Membeli mesin bekas (265)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions and Weights Length approx.: 2,000 mm Width/Depth approx.: 1,110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1,034 mm Maximum Planing Depth: 5 mm Dust Extraction Connection Extraction Port Diameter, Thicknessing: 2 x 120 mm Thicknessing Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Planing Depth: 5 mm Electrical Data Main Motor Power: 5 kW Supply Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5,200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures exceptionally quiet operation. Helically serrated steel infeed rollers for consistent and even material feed. Material feed with two selectable speeds. Digital height display for thicknessing table. 2,000 mm long jointing tables for easy processing of large workpieces. Work tables made of cast iron, annealed and stress-relieved, making them resistant and permanently flat. Stable, large aluminium jointer fence with round bar guide (1,200 x 160 mm). Height adjustment for thicknessing table via handwheel with digital height display. The high machine weight guarantees maximum precision and smooth operation. Powerful industrial motor. Robust steel and cast iron construction. Equipment Details Jointer Fence - Stable, large aluminium jointer fence (1,200 x 160 mm) - With precise round bar guide Dust Extraction Hose Connection - Extraction ports for jointer and thicknesser face the same direction during both operations. - The extraction hose can thus be connected from the same side for both planing modes. No need for a hose going around the machine. Planer Head - Helically serrated steel infeed rollers for consistent, even material feed - Heavy-duty anti-kickback devices prevent kickback of large workpieces - 4-knife cutterblock for optimal planing results Chain Drive - Rugged chain drive concept - Drive wheels made of steel - Massive cast iron bearing block Two Feed Speeds - Standard with two feed speeds - Conveniently selectable from the operator’s side Material Feed - Helically serrated steel infeed rollers for consistent, even feed without indentations - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Hedpehkz E Tjfx Ag Rsfd Thicknessing Table Adjustment - Adjustment via handwheel - Digital height display accurate to 0.1 mm Tersa Cutterhead - No adjustment or screwing required - Knife changes within seconds - Self-locking - Exceptionally quiet - Perfect planing results Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2025, Stable cast iron and steel construction Large, heavy-duty milling unit made of cast iron, tiltable up to -45° to the rear Milling speeds displayed via LEDs Quick and effortless speed change using eccentric clamping Reversible rotation (clockwise/counterclockwise) Height and tilt display with 0.1 mm accuracy Heavy-duty professional milling fence: featuring rack-and-pinion fine adjustment, numeric display, aluminum fence jaws, can be positioned in three ways for rapid repetition of settings Hfedpfx Asiidnfjg Rod TECHNICAL DATA Extraction Connection Extraction port diameter 2 x 120mm Work Table Table length 2500mm Table width 655mm Electrical Data Supply voltage 400V Mains frequency 50Hz Motor power output 5.0kW Milling Spindle Spindle tilt 0 to -45° Usable spindle length 125mm Spindle speeds 3500/6000/8000/10000 rpm Spindle shaft diameter 30mm Max. Cutter Diameter Max. tool diameter 240mm Max. retractable tool diameter 230mm Max. profile milling tool diameter 210 – 240mm Max. tenoning cutter diameter 320mm SCOPE OF DELIVERY Aluminum milling fence jaws Curved milling guard hood Motorized height- and tilt-adjustable milling spindle Digital display of set values Speed indication via LED display on the machine front Table extension left and right Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, en:Tischfräse minimax twf 55 es M 3 UP Professional joinery machine with motorized height and tilt adjustment of the milling spindle, four speeds, and electronic control system Article Number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Hfedpfx Agjhp Rc Is Rjd Aluminum sliding table ✔ Handle on sliding table ✔ Milling fence FLEX ONE: Heavy-duty professional design, automatic adjustment of the entire milling fence according to tool diameter, manual chip removal adjustment, fence swiveling device, aluminum fence jaws with connecting rails Spindle height adjustment motorized Telescopic mitre fence with two flip stops Spindle tilt adjustment motorized Supporting table ✔ Control system Ready 3: Programmed movement of the milling unit in two axes, automatic adjustment of the entire milling fence based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Positioning of control elements Operator panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and Weights Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Suction port diameter 2 x 120 mm Work Table Table length 1200 mm Sliding table length 1200 mm Table width 530 mm Sliding table width 360 mm Table height 900 mm Sliding table height 142 mm Setup Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Explanation of space requirement: The dimensions include maximum traversing paths or usable lengths. Working area width/depth 2300 mm Machine body length 1200 mm Explanation of working area: Add the listed dimensions to the space requirement to determine the recommended free floor area for the machine. Electrical Data Supply voltage 400 V Drive motor power 5.0 kW Mains frequency 50 Hz Milling Spindle Spindle tilt 0 to -45° Milling spindle speed display Control system display Usable spindle length 125 mm Spindle shaft diameter 30 mm Spindle speeds 3500/6000/8000/10000 rpm Milling Tool Diameter (Max.) Maximum tool diameter 240 mm Maximum profiling cutter diameter 240 mm Maximum retractable tool diameter 230 mm

Kondisi: baru, Tahun pembuatan: 2024, Martin Dicken Planer T 45 with Tersa Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers smoothly planed surfaces, is fast and simple to operate, and runs extremely quietly. The standard electronic control makes setting the planing height effortless thanks to 99 storable planing dimensions, ensuring the very first workpiece fits perfectly. Of course, the thickness table is electrically adjustable at the push of a button, and can be fine adjusted in steps of 0.1 mm upwards. The feed speed controls are easy to reach and operate ergonomically. The heavy, vibration-damping composite frame combined with the high-quality planing head bearings guarantee outstanding surface results. Thanks to its soundproofed design, even the standard model operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg Hodpfx Aeqlckpsg Rjfd • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Rotation speed: 5,000 rpm • Operation: Single-axis control for planing dimension, up to 99 values storable, 49 of which usable for a freely programmable planing sequence; pushbuttons for manual rapid and fine thickness adjustment with digital display, pushbutton for cutterhead start/stop, integrated hour meter • Cutterhead: TERSA solid steel cutterhead Z4, Ø 125 mm; including lock for easy knife change • Thickness table: Electrically adjustable with fine adjustment, table movement speed 10 mm/s, securely mounted on 4 supporting spindles, superbly planed table surface • Feed system: 2 speeds, 6 / 12 m/min, selectable electrically even during planing; large 85 mm diameter rubber feed rollers for compensating varying wood thicknesses, gentle on materials and self-cleaning, easy roller exchange; segmented infeed pressure bar • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable left or right (optionally both sides in special cases); minimum extraction volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication bar for oil-lubricated points; bearing/cutterhead lubrication via nipples • Accessories: 1 grease gun pre-filled with long-term grease 1 oil can 1 open-end wrench 1 tool for knife changes 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emissions: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] No-load (without extraction) P1 65 No-load (with extraction) P1 77 Operation (without extraction) P2 65 Operation (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] No-load (without extraction) 84 Operation (with extraction) 90 Dust emission: low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Kaeser Screw Compressor SM 13 - 11 bar Showroom Model at Special Price Free air delivery at 11.0 bar (g): 1.07 m³/min Total system power consumption at 11.0 bar (g): 9.63 kW Specific power: 9.00 kW/(m³/min) Maximum overpressure: 11.0 bar Motor full-load efficiency: 91.7% Motor efficiency class: IE4 Motor rated power: 7.5 kW Motor speed: 2955 rpm Motor protection rating: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient (at +20°C, 30% rel. humidity): 8 K Sound pressure level: 65 dB(A) Compressed air connection: G 3/4 Hedpfjvk R A Sex Ag Rsfd Location: Available from stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Mandrel-free tube bending machine RB 54 – NC-controlled, with large program memory Item number: 4300054 NC controller for setting the bending angle Up to 50 programs can be stored Hsdpfjvk Scgex Ag Rofd High-quality, robust construction Quick tool change Fully motorized drive Automatic return to home position TECHNICAL DATA General Information Max. bending radius: 162 mm Max. bending angle: 210° Bending speed: 2 rpm Torque: 2341 Nm Dimensions and Weights Length (approx.): 600 mm Width/Depth (approx.): 220 mm Height (approx.): 470 mm Net weight (approx.): 107 kg Bending Performance Bending capacity, tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity, tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity, tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm Electrical Data Drive motor output: 1.1 kW Connection voltage: 400 V Mains frequency: 50 Hz Location: ex stock - immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, SRF Master Illustration on the Left 2 m Extraction Arm Application Area - Low amounts of smoke/dust - Occasional use Benefits - Minimal repositioning of the extraction hood required - Greater flexibility thanks to additional hose connection at the rear Features - Safe operation due to filter monitoring - Extraction hood can be rotated and swivelled 360 degrees - Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation efficiency: >99% Filter material: Fiberglass fleece Welding fume filter class: W3 Additional filters: Two pre-filters Basic Data Extraction capacity: max. 950 m³/h Extraction arm diameter: Ø 150 mm Extraction arm length: 2 m Extraction connection diameter: Ø 150 mm Power supply: 230 V / 50Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Hjdpfxedqzbro Ag Rofd Weight: approx. 71 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, ST 3 classic F 23 - Combined Saw-Spindle Moulder Machine Features: - With tilting saw blade, tilting spindle moulder, and sliding table made of anodised aluminium - Robust steel and cast iron construction - Large support surface and precision-cast iron table - High-precision sliding table made of anodised aluminium (slide travel 2250 mm) - Large outfeed table (900 x 600 mm) with extendable aluminium telescopic fence - Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°-45° - Saw rip fence with fine adjustment - Stable saw unit and large double-trunnion spindle moulder assembly ensure maximum stability, precision, smooth running, and long service life - Solid and precise machine table made from stress-relieved cast iron - Three spindle speeds, manually adjustable from 3,500 - 10,000 rpm - Spindle with forward and reverse rotation - Standard spindle moulder guard - Two 5.0 kW motors with ample power reserves Cast iron spindle moulder unit: - Secured on both sides at the top - Precision ball bearings at the top - Close to the lever point - Four optimally graduated spindle speeds enable workpiece sharpening Powerful motors: - Industrial motors suitable for continuous operation (100% duty cycle at full load) Scope of delivery: - Spindle moulder guard - Anodised aluminium sliding table - Aluminium fence jaws - Flip stops Hfjdecnwydspfx Ag Rod Technical data: - Dimensions cast iron work table: 1112 x 430 mm - Crosscutting length: 2250 mm - Max. saw blade diameter with/without scoring: 315 mm - Max. cutting height at 90°/45°: 100/70 mm - Max. crosscut width: 2660 mm - Saw blade tilt: 90° - 45° - Cutting width: 900 mm - Speed: 4000 rpm - Spindle moulder: - - Spindle tilt: 90° - 45° - Useful spindle length: 100 mm - Max. tool diameter: 210 mm - Max. tenon tool diameter: 275 mm - Max. retractable tool diameter: 180 mm - Speeds: 3,500/7,000/10,000 rpm - General: - - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) - Weight: 470 kg - Extraction port diameter: 2 x 120 mm - Extraction port diameter (blade guard): 60 mm Location: In stock at 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2026, KRBS 101 Combined Tube, Profile, and Belt Grinding Machine Convenient operation thanks to an easily adjustable clamping device The rotatable jaws of the clamping device allow secure fixing of square tubes, round tubes, and flat steel Adjustable grinding angles from 30° to 90° and from 0° to 60° Optimized quick-change mount allows the contact roller to be replaced quickly and easily without tools Enhanced durability thanks to larger and improved roller bearings Practical contact roller holders integrated into the base Comprehensive range of contact rollers available as accessories for grinding various tube diameters Rapid switching between tube grinding and belt grinding possible Powerful motor Almost all settings can be made tool-free (operating tool included) Large, foldable protective screen with optimal visibility Two belt speeds for optimal adaptation to different materials (15 m/s ideal for stainless steel and aluminum, 30 m/s perfect for steel) Includes two easily removable chip collection containers Suction connection (Ø 100 mm) available for extraction systems Extraction systems available as accessories Further developed, vibration-reducing base Scope of delivery: 1 x standard grinding belt grit K 36 2 x chip collection containers 1 x wrench 1 x grinding roller 42 mm Hfsdecnz Ayopfx Ag Rjd Model: KRBS 101 Article No.: 3921001 Technical Data: Power connection: 400 V Frequency: 50 Hz Motor power: 2.5 / 3.3 kW Grinding diameter: 20 - 76 mm Grinding angle: 30° - 90° (0° - 60°) Grinding belt (length x width): 2000 x 100 mm Belt speed: 15/30 m/s Extraction port diameter: 2 x 100 mm Dimensions (L x W x H): 1250 x 750 x 1140 mm Weight: 159 kg Location: Ex works – available at short notice

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The compelling advantages: Space-saving compact design – comfortable and powerful. Excellent surface quality and a pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture window with air baffles – making it suitable for larger workpieces. Paint mist separation efficiency up to 99%, primary filter retention capacity up to 18 kg/m² – resulting in long filter service life! Easy and fast front filter replacement. Cost-effective replacement filters. Low initial investment and extremely low energy consumption. Dry spray wall made from galvanized sheet steel with welded base frame, cardboard labyrinth filter as primary filter, and fiberglass filter as secondary filter unit. Ex-fan including throttle flap mounted on the left. Do not compromise on surface quality. Easy Paint extraction walls are the ideal cost-effective solution for effective capture and filtration of paint mist as well as extraction of solvent fumes. Robust and powerful, yet economical in consumption. The IPE double filtration system provides two filter stages for maximum separation efficiency of up to 99%. The cardboard labyrinth filter, with its folded filter pockets, captures significantly more overspray (up to 18 kg/m² of filter area) than conventional filter mats. The downstream fiberglass secondary filter only retains very fine residual particles. As a guideline, the cardboard labyrinth filter, depending on the type of paint used, has a service life of approximately 150 to 200 painting hours. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, thus only after every 5th or 6th cardboard filter change. Easy Paint is also equipped with a lower intake opening to quickly and safely extract solvent fumes at floor level or from floor pits. Thanks to this additional downward-facing intake, the Easy Paint can be connected to a floor pit or floor tray for underfloor extraction. The front-mounted filter cassette also facilitates filter changes here. Standard extraction performance Easy Paint 3500 Item no. 600025 Hodscnz Iqopfx Ag Rsfd Air capacity as supplied* 3,500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW ex Exhaust pipe connection D = 300 mm Width in mm 2,750 Overall height in mm 1,455 Depth in mm with capture window 855 Weight in kg 145 Location: Ex Stock Bitburg Demonstration machine at special price

Kondisi: baru, Tahun pembuatan: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Hfodpfx Agocqvhwo Rsd Location: Ex stock 54634 Bitburg - immediately available -

Tahun pembuatan: 2025, Kondisi: baru, Swiveling Vacuum Lifter BARBARIC, incl. column-mounted slewing crane Equipment package consisting of: - Vacuum Lifter uniWood B3-90 Degree - 250 Comfort version, with integrated chain hoist reinforced, load capacity: 250 kg Suitable for vertical and horizontal transport of flat, standard commercial panels. Vacuum generation via pneumatic ejector. For lifting porous materials (MDF over 8 mm thickness), a reinforced vacuum pump is installed. -- Technical Data -- Hfodpfjc Umftjx Ag Rjd Lifting speed (chain hoist): 0–10 m/min infinitely variable via frequency converter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar, filtered compressed air required Dead weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum gauge. Load release via 2-button operation - Column-Mounted Slewing Crane BARBARIC Lifting capacity 250 kg at the lifting equipment Consists of: column, console, and lightweight jib arm. Delivery includes trolley and energy supply system. Total height: approx. 4.2 m Underside of the jib: approx. 3.5 m Outreach: 5 m Slewing range: approx. 250° Slewing and trolley movement by hand Base plate 700 x 700 mm with fastening material included. Supplied with chemical anchor for concrete floor. Prerequisite for this type of anchoring is a correspondingly reinforced concrete floor. The static verification of the floor must be provided and documented by the customer. Other designs and lengths available on request.

Kondisi: baru, Tahun pembuatan: 2025, Schneider Compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard equipment includes all safety fittings and an electric connection cable with plug, as well as a Condor pressure switch. The compressed air tank is equipped with a safety valve, tank pressure gauge, and condensate drain valve. The welded rear handle improves loading and transport capability. Hsdpfx Agjbyhvrj Rjfd Fully automatic operation via pressure switch with start-up relief, motor protection, and on/off switch. Upgraded specification for universal application. With V-belt drive, 2 inline cylinders for particularly smooth operation, and 400 V three-phase motor with external motor protection. Low compressor speed – resulting in reduced wear on compressor components, lower noise levels, and reduced vibration. Large fan flywheel for optimum cooling. Including filter regulator for regulated, condensate-, dirt-, and oil-free compressed air. 2 m device supply cable with rubber coating and quick coupling air outlet. Device supply cable with phase inverter. 10-year warranty against tank rust-through. Technical Data Pressure: 10 bar Intake capacity: 510 l/min Filling capacity: 390 l/min Speed: 1240 rpm Tank volume: 90 l Weight: 80 kg Noise level: 97 dB(A) Dimensions (W x D x H): 1070 x 495 x 895 mm Motor power: 3.0 kW Voltage: 400 V Location: Ex stock Bitburg Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2026, Variable adjustable paint rotary table • Numerous adjustment options for small and large solid workpieces • Sturdy construction • Can be operated by one person, rotatable with rigid outriggers and adjustable swivel arms • Height adjustable Technical data: Length: max. 1850 mm Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Top quality Can be shipped by UPS by us. Requires assembly upon delivery. Hjdpobzmagjfx Ag Rjfd Location: ex stock Bitburg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Showroom model – new Offered at a special price Technical data 300-P Inlet diameter: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow: 6,000 m³/h Nominal air flow: 5,089 m³/h Hsdpfxecdrzds Ag Rsfd Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Location: Ex-stock Bitburg Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade bore: 50 mm Blade speed: 2800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Hfjdpsk H Ic Uefx Ag Rod Saw can be swiveled on one side up to approx. 25° for acute angles and tilted to the left up to 30° TCT circular saw blade 520x4.0/2.8 x 50 mm, 60 ATB teeth, negative hook angle, for wood RLH-ST60 measuring length 6.0 m, mounting side: left Length stop / roller conveyor, heavy-duty version, Stop carriage adjustable from operator position via handwheel, electronic-digital measuring display, stop carriage pneumatically clamped, stop flap folds away to the rear, with steel rollers, 60 mm diameter, roller pitch 200 mm, 400 mm roller width, with 4 support legs and connector, total length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230-volt mains operation, with electric ON/OFF switch and socket. Powerful dark red LED display. Higher precision than the battery-powered crystal display RO-ST60 4.0 m long infeed roller conveyor Mounting side: right Heavy-duty version, steel rollers: 60 mm diameter, roller pitch: 200 mm 400 mm roller width, 3 support legs and connector Location: Ex stock 54634 Bitburg - Immediately available - Image: similar. Machine still in original packaging

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 Hjdji Am U Depfx Ag Refd The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Hodpfxolht Hzj Ag Refd

Kondisi: baru, Tahun pembuatan: 2025, Rojek Panel Saw PF 350 Industrial Version The machine design includes many technical innovations that enhance the practical utility of this machine. Its high-quality workmanship makes this panel saw one of the best in its class. The machine is equipped as standard with the CV 360T aluminium sliding table, featuring very precise and sturdy mounting on hardened bars. Optionally, the machine can be upgraded with the CV 400T aluminium sliding table, which is an extremely rigid multi-chamber construction, precise and robustly attached with steel bars. Aluminium sliding table dimensions: 400 x 3200mm. Precision and reliability are ensured by the solid pivot segment guide of the saw mechanism housed in the heavy cast iron body and the scorer unit with a separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7.5 kW/3×400 V Motor speed 2,870 rpm Max. saw blade diameter with scorer Ø 350 mm Spindle diameter 30 mm (1") Saw blade spindle speed 4,450 rpm Max. cutting height 120 mm (83 mm at 45°) Saw blade tilting 0° ÷ 45° Max. cutting width 1,300 mm Scorer Scorer unit motor power 0.75 kW (1 kW) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed 8,530 rpm Machine Dimensions Length 3,355 mm Width 3,450 mm Table height 892 mm Max. machine height 1,460 mm Table size 1,185 x 500 mm Extraction port diameter 100 + 100 mm Gross weight 680 kg Hedpen D Arhjfx Ag Refd Net weight 675 kg Aluminium Sliding Table CV360T Table size 3,200 x 360 mm Support frame size 1,240 x 650 mm Cutting length 3,200 mm Power supply protection 16 A (25 A) Noise level (without technology) 81.8 dB(A) Noise level (with technology) 85.3 dB(A) Location: Ex-stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), 12 mm rung punch used, in excellent condition manufacturer: Schleicher rung cutter 12 mm right-hand support table with stop slider required space approx. 1100 mm x 600 mm x 1100 mm weight approx. 65 kg Location: 54634 Bitburg, free loaded, unpacked handover in as-inspected condition, without warranty or guarantee Hedpfx Agsw Hlzto Rofd

Kondisi: baru, Tahun pembuatan: 2026, Optimum Optisaw SD 500 Double Miter Metal Bandsaw with Pivoting Saw Bow Item No. 3292380 Dimensions Length approx. 2122 mm Width/Depth approx. 1046 mm Height approx. 1497 mm Weight approx. 522 kg Electrical Data Coolant Pump Motor Power: 100 W Total Connected Load: 3.8 kW Supply Voltage: 400 V Mains Frequency: 50 Hz Machining Data Blade Speed(s): 35 / 70 m/min Blade Length: 3770 mm Blade Width: 34 mm Blade Thickness: 1.1 mm Cutting Angle: 45 – -60 ° Feed: Hydraulic via lowering cylinder Saw Bow Lift: manual Hjdsgd Si Ejpfx Ag Rsfd Cutting Capacities 0° round (solid): 355 mm 0° square (solid): 280 mm 0° rectangle vertical (solid): 280 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° rectangle vertical (solid): 250 x 250 mm +45° round (solid): 355 mm +45° square (solid): 280 mm +45° rectangle vertical (solid): 280 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° rectangle vertical (solid): 180 x 220 mm Heavy-duty industrial design Quiet operation High cutting accuracy due to vibration-free running Miter adjustment from -45° to 60° by swiveling the entire saw bow Supplied with a high-quality bi-metal saw blade as standard Microswitch for automatic end shut-off Coolant pump Ball-bearing saw blade guide with carbide inserts for optimum cutting results Easy lowering speed adjustment via feed control valve on the control panel Large, quick-release vice, laterally adjustable Clear and accessible control panel Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2022, Drilling depth: 170 mm Drilling width: 250 mm Spindle speed: 2,800 rpm HOLZKRAFT Mortising Machine LLB 30 Entry-level mortising machine with single-lever operation, eccentric clamp, dowel drilling device, and height-adjustable drill head with handwheel and digital display for fast and precise operation. Work table (LxW): 580 x 300 mm Drilling width: 250 mm Drilling depth (at 90°): 170 mm Drill head height adjustment: 200 mm Work table swivel range: not pivotable Tool holder: WESCOTT drill chuck Tool clamping range: Ø 0 - 20 mm Spindle speed: 2,800 rpm Motor power: 2.2 kW | 400 V - 50 Hz Extraction port: Ø 70 mm Dimensions (LxWxH): 1,500 x 920 x 1,400 mm Net weight: approx. 160 kg Includes dowel drilling device, eccentric clamp, digital height adjustment display, Wescott drill chuck 0-20 mm HOLZKRAFT Mortising Machine LLB 30 - Entry-level machine for professional mortising - Made in EU Easy operation via single-lever handle for fast and precise work Drill head with hardened prism guides and bearing with ball contact system Hfedpfoih H A Rjx Ag Red Drill head height adjustment with handwheel and digital readout Manual eccentric clamp Sturdy steel and cast iron construction Powerful three-phase motor Dowel device with index positions 16 | 22 | 27 | 32 mm Clamp stops allow quick and easy adjustment of the drill head travel Scope of delivery HOLZKRAFT Mortising Machine LLB 30 Drill head height adjustment with handwheel and digital display Dowel drilling device with index positions Eccentric clamp Wescott drill chuck 0 - 20 mm Operating manual with exploded view drawings, spare parts lists, and CE declaration of conformity Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Glue Application Machine / Glue Roller Machine Brand: ORMA/Osama Model: I/213 (S2R-1300) Working width: 1,300 mm Max. workpiece height: 100 mm Feed speed: 18 m/min Working height: 900 mm Application roller diameter: 185 mm Connected load: 0.5 Hp 0.37 kW Operator side: right Electrical specification: 400 V / 50 Hz / 3 phases Technical features: - Glue application machine frame constructed from welded sheet steel - Single motor drive for both rollers - Glue application rollers coated with acid-resistant special rubber, profile-ground and grooved, wear-resistant - The thick rubber coating can be profile-ground multiple times - Special dampers on the roller supports allow for automatic roller opening to compensate for workpiece unevenness up to max. 5 mm - Glue dosing via zinc-plated distribution tray, easily removable for cleaning - Hand wheel for roller opening adjustment - Roller safety guards - Electrical components to the highest quality standards Hodpfed Iz Dfox Ag Rsfd - CE compliant

Kondisi: baru, Tahun pembuatan: 2025, Vertical design for splitting short and meter-length logs Low ground plate for simple, fatigue-free loading of large logs Mechanical log lifting device positions heavy logs ergonomically Includes log support bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter fitted on all 400 V models Two-hand safety control system Easy transport with manual tow bar thanks to standard undercarriage with solid rubber wheels and additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage by simply lowering the cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Hsdpfx Aohkz Hmog Rjfd Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Rated power: 3.5 kW Electrical data Connection voltage: 400 V Line frequency: 50 Hz Machine data Maximum splitting force: 14 t Minimum log length: 560 mm Maximum log length: 1040 mm Minimum log diameter: 100 mm Maximum log diameter: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: From stock 54634 Bitburg - immediately available - Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2025, en-GB: Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing operations (not suitable for dust) 180° rotatable extraction unit allows extraction from above or below Robust metal impeller Supplied as standard with a premium chassis for improved stability and easy manoeuvring Quick-release fasteners for filter and chip collection bags Fine filter bag with double weave Dimensions and Weights Chip collection volume: 2 x 120 l External diameter of extraction inlet: 203 mm External diameter of extraction outlet: 1 x 100 mm, 2 x 120 mm Length approx.: 1,500 mm Width/Depth approx.: 500 mm Height approx.: 2,100 mm Weight approx.: 53 kg Electrical Data No-load speed: 2,950 rpm Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2 x 1.92 m² Noise Emission Max. sound pressure level: 87.5 dB(A) Air Flow Rate Nominal air flow: 2,800 m³/h Maximum negative pressure: 1,900 Pa Scope of Delivery: Two filter bags, two chip collection bags Location: ex-stock 54634 Bitburg Hjdpfshk S Sdex Ag Rjfd - immediately available -