Gergaji bundar dingin

EISELE VMS III-PV

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting range at 90° (Round): Ø 120 mm Cutting range at 90° (Flat): 150 x 110 mm Cutting range at 45° (Round): Ø 100 mm Cutting range at 45° (Flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment: Nlodpfx Abet A Ar Segji - Semi-automatic vertical cold circular saw - Pneumatic quick clamping device for material - Continuously adjustable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a very robust rectangular guide - Convenient, continuously adjustable stroke setting of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade service life - Easy saw blade exchange - High productivity with minimal space requirement (less than 1 m²) - Coolant system integrated in the machine base Space required: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be inspected and tested under power at our facility by appointment. All information is subject to change without notice. Subject to prior sale. The item is sold without any warranty. This exclusion does not apply to damages resulting from gross negligence or intentional misconduct by the seller, nor to injury to life, limb or health.

Kondisi: bekas, Tahun pembuatan: 1996, Spindle diameter: 60 mm X-axis travel: max. 1000 mm - min. 100 mm Y-axis travel: max. 1000 mm - min. 100 mm Drilling capacity in steel: max. 40 mm Tapping capacity: max. M24 Thickness: max. 60 mm - min. 5 mm Spindle speeds: stepless, adjustable 1 - 1,000 rpm Feed rate: steplessly adjustable, rapid traverse 1 mm/min Feed rate: steplessly adjustable, working feed mm/min Feed force: 16 kN Tool holder: SK 40 Spindle stroke: 600 mm Positioning speed in all axes: 1 - 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Table load capacity: max. 500 kg Nedpfx Absgvkkzsgjli Working height: 1,000 mm Machine weight: approx. 4.8 t Space requirement: approx. 3.5 x 3.3 x 3.1 m Control system: Bosch CNC Plate Drilling Machine HMB PBM1000/60 - W12 for drilling end plates and base plates in structural steelwork, equipped with tool changer (12-position) Number of drill spindles: 1 pc. Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA

Kondisi: bekas, Tahun pembuatan: 1985, Saw blade dimensions Ø 320-350 x 3.0 mm Cutting range 120 mm Cutting range at 90 degrees: square 90 x 90 mm Cutting range at 90 degrees: flat 200 x 90 mm Cutting range at 45 degrees: flat 140 x 90 mm Working height 925 mm Saw blade speeds 17 / 34 rpm Compressed air 6.0 - 8.0 bar Motor speed 1400 / 2800 rpm Total power requirement 2.0 / 2.6 kW Weight 470 kg Dimensions (LxWxH) 850 x 900 x 1800 mm Machine from a vocational school (NL) well-maintained condition (!!) Nljdpfx Aboxacbnogoi Equipment: - Semi-automatic vertical cold circular saw - Pneumatic quick-acting material clamping device - Infinitely adjustable saw blade feed - Convenient mitre adjustment with fixed stops - Easy lifting adjustment of saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long blade life - Easy saw blade change - High productivity with minimal space required (less than 1 m²) - Coolant system * Machine link: ?machineno=1008-9164094

Kondisi: bekas, Tahun pembuatan: 1975, item123 Nsdpfx Ajw Nrvbjbgjli

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 152362081, kedalaman tenggorokan: 2.700 mm, kecepatan spindel (maks.): 1.800 rpm, kecepatan spindel (min.): 9 rpm, ketebalan pelat baja (maks.): 100 mm, diameter spindel: 110 mm,

Kondisi: bekas, Tahun pembuatan: 1989, Saw blade diameter 320 mm Cutting diameter 140 mm Total power requirement 3 kW Machine weight approx. 0.5 t O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following from stock without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Type VMS III-S-PV Nledsw Dvivepfx Abgoi Year of manufacture 1989 _____ Max. saw blade Ø 320 mm Cutting capacity: Tubes approx. 130 mm Flat material 200 x 100 / 140 x 100 mm Solid material square 120 mm Note: Smaller cutting dimensions may apply for mitre cuts Up to max. 140 mm Blade stroke manually vertical approx. 200 mm Saw blade speeds 17–34 rpm Saw drive approx. 2 / 2.6 kW Total drive approx. 3 kW – 380 V – 50 Hz Weight approx. 500 kg Accessories/Special equipment: • Saw head adjustable for mitre cuts at 30° / 45° / 90° via scale • Pole-changing three-phase motor with max. 2.6 kW drive • Saw carriage feed manually via long and adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant device with chip tray • Roller conveyor material infeed approx. 2,000 mm • 2 spare saw blades Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. We also have further larger EISELE cold circular saws and other (band/frame/cold circular) saws in stock. Further sawing machines available at all times – please enquire with us.

Kondisi: baru, Tahun pembuatan: 2025, CORMAK 400 metal lathes are the new, improved version of the popular metalworking lathes. Among other enhancements, the tool post guard has been upgraded, the spindle bearing system improved, and a new digital readout has been installed. These machines are suitable for production plants, workshops, and tool rooms, making them ideal for single-unit and small batch production. NEW, IMPROVED MODEL!!! - High-quality, reinforced spindle bearing system - New guard system compliant with CE standards - Latest model digital readout for axes - Reinforced and modernized lathe base with tool drawers and a pull-out chip tray Machine features - REINFORCED, RIBBED BEDWAY PROVIDES MAXIMUM VIBRATION REDUCTION; BED IS ALSO PRECISELY GROUND AND HARDENED - 2-AXIS DIGITAL READOUT INCLUDED AS STANDARD - OPTIMAL WORK RESULTS THANKS TO LARGE 52 MM SPINDLE BORE - ADEQUATE BED WIDTH FOR STABLE AND PRECISE WORKING CONDITIONS - MACHINE EQUIPPED WITH HIGH-QUALITY, REINFORCED SPINDLE BEARING SYSTEM - EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND THE INCLUSION OF BOTH FEED ROD AND LEADSCREW - HARDENED GEARS IN SPINDLE GEARBOX - ADJUSTABLE OVERLOAD CLUTCH ON FEED SHAFT - THREAD CUTTING ACROSS FULL RANGE WITHOUT THE NEED TO CHANGE GEARS IN THE GEARBOX - FEED SELECTION LOCK: VIA LEADSCREW OR FEED ROD - REMOVABLE BRIDGE ALLOWS MACHINING OF LARGER DIAMETER WORKPIECES - PULL-OUT CHIP TRAY AND TOOL DRAWERS FOR MORE EFFICIENT WORKFLOW Technical Data Maximum turning diameter: 400 mm Maximum turning diameter above carriage: 250 mm Maximum turning diameter in gap: 520 mm Turning length between centers: 1000 mm Bed width: 218 mm Spindle nose: CAMLOCK D5 Spindle taper: MT6 Spindle bore: 52 mm Spindle speed range: 65–1810 rpm Number of spindle speed ranges: 16 steps Longitudinal feed range: (40) 0.053–1.291 mm/rev Cross feed range: (40) 0.011–0.276 mm/rev Maximum tool size: 25 mm x 25 mm Metric threads: 0.4–7 mm Inch threads: 4–60 T.P.I. Module threads: (22) 0.4–3 mm Diametral pitch threads: (28) 8–84 D.P. Tailstock sleeve diameter: 50 mm Tailstock quill stroke: 110 mm Tailstock quill taper: MT4 Motor power: 2.2 kW Coolant pump power: 0.1 kW Weight: 640 kg Dimensions: 2000 x 820 x 1650 mm Standard Equipment Nsdpfsiz Tczjx Abgeli - 2-axis digital readout - Fixed steady rest - Travelling steady rest - 3-jaw chuck 200 mm - 4-jaw chuck 200 mm - Face plate 280 mm - MT4 live center x2 - MT6/MT4 reducing sleeve - Set of service wrenches For more information, please visit our website.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, panjang mata gergaji pita: 4.115 mm, lebar pita gergaji: 41 mm, tinggi total: 20.000 mm, panjang total: 20.000 mm, lebar total: 20.000 mm, daya: 0,004 kW (0,01 hp), Full-hydraulic high-performance band saw in extra heavy-duty design, featuring a horizontally and parallelly adjustable saw band for cutting profiles, tubes, and solid materials of all grades—including extremely difficult-to-machine materials such as titanium, Inconel, and Hastelloy. Suitable for operation with bi-metal and carbide saw bands. The saw unit is manufactured from solid polymer concrete, ensuring maximum smooth operation and extended saw band service life. Nodjrnkrujpfx Abgjli Saw unit guidance via one vertical and one round column guide (double-column guide) with hardened and ground guiding rails. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping is performed by two hydraulic vices. The machine is designed for user-friendly operation. Cutting length can be set via handwheel with 0.1 mm resolution. The piece count is set via a counter; upon reaching the preset quantity, the machine automatically shuts down. Material feed is handled by a feed cylinder, ensuring maximum cutting precision. The machine is easy to operate and works fully automatically. SSB 260 VA Cutting capacity: 260 mm x 260 mm (Ø 260 mm) Technical Data: Bandsaws KASTO Band Saw Automats Machine Type: SSB 260 VA Technical Details: Double column guided Year of manufacture: 1991 Cutting range: 260 x 260 mm Drive power (saw drive): 4 kW Drive power (aux. units): 6.5 kW Cutting speed: 15–125 m/min Saw feed hydraulics: stepless adjustment Saw band dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Max. multi-feed length: 5400 mm Material support height: 850 mm Machine dimensions (L x W): 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Accessories: Chip conveyor, Coolant system Multi-feed Side guide rollers Machine roller conveyor Adjustable side guide rollers Prepared for bundle clamping device Multi-feed counter Hydraulic hold-down device

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), SANDMASTER FG2-20-2-9 shot peening machine Nlodsfcpxuepfx Abgoi Nozzle feed drive: 0.10 kW, lighting: 24 W, blasting pressure range: 0.5 - 8 bar, abrasive grain size: 0.1 - 0.30 mm, fan motor: 250 W, filter area: 1 m², pressure loss in filter housing, inlet – outlet total: 170-250 Pa, noise level with built-in silencer: 62 dBA, electrical connection voltage: socket 3 x 400 V 50 Hz, 16A (3P+N+E), compressed air connections: min. 1/4" compressed air line with hose nipple for 13 mm inner diameter hose, required compressed air quality: ISO8573-1 class 1.7.2, maximum feed length: 350 mm,

Kondisi: baru, Thread diameter M10 - M33 mm Infinitely variable speed 35/115 rpm Torque 320 Nm Nodsfg U Slopfx Abgeli Air pressure 6 - 8 bar Working range 400 - 2000 mm The pneumatically driven D-JSC tapping machine is equipped, among other features, with a pneumatic motor featuring a quick-change chuck and a robust, flexible working arm. The tapping arm can be mounted directly onto the worktable using the mounting flange and is immediately ready for operation, allowing for rapid changeover times. It is possible to bring the tap directly to the desired tapping hole without needing to position the component under the tap. The unit design includes an adjustable angle, allowing the quick-change chuck to be tilted so that horizontal tapping is also possible. Pneumatic tapping machines for M3 - M12 threads, with adjustable angle. 6 quick-change chucks with safety clutch included. Options: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm - Magnetic base.