Membeli mesin bekas (269)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Axle 920 mm X-axis 3000 mm Crodpfx Aofmdcqoavei Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: X = 300 mm Y = 120 mm Z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X-direction Maximum groove depth with saw blade: 10 mm Motor: 0.75 HP, 400 Volt Required extraction capacity: 2300 m³/h Location: arriving in stock 54634 Bitburg - immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, 1 Crjdpfxoy Ehnye Aavei

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Rover Multi Up M C S CNC Machining Centers Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage*: Y = 1900 mm Axis Travel Paths*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Segmentation of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. The support movement is guided by linear guides with recirculating ball carriages. Clamping is performed on the front and rear linear guide using pneumatic cylinders. Clamping is released via a push button located on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping The vacuum modules can be rotated by 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA Set-Up Assistant Table for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position display. — Sensors on each work table and along the X-axis of the working area. — Indication of the direction and position reached during positioning phase, mounted on each work table The system, according to work table programming, suggests to the operator the moving direction for each work table and carriage, indicating with a green LED and audible signal when the position is reached within a tolerance of ± 1.5 mm. Segmentation of pneumatic system into 2 working zones in X Machining unit with 5 interpolating axes, 13 kW (17.4 HP), with HSK F63 adapter, liquid cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting of aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions on the machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. HSK F63 tool holder, equipped with an extended integrated flange, suitable for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech Tool Kit Complete set of tools for acceptance test Comprising the following 9 parts Replacement of the standard PC with a high-performance PC. Digital devices for measuring tool length for diameters up to 130 mm. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1 license WorkCenter suction cup recommendation 5-axis simultaneous Material removal simulation 12-month warranty period Cjdpsy Ehrxefx Aavsri Location: ex stock 54634 Bitburg – Immediately available –

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Ulmia table saw Model 1710 S Serial No. 2943 Year of manufacture: 1982 With sliding table Tilting saw blade Maximum saw blade diameter: 250 mm Maximum cutting height: 75 mm at 90° Maximum cutting height: 52 mm at 45° Motor power: 2.2 kW Sliding table Sliding table travel: 750 mm Height to top of table: 850 mm Extraction port diameter: 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available - Crodjr Elmwspfx Aavsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Kity tilting spindle moulder 629 Motor: 2.2 kW / 400 Volt Table size approx. 580 x 715 mm Finely adjustable milling fence Spindle tilting +30° to -5° Crsdpfx Ajr Id S Esavei Spindle can run clockwise and counterclockwise Speeds: 4800 / 6400 / 8700 rpm Spindle stroke: 130 mm Tool diameter up to 180 mm Extraction connection: 2 x 100 mm Location: in stock, 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Cedsu I R Utepfx Aaveri Working width: 1,400 mm Max. material thickness: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers, suitable for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives for various types of materials such as MDF, multiplex, particle board, composites, and gypsum plasterboard. This type of gluing machine enables precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be appropriate for the type of production. The heavy-duty frame and core of the rollers, manufactured with greater wall thickness compared to earlier models, allow for high production throughput without any particular problems and enable bonding of materials up to 2,200 mm in width. Roller removal for maintenance is a simple process, as the supports can be separated into two halves using a simple bayonet coupling. The gluing machine can also be equipped with various optional features such as an electronic speed controller, automatic roller washing system, and automatic upper roller lift with position indicator on the display. The S4R/P glue machine is used for a variety of manufacturing applications, including in the construction sector and for the production of foam panels and mattresses. Equipment: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm. Disc rollers D: 122 mm, stainless steel Location: ex stock 54634 Bitburg - immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Daya motor: 7,5 HP (5,5 kW) Tegangan motor: 400 V (50Hz) Lebar penyerutan: 410 mm Poros penyerut: Poros sistem Felder 4-pisau Jumlah pisau penyerut: 4 Panjang meja penyerut: 2.200 mm Pagar penyerut: 1.300 x 170 mm Kedalaman pemotongan: 5 mm Crsdpfeh Hp Hysx Aavsi Koneksi ekstraksi: 120 mm Berat: 510 kg Pelindung penyerutan Standar EURO Perlengkapan standar: • Poros penyerut dengan lebar 410 mm • Meja penyerut pengumpan panjang 1080 mm • Pagar penyerut dengan penggaris 1300 x 170 mm • Pelindung penyerutan Standar EURO • Poros sistem Felder 4-pisau Lokasi: Dari stok 54634 Bitburg - tersedia segera -

Kondisi: baru, Tahun pembuatan: 2026, Mesin Press Rangka Orma FUTURA ECO 30/20 Dimensi area kerja 3000 x 2000 mm 2 silinder vertikal, diameter 65/40, langkah 1100 mm Crodps Afavkofx Aavei Total tekanan 7,5 ton 2 silinder horizontal, diameter 50/30 mm, langkah 1200 mm Total tekanan 2 ton Pengendalian melalui tombol tekan Motor 2,1 kW DAFTAR HARGA 2026 € 31.200,00 Lokasi: di pabrik - tersedia segera - Hak untuk penjualan antara waktu dapat berlaku

Kondisi: baru, Tahun pembuatan: 2026, Mesin Press Vakum Membran VPR-4000 adalah mesin serbaguna untuk pengolahan kayu dan pembentukan termal. Mesin VPR-4000 juga dapat diputar dan dipindahkan. Aplikasi: Pelapisan veneer / Perekat pembentukan / Pelapisan... Pelapisan berbagai profil (veneer, kertas, plastik...) Pembengkokan kayu: Pembuatan komponen yang dibengkokkan dan dilapis. Sistem vakum: Permukaan kerja dengan saluran vakum untuk tekanan negatif yang seragam, bahkan pada benda kerja yang besar. Pompa vakum Becker / Bebas oli / Kapasitas tangki 100 l Permukaan kerja: 4000x1500mm Daya pompa: 0,75 kW Kapasitas pemompaan pompa vakum: 40 m3/jam Membran karet Dimensi luar: 4100 x 1650 x 1000 mm Berat: 400 kg Crodpfoyr R Hwex Aavji Lokasi: Tersedia di gudang 54634 Bitburg - dapat dimuat secara gratis -

Kondisi: baru, Tahun pembuatan: 2025, formatkreissaege-altendorf-f-35-typ-3-1000 Crsdpfxjxyl Ecj Aavei

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The rugged Junior R1 offers all the features required of a modern edge sanding machine. A solid cast iron sanding unit equipped with a powerful motor ensures maximum sanding performance. The height-adjustable worktable, adjusted by spring pressure, allows for optimal use of the sanding belt and ensures safe operation. Optional upgrades include belt oscillation, stepless tilting of the sanding unit, a veneer sanding device, and an auxiliary table for sanding operations on the idler roller. The machine is delivered with an assortment of sanding belts; also included in the scope of delivery are an angle and mitre guide. Technical Data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec. • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Extraction diameter: 100 mm Crjdpfx Aaod R Ev Dovsi Location: Available from stock, 54634 Bitburg – free loaded – Shipping possible for a fee.

Kondisi: baik (bekas), Tahun pembuatan: 2005, Marking and spotting plate 1000 x 1000 with base frame Location: ex stock 54634 Bitburg Codpfx Ajwqx Axsavjri - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Motorized thicknessing table adjustment with two speeds Digital display for working height Thicknessing table made of cast iron The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Standard with noise and chip protection curtains at workpiece infeed and outfeed Adjustable roller pressure Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSAModels with Tersa cutterhead Cutter change in seconds When the machine is started, the centrifugal force automatically tensions the planer knives—self-locking Blade projection is set automatically without the use of setting gauges Csdpfx Aoy Eg Apeaveri Working Table The working table is mounted on four large trapezoidal thread spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting mechanism, the table position is reliably maintained even without locking Helically grooved steel infeed rollers for continuous and uniform feeding Second, rubber-coated feed roller at the outfeed Heavy-duty anti-kickback devices prevent kickback of workpieces A 4-knife cutterhead ensures optimum planing results Dimensions and Weights Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter (planer) 150 mm Drive Performance Main motor 9 kW Setup Information Required space – length: 1305 mm Required space – width/depth: 1080 mm Required space – height: 1197 mm Explanation of required space: The dimensions account for maximum traverse paths or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Explanation of working area: Add the indicated dimensions to the required space to determine the recommended free installation area for the machine. Thicknessing Thicknessing table length: 630 mm Thicknessing table width: 1000 mm Working height min.: 3.5 mm Working height max.: 300 mm Working length min.: 210 mm Max. cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: In stock, 54634 Bitburg - Immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Codpfx Aaedqzcxjvjri

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated Credpfxsiidm Ns Aavei - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Crjdpfsw Hl Aqex Aavei Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard can be connected to dust extraction Machine mounted on a mobile base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range Horizontal 45°- 90°- 25° Mitre range Vertical 60°- 90°- 30° Saw blade diameter 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - We are also happy to offer you the appropriate saw blade upon request.

Kondisi: baru, Tahun pembuatan: 2026, Martin panel saw T 77 - new stock machine - Top equipment - Double-sided tilting - Equipment: T 7710/2-a Saw unit Prex - double-sided tilting T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Rip fence table length 3.3 m T 7735/3-a Cutting width 1350 mm Crjdpfew D T Dkex Aavei T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer lighting Safe Light T777572-a Angle cutting system RadioCompens with continuous fence T 7780/1-a Rear table extension 610 x 860 mm T7792/2-a Sensor monitoring for laterally adjustable safety hood 2 x 45 degrees T7704/2-a ConnectPad 12.9" / 13" T7704/20-a OtterBox Defender Case T7706/1-a ConnectApp at Classic control level Location: ex stock 54634 Bitburg - immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Elektra Beckum used wood bandsaw BAS 315/5 WN55 Year of manufacture: 1987 Serial no.: 2106584 Codevkyd Sspfx Aavori Blade length: 2240 mm Voltage: 230 Volt Cutting depth: 170 mm Rip fence Base frame Location: in stock at 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2024, EVOLUTION – Precision, Ergonomics and Functionality Perfectly Combined Automatic functions, such as automatic locking and swiveling, or the automatic infeed and outfeed of the saw unit, make your daily work significantly easier. Take advantage of the benefits of the EVOLUTION series. All functions are conveniently controlled via a 12" touchscreen PC. The intuitive user interface ensures perfect execution of your jobs down to the finest detail. Comprehensive Standard Equipment - 12" touchscreen PC with optimized operator guidance - Laser-assisted display of the horizontal cut - Digital measuring system DMS-XY - Automatic saw beam locking with cut position recognition Credpfx Aaohf Dqbsvei - Automatic locking and swiveling of the saw unit - Automatic infeed and outfeed of the saw unit - Automatic fine adjustment of the saw unit - Operating hours counter - Tool database - Full-length ALU center support - Integrated, high-performance TRK dust extraction. Dust limit approx. 1mg/m³ - Control cabinet mounted directly on the saw frame - Supersilent sound insulation Scoring Unit: VSA scoring saw, continuously adjustable Free-standing support, complete Paper holder High-end grid made of synthetic materials Aluminum small parts support, complete UPS 24 VDC for touch PC, uninterrupted power supply Saw Weight: approx. 1,100 kg Cutting Depth: 80 mm Saw Motor Power: 5.5 kW (7.5 HP) Saw Blade Diameter: 300 mm Saw Blade Bore: 30 mm A-weighted emission sound pressure level at workplace LpA: 83 dB *3 Saw Blade Speed: 4800 rpm 1 Extraction Port: ø 140 mm Compressed Air Connection: 6-10 bar Connected Load: 7.5 kW Power Supply: 3 x 400 V / 50 Hz Dimensions (mm): Type L H T1 free T2 wall 6224 6645 3018 1741 1361 Cutting Range (mm): Type LS HS (vert) HS horizontal 6224 5300 2240 2100 Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Martin sliding table saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Crsdpjv Erkaefx Aavei Sliding table length: 3.0 m Cutting width: 1,350 mm Rip fence adjustable via handwheel Standard cross-cut table with length stop for angled cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1,350 mm T 6641-a Rip fence adjustable via handwheel T6660/1-a Standard cross-cut table for angled cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex stock 54634 Bitburg - Immediately available - Some images may show options that are not included in the offer.

Tahun pembuatan: 2005, Kondisi: baik (bekas), Gerobak sayap dengan 2 x 6 anak tangga Gerobak bertingkat Kereta pengambilan pesanan Codpfoxacubjx Aaveri Dapat dipindahkan Panjang: 1,1 m Anak tangga: 0,55 m Tinggi: 2 m Lokasi: dari stok 54634 Bitburg - tersedia segera -

Kondisi: baru, Tahun pembuatan: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly create perfect foundations. It was precisely with this goal in mind that the T54 was developed. The machine enables you to surface workpieces easily to state-of-the-art standards and reliably apply angular edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut action is available as an optional extra. Chamfer planing is effortless – thanks to the user-friendly single-handed adjustment, any angle between 90° and 45° can be set quickly. The robust cast iron tables of the T54 provide secure support even for large and heavy workpieces. If you require more support, you can extend both infeed and outfeed tables by 380 mm each, also in cast iron of course. Technical Data Table width: 500 mm Table length: 2840 mm Max. depth of cut: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Credpfx Ajpgkmwsavji Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock with 4 knives Location: Available ex-stock, 54634 Bitburg - Immediately available -

Tahun pembuatan: 2013, Kondisi: sangat baik (bekas), Robust and compact bridge saw with fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Specially designed carrier for maximum cutting precision; Water collection tray with integrated water circulation system for blade cooling; Sturdy and compact construction. Roller track at the front Roller track at the rear Blade size: 350 mm Motor power: 2 kW Voltage: 230 Volts Weight: 173 kg Mobile Location: Ex-stock 54634 Bitburg Crsdpfx Aaji Akvvovoi - available immediately -

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Johannsen Mesin Amplas Pita Panjang T 82 - K Pneuma - Pad pengamplasan didukung udara Cjdpfx Aaoxpmtyjvori - Panjang benda kerja maks.: 2800 mm - Lebar meja: 950 mm - Motor utama: 5,5 kW - Motor kipas: 2,2 kW - Lebar sabuk amplas: 160 mm - Diameter konektor ekstraksi: 180 mm - Putaran kanan/kiri - Penyesuaian roda tangan - Dimensi keseluruhan (P/L/T): 4080x1800x1400 mm - Berat sekitar 1000 kg Lokasi: di lokasi Saarland - tersedia segera -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Fully equipped in standard version with: - Fully automatic electronic control system with program selector switch: RINSING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length monitoring with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with viscosity between 150 and 350 mPas - Stepless electronic glue quantity adjustment with potentiometer by time-preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the glue system, with EasyClean function button (automatic cleaning program for the glue hose and glue nozzle via spray funnel and wastewater collecting tank) Csdpfx Aaedwi Rkevori - Control lamp for glue level indicator in the glue container - 1 stainless steel container for 5 kg of glue, as well as 1 stainless steel container for 5 l of water for flushing/cleaning - 4 wheels for moving the machine Including 1 gun for dowels Ø 8 mm, dowel length 25–40 mm Driving projection 7–20 mm Air connection: 6 bar Price ex stock 54634 Bitburg - available immediately -