Beli Rhino Sawyer Bandsaw Pemotong Tipis Horizontal bekas (14.130)

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO Nlodpfofg E H Sox Aa Uob with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 670 kg Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Electric coolant pump for blade cooling and lubrication Chip removal brush Nsdpfxefg E H To Aa Uslb Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Tools and operating instructions included.

Kondisi: baru, de_001 Njdpeyy A Rfefx Aa Uslb

Kondisi: bekas, Tahun pembuatan: 2000, de-cutting-bandsaw-001 Nlsdpoy D A Ewsfx Aa Ujb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 2115321260 Njdpfx Aaeyw Ti Te Uolb

Kondisi: baik (bekas), Tahun pembuatan: 1985,

Kondisi: baik (bekas), Tahun pembuatan: 1995, Dimensi P-L-T: 3,50/2,40/2,20 mm Nlodpfx Aow N S Ecja Ueb Berat mesin sekitar 3.500 kg Produsen: KASTO, Tipe: HBA 420 AU, Tahun produksi: 1995 Bandsaw horizontal NC otomatis penuh dengan perangkat penjepit hidraulis hingga 400 mm, 1 konveyor serpihan, 1 konveyor serpihan eksternal, 1 meja rol, 1 meja rol, penggerak hidraulis, motor nonaktif, Ukuran (lebar x tinggi x kedalaman): sekitar 400x200x350 cm

Kondisi: bekas, Tahun pembuatan: 1999, de2hu123 Njdpfeyv Nk Djx Aa Uolb

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system Nledpfx Aaed Iipxe Uob

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length: 3375x27x0.9 mm Band speed: 18 - 100 m/min Table height: 940 mm Total power requirement: 1.5 kW Machine weight: approx. 0.65 t Nledpfefgyiajx Aa Ujb Space requirement: approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, semi-automatic hydraulic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Nlsdpfx Aasfgyh Tj Ueb Total power requirement: 1.5/1.8 kW Machine weight approx. 0.42 t Double-mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Kondisi: baru, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Space required: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTION PRICE!!! (20347) Double mitre metal bandsaw with: - Blade speed 25 - 90 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for quick mitre adjustment - Movable quick-release vice - Quick release lever Nlsdpfxjfgyh Rj Aa Usb - Automatic coolant system

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Total connected load: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal band saw featuring: - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table for quick mitre adjustment - Quick-release vice, movable Njdpfxsd Iip Nj Aa Uelb - Quick-action clamping lever - Automatic coolant system

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double-mitre metal band saw, hydraulic semi-automatic, equipped with: Nedpfxsfgyh Se Aa Uelb - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure feed regulator - Blade speed 25 - 90 m/min - Mitre cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy mitre adjustment - Quick-release vice, movable - Quick-action lever - Automatic coolant system

Kondisi: baru, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Nledpfsnq Sanex Aa Usb Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw blade dimensions 3375 x 27 x 0.9 mm Blade speed 18 - 110 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Vice laterally adjustable - Solid, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, en-GB Nsdpod Iipmefx Aa Ujlb

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) Nlodofgyicopfx Aa Usb * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m Nedpfx Aaefg E Hle Uslb SPECIAL OFFER PRICE!!! 2-column double mitre bandsaw K-tech DG 50/33 HA-I • 2-column mitre bandsaw • Robust yet easy to operate • Material height sensor (automatic cut start recognition) • Smooth operation due to inclined cut, feed regulator and cutting pressure regulator • Heavy-duty material inlet roller • Removable chip tray (can be sanitized) • Energy-saving and low-vibration thanks to inclined cut • Ergonomic, safe, and free-standing control panel • Frequency-controlled sawing drive, 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimension drive wheels (520 mm) each • Clear mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Switch saw on 3. Rapid descent to start of material or commence cut immediately for serial cuts 4. Switch off saw band 5. Raise frame slightly above material 6. Open vice

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Njdefd Abaspfx Aa Uelb Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total connected load: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, frequency-controlled hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single unit, ensures extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings Nedpfx Aasfn Ands Uslb • Robust vice and machine frame, heavy-duty cast construction • Large machine base • Integrated tool compartment and chip drawer in machine substructure • Cutting monitoring via ammeter • Adjustable feed regulator for cutting pressure • Infeed roller • Ball bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or cut straight away for series cutting 4. Switch off saw band 5. Raise frame to just above material 6. Open vice

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Nlsdpjfg E Hpefx Aa Uob Blade speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions L x W x H: 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance for cutting special steels. • The welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw frame, vice, feed, saw blade guides) utilize modern linear guides capable of high static and dynamic load capacity, ensuring minimal sliding friction. • Another key feature is the roller system for material positioning, hydraulically driven. These rollers move at a right angle to the material, allowing optimal clamping. • Thanks to adjustable blade height control, the operator can precisely position the band near the top edge of the material. After cutting, the blade automatically returns to its previous position. Alternatively, the ‘remain’ function can be selected to leave the blade at the lower position. During the cutting cycle, the software compares sawing load with preset values to allow the system to stop in case of irregularities. • The saw blade is cleaned by two adjustable steel brushes with hydraulic drive. • The hydraulic unit with filter and pressure gauge ensures particularly smooth operation at a constant pressure. • Precision-ground carbide inserts for saw blade clamping, complete with hardened, adjustable lateral guide rollers. The adjustable blade guide automatically moves as close as possible to the material. • The saw blade is tensioned by a hydraulic cylinder, controlled by machine software. Tension is automatically released after a preset time in idle mode or after a cutting cycle. • Automatic version with CNC control available for X-TECH 900 / 1200 models, with 500 mm feed length for high-production series. • The material is supported by a table with seven rollers. These are driven by a hydraulic orbital motor, ensuring precise placement even at maximum load. • All guided movements run on four recirculating ball guides with high capacity for static and dynamic loads; significantly reduced feed friction. Induction-hardened, ground prismatic guides. Price on request.

Kondisi: baru, Cutting capacity at 90 degrees: round 310 mm Cutting capacity at 90 degrees: square 280 mm Cutting capacity at 90 degrees: rectangle 400x250 mm Saw blade length: 4020x34x1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirements: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Miter left 60° + right 45° • Industrial hydraulics, high performance 18 bar • Optimal material access • Ammeter for monitoring: - Cutting force optimization Nledpfsd Iiptsx Aa Ueb - Blade service life - Cutting precision • Hydraulic vice opens/closes automatically • Swarf removal brush • Material turntable with ball bearings • Quick-release vice, adjustable • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw blade 3. Fast downfeed to material or for series cuts, start cutting directly 4. Stop saw blade 5. Raise saw frame just above material 6. Release vice

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 / 1.3 kW Nljded Iip Rjpfx Aa Ujb Machine weight: approx. 0.35 t Space required: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy mitre adjustment - Quick-release, movable vice - Quick-release lever - Automatic coolant system Shipping cost share: €120

Kondisi: bekas, Tahun pembuatan: 2006, Schnittdurchmesser 440 mm Nsdpfxey Aa H Aj Aa Uolb

Kondisi: baru, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirements: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-clamping device -Saw blade guide made of carbide -Blade tension control -Electrical coolant system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder Nledsd Iip Tepfx Aa Uob -Steplessly adjustable feed -With end switch -Quick descent of the saw frame from rest position to workpiece, then switches to normal cutting feed -Manual operation