Beli Kraussmaffei Kmd63 K bekas (35.618)

Kondisi: baik (bekas), Tahun pembuatan: 2006, 1 buah mesin cetak injeksi bekas dengan robot Produsen: KRAUSS MAFFEI Tipe: KM420-1900C2 Pgsdpfx Aqozl Sfmsvot Tahun pembuatan: 2006 Gaya penutup: 420 ton Jarak antar tiang: 800 x 800 mm Diameter sekrup: 70 mm Volume injeksi maksimum: 1.047 cm³ Berat produk cetakan: 853 g/siklus Pengontrol: MC5 Perlengkapan: 2 buah penarik inti Robot SEPRO, Tipe: SR4030 S3 VISUAL Pengaturan kanal zona panas 12 titik Antarmuka dengan unit pengatur suhu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and a state-of-the-art MC6 control system. Pjdjyugkwspfx Aqvsgt Plasticising Unit Complete plasticising unit dedicated to thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / return): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw speed: 285 rpm Plasticising capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical and Hydraulic Equipment Rated pump motor power: 75 kW Installed heater capacity: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions and Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (length × width × height): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed according to the current demand during the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% - Servo drive technology for hydraulic pump - World-class quality and proven industrial technology - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of hydraulic components - Can be installed on existing hydraulic injection moulding machines

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 76.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.200 kN, diameter sekrup: 70 mm, volume langkah: 1.047 cm³, panjang pelat: 1.200 mm, tinggi pelat: 1.270 mm, panjang total: 9.830 mm, lebar total: 2.330 mm, tinggi total: 2.480 mm, berat keseluruhan: 23.090 kg, KRAUSS MAFFEI KM 420-1900/55 CZ Multinject Nomor Inventaris: 503534 Pabrikan: KRAUSS MAFFEI Tipe: KM 420-1900 55 CZ Pengontrol: MC 4 Tahun Pembuatan: 2004 Jam Operasi: 76000 jam Data Teknis Sisi Penutup Gaya Penutup: 4200 kN Dimensi Cetakan (tinggi x lebar): 800 x 800 mm Ukuran Plat (tinggi x lebar): 1270 x 1200 mm Tinggi Pemasangan Minimum: 380 mm Jarak Antar Plat Maksimum: 1400 mm Langkah Pembukaan: 1020 mm Langkah Pengeluaran: 250 mm Gaya Pengeluaran: 95 kN Pusat Plat Bergerak D: 200 mm Pusat Plat Tetap D: 200 mm Berat Cetakan: 6700 kg Data Teknis Sisi Injeksi Diameter Sekrup: 70 mm Volume Langkah: 1047 ccm Tekanan Injeksi: 1778 bar Panjang Sekrup: 20 l/d Kecepatan Putaran Sekrup: 527 rpm Aliran Plastikasi: 95 g/s PS Aliran Injeksi Bebas: 953 g/s PS Jumlah Zona Pemanas: 6 Dimensi & Berat Dimensi Mesin (Panjang x Lebar x Tinggi): 9,83 m x 2,33 m x 2,48 m Pjdoz Dgc Ijpfx Aqvjgt Berat Total: 23090 kg Peralatan Teks Layar: Bahasa Jerman Penyangga Inti: Hidraulis 6x Mesin tanpa Sistem Penanganan Mesin tanpa Corong Material Elemen Perata Pemanas Cetakan: 16x Mesin Cetak Injeksi Dua Komponen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8,500 kN Maximum tool opening force: 560 kN Moving platen travel force (open): 153 kN Moving platen travel force (close): 117 kN Mounting plate (H x V): 1600 x 1600 mm Pedpfx Aqjyb Sx Hsvjgt Clear distance (H x V): 1140 x 1140 mm Mold opening stroke: 1600 mm Mold installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200 / 100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Stroke volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor output: 90 kW Installed heating capacity: 53 kW Cylinder heater control zones: 7 Oil capacity: 1500 l Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 43,000 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en001 Pgsdpfx Aeyrrwkjqvot

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin cetak injeksi KraussMaffei KM 65-160 C2 bekas, tahun pembuatan 2002, dengan sistem pendingin yang lengkap dan pendingin proses Frigel Microgel terpisah. Produsen: KraussMaffei Tipe: KM 65-160 C2 Jenis mesin: Mesin cetak injeksi Tahun pembuatan: 2002 Nomor mesin: 641741 Nomor pesanan: 646746/1 Gaya penutup: 650 kN / 65 t Berat mesin: 3.200 kg Jam operasional: 91.836:45 jam Tegangan operasi: 400 V Fasa: 3 Frekuensi: 50 Hz Arus total: 153 A Arus motor: 30 A Sekring utama: 160 A Sistem pendingin: Beberapa sirkuit pendingin Pengeluaran: Sabuk konveyor Produsen pendingin proses: Frigel Firenze S.p.A. Model pendingin proses: Microgel RCD80/12HP Pjdpfx Asz Aln Asqvsgt Tahun pembuatan pendingin proses: 2012 Nomor seri pendingin proses: 1205114 Tegangan: 400 V Tegangan bantu: 110 V Frekuensi: 50 Hz Arus maksimum: 29 A Refrigeran: R407C Isi refrigeran: 2,4 kg Tekanan tinggi maksimum: 27 bar Tekanan rendah maksimum: 19 bar Media: Air Rentang suhu: -5 hingga +90 °C Tekanan maksimum sirkuit air: 8 bar Berat: 240 kg Tersedia mulai bulan APRIL 2027

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Mesin injeksi Krauss Maffei KM 80-380 CX Tahun produksi: 2010 Unit penutup Gaya penekanan: 800 kN Dimensi pelat penahan (H × V): 670 × 670 mm Jarak antar kolom (H × V): 420 × 420 mm Tinggi cetakan (min./maks.): 250 mm Bukaan maksimum: 750 mm Unit injeksi Diameter sekrup: 40 mm Volume injeksi: 201 cm³ Berat injeksi (PS): 183 g Tekanan injeksi: 1860 bar Peralatan elektro-hidrolik Pjdpfx Aqjxw Upfsvegt Daya motor pompa: 15 kW Daya pemanas: 10,9 kW Dimensi dan berat Dimensi mesin (p × l × t): 4,09 × 1,48 × 2,02 m Berat (dengan panel kontrol): 3,55 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, wtryskarka-krauss-maffei-km-800-5000-mc Psdpfoxqh I Isx Aqvogt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1 Pgsdpfx Aqozgwbcovet

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 78.454 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, volume langkah: 678 cm³, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 15.000 kg, Perlengkapan: dokumentasi / manual, Nomor Inventaris: 503393 Produsen: KRAUSS MAFFEI Tipe: KM 300-1400 CX Sistem Kontrol: MC5 Tahun Pembuatan: 2011 Jam Operasi: 78454 jam Gaya Penutupan: 3000 kN Dimensi Penampang (lebar x tinggi): 630 x 630 mm Ukuran Pelat (lebar x tinggi): 995 x 1050 mm Tinggi Pemasangan Minimum: 330 mm Jarak Pelat Maksimum: 1150 mm Jarak Pembukaan: 820 mm Diameter Sekrup: 60 mm Volume Langkah: 678 ccm Tekanan Injeksi: 2007 bar Peralatan: Mesin TANPA sistem penanganan! Tampilan layar dalam bahasa Jerman Stopkontak CEE 16A Tangki tekanan untuk fungsi paralel pengeluaran dan penarikan inti Penarikan inti secara hidraulik 2x Mesin tanpa hopper material Elemen perata Pedpfx Asz A U Iveqvsgt Antarmuka EUROMAP 67 untuk sistem penanganan Antarmuka untuk sistem penanganan Stopkontak Schuko 10A Dimensi Mesin (panjang x lebar x tinggi): 6,5 m x 2,2 m x 2,3 m Berat Total: 15000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine Clamping force (kN): 6500 Distance between tie bars (h x v) (mm): 1110 x 960 Mold opening stroke (mm): 1450 Min. mold height (mm): 450 Max. mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (HPS-M mixing) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Control version: MC5 Screen language: German Condition: Tested, fully operational Features: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend graphics - PV regulation - Production data interface consisting of 5 potential-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei LRX 350 Linear Robot: - Fully integrated control system - Horizontal stroke: 4000 mm Podpsy Apdqefx Aqvegt - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg

Kondisi: baik (bekas), Tahun pembuatan: 2000, Mesin Injeksi Krauss Maffei KM 800-8100 Tahun Pembuatan: 2000 Nomor Seri: 8I181A5 Sistem Kontrol: Krauss Maffei MC4 Psdpfx Aszrw Adjqvegt Data Teknis Kekuatan Penutupan: 8000 kN (800 t) Diameter Sekrup: 95 mm Rasio L/D: 23 : 1 Volume Injeksi: 3721 cm³ Berat Injeksi (PS): 3386 g Tekanan Injeksi: 2172 bar Suhu Silinder Maksimum: 375°C Kecepatan Putar Sekrup: 126 rpm Laju Injeksi: 659 cm³/s Laju Plastifikasi: 112 g/s Kekuatan Penekanan Nozel: 166 kN Unit Penutup Dimensi Pelat Pemasangan: 1600 × 1530 mm Jarak Antar Kolom: 1120 × 1000 mm Langkah Pembukaan: 1400 mm Tinggi Cetakan Minimum: 600 mm Tinggi Cetakan Maksimum: 1100 mm Jarak Maksimum (ruang): 2000 mm Langkah Ejektor: 250 mm Kekuatan Ejektor: 226 / 59 kN (depan / belakang) Sistem Elektro-Hidraulik Daya Motor Pompa: 110 kW Daya Pemanas yang Dipasang: 61 kW Jumlah Zona Pemanas: 7 Jumlah Siklus Kering (EUROMAP): 560 siklus/jam Kapasitas Tangki Oli: 1500 l Arus Motor: 235 A Total Konsumsi Arus: 455 A Sekering Utama: 2 × 250 A Perlengkapan Sistem Kontrol: Krauss Maffei MC4 Antarmuka Robot: Euromap 12 Inti Hidraulik: 4 buah Katup Pneumatik: 4 buah Persiapan untuk Robot: Ya Sistem Pelumasan Terpusat: Ya Sistem Pendingin Oli: Ya Dimensi dan Berat Panjang: sekitar 10.600 mm Lebar: sekitar 2860 mm Tinggi: sekitar 2410 mm Berat: sekitar 47.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Pedpeyh I Emefx Aqvegt

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit Pgjdpjw U N Ixjfx Aqvot - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 6.200 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.200 kN, diameter sekrup: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control unit. Screw diameter: 75 mm. Extras: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The machine is delivered RE-Conditioned by the technical expert team of UK Transitus. Optionally, we can offer on-site commissioning at the customer's facilities, ensuring reliable operation upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ SHOT WEIGHT: 1126 g MAX. PLATEN DISTANCE: 1400 mm MIN. MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm Pgodpfxswq D Efs Aqvst TIE BAR DISTANCE: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6,282

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines on an ongoing basis. Year of manufacture: 2010 We have been a wholesaler of used injection moulding machines for over 25 years. Current notice – Tax benefit for used machines: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control system: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Equipment / Extras: - 2 x core pull (movable core pull, fixed core pull) - Pneumatic valve 1 on moving platen - Accumulator for increased injection capacity - Fast SK demounting CX Midrange - Ejection of cold sprue - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard - Graphic analysis and maintenance notifications - Electronic coding of injection unit - Pneumatic valve at fixed platen for air blast - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target vs. actual - PV control - Active backpressure regulation - From first ownership – origin Germany - Maintained regularly by manufacturer and previous owner Clamping unit: Clamping force: 2500 kN / 250 tonnes Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Maximum daylight: 820 mm Minimum mould height: 330 mm Maximum opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Pgsdpfx Asxqhuusqvjt Complete documentation (manual, software) Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately. The machine is offered fully tested and functional. The machine is our exclusive property. The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power. About our company and equipment offered: - We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse - All offered machines are inspected and tested before disassembly - We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines - All offered machines come from successful businesses where maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse

Tahun pembuatan: 2008, jam operasional: 3.200 h, Kondisi: siap digunakan (bekas), diameter sekrup: 60 mm, el Pjdpfxozw Atlo Aqvegt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Mesin injeksi Krauss Maffei KM 800-5000 MC Tahun produksi: 2001 Perlengkapan: robot Rincian teknis: Gaya penutup: 8.000 kN Gaya maksimum pembukaan cetakan: 356 kN Gaya dorong pelat bergerak (pembukaan): 98 kN Gaya pelat bergerak (penutupan): 92 kN Ukuran pelat (lebar × tinggi): 1.610 × 1.530 mm Jarak antar kolom (lebar × tinggi): 1.120 × 1.000 mm Langkah pembukaan cetakan: 1.400 mm Tinggi cetakan minimum: 600 mm Pgjdpfezd Ta Nex Aqvjt Bukaan maksimum: 2.000 mm Langkah ejektor hidrolik: 250 mm Diameter sekrup: 90 mm Rasio L/D: 23 Tekanan injeksi: 1.742 bar Volume injeksi: 2.863 cm³ Berat injeksi (PS): 2.605 g Data umum mesin Dimensi (p × l × t): 10.500 × 2.860 × 2.890 mm Berat: 43.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 1998, Mesin Injeksi Krauss Maffei KM 800-8000 MC Tahun Pembuatan: 1998 Nomor Seri: 8D980U9 Pengendali: Krauss Maffei MC3F Kekuatan Penutupan: 8000 kN (800 ton) Diameter Sekrup: 130 mm Rasio L/D: 22 : 1 Volume Injeksi: 6570 cm³ Berat Injeksi (PS): 5617 g Tekanan Injeksi: 1296 bar Suhu Silinder Maksimum: 375°C Jarak Antar Kolom (T x L): 1120 × 1000 mm Dimensi Plat Pemasangan: 1600 × 1530 mm Langkah Pembukaan: 2000 mm Tinggi Cetakan Minimum: 600 mm Jarak Maksimum (bukaan): 2000 mm Langkah Pengeluaran: 250 mm Kekuatan Pengeluaran: 226 / 95 kN (depan / belakang) Kecepatan Rotasi Sekrup: 92 putaran/menit Pjdszrwy Aepfx Aqvegt Laju Injeksi: 929 cm³/detik Daya Motor Pompa: 132 kW Daya Pemanas: 70 kW Jumlah Zona Pemanasan: 7 Siklus Kering (EUROMAP): 700 siklus/jam Kapasitas Tangki Oli: 3600 l Tegangan Suplai: 400 V / 50 Hz Panjang Mesin: sekitar 10.500 mm Lebar Mesin: sekitar 2650 mm Tinggi Mesin: sekitar 2400 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Mesin injeksi Krauss Maffei KM 50 - 100 AX Mesin injeksi elektrik Tahun produksi: 2011 Jam kerja: 47799 Pgedpfxev Hxgqe Aqvot Bahasa operator: Jerman, Rumania, Ceko Unit penutup - Gaya penutupan cetakan: 500 kN - Gaya pembukaan cetakan: 39,9 kN - Dimensi pelat pemasangan (t x l): 510 x 460 mm - Jarak antar kolom (t x l): 410 x 360 mm Unit injeksi - Diameter sekrup: 25 mm - Tekanan injeksi: 2025 bar - Volume injeksi: 49 cm3 - Berat injeksi untuk PS: 45 g Dimensi dan berat - Berat bersih dengan panel kontrol: 3,9 t - Dimensi mesin (panjang x lebar x tinggi): 4,13 x 1,6 x 1,8 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, KM 500/2700C2 Technical Data Clamping Unit: Clamping force: 5000 kN Tie bar spacing (h x v): 900 x 800 mm Minimum mould height: 480 mm Pgsdpozgwbvofx Aqvjt Maximum platen distance: 1650 mm Centering diameter: 200 mm Mould weight: 7900 kg Injection Unit: Screw diameter: 80 mm Shot volume: 1433 ccm Injection pressure: 1829 bar Equipment: MC 4 control system Core pulls: 2+2 Machine is sold without robot and peripherals!

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 29.000 h, gaya penjepit: 50 kN, volume langkah: 59 cm³, tekanan injeksi: 2.500 batang, berat keseluruhan: 3.700 kg, diameter konveyor sekrup: 25 mm, Freight basis: ex works Delivery time: by arrangement Terms of payment: 100% prior to machine collection, strictly net Manufacturer: Krauss Maffei Model: KM50-180AX Condition: from ongoing production Podpfx Ajppigdoqvegt Operating hours: approx. 26,000 CLAMPING UNIT: Clamping force: 50 t Opening stroke: 300 mm Min. mould installation height: 150 mm Max. mould installation height: 470 mm Tie bar distance (h x v): 410 x 360 mm Platen dimensions (h x v): 510 x 460 mm Centering diameter (nozzle/ejector plate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Shot weight in polystyrene: 54 g Stroke volume: 59 cm³ Injection pressure: 2,500 bar CONTROL: MC5 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 x (hydraulic core pull unit) Air valves: 2 Hot runner zones: 6 Robot interface: Euromap 67 Other equipment: Quality monitoring package GENERAL DATA: Installed heating capacity: 8.1 kW Pump drive power: not applicable Total connected load: motor + heating Total weight: 3,700 kg Overall dimensions (L x W x H): 4.4 x 1.6 x 1.9 m

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN Pgodetrya Ropfx Aqvjt - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 59.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.200 kN, diameter sekrup: 60 mm, jarak antara tiang: 800 mm, volume langkah: 769 cm³, panjang pelat: 1.200 mm, tinggi pelat: 1.270 mm, panjang total: 6.830 mm, lebar total: 2.330 mm, tinggi total: 2.480 mm, berat keseluruhan: 23.090 kg, Perlengkapan: dokumentasi / manual, KRAUSS MAFFEI KM 420-1900 C2 Nomor Inventaris: 503535 Produsen: KRAUSS MAFFEI Tipe: KM 420-1900 C2 Pengontrol: MC 4 Tahun Pembuatan: 2005 Pgodpfxez Dgcbs Aqvet Jam Operasi: 59.000 jam Data Teknis Sisi Penutup Gaya Penutup: 4200 kN Dimensi Batang (lebar x tinggi): 800 x 800 mm Ukuran Pelat (lebar x tinggi): 1270 x 1200 mm Tinggi Pemasangan Minimal: 580 mm Jarak Pelat Maksimal: 1300 mm Langkah Pembukaan: 720 mm Langkah Pendorong: 250 mm Gaya Pendorong: 95 kN Pusat Pelat Bergerak (Diameter): 200 mm Pusat Pelat Tetap (Diameter): 200 mm Berat Alat: 6700 kg Data Teknis Sisi Injeksi Diameter Sekrup: 60 mm Volume Langkah: 769 ccm Tekanan Injeksi: 2200 bar Panjang Sekrup: 23 l/d Kecepatan Putaran Sekrup: 285 rpm Laju Plastifikasi: 70 g/s PS Laju Injeksi Bebas: 700 g/s PS Jumlah Zona Pemanas: 6 Dimensi & Berat Dimensi Mesin (Panjang x Lebar x Tinggi): 6,83 m x 2,33 m x 2,48 m Berat Total: 23.090 kg Perlengkapan Tampilan Layar (Bahasa Jerman) Sistem Penarik Inti Hidraulik (4x) Mesin tanpa Sistem Penanganan Mesin tanpa Corong Material Elemen Perataan Pemanas Alat (12x)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 300-1000 CX Injection Moulding Machine Psdpfx Aew U Rcdeqvogt Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with color monitor, integrated control panel, and disk drive station Clamping system: Fully hydraulic Plasticizing Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping Unit Clamping force: 3,000 kN Opening force: 169 kN Mounting plate dimensions (h × v): 995 × 1050 mm Tie-bar clearance: 630 × 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight opening: 1,150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2,304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticizing capacity (at standard speed): 54.3 g/s Electrical and Hydraulic Equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and Weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m