Lini pengepres PET lengkap 2040 dengan conveyor belt, pelat PET, dan sistem PSS

BOA PET Recyclinganlage

Kondisi: bekas, IDC000100 Komplettes Sägewerk - Valon Kone VK26M mit Ein- und Auslauf-Förderbändern - Rundumförderanlage - ARIVislanda KS12, 2 x 37 kW Gsdpfx Aevgdy Aodtebg - ARI Schwartenabtrennsäge - ARI KL10 Trennsäge - Soderhamn Eriksson 519C, Besäumkreissäge mit Hackerköpfen - Bruks Hacker 1300 Vollständig mit Steuerungssystem und Mechanisierung.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Gbodpfx Adsvwlqqstsg Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 14.900 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 33.000 kg, daya: 264 kW (358,94 hp), kecepatan rotasi (min.): 70 rpm, tegangan masuk: 400 V, Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without heavy contaminants. Gbjdov S Hyvepfx Adtog Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, either loose or pressed in bales. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: as per customer request, mm Control cabinet: complete with (ABB frequency converter) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m³ Rotor length: 2200 mm Rotor diameter: 745 mm Rotor speed: 87 rpm (at 50 Hz) Number of rotor blades: 84 pieces Blade dimensions: 172 x 57 x 28 mm Counter blades (lower): 6 pieces Scraper comb (upper): 6 pieces Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions (LxWxH): 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge conveyors available as options.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Complete plywood panel production line including: Godpfx Asul Uizedtsbg - 1 BUERKLE lay-up line, year 1991, with BUERKLE roller gluer (length 3400 mm) + 1 OLM longitudinal conveyor + 1 OLM cross-feed conveyor + 1 assembly table. - 1 press loading rack with 10 positions. - 1 BVH 10-level hot press with oil-heated platens: • Platen size: 3700 x 1900 mm • Platen thickness: 40 mm • Daylight opening between platens: 75 mm • 1 central cylinder, diameter 700 mm, max. hydraulic pressure 315 kg/cm² - 1 press unloading rack with side discharge pushers on an elevating table. Line currently in operation, available second half of 2025.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 302827, de-Federhenn Stabprofil-Bearbeitungszentrum (Bohren und Fräsen) SBZ 100G - ZUM VERKAUF IN KOMPLETTLINIE MIT 1 SCHIRMER NC-SÄGE 1000-G4 BAUJAHR 2014 (GESAMTLINIE), SIEHE SCHIRMER-ANZEIGE...!! NC-Zuführeinheit mit Greifer, max. 200 m/min – maximale Profilänge 3500 mm. Der Greifer ist pneumatisch in 2 Achsen verstellbar zur Anpassung an unterschiedliche Profilgeometrien. Bearbeitungsstation als G-Modul mit 2 Servoantrieben in Y- und Z-Richtung ausgeführt. Vorbereitet für die Aufnahme von bis zu 14 Bearbeitungseinheiten für die Komplettbearbeitung von PVC-, Rahmen-, Pfosten- und Flügelprofilen. Ausförderer mit Tisch 2500x1500 mm. PC-Steuerung C 6140, Display, Software SBZ 100G, PLC+NC. Modem für Ferndiagnose. Belademagazin mit 9 Plätzen (9 Profile à 3500 mm), ausgelegt für Rahmenprofile mit max. 127 mm Breite. Barcode-Scanner – horizontaler Gurtförderer mit 9 stufenlos verstellbaren Transportbalken. 18 m/min – 3000 x 2400 mm – Aggregate: Schraubaggregat, 2 x Bohraggregat für Dübel- oder Pfostenlöcher, 2 x Bohraggregat für Befestigungsbohrungen 16.750 U/min, 2 x Zusatzbearbeitung (Kennzeichnung des Schließteils), Bohraggregat für Haustürbeschlag (innen öffnend), Bohraggregat für Olivenlochbohrung (3 Sp), Fräsaggregat Schlosskasten. 2 Stk. Fräsaggregate für das Fräsen und Bohren von Wasserablauf- und Lüftungsschlitzen. 1 Stück davon schräg angeordnet. 1 Schwenkaggregat (MD- und AD-Fenstersysteme). Fräsaggregat für das Fräsen von PZ- und Grifflochmuster. Gedjwnpa Nopfx Adtsbg

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 Gededt Rgvepfx Adtjbg VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 VZ0200F) Sword brush “WANDRES” VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Kondisi: bekas, Tahun pembuatan: 2003, Technical details: Pressing force: 40 t Hopper opening: 1200 x 730 mm Material: Cardboard, plastic – e.g., PET bottles Voltage: 400 V / 50 Hz Total power requirement: 16.4 kW Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling applications – Incl. feed unit/conveyor belt, LxW: 4500 x 1000 mm, motor-driven – Equipped with automatic 3-fold tying unit – Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm with 1.2 m³ volume Bale size (LxWxH): 300–1500 x 800 x 800 mm Bale weight: 250–450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; Filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; Fill height: 2500 mm Gedpfsu Nw Ezox Adtobg

Kondisi: baik (bekas), UV curing oven for production line Gbsdpfx Aet Ag Uqedtog

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, The WT-50 oil press developed by Peletto is designed for the production of oil using the cold-press method. The machine offers a capacity of approximately 6 liters per hour. Suitable raw materials include flaxseed, sesame, black cumin, sunflower seeds, soybeans, and many other oilseeds. European product, warranty, spare parts available. Net purchase price with VAT ID number. Gbedpfx Adswhw Nljtsg Pickup or delivery by arrangement. It is possible to inspect and test the machine before purchase. I look forward to your inquiries.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Lectra VIRGA.FA.CUT.MOTIF-E fabric cutting machine, year 11/2021, working width 170 cm. Single-ply cutting, specifically designed for stripes, checks, and panel cutting. 86 operating hours. The machine is connected and available for testing upon request. Gedpfx Ajvva Uuedtobg