Beli Mep Shark 332 Rc Konnect bekas (3.871)

Kondisi: baru, Cutting diameter 250 mm Gisdpfx Ahjfg E H Rsbsw Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 25.4 x 0.9 mm Machine weight approx. 0.4 t Dimensions LxWxH 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a swivel arm - High-performance, latest-generation hydraulic control unit with low energy consumption - Base frame with pull-out coolant tank The machine fully complies with all CE regulations!

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Godpfxsfg E H Sj Ahbsiw Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Cutting capacity at 45 degrees: round 230 mm Cutting capacity at 45 degrees: flat 220 x 200 mm Cutting capacity at 45 degrees: square 200 x 200 mm Cutting capacity at 60 degrees: flat 140 x 100 mm Cutting capacity at 60 degrees: square 100 x 100 mm Cutting capacity at 60 degrees: round 110 mm Vice 285 mm Speed range: 36/72 m/min Gjdpfxsxaarko Ahbsiw Saw blade length 2,950 x 27 x 0.9 mm Total power requirement 1.5/1.8 kW Machine weight approx. 440 kg Space requirement approx. 1,620 x 1,360 mm Equipment/features: - Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL) - Large bearing-mounted rotary table * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * Continuously adjustable feed rate * Automatic cut-off at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guides made of carbide plates - 1x saw blade - 1x angle stop - Integrated chip cleaning brush - Control panel - front right - Hydraulic tensioner for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Coolant device - Operating instructions in German

Kondisi: baru, MSS2024-001 Giodpefg E H Nofx Ahbew

Kondisi: baru, Tahun pembuatan: 2024, Manual cutting cycle Automatic cut: (via selector switch) with stepless adjustment of descent speed and adjustment of cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted rotary table, center-axis-bolted and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Hydraulic unit for saw band tensioning and monitoring with display on the manometer Clearly arranged control panel with all operating elements Base frame, coolant tray, coolant pump, chip brush Cutting diameter: 250 mm Cutting width: 280 mm Gsdpfx Ahoftmxveboiw Saw band dimensions: 2950 x 27 x 0.9 mm Max. vice opening: 285 mm Band speed: 36 / 72 m/min Cutting capacity at 90 degrees, round: 250 mm Cutting capacity at 90 degrees, square: 220 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 60 degrees, round: 120 mm Cutting capacity at 60 degrees, flat: 140 x 80 mm Cutting capacity at 60 degrees, square: 80 mm Cutting capacity at 45 degrees, round: 200 mm Cutting capacity at 45 degrees, flat left: 220 x 200 mm / right: — Cutting capacity at 45 degrees, square left: 200 mm / right: 170 mm Machine weight approx. 0.4 t Space requirement approx. 1.8 x 1.3 x 1.8 m

Kondisi: baik (bekas), Tahun pembuatan: 2002, Bandsaw otomatis MEP Model: Shark 320 AXI Tahun: 2002 Gedpfx Aheyvzvxebeiw Kapasitas bundar: 260 mm Kapasitas pada 45 / 60 derajat: 230 mm / 150 mm Kapasitas persegi: 320 x 220 mm Kecepatan: 40 – 80 m/menit

Kondisi: baru, Cutting diameter 350 mm Saw blade length 4640 x 34 x 1.1 mm Table height -- mm Cutting diameter 350 mm Cutting speed 15 - 100 m/min Total connected load 4.0 kW Machine weight approx. 2800 kg Space requirement approx. 2200 x 3200 x 2200 mm Fully automatic band saw with dual-column guide for series cutting, especially in difficult-to-machine materials and solid stock. With this model, MEP offers a machine at the cutting edge of technology. Utilizing the highest quality materials, it boasts an exceptionally robust and torsion-resistant construction. An extremely sturdy saw frame made of cast iron guarantees the stability necessary for impressive cutting results. The robust cast iron columns, along which the saw frame slides on preloaded linear guides, ensure maximum cutting precision even under heavy loads. The advanced control system (MEP NC 5.0) provides the operator with maximum comfort and ensures smooth operation, featuring real-time control, monitoring, and correction. MAXIMUM PERFORMANCE > Two operating modes (semi-automatic and automatic) enable efficient cutting in any situation. > The control stores up to 100 cutting programs, each with different quantities and lengths, minimizing programming time for recurring jobs. > The automatically detected start position of the saw head reduces set-up times. > The saw head advances on linear guides driven by hydraulic cylinders with preloaded ball recirculation bearings, reducing mechanical vibration during cutting and providing greater stability. > The automatic adjustment of the front blade guide head to the dimensions of the stock being cut reduces processing time. > Saw blade tension is controlled by a brushless motor, continuously monitored, and automatically adjusted to the preset minimum value. Giedpfxolf Tu Uj Ahbjw HIGH FLEXIBILITY > The feed system, with a 600 mm stroke, is repeatable and allows cutting to any length. > The vertical roller pair allows holding and aligning any type of bar or bundle fed into the machine. > The vector inverter offers stepless adjustment of blade speed between 15 and 100 m/min, enabling the cutting of any material. > The motorized chip conveyor can be mounted to the right or left of the cutting area. FEATURES: Fully automatic NC 5.0 control -Innovative (Windows CE-based) touchscreen control with additional soft-touch keys for frequent operations -USB port -Joystick for manual control of X-Y axes -Controlled head feed with automatic compensation via servo valve integrated in the cylinder; continuous monitoring of the preset torque with precise feed rate adjustment in mm/min -Setting/preselection of stepless blade speed in m/min -Saw blade tensioning with blade tension control, display on screen via electronic transducer -Automatic detection of cutting start point -Large 7" color touchscreen for display and selection of all machine functions and parameters; rapid programming; detailed alarm and error messages -Extensive...

Kondisi: baru, Cutting diameter: 250 mm Saw blade length: 2950 mm Cutting width: 280 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Cutting range at 90°: flat 280 x 200 mm Cutting range at 90°: square 230 mm Cutting range at 45°: round 190 mm Cutting range at 45°: flat 180 x 180 mm Cutting range at 45°: square 180 mm Cutting range at 60°: round 120 mm Cutting range at 60°: flat 110 x 110 mm Giedjxz Hhzspfx Ahbew Cutting range at 60°: square 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.4 t High-performance mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (Infinitely adjustable feed and automatic shutdown at the end of the cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and setting of cutting pressure via compensating spring - Sturdy, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision - Large, adjustable cast steel band wheels - Hydraulic unit for saw blade tensioning and monitoring with display on manometer (blade tension = 900 kg) - Clearly arranged control panel with all operating elements - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade

Kondisi: baru, Model designation: Shark 282 CCS Giodpogvkbcofx Ahbjw

Kondisi: baru, Model designation Gjdpfxogvkgle Ahbjiw Shark 281 SXI evo

Kondisi: baru, Model designation Giedpfx Ahegvkchjbew Shark 281 CCS

Kondisi: baru, Model designation Gisdpfol Sva Isx Ahbow SHARK 331-1 NC 5.0 SPIDER

Kondisi: baru, Model designation Giedjgvkctepfx Ahbow Shark 282 SXI evo

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vice width: 285 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5 / 1.8 kW Machine weight: approx. 370 kg Space requirements: approx. 1,620 x 1,360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic saw bow lowering with infinitely variable feed adjustment Gjdpfsxaa H Isx Ahbjiw - Cut-off switch at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guide made of carbide plates - 1x saw blade - 1x angle stop - Rotating swarf removal brush - Control panel located at front right - Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vise opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for full function management * Front right, rotatable - Choice of manual or automatic bow descent * Infinitely variable adjustment of bow lowering speed - Carbide blade guides - Hydraulic blade tensioning with digital value display - 2 x blade speeds - 1 x bi-metal saw blade - 1 x angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Gedpfx Ajxaa S Rehbsiw Semi-automatic operation: - Electro-hydraulic vise clamping - Electro-hydraulic bow descent - Electro-hydraulic bow lift - Electro-hydraulic vise opening SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter 280 mm Cutting capacity at 90°: flat 380 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 300 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 200 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Required space: approx. 1647 x 2157 mm Weight: 720 kg Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Enables mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor control unit EVO for managing all functions * Located front right, rotatable - Optional manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw bow lowering speed - Saw blade guide with carbide inserts - Hydraulic saw blade tensioning – including digital tension indicator - Two saw blade speeds - One bi-metal saw blade - Coolant system - One angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation process: Gijdpfx Aexaax Dehbew - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vise

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 200 mm Cutting range at 90 degrees: square 230 x 230 mm Cutting range at 45 degrees: round 190 mm Cutting range at 45 degrees: flat 180 x 180 mm Cutting range at 45 degrees: square 180 x 180 mm Cutting range at 60 degrees: round 120 mm Cutting range at 60 degrees: square 110 x 110 mm Cutting range at 60 degrees: flat 110 x 110 mm Vice: 285 mm Gisdpfxjw U U Uwj Ahbew Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank capacity: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 435 kg Space requirements: approx. 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Miter cuts up to 60° - MEP microprocessor control EVO for monitoring all functions * positioned front right, rotatable - Optional manual or automatic lowering of the saw bow * infinitely variable adjustment of the saw bow descent - Saw blade guide made from carbide inserts - Hydraulic saw blade tensioning with digital value display - 2x blade speeds - 1x bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw band dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - With mitre cuts from 45° to the right up to 60° to the left * Mitre adjustment via a large rotary table - MEP microprocessor control EVO for managing all functions * Swivel-mounted, located front right - Choice of manual or automatic lowering of the saw frame * Infinitely variable adjustment of the saw frame descent - Saw band guide made from hard metal plates - Hydraulic saw blade tensioning - incl. digital value display - 2x saw band speeds - 1x bi-metal saw band - Coolant device - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Gedpfx Ahjxaatbsbjiw Operation in semi-automatic mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Kondisi: baru, Cutting diameter: 330 mm Cutting capacity at 90 degrees, flat: 510 x 320 mm Cutting capacity at 90 degrees, square: 320 x 320 mm Cutting capacity at 45 degrees, flat: 350 x 320 mm Cutting capacity at 45 degrees, round: 320 mm Cutting capacity at 45 degrees, square: 300 x 300 mm Cutting capacity at 60 degrees, flat: 230 x 310 mm Cutting capacity at 60 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, round: 200 mm Speed range: 15 - 100 m/min Saw blade dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Specifications: - Sturdy electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre angle adjustment via large rotating table - MEP EVO microprocessor control for managing all functions * Located front right, rotatable - Optional manual or automatic descent of the saw bow * Infinitely adjustable saw frame descent - Carbide blade guides - Hydraulic blade tensioning with digital display - 2 blade speeds - 1x bi-metal bandsaw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic vice clamping - Electro-hydraulic saw frame lowering - Electro-hydraulic saw frame lifting - Electro-hydraulic vice opening Gijdpoxaa Tzefx Ahbew

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90°: flat 280 x 220 mm Cutting capacity at 90°: square 220 x 220 mm Cutting capacity at 45°: round 230 mm Cutting capacity at 45°: flat 220 x 200 mm Cutting capacity at 45°: square 200 x 200 mm Cutting capacity at 60°: flat 140 x 100 mm Cutting capacity at 60°: square 100 x 100 mm Cutting capacity at 60°: round 110 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment/features: - Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotary table * For miter cuts from 45° right to 60° left - Automatic saw bow lowering * Infinitely variable feed adjustment * Automatic cut-off at end of cut - Manual cutting function selectable Giodjxabpwspfx Ahbjw - 2x saw blade speeds - Carbide blade guides - 1x saw band - 1x angle stop - Rotating chip removal brush - Operator control panel – front right - Hydraulic power pack for saw blade tensioning * With analog pressure gauge (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Kondisi: baru, Cutting diameter: 230 mm Cutting range at 90 degrees, flat: 230 x 230 mm Cutting range at 90 degrees, square: 230 x 230 mm Vise width: 235 mm Speed range: 15 - 100 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control system: MEP CNC Total power requirement: 3.18 kW Machine weight approx.: 1175 kg Space requirement approx.: 1980 x 1105 mm Giodpfx Ahsxabq Usbjw * Automatic double-column bandsaw with only 2.5 sqm footprint * * Maximum performance in the smallest space * Equipment: - Powerful CNC bandsaw machine with double-column design * for 0° cuts - Windows-CE based touch-screen controller * Swivel control panel, adjustable from 5.0 to 180° * Up to 100 cutting programs, each with different quantities and lengths * Minimizes programming time for frequently repeated jobs - 2 operating modes (semi-automatic and automatic) * Enables efficient cutting under all conditions - Saw head feed via hydraulic cylinders . Powered linear guides with preloaded ball bearings * Reduces mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - Feed system with 600 mm stroke, repeatable for all lengths - Vertical roller pairs for any type of bar or bundle material - Infinitely variable blade speed adjustment from 15 to 100 m/min - Robust cast iron frame (G25) to compensate for vibrations - Safety enclosure according to the latest safety regulations . In accordance with Machinery Directive EN 13898/2007

Kondisi: baru, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 – 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Gedpfx Aoxabwhshbsiw Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H) 1800 x 1900 x 1750 mm Features: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - Equipped with additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and fast setting of all machine parameters * With additional soft keys and backlit display * 10 programs, each with max. 9999 pieces and max. 9999.9 mm in length - Material feed with stepper motor via ball screw * Single stroke of 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise setting of cutting feed rate with indication in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cutting start - Large dimensioned, adjustable cast steel deflection wheels - Saw blade tension with tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-adjust vice * With interchangeable clamping and stop jaws - Large, side-mounted chip tray and coolant tank * Equipped with 2 electric pumps for band lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating manual in German Info from manufacturer: When installing this saw on a power network with residual-current circuit breaker (RCD), it should be all-current sensitive and not rated below 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Kondisi: baru, en-GB-001 Gedpfx Ahexaacieboiw

Kondisi: baik (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 108401 23-D, Penawaran 25318 Data Teknis: - Mesin gergaji pita manual - Ukuran pisau pita: 2375 x 20 x 0,9 mm - 2 kecepatan pemotongan: 33 / 66 rpm - Kapasitas penjepitan maks.: 205 mm - Sudut kemiringan kiri + kanan: 30° - Area pemotongan – 90°: bulat 160 mm, persegi 160 mm, datar 200 x 100 mm - Area pemotongan – 45° kiri + kanan: bulat 140 mm, datar 140 x 60 mm - Penggerak: 400 V / 1,5 / 1,8 kW Gedpfxoxta N As Ahbeiw - Sistem pendingin - Jalur rol keluar dengan stopper: 3000 mm - Jalur rol masuk: 1500 mm - Berat: sekitar 350 kg - Kebutuhan tempat: sekitar L 1100 x T 1700 x P 1550 mm

Kondisi: baru, Cutting diameter: 280 mm Saw band length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control system: NC Cutting range at 90° (flat): 330 x 260 mm Cutting range at 90° (square): 260 x 260 mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Godpefg E H Dofx Ahbeiw Space requirement: approx. 3.3 x 2.83 x 2.23 m Note: Special promotion price!!! • Fully automatic hydraulic band saw • Miter cuts up to 60° to the left possible • Saw band length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touchscreen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required space: 3.4 m² • Footprint: 1900 mm wide x 1800 mm deep