Beli Durchmesser 1380 Mm Höhe 75 Mm bekas (83.954)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm Iijdpfx Asmhh Anja Dsd - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. Iiodpfoh Ek Daox Aa Dod According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Ijdpsmhhf Sefx Aa Doid - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) Ijdpfx Aasmhhl He Djid With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Iiodpomidyfsfx Aa Dod Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Iijdpfxsmkixwj Aa Dsd - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) Iedomhh Dtopfx Aa Djid - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: bekas, Steady rest Isdpfjcrcxpjx Aa Djid Height without base: 350 mm Diameter: 140 mm Base width: 40 mm

Kondisi: baik (bekas), Faceplate Iiodpfsfm Truox Aa Dod Diameter: 405 mm Height: 100 mm Bolt circle diameter: 84 mm Weight: 55 kg

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), Faceplate diameter 360 mm internal diameter 115 mm estimated age Ijdpfx Aofat Uxja Djid

Kondisi: sangat baik (bekas), Faceplate Isdpfx Aaofm Tqdo Deid Diameter: 540 mm Height: 125 mm Centring flange diameter: 120 mm Thread pitch: 6 mm Thread: M 120 x 6 Weight: 115 kg

Kondisi: baik (bekas), Ekor, penyangga lawan untuk kepala pembagi, perangkat pembagi, ekor untuk mesin gerinda alat, mesin gerinda silindris Isdpfxoxfhq Ej Aa Doid - Ekor: tinggi pusat dapat diatur/diputar 83-175 mm - Tipe: 36642.M31 - Ukuran: lihat foto - Dimensi: 280/220/T270 mm - Berat: 12,1 kg

Kondisi: baik (bekas), Lynette Centre height 330 mm Diameter 185 mm Base length 330 mm Base width 140 mm Iiedpfx Aasd S Algj Dsd Total width 600 mm Total height 650 mm

Kondisi: siap digunakan (bekas), Fanuc 0550544 reduction gearbox for Robot R-2000iA 125L – Diameter: 275 mm, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Iedpfjr Nqryjx Aa Deid

Kondisi: baik (bekas), Note: The collision protection guard rails may show scratches, minor dents, or other signs of damage. Scope of delivery includes: 01x collision protection guard rail, used Material color: yellow/black Design: solid-wall Total length: approx. 1,380 mm Clear width: approx. 1,205 mm Total depth: approx. 205 mm Overall height: approx. 350 mm Material thickness: approx. 5.00 mm Number of mounting holes: 04 pcs. Mounting hole diameter: approx. 18 mm Weight per unit: approx. 33.820 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Ijdpfjnwnmyex Aa Deid This item is offered for collection only. Should you require transport or shipping for this item, this will incur additional costs, which can be quoted separately depending on the delivery location and scope of delivery.

Kondisi: baik (bekas), Note: The collision protection guardrails may exhibit scratches, minor dents or other damage. Iiodpfxjnwmn Hs Aa Dsd Scope of delivery includes: 01x collision protection guardrail, used Material color: yellow/black Design: solid wall Total length: approx. 2,700 mm Clear width: approx. 2,505 mm Total depth: approx. 240 mm Total height: approx. 410 mm Material thickness: approx. 4.00 mm Number of boreholes: 08 pcs Borehole Ø: approx. 18 mm Weight | per piece: approx. 52.840 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipping of this item is required, additional costs will apply. These can be individually requested from us, depending on the place of delivery or scope of delivery.

Kondisi: sangat baik (bekas), Your contacts in our company: Mr: Andre Evering Ijdpfsh Hf Rmjx Aa Doid Mr: Mario Klöver Mr: Falk Deutsch Scope of delivery includes: 01x Railing post, used Material color: blue Total height: approx. 1,110 mm Total width: approx. 110 mm Total depth: approx. 62 mm Base plate: approx. 120 x 110 x 12 mm (W x D x H) Round tube opening diameter: approx. 48 mm Center-to-center hole spacing: approx. 465 mm Material thickness: approx. 2 mm Weight per piece: approx. 5.07 kg Notes: - The railing post is open at the top (viewed from above). - The heights of the round tube openings are: 565 mm and 1,030 mm (measured from the bottom edge of the base plate to the bottom edge of the round tube opening) - Suitable for round tubes with a diameter of 45 mm General information about the item: This item is offered for collection only. Any transport or shipping of this item beyond collection will incur additional costs, which can be requested from us depending on delivery location and scope. Our services at a glance: (Prices on request) Assembly, installation Our general assembly terms and conditions apply. Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 visual inspection for all rack systems. Delivery with our own fleet (without unloading)

Kondisi: baik (bekas), The scope of delivery includes: 01x Roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile dimensions: C 80 x 35 x 12 mm Cross-brace dimensions: approx. 380 x 60 x 50 mm Mounting plate dimensions: approx. 140 x 135 x 3.00 mm Drill hole Ø: approx. 9 mm Drill hole spacing: approx. 100 mm Frame profile wall thickness: approx. 2.50 mm Iijdpfxoilg Evs Aa Djd Material finish: Sendzimir galvanized

Kondisi: baik (bekas), The scope of delivery includes: 01x Roller conveyor stand, used Total width with base plates: 275 mm Frame width: approx. 245 mm Minimum height: approx. 660 mm Maximum height: approx. 900 mm Overall depth with base plates: approx. 160 mm Frame profile dimensions: C 80 x 35 x 12 mm Cross brace dimensions: approx. 180 x 60 x 50 mm Mounting plate dimensions: approx. 140 x 220 x 3.00 mm Drill hole diameter: approx. 9 mm Hole spacing: approx. 100 mm Iijdpfx Aasilg E Ie Ded Frame profile material thickness: approx. 2.50 mm Material finish: sendzimir galvanized

Kondisi: baik (bekas), Technical data for pallet rack uprights: Racking system: Stow Type: Pal Rack NS Included in delivery: 01x Pallet rack upright, used Colour: RAL5015 Sky Blue Upright type: PNFB 12 Profile dimensions: 85 x 65 x 1.75 mm Ijdpov Idkdsfx Aa Doid Including horizontal and diagonal braces, foot plates The uprights are pre-assembled (bolted lattice structure) Frame height: 1,750 mm Frame depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply, which can be requested from us depending on delivery location and scope.

Kondisi: baik (bekas), Note: The impact protection guardrails may show scratches, minor dents, or other damages. The scope of delivery includes: 01x Impact protection guardrail, used Material color: yellow/black Design: solid wall Square tube: 2 pcs Square tube dimensions: 80 x 80 x 3.00 mm Total length: approx. 2,690 mm Clear width: approx. 2,500 mm Total depth: approx. 235 mm Total height: approx. 405 mm Material thickness: approx. 4.00 mm Number of mounting holes: 4 pcs. Hole diameter: approx. 20 mm Weight | per unit: approx. 54.820 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Ijdonwmuwspfx Aa Djid General information about the item: This item is only offered for collection. Transport or shipping of this item is possible at additional cost, which can be quoted separately based on delivery location and scope.

Kondisi: sangat baik (bekas), Technical data for the order picking rack: Racking system: Dexion Type: HI280 Installation technical data: Number of racking rows: 01 unit Rack length: approx. 1,340 mm Number of bays per row: 01 unit, each 1,290 mm Number of levels incl. ground level: 06 units Note: The advantage of a packing table or an order picking rack is that all the necessary tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. cross and diagonal braces Weight per piece: approx. 5.50 kg The frames are pre-assembled 1,200 mm high 610 mm deep 06x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x Levelling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x Shelf beams, used Total length: 1,275 mm Iodpon Smvhofx Aa Djid Z-profile: 50 x 25 mm Number of hooks: 02 units Weight per piece: approx. 0.84 kg Material finish: Sendzimir galvanized 48x Open front storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions (LxWxH): 500 x 156 x 143 mm Internal dimensions (LxW): 448 x 123 mm Weight per piece: approx. 0.785 kg 01x Load sign showing bay and shelf load capacities, manufacturer and order number Dimensions: 297 x 210 x 2 mm Note: As these are used goods, damages, rust spots or similar defects may be present. General information about the item: This item is offered for collection only. Additional transport or shipping of this item can be arranged at extra cost, which can be quoted separately depending on delivery location and scope.

Kondisi: baru, Circular saw blade diameter 300 mm Iijdpfxemxi T As Aa Ded bore 40 mm thickness 3 mm number of teeth 180 bolt circle diameter (drive holes) 63 mm drive hole diameter 11 mm HSS unused, from warehouse clearance stock number 28418

Kondisi: baik (bekas), Engsel, engsel pintu, engsel lipat, engsel baja, engsel dinding samping, engsel aluminium, engsel colok, engsel bendera -Engsel: Engsel aluminium, engsel colok -Tipe: 2 bagian, tinggi 80 mm, lihat foto No.: 10002174 Iiedezk D Udepfx Aa Dod -Jumlah: 128 engsel tersedia -Harga: per buah, pembelian minimum 2 buah -Dimensi saat dilipat: 80/80/T43 mm -Berat: 0,2 kg/buah

Kondisi: bekas, Krauss Maffei unit pengganti, tinggi 410 mm - tinggi 410 mm - diambil dari Krauss Maffei KM 200 - dilepas dari mesin yang sedang beroperasi - berfungsi penuh Produsen: Krauss Maffei Isdjrr Efnspfx Aa Doid Kondisi: bekas