Beli Cincinnati Mesin Broaching bekas (78.217)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 370 kg, daya: 3,5 kW (4,76 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang broaching: 800 mm, kecepatan broaching: 3 m/menit, panjang total: 920 mm, lebar total: 800 mm, tinggi total: 1.950 mm, Hersteller: Rausch (Haan/ Rhld) Modell: RS 3 G/ 800 Maschinen-Nr.: 2968/424 Baujahr: 1970 Gewicht: 370kg Überholung: 8/2025 durch Fa. Wiemers AG Unsere Ref. / Maschinen-Nr.: WAG 787 Allgemeine Informationen / Technische Daten: Ungenutzte, generalüberholte mechanische Vertikal-Räummaschine von Rausch Zugkraft: 3.000kg (30kN) Räummgeschwindigkeit: 3m/min und 6m/min Rücklaufgeschwindigkeit: 3m/min Maximaler Hub: 800mm Maximale Werkzeuglänge: 1.000mm Tischgröße / Arbeitsfläche: 340mm x 220mm / 430mm x 310mm Tischdurchlass: Ø 90mm für Standard-Räumdorne Werkstückdurchmesser: beliebig (ohne Spritzschutzkabine) Abmessungen (H x B x T): 1.950mm x 820mm x 900mm (Höhe = Tischhöhe zum Boden ohne Aufbauten) Motor: 3,5 kW Stromversorgung: 400 Volt / 50 Hz Zubehör / Sonderausstattung: - Modifiziertes Antriebssystem mit Getriebemotor und Zahnriemenantrieb - 2 Räummgeschwindigkeiten: 3m/min & 6m/min - Extern verstellbarer Hub, werkübergreifendes reproduzierbares Werkzeuglängen-Einstellsystem - Integrierte Kühlmittelanlage mit Rückschlagventil und Ablasshahn sowie Wahlschalter für Automatikbetrieb (keine automatische Schaltung im Schwenkbetrieb) - Patentiertes Kühl-/Schmiermittel-Schwenksystem - Dreiseitig geschlossene, nach vorne offene Spritzschutzkabine (ohne externes Bedienpult) - Maschinenverkleidung unterhalb der Schutztür mit Späneschutz und Abstellplatz für Werkzeuge - Elektrische Leitungsführung in Stahl-Schutzrohren - Elektrische Spannbackenabtastung (Werkzeugentnahmekontrolle, verhindert unbeabsichtigtes Zurückfahren der Zugbrücke) - Schutztür mit integrierter Not-Aus-Funktion - Bedienpanel aus Edelstahlblech mit dauerhafter Kennzeichnung - 4 zentrale Schmierpunkte für den Trapezspindelantrieb - Maschinendokumentation Hinweis: Die Maschine wurde komplett überholt und das Maschinengehäuse vollständig aufgearbeitet. Folgende Verschleißteile wurden ersetzt: - Neue Trapezspindeln und Spindelmuttern aus verschleißfester Bronze - Sämtliche Lager und Dichtungen erneuert - Zentraler Antriebswelle ersetzt - Komplettes Kühlmittelsystem (Pumpe, Rückschlagventil, Ablasshahn) inkl. Schmiermittel-Schwenksystem erneuert - Neue Spannbacken (Zugbrücke zusätzlich verstärkt) Isdpfsytvyxsx Apaotk - Spannbackenabfrage mit Abschaltfunktion verbaut (zusätzliche Sicherheit für Bedienpersonal und zum Schutz vor Werkzeugbruch) - Schutztür mit Sicherheits-Abfrage ersetzt alten Gummischutz - Werkzeuglängen-Einstellsystem außerhalb des Maschinenraums verlegt - Zusätzliche Endschalter für Endlagen verbaut - Komplette neue Elektrik (Schaltschrank) mit Siemens-Komponenten - Edelstahl-Bedienpanel mit dauerhafter Kennzeichnung - Neuer Getriebeantriebsmotor (SEW) mit Zahnriemenantrieb - Maschine mit 2-Komponenten-Strukturlack neu lackiert Die Maschine befindet sich in unserem Lager und kann unter Strom besichtigt werden.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Mesin Baru Mesin Pembuat Alur Vertikal VADARI GmbH TIPE SRM 2027-60 KN - juga tersedia dengan 90 KN atau 120 KN! MESIN PEMBUAT ALUR, DIBUAT DI JERMAN. Catatan: Mesin ini juga dapat ditawarkan dan diproduksi dalam varian dengan gaya tarik 90 KN (9 Ton) atau 120 KN (12 Ton). ==> Saat ini, karena akan ada produksi massal, tersedia dengan harga khusus yang menarik! ==> Informasi untuk perusahaan manufaktur atau dealer dengan produksi sendiri: Jika diperlukan, gambar, hak, suku cadang, data pelanggan dan calon pelanggan, dokumen perencanaan dan produksi (termasuk perencanaan untuk varian dengan gaya tarik 9 Ton) dari mesin pembuat alur dapat dibeli dari kami. Jika Anda tertarik, silakan hubungi kami. ==> Mesin baru diproduksi berdasarkan pesanan. Produksi dan pengiriman cepat dimungkinkan. ==> Saat ini, suku cadang seperti spindel dan mur spindel untuk mesin pembuat alur Wolff SRM dan VADARI SRM tersedia dan siap dikirim. Mesin pembuat alur vertikal yang hemat biaya dan sangat kuat untuk penggunaan jangka panjang. Alat pembuat alur (termasuk jarum khusus untuk roda gigi dalam, dll.) dan aksesori tersedia. Silakan tanyakan secara terpisah. Semua alat pembuat alur dan dudukan pembuat alur dari produsen lain dapat terus digunakan pada mesin pembuat alur kami! Produksi dan perakitan lengkap dilakukan di pabrik kami di Jerman. Selain itu, kami juga menawarkan suku cadang untuk mesin pembuat alur Wolff dan VADARI - SRM (spindel, mur spindel, motor, roda gigi, serta semua komponen lain yang diperlukan - termasuk kelistrikan). Mesin pembuat alur vertikal Tipe SRM 2027 - MESIN BARU: Varian 60 KN: Area penggunaan terutama dalam pembuatan alur pasak dari 3-28 mm (tetapi juga lebih dari itu) dan profil dengan dimensi serupa. Karena mesin yang ringkas dan tidak memakan banyak tempat, mesin ini dapat digunakan dengan sukses di perusahaan kecil, menengah, dan besar. Harga yang terjangkau membenarkan pembelian bahkan untuk produksi seri kecil dan pembuatan satu unit. Penggerak dilakukan melalui motor rem dengan gigi yang dapat diubah kutubnya. Penggerak spindel ganda yang tidak memerlukan perawatan memastikan pengoperasian yang lancar dan titik tarik sentral, serta kinerja pemotongan yang konsisten. Meja alat yang bebas memungkinkan benda kerja yang besar ditempatkan tanpa hambatan. Dalam kebanyakan kasus, benda kerja yang akan dibuat alurnya tidak perlu dijepit dengan kuat. Pengaturan langkah dilakukan dengan sakelar ujung yang dapat disesuaikan dengan pembatasan langkah. Untuk hub pendek/benda kerja, beberapa benda kerja dapat ditempatkan di atas satu sama lain. Jarum pembuat alur, mandrel, dan suku cadang tersedia berdasarkan permintaan. Data teknis: Gaya tarik: 60 KN pada 3m/menit, 40 KN pada 6m/menit. Kecepatan pembuatan alur: 3m/menit + 6m/menit. (Opsional: pengaturan kecepatan variabel (dari 0 m/menit hingga 6m/menit dimungkinkan melalui elektronik yang diperluas) Kecepatan balik: 6m/menit. Langkah: 1050 mm Panjang alat pembuat alur: 1200 mm Diameter benda kerja: apa saja Meja kerja: 450 x 350mm Lubang meja: 140 mm Berat: sekitar 510 kg Luas dasar: 750 x 570 mm Tinggi keseluruhan mesin: 1510 mm Daya penggerak: 3,7 / 4,4 KW Peralatan listrik: 400 / 230 Volt 50 Hz Tegangan kontrol: 230 Volt Tegangan operasi: 400 Volt 50 Hz Pengecatan: Luar RAL 7035/7036/7016, Dalam RAL 3000 Pintu pengaman: Peralatan standar Ijdpfxjuqbnho Apaetk Peralatan pendingin: Peralatan standar Mesin ini sesuai dengan Arahan Mesin terkini dan memiliki tanda CE.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, nomor mesin/kendaraan: M 09074, berat keseluruhan: 950 kg, daya: 8 kW (10,88 hp), tegangan masuk: 400 V, Spesifikasi teknis: Penyesuaian manual: 400 mm penyesuaian manual Siklus pembuangan otomatis: 250 mm, siklus otomatis Lebar alur pasak: 2 hingga 32 mm Diameter benda kerja: 620 mm Gaya tekan maksimum: 20 kN nilai tetap Kecepatan pemotongan: 15 m/menit, dapat diatur secara kontinu Dimensi (L x P x T): 1000 x 1200 x 2440 mm Berat bersih: sekitar 950 kg Koneksi listrik: 3 x 400 VAC, 50/60 Hz, 8 kW Koneksi pneumatik: tidak diperlukan Warna: Biru RAL 5001, Abu-abu RAL 7035 Itsdpfx Aeyazc Sopask Detail, lihat deskripsi PDF terlampir.

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17065, manufacturer: Henning model: U6/1000 machine no.: 17065 year of manufacture: 1979 gross weight: 1,100 kg general / technical data: Itedpfx Apjup Uzfsaek used mechanical vertical broaching machine Henning, in operational condition drawing force: 6,000 kg (60 kN) broaching speeds: 3 m/min and 6 m/min return speed: 6 m/min maximum stroke: 1,000 mm maximum tool length: 1,200 mm table size / working area: 600 x 460 mm / 480 x 340 mm table opening: Ø 170 mm with eccentric table insert featuring Ø 90 mm borehole for standard broaching mandrels (Rausch system) workpiece diameter: unlimited dimensions (h x w x d): 1,650 mm x 1,200 mm x 700 mm (height = table height to floor, excluding superstructures) motor: 7.4 / 10 kW power supply: 380 Volt / 50 Hz accessories / special equipment: - integrated coolant system - return stroke control with dual activation mode - machine documentation - automatic jaw opener at lower pull bridge position (for tool removal) - tool clamping with universal jaws for flat shanks DIN 1416 BL 6 remarks: The machine is in its original condition and functionality has been tested. The machine is mechanically driven via trapezoidal thread spindle and geared motor. Unlike most mechanically driven broaching machines, in which the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. As a result, the machine is additionally column-guided and very robustly constructed. The double spindle drive is ideal for maintaining a constant cutting speed even at higher drawing forces. The machine is in stock at our warehouse and can be inspected under power.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin pembentuk alur dan pemotong Hoyton model GH-500, panjang alur maksimum 500 mm, lebar alur maksimum 50 mm, kecepatan pemotongan 7,5 mpm, kecepatan mundur 15 mpm, daya 3 hp, mesin dalam kondisi baik, dilengkapi dengan lemari atau meja kerja yang berisi berbagai aksesori. Meja kerja ini berukuran 2 meter panjang x 1 meter lebar x 93 cm tinggi, memiliki penjepit meja dan kepala pembagi datar. Iedpszmp H Refx Apajtk

Kondisi: baik (bekas), Tahun pembuatan: 1980, nomor mesin/kendaraan: 20007, Penawaran 23326 Isdsyfgc Ijpfx Apaetk Data teknis: - Lebar jarum broaching hingga 10 mm - Panjang jarum broaching hingga 1000 mm - Gaya tarik 1,5 t - Kecepatan kerja 4 m/menit - Tinggi kerja / pengoperasian 1000 mm - Penggerak 400 V / 1,5 kW - Kebutuhan ruang sekitar P 1500 x T 1000 x L 400 mm - Berat sekitar 200 kg

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 400 kg, tegangan masuk: 400 V, panjang broaching: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400 kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / working surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard broaching tools “Rausch system” Workpiece diameter: arbitrary (removable coolant swivel system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shanks) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (height incl. 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Electrical supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Safety door with safety monitoring (emergency stop circuit) - Easily removable chip chute with storage for tools - Externally adjustable tool length setting system (Rausch system) - Protective cover for stroke adjustment and electrical switch units - Electrical detection of clamping jaws (prevents unintentional return of the pull bridge, providing additional safety for operator and tool) - Integrated coolant unit - Coolant swivel system (without electrical switching function) - Three-sided splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip sieve with magnetic insert - Stainless steel operator panel with permanent marking Itodpfow Huh Nex Apaok - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled, with the machine body completely refurbished. The following wear parts have been replaced/renewed: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced - Coolant system incl. coolant/lubricant swivel system replaced - New dual-speed SEW gearmotor - New electrics (Siemens) - New safety door instead of light barrier - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve, and spindle guard, are new - Stainless steel operator panel with permanent marking - Machine repainted with 2-component structural paint The machine carries the manufacturer’s CE marking. General: The double-spindle drive ensures smooth operation with a central pulling point and consistent broaching speed. The machine is primarily designed for producing keyway slots up to 18 mm (from 16 mm slot width only with stepped tool shanks). Due to its design, the machine enables quick and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table make it possible to use both profile and flat broaching tools without additional pull heads.

Kondisi: bekas, Tahun pembuatan: 1986, berat keseluruhan: 6.500 kg, daya: 42 kW (57,10 hp), tegangan masuk: 380 V, panjang broaching: 1.600 mm, jumlah posisi broaching: 1, diameter benda kerja (maks.): 500 mm, Manufacturer: Varinelli Milano, Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine number: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Broaching stations: 1 piece Clear width between cylinders: max. 540 mm Cutting speed: hydraulically variable from 1 m/min up to max. 8 m/min Return speed: hydraulically variable up to max. 18 m/min Machine footprint: see machine layout drawing Power supply / connected load: 380 Volt, 50 Hz / 42 kW Accessories / Special Equipment: Isdpfx Ajwqmaxjpajtk The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-actuated locking mechanism (DIN 1417) in the drawbridge. The tool feeder system is locked hydraulically and mechanically. The machine features a coolant unit with an integrated chip conveyor for installation in a pit. Remarks: The machine still has its original paintwork. It is designed for use in series production for medium and large batch sizes. For optimal utilization, installation in a pit is ideally recommended. Draw heads and ejector pins are available on request. The machine is available for inspection at our warehouse. General Information: We constantly have a large selection of approx. 80 used broaching machines with pulling forces from 3,000 kg up to 63,000 kg, both in horizontal and vertical execution, in stock. Many of our broaching machines in stock are available for demonstration. If required, we can offer you used equipment such as draw heads, ejector pins, broaching tools, and other specific accessories. As a contract broaching service provider, we can also assist you with technical enquiries based on our 50 years of experience in broaching technology.

Kondisi: bekas, TECHNICAL DATA - Maximum force: 63 kN - Broaching length: 1000 mm - Spindle stroke: 400 mm - 3 broaching speeds: 2.5 - 5 - 7.5 m/min - Return speed: 24 m/min - Number of machining stations: 1 - Hydraulic motor: 9 kW - Hydraulic capacity: 600 l - Cooling capacity: 150 l - Main voltage: 400 V - Total power: 10.5 kW - Required space: 3,700 x 3,000 mm - Height: 3,200 mm Itedpeug U H Uefx Apaok - Weight: 3,500 kg

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) Isdpew H Dgnsfx Apaetk - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Kondisi: belum diuji (bekas), Tahun pembuatan: 1988, Pelat penjepit: 595 x 445 mm Panjang langkah: 400 mm Langkah: 400 mm Berat mesin kira-kira: 1.600 ton Kebutuhan ruang kira-kira: 1.400 x 1.200 x 1.500 mm Kecepatan pemotongan terkecil/terbesar: 0 - 20 m/menit Kecepatan balik terkecil/terbesar: 40 m/menit Diameter benda kerja terbesar sesuai dengan DIN6885 (lubang): 230 mm Isdpfoznbrhjx Apaotk

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working surface: 610 x 470 mm / 520 x 320 mm Table bore: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height to floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional changes/optimisations made to the original machine: - External stroke adjustment - New cross-machine, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety guard door with monitoring (integrated in the emergency stop circuit) - Machine enclosure below the guard door, with chip guard and tool storage area - Electrical probe for clamping jaws (tool removal check to prevent unintentional retraction of the pull bridge) - Coolant swivel system with switching solenoid valve during the swivel process (enables coolant to be switched on before broaching stroke is initiated » visual check of lubricant flow—no dry cut!) - Routing of electrical cables in steel protective conduits - Heavy-duty control cabinet bracket for machine components - Additional oil-tight tray mounted on the control cabinet - Three-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Operating panel made of stainless steel sheet with durable labeling - Four central lubrication points for the trapezoidal spindle drive Remarks: The machine has been completely overhauled; the machine body is fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system (pump, solenoid valve, drain valve), including the coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All covers and enclosures are new - The following components have been overhauled and reused: -- Machine base -- Machine stand -- Machine table with table insert -- Pull bridge (clamping jaws are new) -- Gear wheels -- Electric motor (new brake, new bearings) Ijdpsw Ighiefx Apastk The machine is in stock at our warehouse and can be inspected under power. The images attached are original photos of the machine. The machine is CE certified. The CE certificate corresponds to the 1998 standard (first overhaul).

Kondisi: bekas, Merek dan Model: URPE M200 Itjdpjzq R Tgofx Apajk

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1968, nomor mesin/kendaraan: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled mechanical vertical broaching machine Rausch RS 6G, unused, with “CE” marking Pulling force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Itsdpfx Asv Rmvzjpaok Max. tool length: 1200 mm Table size / work area: 610x470 mm / 520x320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unrestricted Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height to floor without superstructures) Motor power: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic locking and safety interlock - New chip chute with tool parking facility - Protective covering for stroke adjustment - Oil-tight shelf on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the pull bridge; extra safety for operator & tool) - Integrated coolant system with electrically actuated solenoid valve and drain tap - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length setting system (reproducible across machines) - Stainless steel control panel with durable labeling - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Remarks: The machine is completely overhauled. During the overhaul, the machine base, machine body, and table have been completely refurbished. All wear parts have been replaced. The machine is upgraded to the state-of-the-art and complies with current “CE” regulations. It is supplied with a “CE” certificate. General: The double spindle drive provides smooth operation and a central pull point as well as a constant broaching speed (selectable broaching speed: 3 m/min or 6 m/min). The design enables quick and easy setup for keyway broaching using flat broaching tools. Thanks to the universally designed pull bridge and machine table, profile and flat broaching tools can be used without the need for additional broach holders. Matching broaching tools and mandrels for this machine are available on request.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of Manufacture: approx. 1960 Type: Horizontal Broaching Machine Iedor A Hdgepfx Apastk Model: RH 10-50 Machine No.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with manual, heavy-duty tool feeder Broaching stroke: 1,500 mm Pulling force: 10,000 kg (100 kN) Mount in pull bridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Workpiece diameter: max. approx. 750 mm (limited by the tool tray of the feeder) Cutting speed: Hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: Hydraulically infinitely variable from 5 m/min to 30 m/min Machine footprint (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant and cutting fluid system • Manually operated tool feed • Broaching slide with pull head mount is guided flat on both sides • Adjustable pull force limitation Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width • Adapter sleeve for pull bridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for the production of keyways with flat broaching tools, as well as for profile broaching. Thanks to the machine bed and robust tool feeder, the machine is well suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is located in our warehouse and can be inspected under power. Currently, the machine has not been technically or visually refurbished, but is ready for immediate use. Pull heads for profile broaching are mostly available upon request, depending on DIN standard, dimension, and stock. Direct contact details for us as well as further information can be found in the attached PDF document.

Kondisi: bekas, Mesin pres hidrolik untuk bengkel, mesin pres untuk membersihkan, mesin pres untuk membuat alur Mesin pres hidrolik buatan sendiri, tipe MaVo 5t-20 Digunakan untuk membersihkan alur pasak pada lubang berongga. Gaya tekan 5 ton (pada tekanan hidrolik 100 bar) Lebar rangka 770 mm Langkah silinder 220 mm Jarak ulir batang piston ke palang meja maksimal 900 mm Kecepatan pres, plunger ke bawah sekitar 11,5 mm/detik = 220 mm dalam 19 detik Kecepatan pres, plunger ke atas sekitar 24,5 mm/detik = 220 mm dalam 9 detik Daya motor 5,5 kW Koneksi jaringan 400 Volt, 50 Hz - Kontrol 2 tangan (satu tombol untuk menghidupkan pompa, 1 tombol untuk gerakan ke bawah, 1 tombol untuk gerakan ke atas) - Pompa hidrolik HAWE, tipe K5/3 (dapat menghasilkan tekanan 400 bar, tetapi pompa menjadi sangat berisik) - Koneksi ulir pada batang piston M42 x 1,5 mm, ulir luar - 1 buah perpanjangan yang dapat dipasang, sekitar 290 mm untuk batang piston dengan M42 x 1,5 mm, ulir dalam - 1 buah perpanjangan yang dapat dipasang, sekitar 250 mm untuk batang piston dengan M42 x 1,5 mm, ulir dalam - 2 buah perpanjangan plunger untuk dipasang pada perpanjangan yang dapat dipasang, panjang 110 dan 130 mm - 2 buah pelat penyangga - Konstruksi baja yang sangat stabil dari profil T ganda 140 - Daya tahan konstruksi baja diperkirakan 40 ton atau lebih - Dapat dipindahkan dengan troli Ukuran ruang yang dibutuhkan P x L x T 1200 x 930 x 2280 mm Itodewki Apjpfx Apaok Berat 485 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, de-hu-001 Itsdpfxoycxlce Apaek

Kondisi: sangat baik (bekas), dalam kondisi kerja yang baik Itodpfowwmr Isx Apaek

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin penekuk Urpe model M-200 G, jumlah pukulan per menit 40-55-75, jarak yang dapat disesuaikan dari meja ke ram 181-525mm, jarak maksimum antara alat dan badan 280mm, luas permukaan meja 666x280mm, jarak pergerakan meja secara longitudinal 435mm, jarak pergerakan meja secara transversal 235mm, kepala mesin dapat dimiringkan, daya motor 1 hp, berat perkiraan 700kg. Itsdpfx Aozmp Ibspajk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Meja pengindeks 400 mm manual Set perkakas termasuk Lubang meja: 10 - 130 mm Lebar alur pasak: 2 - 32 mm Kecepatan umpan: 0,5 - 5 m/menit; Diameter meja Ø: 690 x 460 mm Kapasitas beban meja: 2000 kg Jarak gerak ram: 0 - 425 mm Isdpfxoxclfzo Apastk Panjang: 1300 mm Lebar: 1100 mm Tinggi: 1400 mm Berat: 1800 kg

Tahun pembuatan: 1965, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Tool holder on pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil capacity: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint: (W x D x H) approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding workspace) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke Itedpfxotuuvze Apajk • Integrated coolant/lubricant system • Manually operated tool traverse • The broaching slide with pull head holder is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal pull head for flat shanks up to max. approx. 40 mm width • Dividing attachment (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for manufacturing keyways with flat broaching tools as well as for profile broaching. Due to the rigid machine bed and robust tool feeder, the machine is very well suited for heavy-duty profile broaching tools. Machine is used and in a condition appropriate for its age. The machine is available for inspection at our warehouse. The machine has just been added to our inventory; it has not yet been technically or visually refurbished. Profile broaching pull heads are available on request, depending on DIN standard, size, and stock condition.

Kondisi: baik (bekas), Manufacturer: STANKO Model: 7D430 Year of Manufacture: 1994 Table rotation: 360° Head tilting capability up to 10° Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric | Imperial Table diameter: Ø 630 mm Table load capacity: 1,000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Throat depth: 500 mm Stroke range: 3 - 38 m/min Power: 12 kW Approximate Dimensions Length: 3,000 mm Width: 2,200 mm Height: 3,000 mm Iodpfx Apewpud Aeastk Weight: 6,150 kg Please Note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute any representation or contractual terms. We recommend verifying all critical details.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1966, berat keseluruhan: 7.000 kg, tegangan masuk: 380 V, panjang broaching: 1.500 mm, jumlah posisi broaching: 3, diameter benda kerja (maks.): 575 mm, tinggi total: 5.100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of construction: 1966 Iodpfx Apewql Rvoastk Weight: approx. 6,700 kg Machine No.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 20,000 kg Broaching stroke: 1,500 mm Number of broaching stations: 3 Distance between broaching stations: 2 x 145 mm Chuck diameter for broach heads: 3 x Ø 85 mm Clear width between columns: max. 580 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely adjustable from 7 up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm in height with tool shuttle raised) Power supply / Connection rating: 380 Volt, 50 Hz / 14 kW Accessories / Special features: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-actuated locking in the drawbridge and in the shuttle. The machine features an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal use, ideally a foundation (pit) or alternatively a platform is required. Broach heads and pushers are available on request. The machine can be inspected under power in our warehouse. General information We always have a large selection of around 80 used broaching machines in stock, with pulling forces from 3,000 kg up to 63,000 kg, in both horizontal and vertical configurations. A significant number of the broaching machines in stock are available for live demonstration. If required, we can also offer you used equipment such as broach heads, pushers, broaching tools, and other specific accessories. Our company operates as a contract broaching service provider, and we can also assist you with technical inquiries based on 50 years of experience in broaching technology.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1963, berat keseluruhan: 3.000 kg, panjang total: 3.900 mm, lebar total: 800 mm, tinggi total: 1.850 mm, DETAIL TEKNIS Langkah: 1.500 mm Kapasitas: 10 t Daya motor: 7,5 kW DETAIL MESIN Kontrol: Konvensional Dimensi & Berat Dimensi (P x L x T): 3.900 x 800 x 1.850 mm Berat kosong: 3.000 kg Paket transportasi: 2 PERLENGKAPAN Dokumentasi Isdpfx Ajy Himmspastk

Tahun pembuatan: 1998, jam operasional: 64.082 h, Kondisi: baik (bekas), Ekstruder Cincinnati ini disimpan di gudang mesin Plastima Used Machinery. Mesin ini dibuat pada tahun 1998. Itedpfozu Nnqjx Apaok – Merek: Cincinnati – Model: Titan 45R-APC – Tahun pembuatan: 1998 – Ekstruder sekrup ganda berbentuk kerucut – Diameter sekrup: 45 mm – Total jam kerja: 64.082