Baler

MACFAB 150 Auto HT

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, | Model | Lokomo C-140B Jaw Crusher | | Bukaan Pengumpan (Lebar × Tinggi) | sekitar 1400 mm × 1000 mm | | Ukuran Maksimal Pengumpanan | sekitar 600–800 mm | | Nilai Kekuatan Material yang Dihancurkan (mis: batuan) | ~200 MPa (sangat tergantung pada material) | | Kapasitas (Throughput) | estimasi 400 t/h | | Daya Motor | 200 kW | | Rentang Berat | 55 ton | Lsdpfx Aaoxcg Spoheta

Kondisi: siap digunakan (bekas), Cone Crusher Svedala Merek: Svedala Tipe: 36/H/MC Ljdpfx Aaepn I H Tjhsta Termasuk: sasis dasar dan unit oli

Tahun pembuatan: 1982, Kondisi: baik (bekas), nomor mesin/kendaraan: 14320, BALER / PAPER BALER Ledpfxeiuky Ij Aahjta

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed Ltodpfxjvwlqqe Aahea - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: belum diuji (bekas), Hydraulic press for compacting paper and similar materials. The machine was fully operational prior to disassembly. Press dimensions: Ltedpfeh Nyfyjx Aahoa Length: 4850 mm, width: 1370 mm, height: 3000 mm (can be reduced to 2300 mm). Weight approx. 3500 – 4000 kg. For further information, please contact: +48 539 660 495.

Kondisi: bekas, Mount: MK 4 Ltsdpjb N Ezrjfx Aahja

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, Jaw crusher single-toggle bekas 1300 x 900 mm, termasuk poros cadangan dan bearing FAG 23152 K MB C3. Tahun pembuatan dan merek tidak diketahui. Crusher beroperasi tanpa masalah hingga 2023 dan kemudian diganti dengan unit bergerak. Ltjdpfswmgw Nsx Aahsa

Kondisi: bekas, Tahun pembuatan: 2011, nomor mesin/kendaraan: 340000674, The HSM baling press V-Press 403 is a compact solution for the efficient compaction of waste and recyclable materials. This used press delivers outstanding performance and is ideal for businesses looking to optimize their waste management and save space. With its robust construction and user-friendly operation, it is perfectly suited for use across various sectors. Technical specifications: Machine No.: 6113.114 Serial number: 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Motor output: 1.1 kW Rated current: 2.6 A Ledpfeunzn Nsx Aahjta Year of manufacture: 2011 Weight: approx. 300 kg

Kondisi: bekas, Tahun pembuatan: 2003, Technical details: Pressing force: 40 t Hopper opening: 1200 x 730 mm Ltsdpfou Nw Ezex Aahsa Material: Cardboard, plastic – e.g., PET bottles Voltage: 400 V / 50 Hz Total power requirement: 16.4 kW Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling applications – Incl. feed unit/conveyor belt, LxW: 4500 x 1000 mm, motor-driven – Equipped with automatic 3-fold tying unit – Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm with 1.2 m³ volume Bale size (LxWxH): 300–1500 x 800 x 800 mm Bale weight: 250–450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; Filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; Fill height: 2500 mm

Tahun pembuatan: 2001, Kondisi: baik (bekas), HSM-500.1_VL PRESS PAPER BALER FILM BALER BALE PRESS Immediately ready for use, good CONDITION Used & in good shape / see photos Model: HSM 500.1 VL Machine No.: 6135.244.P Serial No.: 220109689 Pressing force: 50 tons V 400; Hz 50 KW 7.5 Amp. 15.5 Pressing power: 6 tons Year of manufacture: 2001 More presses available in our other listings Item is used and in good condition / roughly cleaned (Just plug it in and start working) Dimensions: Available on request! Additional photos show possible applications. All items visible in the photos are also available from us. Price stated is net per unit for collection from warehouse, 47441 Moers Current stock: 1 unit Inspection is expressly offered. More equipment available in stock Ljdpfslc Du Nox Aahjta see photos or contact us by phone General information: We offer here items from various acquisitions, which we describe as accurately as possible and provide meaningful photos. We cannot provide further details on the item. We offer the possibility of viewing on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone arrangement. The item can be collected immediately if needed. We can only respond to inquiries about this item if you provide a telephone number in your request due to time constraints. Unless explicitly described otherwise, this offer concerns USED GOODS. Packaging may be damaged. Items have been visually inspected and are technically ok as far as we can determine. All offers ex-warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and transport costs. Feel free to call if interested. All dimensions are approximate. Errors in the description expressly reserved.