Beli Kantilever Kantilever bekas (96)

Kondisi: baru, Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new: Price ex works, including loading! Iijdpfx Aonwmwvolcsb Price: €1,480 (net) Price for transport / packaging within Germany (excluding islands): €400 (net) You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new equipment Description: - Frame, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 800 mm - Each frame fitted with 3 height-adjustable arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 750 kg = 3,000 kg Profiles: frames (uprights): IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing Standard bay spacing between frames is 1.30m. Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m. For bay length from 1.50m and above, a small surcharge applies to the listed price. Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time. If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors. Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at extra charge), see attached photos: - Base section with impact protector - Base section with large impact protector - Base section with wheel guard - Cantilever arm with impact protector - Plug-in roll-off protection for cantilever arm - Clamp-on roll-off protection - Grating shelves - Conversion for pallet storage use Photos are for reference only and show typical single-sided rack examples and material used.

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New stock - : Price ex works including loading! 1 racking unit with 4 uprights: €4,115 (net)! Iisdpsfivg Rsfx Alceb Transport costs within Germany (excluding islands): €490 (net)! You can also create longer or shorter racking units by omitting or purchasing additional uprights (or by adjusting the spacing between the uprights). The example with 4 uprights represents the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided racking uprights, approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm with three height-adjustable arms per upright - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 500 kg = 2,000 kg - Profiles: Uprights: IPE220, Arms: IPE 80 - With longitudinal and diagonal braces, center-to-center distance = 1,300 mm. Standard measurement is 1.30m. - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m length, there is a small surcharge on the stated price! - Custom dimensions (other center-to-center distances) available on request, subject to surcharge and longer delivery times due to special fabrication! - Unless otherwise specified, we supply the racking with a center distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baru, Tahun pembuatan: 2025, Cantilever racking for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – New equipment: Price ex works incl. loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport price on request! Manufacturer: Bruckamp Year of manufacture: New equipment Model: Super Light Iijdpfx Ajxbz Ddjlceb Set components: 4 uprights with 5 arms each / 3 bays with connectors Upright spacing: approx. 1m Total assembled length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – made from IPE 100 profile steel with fixed welded arms, spaced approx. 330mm apart. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Incl. floor anchors Incl. load rating plate Description: 4 uprights with 1m pitch as a set including all bolts. Key advantages: Easy assembly – the rack is designed for quick and straightforward installation. Versatile – ideal for garages, workshops, or small alcoves, the rack adjusts flexibly to the space. Safe & practical – the rectangular tube arms are fitted with plastic end caps to prevent injuries.

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm Iedefivhfepfx Alcoib - With bracing approx. 1.30m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2020, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW –: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport cost within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the bay width); the example with 4 frames is simply the most common rack configuration! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2x3 adjustable arms, length 1.20 m, load capacity 750kg per arm - With bracing approx. 1.30 m - Rack uprights double-sided, approx. 3500mm high, hot-dip galvanized - Base and arm depth 1200 mm, each upright with 3 height-adjustable arms - Load capacity with a load center of 600 mm: 750 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a width of 1.50m a small surcharge applies to the above price! Isdpfx Aljfivhgjcoib Special sizes (other bay widths) are also available on request, but incur an additional charge and longer delivery time, as they must be custom manufactured! If you do not specify otherwise, the racking will be supplied with a bay width of 1.30m. With a racking row of 4 uprights (3 bays), the length is approx. 4m. Supplied with all bolts and nuts (delivery within Germany via parcel from Würth), floor anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Single-sided cantilever rack, 3m height, 1.20m arms, 500kg per arm – New –: Price ex location, incl. loading! 1 racking unit with 4 uprights: €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, by omitting or purchasing additional frames, you can also configure longer or shorter racking units (or by adjusting the bay spacing); this example with 4 frames is simply the most common racking solution!! A hot-dip galvanized cantilever rack system, consisting of: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Iisdpfx Aljddmpvscob Base and arm depth 1,200 mm with 3 adjustable cantilever arms each Load capacity with load center at 600mm: 500 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 500kg = 2,000 kg, arms made of IPE 80, With longitudinal and diagonal bracings, axle spacing = 1,300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay spacings) are also available on request, subject to surcharge and with longer delivery times as these need to be custom-made! If you do not specify other bay spacings, we will deliver the racking unit with a bay spacing of 1.30m. In this case, the length of a single row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany as parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us!

Kondisi: sangat baik (bekas), Rak cantilever, dua sisi, 10 tingkat, lengan dengan overhang 380 mm, dapat diperpanjang 220 mm, tinggi 2420 mm, kedalaman total 1000 mm, panjang sekitar 2700 mm, lengan cantilever dari baja-U 80 mm, konstruksi sangat kokoh, rak dilapisi galvanis panas, berat 1190 kg, rak dibongkar untuk transportasi. Isdpfew Icyuex Alcsib

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 725 kg, kapasitas angkut: 8.700 kg, tinggi rak: 8.700 mm, panjang total: 4.700 mm, lebar total: 2.600 mm, tinggi total: 8.700 mm, jarak gandar: 1.500 mm, kedalaman tenggorokan: 1.200 mm, kapasitas muatan per bagian penyimpanan: 2.900 kg, Perlengkapan: dua sisi, Rak cantilever dalam kondisi baik Iiodpsw Uf Emsfx Alcob

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), Used and new cantilever racks and pallet heavy-duty racks are offered. We are happy to prepare a customized quotation for you. Please provide us with the following information: - Length and height of the desired rack, - Number of storage levels, - Load capacity per level. If you have any questions, we are at your disposal. Iedpfxshr D Dts Alcjib Images are sample photos.

Kondisi: sangat baik (bekas), Height: approx. 2000-4500 mm Width: approx. 1130 mm Usable depth: 1 x 1000 mm Frame load capacity: up to 3000 kg Arm load capacity: up to 500 kg 6 storage levels including base level Single-sided design Bolted foot profiles Made from hot-rolled IPE sections Finish: high-quality industrial paint RAL 5010 Arms freely adjustable in 100 mm increments Rack frame: foot and arms bolted Increase storage capacity with reduced footprint Orderly storage of long goods Ijdpfx Aljp Dukqjcjib Price: €400 net per upright incl. We assemble your custom rack. Contact us! We also purchase racking. Please send pictures and dimensions; we will make you an offer. Contact Brennholz Blum - Mr. Dominik Blum Delivery of your rack available on request. If you have any questions, simply call or write.

Kondisi: bekas, industrie.rack.2024.001 Ijdpfxoy Ez Dnj Alceib

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 2.000.000 kg, tinggi rak: 7.080 mm, panjang total: 128.800 mm, jumlah baris rak: 14, panjang rak: 18.400 mm, kapasitas muatan per bagian penyimpanan: 145.000 kg, Perlengkapan: dua sisi, Kami menawarkan rak rak palet OHRA PIII yang sangat terawat dengan baik ini, tahun pembuatan 2006. Iedpfoyzzipex Alcjib

Kondisi: baru, Cantilever racking systems are ideal for storing long items such as pipes, bars, or panels. The uprights and profiles of our cantilever racks are made of particularly robust, hot-rolled IPE steel profiles. The racking rows can be extended to any length and are available in single-sided or double-sided versions. Isdpfx Aedmkv Helceib Cantilever racks are relatively easy to install and reconfigure. As there are no actual shelves, the height and angle of the arms can be effortlessly and quickly adjusted. This flexibility allows you to store a wide variety of loads. If you require racks or accessories in other configurations or designs, please feel free to contact us. We offer a comprehensive range of new and used racking systems and accessories, and we are happy to assist you with your planning. Additional accessories available, including: Frame, corner, and collision protection, push-through guards, chipboard panels, grating, rear mesh, and depth supports. Shipping: Please inquire about shipping costs by providing your postcode, location, and desired quantity of articles. Further services: Planning, racking assembly/disassembly, purchase/sale All technical details, information, and prices are subject to change and errors. Prior sale reserved!

Kondisi: bekas, Cantilever racking, heavy-duty rack consisting of: Iisdpfjd Eqlpjx Alcob - Rack: with 2 uprights each - Load arms: double-sided - 6x crossbars Depths: 900/500/400/300/230 mm - welded construction - also available: other quantities and heights on request - Quantity: 1 rack available - Transport dimensions: 2100/2020/H2170 mm - Own weight: 430 kg/unit

Kondisi: baik (bekas), Tahun pembuatan: 2000, Penawaran 25521 Rak gudang lengan kantilever dua sisi untuk barang panjang – tanpa isi Data teknis: - 2 unit rak gudang kantilever dua sisi, masing-masing terdiri dari - 5 tiang dengan sistem plug-in, lengan penyimpanan dapat disetel ketinggiannya - Panjang per rak sekitar 4.150 mm - Panjang total sekitar 9.300 mm - 130 lengan penyimpanan - Tinggi tiang masing-masing sekitar 6.000 mm - Lebar tiang + lengan penyangga sekitar 1.700 mm - Kapasitas beban maksimum per lengan sekitar 400 kg - Kapasitas beban maksimum per tiang sekitar 5.000 kg Ijdpfox R Si Ejx Alcsib - Jarak sumbu antar bagian rak yang dihubungkan diagonal sekitar 1,0 m - Jarak penyesuaian ketinggian lengan rak 125 mm - Ukuran lengan: P 700 x L 90 x T 70 mm - Ukuran tiang: L 250 x T 100 mm - Berat per tiang sekitar 400 kg - Berat per lengan sekitar 10 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mixer kerucut baja Kapasitas bruto: 5.000 liter Iisdpoydu Uvefx Alceb Kapasitas netto: 3.500 liter (70%) 2 saluran keluar: 1x bawah (outlet segmen bola asli), 1x samping dengan katup geser (posisi untuk penghancur gumpalan) Sekrup pencampur model kantilever Kondisi operasi baik (dibongkar setelah pabrik dihentikan) Termasuk rangka bawah

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different bay spacing); this example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided racking uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms each, 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5,180 mm high, hot-dip galvanized Foot and arm depth 1,200 mm with 3 height-adjustable storage arms each Iedoddmq Tepfx Alcsib Load capacity at load center 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, c/c = 1,300 mm; standard is 1.30 m Other standard bay lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From bay length 1.50 m a small surcharge applies to the stated price! Special dimensions (different bay spacings) are available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! If you do not specify other bay spacings, we will supply the rack with a bay spacing of 1.30 m. In this case, the length of a racking run with 4 uprights (3 bays) is approx. 4 m. Supplied with all bolts and nuts (dispatched within Germany in a package directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, 1 racking unit with 4 uprights €2,120 (net)! Surcharge for cantilever arms with guardrails for this rack: €40 Iisdpfoddmqnex Alcjb Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional frames (or by using different bay widths), this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided upright, approx. 3,500 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity with a load center of 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per storage level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, center distance = 1,300 mm; standard is 1.30 m. Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a length of 1.50 m onwards, a small surcharge applies to the stated price! Special dimensions (other bay widths) are available on request, but will also incur a surcharge and have a longer delivery time as they must be made to order! If you do not specify a different bay width, we will deliver the rack with a bay width of 1.30 m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany via parcel service directly from Würth), excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) are available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location, including loading! 1 racking unit with 4 uprights: €2,899 (net)! Shipping within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by using different bay widths); this 4-frame example is simply the most common solution! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 80 - each with 2x3 adjustable arms, 1.20m long, 500kg load capacity per arm - with cross bracing approx. 1.30m Isdeddmtcopfx Alcsib - Uprights double-sided, approx. 3500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm; standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From bay width 1.50m an additional charge applies. Custom sizes (different bay widths) are available on request, also at an additional charge and with longer delivery times as they must be specially manufactured! If you do not specify a different bay width, we will deliver the racking with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us for options!

Tahun pembuatan: 2017, Kondisi: baru, Cantilever racking, double-sided, 3.50 m height, 1.20 m arms, 750 kg per arm – NEW: Ijdpfxeddmtqj Alcsib Price ex location, loading included! 1 racking unit with 4 uprights €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50 m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2 x 3 adjustable arms, 1.20 m long, load capacity 750 kg per arm - With braces approx. 1.30 m - Double-sided uprights, approx. 3500 mm high, galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at 600 mm load center: 750 kg per arm / 2250 kg per upright - With longitudinal and diagonal bracing, c/c = 1300 mm, standard 1.30 m - Other standard bay lengths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - For lengths from 1.50 m, a small surcharge applies to the stated price - Custom dimensions (different bay distances) available on request, surcharges apply and lead time is longer as they are custom-made Unless you specify otherwise, racks are supplied with a bay distance of 1.30 m. With 4 uprights (3 bays) per racking row, total length is approx. 4 m. Supplied including all bolts and nuts (delivered within Germany directly from Würth by parcel service), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Price ex works, including loading! Iisdjddmp Aspfx Alcob 1 racking unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport costs within Germany (excluding islands): €430 (net)! You can of course build longer or shorter racking units by omitting or purchasing additional frames (or by using varying axle spacings). This example with 4 frames represents the most common racking solution! A hot-dip galvanized cantilever racking system comprising: - Single-sided racking uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 - Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms - Load capacity per arm (load center 600 mm): 750 kg / per upright 2,250 kg - With 4 uprights per level: 4 x 750 kg = 3,000 kg; arms IPE 100 - Supplied with longitudinal and diagonal bracing, c/c spacing 1,300 mm (standard is 1.30 m); if no other specification is given, racks will be delivered with 1.30 m axle spacing. Other spacings possible, e.g., 1 m, 1.25 m, or 1.50 m for a small surcharge, or custom measurements. - Standard overall length for a single row with 4 uprights is approx. 4,000 mm. - Delivery includes all bolts and nuts, but excludes floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us for advice!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 4.16m high, 1.20m arms, 750kg per arm – New –: Iiodpfx Aeddmp Uslceb Price ex works, including loading! 1 racking unit with 4 uprights: €2,300 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also create longer or shorter racking units by omitting or adding uprights, or by varying the bay spacing. The example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 100 Uprights: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity with load centre 600 mm: 750 kg per arm / 2250 kg per upright For 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal braces e = 1300 mm, standard is 1.3m – unless otherwise specified, we will supply the racking with a bay spacing of 1.3m. Other spacings possible (e.g. 1m, 1.25m) also available at a small surcharge: 1.5m or custom dimensions! Standard delivery length for one row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, en-Kragarm rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €4,185 (net)! Iedpfx Aleddmqyscjib Transport price within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter racking units by omitting or adding additional frames (or by varying the bay spacing); this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: • 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 Each with 2 x 3 adjustable arms, 1.20 m, load capacity 860kg per arm With bracing approx. 1.30 m • Upright, double-sided approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable arms per side Load capacity at load center 600 mm: 860kg per arm / 2,600kg per upright side Including longitudinal and diagonal braces, bay spacing = 1,300mm, standard is 1.30m. • Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! • Special sizes (other bay spacings) are also available on request, but are subject to an extra charge and longer delivery time as these are custom manufactured! If you do not specify a different bay spacing, we will deliver the racking with a bay spacing of 1.30m. In this case, the length with a racking row of 4 uprights (3 bays) is approx. 4m. • Supplied with all bolts and nuts (shipped within Germany as a parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us! Photos shown are of a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, The prices listed in this advertisement are as of mid-2021. Due to the current international situation, steel and transport prices are rising almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with an up-to-date quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport cost within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames you can build longer or shorter rack units (also by varying bay distances); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided rack uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - with 2 x 3 adjustable arms each 1.20m, 500kg load capacity per arm - with ties approx. 1.30m - Upright, double-sided approx. 4160mm high, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable cantilever arms - Load capacity at load centre 600mm: 500kg per arm / 2250kg per upright side - With longitudinal and diagonal bracing, spacing e = 1300mm, standard is 1.30m Other standard frame lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies in addition to the price stated! Special sizes (other bay distances) are also available on request, but likewise subject to a surcharge and with a longer delivery time, as they must be custom fabricated! Iiedpsddmr Nefx Alcob If you do not specify another bay distance, we will deliver the rack with a bay distance of 1.30m. In this case, the length of a rack line with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors.

Kondisi: bekas, en001 Iijdpfjx Igwrjx Alcsb