Mesin pengepakan bal

HSM GmbH + Co. KG VK 8818 R-FU

Good day,

We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations.

The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability.

Technical specifications of the press:
Manufacturer: HSM GmbH + Co. KG, Germany
Type: VK 8818 R-FU
Year of manufacture: 2015
Operating hours: 20,331 hours (as of September 2025)
Number of bales pressed: 29,020 bales (as of September 2025)
Main press force: 1000 kN
Specific press force: 120 N/cm²
Cutting edge ejector press force: 121 kN
Feed chute dimensions: 970 x 1,800 mm
Theoretical cycle time in idle: 8.3 seconds
Theoretical throughput: 643 m³/hour
Dkjdoyz Af Eepfx Ahuek
Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm
Drive power: 2 x 45 kW, frequency controlled
Connected load: 110 kW
Total power consumption: 213 A
Fusing: 250 A slow-blow
Tying: 5-fold horizontal, fully automatic
Throughput at a bulk density of:
20 kg/m³: 12.86 t/hour
50 kg/m³: 32.15 t/hour
Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material
Hydraulic oil tank volume: 2,000 L HVI 46
PLC control: Siemens S7-300
Operator panel: Siemens TP 700
Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H)
Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H)
Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t)

Additionally ordered special equipment:
Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance
Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials
Cutting edge ejector with 121 kN press force
Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire
Bale chute
Visual warning signal mounted on the control cabinet

Condition of the press:
The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines.

Technical data for the chain belt conveyor:
Manufacturer: Stadler Anlagenbau GmbH
Type: Chain Belt Conveyor KF 1800
Year of manufacture: 2015
Belt speed: 0.36 m/second
Feed belt length: 7,000 mm
Inclined belt length: 14,500 mm
Gooseneck length: 1,550 mm
Incline: 30°
Nominal width: 1,800 mm
Usable width: 1,638 mm
Overall conveyor height: 7,745 mm
Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H)

Scope of delivery:
- HSM VK 8818 R-FU baler
- Maintenance platform
- Bale chute
- Wire redirecting stations
- Wire spool trolleys (without wire spools)
- Stadler KF 1800 chain belt conveyor
- Transverse sliding belt conveyor
- Pit cover from feed conveyor to pit
- Second control cabinet for operating the press at the conveyor
- Machine documentation in English

Delivery time:
The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment.

We would be pleased if this or one of our other presses is of interest to you.

Your Service Team, Mertens & Frowein GmbH

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.