Beli K25 Kayu Bakar Panas Generator Udara bekas (29.925)

Kondisi: bekas, KAESER Screw Compressor, Model BS 50 Serial No. 402852 Year of manufacture: 1990 Free Air Delivery: 5 m³/min Working Pressure: 7.5 bar Main Motor Power: 30 kW Power Supply: 400 Volt, 50 Hz Connection Thread: 1 1/2" inch - 1,107.90 operating hours (read) - 749.00 load hours (read) - Sound-insulated Dimensions (L x W x H): 1,600 x 1,070 x 1,350 mm Dwjdpfoiyu Ifjx Aatsb Weight: 900 kg Very good condition Was used as a backup compressor and has very few operating hours

Kondisi: bekas, Rittal air/water heat exchanger for cooling control cabinets and automation technology. Produsen: Rittal Seri: TopTherm Tipe: SK 3210100 Jenis perangkat: Penukar panas udara/air Kondisi: Bekas Tegangan suplai: 230 V AC Frekuensi: 50/60 Hz Fase: 1~ Arus nominal: 0,44 A pada 50 Hz Arus nominal: 0,50 A pada 60 Hz Daya terpakai: 0,100 kW pada 50 Hz Daya terpakai: 0,120 kW pada 60 Hz Kapasitas pendinginan berguna: 4,00 kW Titik ukur kapasitas pendinginan: L35 / W10 Aliran media pendingin: 400 l/jam Rentang suhu operasi: 1 °C hingga 70 °C Dwjdezdafmjpfx Aatsb Media pendingin: Air Temperatur maksimum media pendingin: 30 °C Tekanan operasi: 0,1 hingga 1,0 MPa Tekanan operasi: 14,5 hingga 145 psi Derajat perlindungan: IP55 Berat: 25,5 kg Lokasi: Kusel

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm Dedpfx Aevz Hq Hsatewb - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Tahun pembuatan: 1999, jam operasional: 76.000 h, Kondisi: bekas, Fungsionalitas: belum diuji, Parameter teknis: • Produsen: AUSTRIAN ENERGY Dedpey D Hy Ejfx Aatswb • Tipe: Boiler drum tekanan ganda (1999) • Aliran uap HP: 40,8 t/jam • Aliran uap LP: 17,3 t/jam • Parameter uap HP: 52 bar / 425 °C • Parameter uap LP: 4,2 bar / 180 °C • Suhu gas buang di outlet HRSG: 80 °C • Aliran gas buang ke cerobong: 468 t/jam (482 k Nm3/jam) • Panas yang diperoleh siklus uap dan air dari gas buang di HRSG: 45,9 MWt • Output maksimum penukar panas DH: 8,0 MWt • Jam operasi: 76.000 jam Bagian tekanan tinggi dan rendah serta drum (HP dan LP) terdiri dari 6 modul independen yang dapat diangkut. Isolasi dinding boiler sebagian dan perlu diganti.

Kondisi: baru, Tahun pembuatan: 2023, Newpower Generator dengan bangga mempersembahkan genset darurat NWC77 terbaru mereka dengan mesin Cummins. Genset ini baru, lengkap termasuk kontrol, tangki bahan bakar diesel, knalpot, aki, regulator kecepatan elektrik, AVR, pengisi daya aki, pemanas air pendingin, turbocharger, stop kontak, sakelar pemutus sirkuit dengan perlindungan arus sisa (FI). Data Teknis: Model: Genset darurat NWC77 dengan peredam suara Genset Newpower dengan mesin Cummins Mesin: Cummins 4BTA3.9-G11, 4 silinder Berpendingin air dan dilengkapi pendingin udara Generator: Newpower NW/N55 Daya berkelanjutan: 56 kW / 70 kVA Daya maksimum: 61 kW / 77 kVA Koneksi: Sakelar pemutus sirkuit 4P, kabel 5 inti Stop kontak: 1x5P 63A, 1x5P 32A, 1x5P 16A, 2x2P 16A (stop kontak Schuko) Frekuensi: 50 Hz Tegangan: 400/230 V RPM: 1500 U/menit Kontrol: Comap IL4 AMF8 Tahun pembuatan: 2023 (baru) Dimensi (P x L x T): 2400x1000x1500 mm Berat: 1232 kg Tangki bahan bakar diesel: 135 L Beban 100%: sekitar 17,6 l/jam Beban 75%: sekitar 13,2 l/jam Beban 50%: sekitar 9,1 l/jam Biaya tambahan Sakelar transfer otomatis 100A € 620 Sakelar transfer otomatis 250A € 1080 Pengiriman: Dwedpsnkb Ugsfx Aatsb - Pengiriman ke seluruh dunia termasuk pembongkaran dapat dilakukan dengan biaya tambahan - Untuk memberikan harga pengiriman yang tepat, kirimkan permintaan kepada kami dengan data dan alamat lengkap Anda Garansi Garansi genset di seluruh wilayah Jerman berlaku selama 12 bulan atau 1000 jam operasi sejak penyerahan (mana yang tercapai lebih dulu). Dengan syarat Anda menggunakan layanan perawatan Newpower sesuai dengan interval perawatan. Pengecualian meliputi kesalahan pengguna, di bawah garansi Newpower internasional.

Kondisi: bekas, FlowCook sepenuhnya terbuat dari baja tahan karat cocok untuk pemanasan dengan oli termo (300 kW) panjang sabuk ±13.000 mm lebar sabuk ±600 mm sabuk keluaran sistem pencucian sabuk alat pengangkat elektrik untuk penutup Dsdpezvbzfefx Aatewb tekanan uap: 4–8 bar dimensi keseluruhan (P x L x T): ±15.000 x 2.200 x 3.000 mm

Kondisi: bekas, -12 lubang -4 tingkat -Elevator penyuap terintegrasi -Bekerja dengan Kayu dan Gas -Dijual dengan Burner Gas Dwsdpfxsx Up Nwo Aatjb -Dengan kontrol mekanis -Tegangan: 400V

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. Dodjvz Hq Tspfx Aatewb These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang total: 1.100 mm, lebar total: 865 mm, tinggi total: 1.800 mm, Tersertifikasi DGUV hingga: 07/2027, Ladenbackofen_Unox_Bakertop_6 Dodpfeygc Ucox Aatjwb

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. Dsdpfxsvz Hhxo Aatjwb The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Kondisi: sangat baik (bekas), Binder Model: Binder CB 210 CO₂ / 9140-0013 Dwodpfx Aaozgbtcotjb Technical Data Temperature range: 7 °C above ambient temperature up to 60 °C MB1 controller for temperature and CO₂ concentration Internal volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications excepted!) If you have any further questions, we will be happy to assist you by phone.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Dwsdpfx Ajvz Hqyeateb Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 Dedpevz Hqgjfx Aatjwb The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h Dedpfx Aaevz Hqmetswb - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar Dwodpfx Aaovz Hqtjtjb - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: sangat baik (bekas), Heraeus Drying Oven Hot Air Sterilizer We offer a Heraeus drying oven hot air sterilizer for sale. Manufacturer / Model: Heraeus SUT 6060 Specifications: Temperature range: up to 250 °C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 339 mm, Width 403 mm, Height 380 mm External dimensions: Depth 535 mm, Width 744 mm, Height 552 mm Dwedszdti Dopfx Aateb Rated voltage: 230V, Rated frequency: 50/60Hz, Rated current: 7.1 A, Rated power: 1.64 kW Model: SUT 6060 Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) If you have any further questions, we are happy to assist you by phone.

Kondisi: baik (bekas), Included in delivery: Dodpfedvgxiex Aatjwb 02x Upright frames, used Material color: Sendzimir galvanized Frame profile: 85 x 75 x 2.00 mm Frame height: 1,455 / 1,300 mm Frame depth: 1,100 mm 04x Crossbeams, used Material color: orange Box profile: 120 x 50 mm Clear span: 2,700 mm 08x Safety pins, used Design: fully galvanized 03x Wire mesh shelves, new Material color: Sendzimir galvanized Design: drop-on shelf grates, edge-bent on both sides Depth (bar direction): approx. 1,125 mm for frame depth: approx. 1,100 mm Clear width: approx. 965 mm Width: approx. 885 mm Beam bearing surface: approx. 65 mm Mesh size: approx. 95 x 45 mm Wire thickness: approx. 4.5 mm Maximum load capacity up to 800 kg with evenly distributed load 03x Trapezoidal sheets, 2nd choice External color: RAL 8012 red brown Internal color: similar to grey-white Panel length: 1,500 mm Panel width: 1,075 mm Effective width: 1,035 mm Profile: 35 / 207 01x Verge angle, new Length: 3,000 mm Material color: RAL 8012 red brown Size: 100 x 100 mm Thickness: 0.75 mm Design: 90° edged 25x Screws 5.5 x 40 mm A2 Max. drilling performance: 13 mm with 16 mm sealing washer, drill tip, and approval ETA-13/0183 06x Screws, 4.8 x 20 mm Galvanized, self-tapping for timber substructure Technical Data for Firewood Shelter: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: Sample images are used for illustration purposes only to show the construction. The actual color of the uprights and beams may differ from those shown. General information regarding the item: This item is available for collection only. Transport or shipping can be arranged at additional costs, which depend on the place of delivery and/or delivery scope and can be clarified with us in advance.

Kondisi: bekas, Tahun pembuatan: 1998, Pabrikan: CFS Model: HLT10000/1000 Tahun: 1998 Kondisi: Bekas Nomor seri: 230 Nomor stok: 3372B Lebar sabuk: 1000 mm Panjang penggorengan: 9000 mm Pemanas: minyak termal, 360 kW Uap: 4 - 8 Bar Udara tekan: 2 - 4 Bar Daya listrik: 3 x 400V, 50Hz, 30kW Dimensi: 12600 x 2100 x 3400 mm Berat: 10000 kg Djdpsy R S Hqofx Aatewb

Kondisi: bekas, Stainless steel heat exchanger AGETHERMA type FT-1.1-910/230/10-RS04-T10-ATWH Air-water, air-oil heat exchanger Serial no. WT08-1065P-2 Year built: 2008 Completely made of stainless steel (presumably 1.4571) Gas/air flow-through 900 x 230 mm Connection flange external 1000 x 310 mm Dwsdpey Dvguefx Aatsb Max. permissible pressure: 10 bar Max. permissible temperature: 300°C Volume: 27 liters Test pressure: 17.9 bar Net weight: 325 kg Manufacturer’s inspection date Flange size Ø DN25 DIN 2635 PN 40 (2 units) - Tubes made of stainless steel with aluminum fins for improved heat transfer Optional accessories available – supplied for an extra charge: 3 units of heat exchanger with identical specifications and 27-liter capacity (each weighing 325 kg) 1 unit of heat exchanger with identical specifications and 17-liter capacity (weight 200 kg) 2x 90° elbows with flange connection, made of stainless steel 2x adapters from rectangular flange to round pipe Ø 210 mm, made of stainless steel Price per heat exchanger All four heat exchangers can be seen together as one unit on a pallet in the photos. Total weight of all parts approx. 1,400 kg Sale of all heat exchangers as a package: EUR 4,000

Kondisi: bekas, KAESER Piston Compressor Type EPC 630-250 Dwedpfjwypqrsx Aatjb Serial No. 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 l/min Intake capacity max.: 630 l/min Pressure output: 10 bar Receiver capacity: 250 liters Motor power: 3 kW Power supply: 400 V, 50 Hz (with 16 A plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to cut-off pressure (10 bar): 5 min Footprint (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Kondisi: baru, Tahun pembuatan: 2023, Newpower Generator dengan bangga mempersembahkan generator darurat NWC165 terbaru dengan peredam suara. Generator ini baru, lengkap termasuk kontrol, tangki bahan bakar diesel, knalpot, aki, regulator kecepatan elektrik, AVR, pengisi daya aki, pemanas air pendingin, turbocharger, stop kontak, pemutus arus dengan perlindungan arus sisa (FI). Deskripsi Model: NWC165, Mesin Cummins, Generator Newpower Djdpfx Aasnkb Uyetewb Daya berkelanjutan: 120kW / 150 kVA Daya maksimum: 132kW / 165 kVA Mesin: Cummins 6BTAA5.9-G2, 6 silinder, berpendingin air, turbocharger Koneksi: Pemutus arus – perlindungan arus sisa (FI), koneksi 5 kabel Stop kontak: 1* 400V 5Px125A, 2* 400V 5PX63A, 2* 220V 2PX16A Frekuensi: 50 Hz, Tegangan: 400/230 V Termasuk: pengaturan kecepatan elektronik, AVR, pengisi daya aki, peredam suara berlapis seng, pemanas air pendingin Unit kontrol: Comap AMF8, penyambungan ke jaringan listrik Dimensi: 3050*1120*1670mm, Berat: 2043kg Tangki bahan bakar diesel: 275 L Pada beban 100%: 30 L/jam Pada beban 75%: 23 L/jam Pada beban 50%: 16 L/jam Pemantauan jaringan, penyambungan ke jaringan listrik Terdiamkan, siap digunakan. Biaya tambahan Sakelar transfer otomatis 250A: 1080 € Sakelar transfer otomatis 400A: 1620 € Pengiriman: - Transportasi ke seluruh dunia termasuk bongkar muat dapat dilakukan dengan biaya tambahan - Untuk memberikan harga pengiriman yang akurat, kirimkan permintaan dengan data dan alamat lengkap Anda.

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2026, Fungsionalitas: berfungsi sepenuhnya, unox-bakertop-x10-hu Dsdpjyaf Dmofx Aatewb

Tahun pembuatan: 2023, Kondisi: baru, Newpower Generator dengan bangga mempersembahkan genset darurat NWC77 terbaru mereka dengan mesin Cummins. Genset ini baru, lengkap termasuk kontrol, tangki bahan bakar diesel, knalpot, aki, regulator kecepatan elektrik, AVR, pengisi daya aki, pemanas air pendingin, turbocharger, stop kontak, sakelar pemutus sirkuit dengan perlindungan arus sisa (FI). Data Teknis: Model: Genset darurat NWC77 dengan peredam suara Genset Newpower dengan mesin Cummins Mesin: Cummins 4BTA3.9-G11, 4 silinder Berpendingin air dan dilengkapi pendingin udara Generator: Newpower NW/N55 Daya berkelanjutan: 56 kW / 70 kVA Daya maksimum: 61 kW / 77 kVA Koneksi: Sakelar pemutus sirkuit 4P, kabel 5 inti Stop kontak: 1x5P 63A, 1x5P 32A, 1x5P 16A, 2x2P 16A (stop kontak Schuko) Frekuensi: 50 Hz Tegangan: 400/230 V RPM: 1500 U/menit Kontrol: Comap IL4 AMF8 Tahun pembuatan: 2023 (baru) Dimensi (P x L x T): 2400x1000x1500 mm Berat: 1232 kg Tangki bahan bakar diesel: 135 L Beban 100%: sekitar 17,6 l/jam Beban 75%: sekitar 13,2 l/jam Beban 50%: sekitar 9,1 l/jam Biaya tambahan Dsdpfx Aonnx A Djatewb Sakelar transfer otomatis 100A € 620 Sakelar transfer otomatis 250A € 1080 Pengiriman: - Pengiriman ke seluruh dunia termasuk pembongkaran dapat dilakukan dengan biaya tambahan - Untuk memberikan harga pengiriman yang tepat, kirimkan permintaan kepada kami dengan data dan alamat lengkap Anda Garansi Garansi genset di seluruh wilayah Jerman berlaku selama 12 bulan atau 1000 jam operasi sejak penyerahan (mana yang tercapai lebih dulu). Dengan syarat Anda menggunakan layanan perawatan Newpower sesuai dengan interval perawatan. Pengecualian meliputi kesalahan pengguna, di bawah garansi Newpower internasional.

Kondisi: baru, Tahun pembuatan: 2023, Newpower Generator dengan bangga mempersembahkan genset darurat NWC77 terbaru mereka dengan mesin Cummins. Genset ini baru, lengkap termasuk kontrol, tangki bahan bakar diesel, knalpot, aki, regulator kecepatan elektrik, AVR, pengisi daya aki, pemanas air pendingin, turbocharger, stop kontak, sakelar pemutus sirkuit dengan perlindungan arus sisa (FI). Data Teknis: Model: Genset darurat NWC77 dengan peredam suara Genset Newpower dengan mesin Cummins Mesin: Cummins 4BTA3.9-G11, 4 silinder Berpendingin air dan dilengkapi pendingin udara Generator: Newpower NW/N55 Daya berkelanjutan: 56 kW / 70 kVA Daya maksimum: 61 kW / 77 kVA Koneksi: Sakelar pemutus sirkuit 4P, kabel 5 inti Stop kontak: 1x5P 63A, 1x5P 32A, 1x5P 16A, 2x2P 16A (stop kontak Schuko) Frekuensi: 50 Hz Tegangan: 400/230 V RPM: 1500 U/menit Kontrol: Comap IL4 AMF8 Tahun pembuatan: 2023 (baru) Dimensi (P x L x T): 2400x1000x1500 mm Berat: 1232 kg Tangki bahan bakar diesel: 135 L Beban 100%: sekitar 17,6 l/jam Beban 75%: sekitar 13,2 l/jam Beban 50%: sekitar 9,1 l/jam Biaya tambahan Sakelar transfer otomatis 100A € 620 Sakelar transfer otomatis 250A € 1080 Pengiriman: - Pengiriman ke seluruh dunia termasuk pembongkaran dapat dilakukan dengan biaya tambahan Dwjdpjncd Rasfx Aateb - Untuk memberikan harga pengiriman yang tepat, kirimkan permintaan kepada kami dengan data dan alamat lengkap Anda Garansi Garansi genset di seluruh wilayah Jerman berlaku selama 12 bulan atau 1000 jam operasi sejak penyerahan (mana yang tercapai lebih dulu). Dengan syarat Anda menggunakan layanan perawatan Newpower sesuai dengan interval perawatan. Pengecualian meliputi kesalahan pengguna, di bawah garansi Newpower internasional.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, frekuensi input: 50 Hz, jenis arus masuk: AC (pendingin udara), Tersertifikasi DGUV hingga: 07/2027, Ladenbackofen_Unox_Bakerlux_Stefania_001 Dsdpfxsyaf D Ho Aatowb