Bollegraaf HBC100k (75kW) + KONVEYOR

Bollegraaf HBC100 (75kW) + crosswires

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 114 kW (155,00 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, warna: oranye, berat operasi: 25 kg, kondisi ban: 50 persen, konfigurasi gandar: 2 gandar, jumlah tempat duduk: 1, Tahun pembuatan: 2015, jam operasional: 8.454 h, nomor mesin/kendaraan: 250M301296, Perlengkapan: Pemeriksaan keselamatan UVV, derek, hidrolik, kabin, kopling trailer, lampu depan tambahan, pendingin udara, 6,20 + 4,80 m termasuk Generator Grapple sortir Polyp grab Magnet angkat semua dengan quick coupler juga tersedia: Atlas 230MH | 2011 | 6,80 + 5,00 | Polyp grab Liebherr A904C | 2011 | 6,60 + 5,00 | Polyp grab Ndodstucngjpfx Aahsf

Kondisi: baru, Klanke Supercut roll splitter for efficient shredding of waste rolls. Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical specifications: Blade length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 t Made to order Price and further information upon request. We would be pleased to provide you with a non-binding offer. Nedpjn I Rgpjfx Aahjdf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH Njdpfx Aasvgrh Uehodf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 2.632 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 29.381, gaya penekanan: 35 t, lebar bukaan pengisian: 620 mm, panjang bukaan pengisian: 1.000 mm, lebar total: 2.380 mm, tinggi total: 2.500 mm, panjang total: 6.625 mm, Termasuk sabuk pengumpan. Mesin siap digunakan segera. Njdovaw T Ajpfx Aahsdf

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Nsdovf E Avepfx Aahsdf Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W230-028, gaya penekanan: 80 t, masa garansi: 24 bulan, tekanan: 250 batang, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The machine in question is an HBC80 baler (45kW) with vertical tying. This baler has been completely refurbished in our dedicated refurbishment workshop. The refurbishment has been performed in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. Following refurbishment, this baler is sold with a 2-year warranty included. The press is supplied with the following options: * support frames, * intermediate hopper, * bale exit chute, Nedotvat Tepfx Aahsdf * wire spool platforms.

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Overband plate magnet Design: stainless steel 1.4301, fully welded Ndjdpfx Aed Evl Aeahof including drawer for cleaning 600 x 500 x 180 mm fully welded housing lifting eyes for suspension

Tahun pembuatan: 2022, Kondisi: baru, nomor mesin/kendaraan: 2022022209, Aluminum angle conveyor with substructure Conveyor length: 1500 mm horizontal + 4000 mm inclined Angle at bend: 45° Discharge height: approx. 3000 mm Height of horizontal section: 200 mm (top edge) PVC conveyor belt Conveyor belt type: EM 15/2 0+17 PVC, green Belt width: 400 mm T30 cleats welded on, pitch 300 mm * Antistatic due to threads in the running side fabric Endless finger splice, stepped joint Ndjdpfx Ash Elhzsahjf 40 mm wave edge welded on both sides (high-frequency) * Clearance zone on both sides for belt tracking on the incline Cross arrangement: -70+35-5+180-5+35+70 Full coverage support plate Drive: Motor approx. 0.25 kW Belt speed approx. 0.4 m/sec * Optionally controllable with frequency inverter Connection: 220/400V, 50Hz, protection class IP54 Including construction for suspension of the overband magnetic separator in the horizontal section.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 38 t, daya: 5,5 kW (7,48 hp), Neu auf Lager Avermann MPC 20 PEL Optional mit Behälterlift Ndsdewhfu Aspfx Aahof

Kondisi: siap digunakan (bekas), Spesifikasi teknis mesin press Dixi 60 AUTOMAT Njdpfx Aajv Amw Nehodf Bukaan pemuatan (L x T): 1550 x 1000 mm Daya penggerak: 31,5 kW Gaya tekan: 60 t Berat bal (tergantung material): 350–600 kg Dimensi bal (L x T x D, dapat disesuaikan): 1100 x 800 x 300–1600 mm Waktu press/siklus: 13/24 dtk Berat mesin: 7000 kg