ketinggian): 1500 mm Daya poros utama: 30 kW Adaptor spindle kepala frais (ISO): ISO 50 Rentang kecepatan maksimum: 40 > 4000 rpm

Kondisi: bekas, Tahun pembuatan: 2011, Technical details: X-axis travel: 8,500 mm Hnodpsytrw Tjfx Ag Rsi y-axis travel: 2,000 mm z-axis travel: 1,500 mm Rapid traverse x/y/z: 25 m/min Table size: 10,000 x 1,350 mm Table load capacity: max. 5 t/m² Universal milling head: orthogonal, 1° x 1° Tool holder: SK 50 Spindle speed range: 4,000 rpm Drive power: 37 kW Spindle torque: 900 Nm Internal coolant supply: 15 bar CNC control: HEIDENHAIN iTNC 530 Tool changer: 60 positions Total connected load: 75 kW Space requirements (LxWxH): approx. 12.7 x 5.2 x 4.6 m Machine weight: approx. 35 t Universal travelling column machining center, with orthogonal milling head, water-cooled, 1° indexing in 2 axes (360 positions in the rear and 270 positions in the front plane), 3D wireless probe M&H 20.41, partition wall for parallel operation/setup, internal air blast, internal coolant supply 15 bar, adapter for high-speed milling spindles with torque support, operator platform travels with machine, chip conveyor, electronic handwheel HR 410, monitored safety fences. Various accessories (angle milling heads, clamps, etc.) available as options. Approx. 39,000 power-on hours, approx. 16,000 spindle hours. Still under power and available for viewing at the current location.

Kondisi: sangat baik (bekas), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete and fully operational – ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, “Fritz Heckert” Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, protection 25 A • Mechanical and automatic feeds on all axes ✔ Equipment: • Heavy-duty machine vise mounted on the table • Work lighting • Coolant system • Complete control panel with adjustment dials and feed levers ✔ Advantages: • Very stable, heavy construction (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Fully functional and complete – ready for use immediately • 1000 mm table – enables machining of larger workpieces A reliable machine, not a lightweight Chinese build – only classic engineering from the era when machinery was built to last. Hodpsw Uab Njfx Ag Rjni

Kondisi: baik (bekas), jarak pergerakan sumbu X: 12.000 mm, jarak lintasan sumbu Y: 7.300 mm, jarak gerak sumbu Z: 3.000 mm, panjang total: 30.000 mm, panjang meja: 12.000 mm, lebar meja: 4.730 mm, lebar total: 12.000 mm, tinggi total: 10.475 mm, beban meja: 250.000 kg, berat keseluruhan: 400.000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Make: Waldrich-Siegen Model: PF-F-150(1)-530/400 Travel (X-axis): 12,000 mm Travel (Y-axis): 7,300 mm Travel (Z-axis): 3,000 mm Travel (W-axis): 4,000 mm Distance between columns: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table feed rate: 10,000 mm/min W-axis feed rate: 3,000 mm/min T-axis feed rate: 6,000 mm/min Transversely adjustable milling head Vertically adjustable crossbeam Horizontal hydrostatic ram Milling spindle Ø: 560 mm Tool holder: ISO 60 C-axis feed rate: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Hjdpjytrxkofx Ag Rjni Z-axis travel: 3,000 mm Z-axis feed rate: 2,000 mm/min Küma angular head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2,400 rpm Küma fixed head GB1D – 90 kW – 2,400 rpm Küma angular head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amp Coolant system: 4,000 liters – Coolant through the spindle 20 / 40 bar Machine overhauled in 2004 by Schiess Bed – Table group: - Renewal of slideways - Regrinding of guideways - Renewal of table drive - Direct linear measuring system - Hydrostatic guideways Gantry and crossbeam: - Modification of adjustment spindle - Trapezoidal spindle replaced by ball screw - Direct linear measuring system - New drive motors to increase feed speed of milling axes - New milling ram with hydrostatic guides Electrical system: - Complete new control cabinet - Complete new wiring - Siemens Sinumerik 840D control – 6 axes Equipment: - Completely new Raumag-Janich protective covers - Completely new double chip conveyor - Large tooling package - Extensive clamping devices Machine under power in Europe Available immediately Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine housings. Please note: The information on this page has been prepared by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you verify all important details.

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm Hnedewgdz Ejpfx Ag Rei

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Pengoperasian pertama: Maret 2010 Kontrol: Fidia dengan handwheel HPX21 Sumbu X: sekitar 11.500 mm Hnedpfx Agjytf H Io Rei Sumbu Y: sekitar 1.550 mm Sumbu Z: sekitar 2.550 mm Sumbu B: ± 210° Sumbu C: ± 104° Kecepatan spindle: maks. 16.000 rpm Tipe holder alat: HSK 50A Penggerak sumbu linier Kecepatan feeding sumbu X, Y, dan Z: 16 m/menit

Kondisi: siap digunakan (bekas), produsen pengendali: Heidenhain, en-nl-machine-description-translation-001 Hjdpfx Agjytyqzj Rsni

Kondisi: siap digunakan (bekas), tinggi total: 3.850 mm, lebar total: 4.190 mm, panjang total: 11.300 mm, produsen pengendali: Heidenhain, berat kosong: 22.000 kg, Kepala frais indeks CNC (2,5°) Hodjytyquepfx Ag Rjni Konveyor serbuk/serutan termasuk Opsional: mesin dapat dilengkapi dengan kontrol Heidenhain 320 baru Perjalanan memanjang sumbu X: 6500 mm Perjalanan melintang sumbu Y: 900 mm Perjalanan sumbu Z (Tinggi): 1600 mm Dimensi area penjepitan - meja: 8000 x 800 mm Daya pada spindle: 22/26 kW Jenis dudukan spindle kepala frais (ISO): ISO 50 Kisaran kecepatan maksimum: 20 > 3000 rpm