Beli Mesin bubut spindel pemandu/penarik, diameter pembubutan di atas ranjang 0–299 mm bekas (120)

Kondisi: baik (bekas), Tahun pembuatan: 2004, Multipurpose Lathe ELBERON Type: GRC300X750 Chuck: 130 mm In good condition. For technical specifications, please refer to the data sheets. Lhedpfx Agowah Rqjlsb

Kondisi: bekas, Tahun pembuatan: 1962, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 205 mm, lebar di tengah: 1.200 mm, lebar tempat tidur: 320 mm, berat keseluruhan: 1.200 kg, Mesin bubut poros pemandu dan penarik Meuser M0L - Tahun pembuatan: 1962 - Berfungsi penuh, terhubung listrik, siap demonstrasi - Tinggi senter: 205 mm - Jarak antar senter: 1200 mm - Lubang spindle: 47 mm - Kecepatan spindle: 28 - 1250 rpm - Lebar alas: 320 mm - Kebutuhan daya total: 5,5 kW - Dimensi mesin PxLxT: sekitar 2,30x1,10x1,25 m - Berat: sekitar 1200 kg Ledpfsx Ihanex Agljhb - Perlengkapan tambahan lengkap (lihat foto) - No. seri pabrik: M0L - 30158

Kondisi: baik (bekas), Tahun pembuatan: 1980, lathe-specs-en-2024 Ledpfxoxz Rfko Aglehb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Digital display Swing diameter 120 mm Turning length 700 mm Spindle speed 2000 rpm Lhodpfx Aswhrg Sjgljb Tailstock

Kondisi: diremaj di bengkel (bekas), Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 250 S Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey Machine no.: 069 Centre height: 125 mm Centre distance: 500 mm with warranty Geometric acceptance with test protocol Accessories: - 3-axis digital readout ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool post, base body Size A - Bed stop - Coolant system - Chuck guard, electrically interlocked - Chip guard/rear splash guard - Operating manual Lhedpfxopz Hubo Agleb - used, sold as inspected -

Tahun pembuatan: 1986, Kondisi: bekas, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Lhodpfsn Ard Dox Agleb

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet, 3-Axis Digital Readout by Fagor, from University Use Technical Data: >> Centre Height: 120 mm >> Distance Between Centres: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch Ljdpfxjxyh Ndj Aglehb >> Infinitely Variable Spindle Speeds: 30–3000 rpm Accessories: 3-axis digital readout by Fagor Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Tool holder >> Drill chuck; live centre >> Collet chuck system with collets >> Steady and follower rest >> Machine mounts >> and much more About the Machine: We offer a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. At high spindle speeds, the Lorch also runs quietly. The machine is equipped with a 3-axis digital readout from Fagor and comes with a wide range of accessories. It was previously installed in a university setting. Take advantage of the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 001 Lsdpfx Aex Emp Asglohb

Kondisi: baik (bekas), Tahun pembuatan: 1988, Lathe KMK 40, spindle speed 1800 rpm, turning length 1000 mm, equipped with 3-jaw and 4-jaw Multix chucks with 4 inserts, live center, faceplate, collet chuck with collet set. Ledpfx Agsu Uh U Iolohb

Kondisi: baik (bekas), Jarak antara ujung: 450 mm Tinggi ujung: 120 mm Lubang spindle: 23 mm Lhsdpfjw I A Uxsx Agleb Kecepatan: 40 – 3000 rpm Penggerak variabel kontinu dengan 3 tingkat transmisi & tampilan kecepatan digital Tailstock: MT 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1330 mm Pewarnaan: Reseda hijau RAL 6011 Tampilan digital: Opsional dengan biaya tambahan Aksesori: Aksesori lainnya tersedia sesuai permintaan

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Schaublin tipe 125B dalam kondisi sangat baik. Spesifikasi: - Diameter putar di atas alas: 270 mm - Jarak antara senter: 500 mm - Kecepatan putaran: 40-3000 rpm Aksesori: - Digital readout Heidenhain ND780 pada 2 sumbu - Dudukan pahat Multifix dengan 6 holder - Chuck 3 rahang self-centering dengan rahang dalam dan luar - Set roda gigi pengganti - 2 x chuck bor - Senter putar - Kaki mesin - Flens penggerak - Set collet dengan batang penarik Lhodpfx Agsx Auv Ajlsb - Pencahayaan mesin

Kondisi: baik (bekas), MOMAC SC 200 NC teach-in lathe Fagor 8050 TC CNC control system Year of manufacture: 1999 Max. turning diameter: 400 mm Max. turning diameter over bed: 200 mm Max. turning length: 1000 mm Spindle speed: 0-2300 rpm Spindle bore: 52 mm Tool changer: 8 positions 1x fixed steady rest 1x follow rest Including tool holders, additional jaws and documentation Lhjdott Atdopfx Agleb Machine is connected and ready for inspection

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: Lhedpfou Aftgsx Aglsb For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: Lhedpjvtp Edsfx Aglob >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Technical Data: Lhjdpevkfhpsfx Agleb • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake Lhodpfxjvivmys Agljb >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Weiler Primus VC Precision Centre Lathe, 3-Axis Digital Readout K&C NEW with VC Drive, stepless speed control, and CE conformity – very good condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard Ljdow Idllopfx Aglshb >> Machine feet >> Splash guard About the machine: Offered is a Weiler Primus VC lead and feed screw lathe, year of manufacture 2003, in very good original condition. This is a very well-maintained lathe with VC drive and stepless spindle speed control. The digital readout and scales by K&C are brand new. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site to verify its condition.

Kondisi: bekas, Precision lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre distance: 500 mm Swing over bed: 240 mm Centre height over bed: 120 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 23 mm Chuck mounting: M40 x 3.5 mm external thread Tailstock taper: MK 2 Quill adjustment / travel: 80 mm Lhedpfxjw Dvv Aj Agleb Spindle speed: 30 - 1300 rpm Drive power: 1.1 kW Electrical connection: 400 Volt, 50 Hz - 3-axis digital readout, RSF ELECTRONIC, Type Z503ST-220 - Position display, HEIDENHAIN Type VRZ 136B for the angular encoder - LCD display unit for auxiliary measuring devices - Spindle speed adjustable via 2 V-belt stages, 2 gearbox stages, and stepless via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks, Ø 100, 125, and 140 mm, with chuck jaws - QUICK-CHANGE tool post MULTIFIX size A with 8 toolholders - Vertical slide with clamping device - Multiple clamps and vices - Clamping plates and clamping tables - Clamping table as dividing head - Dividing head with collets and tailstock - Heavy-duty dividing head with clamping plate and handwheel drive - Spindle tools by WOHLHAUPTER and milling tools + collets - High-speed spindle with pneumatic drive - Milling slide with collet holder - External cylindrical grinding attachment - Live centre - Fixed steady rest - Central oil lubrication VOGEL - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tool operation - Operating manual - Machine mounted on a steel plate (steel plate 1200 x 540 x 20 mm) Space requirements L x W x H: 1650 x 950 x 1750 mm Weight of lathe: 660 kg (with steel plate) Weight of accessories: 325 kg In very good condition

Tahun pembuatan: 1970, Kondisi: bekas, Lead/screw-cutting lathe Reiden R200 Centre height: 200 mm Centre distance: 1000 mm 380 V Spindle speed: 16 - 1580 rpm Lsdpfx Aehtaaueglshb

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Type 4 Technical Data: Centre distance approx.: 400 mm Ledpfx Aoxyqm Soglshb Centre height over bed: 120 mm 24 spindle speeds: 71 – 2240 rpm Drive power: 0.6 / 0.8 kW Stepless longitudinal feed: approx. 6 – 450 mm/min

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2025-09/2404095, diameter putar di atas sled silang: 224 mm, lubang spindel: 51 mm, tinggi pusat: 180 mm, diameter quill: 32 mm, jarak gerak quill: 100 mm, panjang total: 1.680 mm, tinggi total: 1.400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing over bed: 360 mm Swing over cross slide: 224 mm Swing without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. tool shank cross-section: 16x16 mm Chuck mounting: D1 - 4 Spindle mount (lathe spindle): MK 6 mm Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of spindle speeds: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitches: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Tailstock taper: MK 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Power supply: 400/50 V/Hz Overall length: 1680 mm Overall height: 1400 mm Weight: 520 kg Standard equipment: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw face plate chuck Ø 200 mm Ljdpfx Asxykafoglehb - Face plate Ø 320 mm - 2 fixed centre points - Live centre MK 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial indicator and change gear set - Halogen machine lamp - Emergency stop button / no-volt release - Chuck guard with safety switch - Base frame / chip tray / splash guard - Tool kit / operating instructions / CE marking

Kondisi: bekas, Mesin bubut dengan poros utama/pemimpin US 400 (kemungkinan tiruan Weiler) Panjang pembubutan: 1000 mm Tinggi pusat: 200 mm Multifix B Kecepatan putar spindle: 31 – 2000 rpm Chuck 3-jaw (⌀ 200 mm) Lubang spindle: 45 mm Motor dengan rem Ljdpfjvzkptsx Aglohb Tombol darurat stop Pelindung chuck

Kondisi: bekas, Tahun pembuatan: 1987, Lead and Feed Screw Lathe Brand: Boehringer Model: DUE 560 Year of manufacture: 1987 used Technical specifications: Max. turning diameter: 250 mm Turning length approx.: 1200 mm Swing over bed: 560 mm Swing over cross slide: 365 mm Max. workpiece between centers: 500-800 kg Spindle diameter at front bearing: 100 mm Spindle bore: 62 mm Spindle nose: DIN 55022 No. 8 Travel distances: Cross slide travel: 345 mm Top slide travel: 125 mm Tailstock/quill diameter: 80 mm Tailstock taper: MK 5 Quill stroke: 190 mm Longitudinal feed: 60 x 0.0315-28 mm/rev Ljdetud S Ujpfx Aglshb Cross feed: 60 x 0.016-14 mm/rev Thread pitch range: 0.125-112 mm Total power requirement: 20 kW Space requirement approx.: 3.5 x 2.0 x 2.2 m Weight: approx. 2.5 t

Kondisi: baru, Centre distance ----- 750 mm Centre height ----- 125 mm Swing diameter ----- 250 mm Spindle bore ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Motor power ----- 1.1 kW Lhjdpjq E I Avofx Agleb INCLUDES * Delta frequency inverter * Automatic longitudinal and cross feed * Thread cutting dial * 3-jaw chuck 125 mm * 4-jaw chuck 125 mm * Faceplate * Fixed steady rest * Travelling steady rest * Back plate * Rear splash guard * Box with various tools Option * Stand/cabinet base

Tahun pembuatan: 1977, Kondisi: bekas, Weiler Matador lathe, year of manufacture approx. 1977, three-jaw chuck, Multifix. The machine is in operational condition and can be demonstrated under power by arrangement. Ljdponkad Ssfx Aglshb