Rak barang panjang

GUSTOS D-5-3000-D

Kondisi: baru, racking load capacity 10,000 kg load capacity per level 2,000 kg number of storage levels 5 units recommended material length 6,000 mm upright spacing 3,000 mm rack height 2,440 mm dimensions (L x W x H): 3.8 x 0.9 (1.35) x 2.45 m the ideal solution for storing long materials with 2 uprights. - each shelf pivots outward, allowing loading and unloading with an overhead crane at any time. - single-sided version. Nwodjfgygzepfx Adisi

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Spindle drive 4.5 kW Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. Nwsdpfot Hw T Sjx Adiji • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Payment: strictly net – upon receipt of invoice

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), 1 used short bar loader Manufacturer: Breuning Model: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Bar length: 100-1200 mm Njdpfsht Rl Eex Adiswi

Kondisi: bekas, Module milling cutter Nwjdpfx Aedklt Nodiji Module 8 20 degrees Length 1800 mm Diameter 120 mm Bore 40 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized Nwedpsh Ek Dajfx Adisi - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 15.208 h, jarak pergerakan sumbu X: 730 mm, jarak lintasan sumbu Y: 730 mm, jarak gerak sumbu Z: 880 mm, berat keseluruhan: 12.000 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 21.000 W, jumlah sumbu: 4, This 4-axis DMG MORI NHX 5000 machining center was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and travel ranges of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine is equipped with a robust pallet size of 500 x 500 mm and has a tool capacity of 40 tools. If you are looking for high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining center we are offering for sale. Please contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool holder: BT40 • Tool magazine capacity: 40 tools (optional magazine for 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 Njdpjyt Hwzofx Adiowi • Automatic rotary pallet changer: 2 stations • NC table B-axis: direct drive, indexing 0.001°, max. speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct measuring system; linear scale standard • Control unit: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal light • Water-glycol spindle cooling • Application tuning cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Max. input current: 67 A • Protection: 125 A • Short-circuit current: 1.25 kA • Max. supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating hours: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll flow monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper size: BT 40

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 2.963 h, Fungsionalitas: berfungsi sepenuhnya, 01 Nedpfxew Igyre Adiswi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 11.700 h, daya: 8,9 kW (12,10 hp), jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 300 mm, kecepatan spindel (maks.): 27.000 rpm, The machine is used for precision machining of smaller parts (aluminum, steel). Njdsq N Ayfopfx Adijwi

Kondisi: sangat baik (bekas), Focker Strähler Welding Positioner, 8 Tonnes - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Speed range: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted, center): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm Nwsdpfx Adjf Ezdneiji Condition: Visually and technically excellent, runs very quietly

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Nwodpfx Aomhhypjdisi