Gergaji mitra

Graule ZS 200N - 5kW

Kondisi: baru, 400 V three-phase brake motor, 5.0 kW Saw blade diameter: 520 mm Hnedpovxr Thofx Alcjl Saw blade bore: 50 mm Cutting height: 200 mm Saw blade tilted at 45°: cutting height 140 mm Cutting length: 420 mm Includes machine stand and rear hand crank for tilt adjustment.

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm Hjdpfoxnlgcsx Alcenl - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Hsdpfxoi Dfido Alconl Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), ketinggian potong (maks.): 200 mm, diameter mata gergaji: 520 mm, kecepatan rotasi (min.): 2.800 rpm, panjang pemotongan (maks.): 420 mm, tinggi benda kerja (maks.): 200 mm, panjang pemakanan sumbu X: 420 mm, hentian panjang: 8.800 mm, tekanan: 5 batang, persyaratan ruang panjang: 8.800 mm, lebar yang dibutuhkan: 1.200 mm, Perlengkapan: dua sisi, Mobile saw table; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 to 5960 mm, with digital LED measuring display, measuring length including extension approx. 8800 mm. Hodpfx Alov Hhg Tocenl Saw table with 6 crank supports ensures stable positioning during operation. Equipped with electrical power distribution and triple 230 V socket outlet. Mobile saw table Beck ESF 1, ZS 200 saw mounted on base frame

Tahun pembuatan: 2024, Kondisi: baru,

Kondisi: baik (bekas), Max. bar passage: 36 mm Max. spindle speed: 6,300 rpm Number of spindles: 2 Control: Traub TX8i Tool Turret 1: Number of tools: 12 X-axis: 50 mm Z-axis: 50 mm Front Tool Turret: Number of tools: 7 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Hjdpstrvzxefx Alcjnl Rear Tool Turret: Number of tools: 5 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Kondisi: baru, Tahun pembuatan: 2026, - Mesin Perata Tfon Leveltech® S-3513. - Tfon Leveltech® S-3513 adalah mesin perata presisi yang dioptimalkan untuk material ultra-tipis, menggabungkan kontrol elektromekanis canggih dengan pengoperasian yang mudah guna menghasilkan hasil pelatakan yang konsisten dan berkualitas tinggi. - Spesifikasi Utama: Ketebalan Material: 0 – 0,3 mm Lebar Material Maksimum: 1.300 mm Panjang Material Minimum: 70 mm Sistem Pergantian Cepat untuk Roller Perata: Standar Penyesuaian Celah Perataan: Elektromekanis / Kontrol PC Dimensi Mesin (P × L × T): 2.685 × 1.585 × 1.820 mm Hnjdpfx Alskyrzlscsl Total Berat: 5.000 kg.

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW Hnedpjwvqkljfx Alcjl • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: baru, Tahun pembuatan: 2025, The SQUALO 515 single-shaft multi-blade or multi-rip circular saw, in the LM version, is distinguished by its advanced mobile blade system. The machine is equipped with motorized feed rollers on the worktable and top motorized pressure rollers, ensuring effective all-wheel drive for precise and consistent material transport. In the LM (Mobile Blades) configuration, the cutting unit consists of one fixed blade and a variable number of one to three mobile blades. These mobile blades can be dynamically positioned to accommodate various trimming and multiple cutting requirements. Hedjhpbxijpfx Alcenl A distinctive feature of this model is the possibility to expand its cutting capacity: by using special spacers, the number of blades used simultaneously can be increased up to six. It is important to note that the blades mounted on these special spacers operate at a predetermined fixed distance, allowing for the efficient production of components with standardized widths. This versatility enables the machine to seamlessly switch from operations requiring flexible blade positioning to serial production with fixed cutting intervals.

Kondisi: baru, Tahun pembuatan: 2025, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Worktable: 480x1060 mm Working height: 900 mm Oil tank: 10 liters Maximum workpiece height: 200 mm Flat capacity: 200x12 mm Tube capacity: 48x4.0 mm *not with standard tooling - Digital limitation of stroke and return. - NC control. - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table Hedpjhgib Njfx Alcjnl - The ZOPF design allows quick tool changes without loss of precision - The hydraulic cylinder is mounted on the heavy-duty machine table to prevent any loss of accuracy even under heavy load. - With the universal tool holder and various tools, you can work extremely flexibly.