Beli Reinhold Beck Maschinenbau Gmbh Gergaji Potong Di Bawah Meja Utk 600 bekas (84.522)

Kondisi: baik (bekas), Gergaji meja dan potong TGS 173 dengan meja geser - di atas lemari bawah bergerak dengan 2 laci - kaki penyetel tidak termasuk Iedpox R Eadjfx Afistf

Kondisi: baru, Tahun pembuatan: 2026, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined at 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power: 10 HP (7.5 kW), 400 V/50 Hz TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Itsdpohw Ng Iefx Afief Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for a bundle weight of up to 80 kg Maximum speed of the push-feed system: 90 m/min Pneumatic lift of the pusher at the end of the cutting cycle and overhead return. Data entry management: 12-inch TOUCH SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit and enter cutting cycles (patterns) directly on the controller Transfer of cutting lists created on PC via USB or Ethernet port Working software: Manual entry of bundle length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board sequence) 1000 cutting lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: full optimization with knot and defect removal (OPTION NOT INSTALLED ON THIS MACHINE) Technical description: "OPTI PLUS" package: for the removal of knots and defects Photocell for reading knots and defects for wood mapping Marking with fluorescent chalks/crayons (Note: Only orderable in combination with ZA250) Pneumatic side clamping device Program for creating lists on PC in XML format

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tabel Pemotong M&J 6000-12 Kondisi sangat baik Pisau penyeimbang telah dilas ulang dan dikeraskan sepenuhnya Poros dengan Sistem Bantalan pengaturan 1 Ijdpfx Ajw Ufhbefietf ✔️ Siap pakai segera Hubungi kami untuk harga dan detail lebih lanjut.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), lebar pemotongan (maks.): 1.030 mm, diameter mata gergaji: 450 mm, penyesuaian kemiringan mata gergaji: 45 °, jenis penyesuaian ketinggian: listrik, TECHNICAL DATA – Demonstration machine from showroom Roller carriage length: 3200 mm Cutting length: 3400 mm Maximum cutting height: 155 mm at 90°, 105 mm at 46° Cutting width, rip fence: 1030 mm Maximum saw blade diameter: 450 mm Saw blade retractable below the table: Ø 400 mm Table size, cast iron table: 1200 x 655 mm Table extension: additional 750 x 655 mm Table width extension: 1200 x 655 mm Table height +/- 20 mm: 900 mm Main saw blade speed: 3000 / 4000 / 5000 / 6000 rpm Net weight: approx. 1051 kg TECHNICAL DESCRIPTION Robust German engineering Suitable for edging, cross-cutting, sizing, mitre cutting, etc. Stable and self-supporting machine body constructed as a solid welded frame from thick-walled steel profiles, laser-processed steel sheets, and precisely machined Rigid, finely planed cast iron table mounted on the machine body The sturdy and powerful saw unit, installed in the machine base, ensures precise cuts The complete saw shaft assembly is dynamically balanced; double-guided, cast iron tilt segments with double column guide for height adjustment, and the double ball-bearing long circular saw shaft guarantee absolute smooth running Ball-bearing double roller carriage is smooth-running and maintenance-free; precise, backlash-free movement along the entire length, guided by hardened and ground round steel rails with remote locking in 50 mm increments Stable yet lightweight cross-slide made from steel profiles, with a support roller at the outer narrow side; cross-slide extension on the wide side extendable up to 250 mm Length stop on the cross-slide with mm scale and telescopic extension, extendable up to 3500 mm; equipped with 2 robust and backlash-free adjustable stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, steplessly adjustable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set via a locking system Rip fence with cutting width of 1030 mm to the right of the saw blade, fine adjustment, easily adjusted and locked manually; dimension display via easy-to-read mm scale on adjustable rule carrier Table width extension: 1200 x 600 mm and table extension: 750 x 655 mm Operation at the machine body via 4.3" touchscreen control for cutting height, tilt adjustment, and speed Electromotive height and tilt adjustment by touch buttons Itedpfx Afsgz Hx Dsisf Saw blade tilt range: 0° – 46° APA quick-release saw blade system Main saw blade speed: 3000 / 4000 / 5000 / 6000 rpm Safety guard swings away on both sides, guard hood with interchangeable wide/narrow inserts for saw blades up to Ø 450 mm Pushbutton control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm retractable below the table Extraction port: Ø 120 mm on machine body, Ø 80 mm on guard hood Roller carriage, length stop, and rip fence profile anodised CE compliant GS tested

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 15050, kedalaman tenggorokan: 250 mm, jarak antarpusat roller: 63 mm, berat keseluruhan: 100 kg, lebar total: 400 mm, panjang total: 800 mm, tinggi total: 1.212 mm, diameter pemasangan: 25 mm, tegangan masuk: 230 V, For sale: As-new, unused RAS EasyFormer 12.35-3 Beading and Flanging Machine. This machine is a true high-performance sheet metal forming tool, distinguished by its "Innovation Made in Germany" and ready for immediate use. Special Feature: The AutoTeach Function! This intelligent control system learns from the operator. It records the beading or flanging process in manual mode and then repeats it fully automatically. This ensures top repeatability for series production and extremely short training times for new staff (storage for 20 standard programs). Technical Highlights & Features: - Condition: Unused / As-new. - Control: Modern 7" touch panel with storage for up to 20 standard programs. - Split back gauge with precision ground plate (360 mm x 330 mm). - UnLock footswitch (1 included). - Capacity: Processes sheet thicknesses up to 1.75 mm (at 400N/mm2). - Working area: Max. working depth (throat) of 250 mm. - Speed: Infinitely variable from 0–28 m/min via sensitive footswitch with soft start. - Safety: Unique UnLock safety function—opens the upper roller instantly in case of danger or electrical overload. - Power: Simple operation at any standard 230V socket. - Fine adjustment of the lower shaft for precise roll positioning. Extensive Roller Package Included: Machine comes complete with five high-quality pairs of forming rolls for various applications (all as-new/unused). Details regarding the included forming rolls can be seen in the listing images: 1. Flanging rolls FL 2. Curving rolls BB 3. Preforming rolls V3 4. Beading rolls S4 5. Add-on rolls ZA RAS EasyFormer 12.35-3—Technical Data at a Glance: - Max. sheet thickness at 400N/mm2: 1.75 mm - Roll center distance: 63 mm - Max. working depth (throat): 250 mm - Throat height: 18 mm - Roll shaft diameter: 25 mm - Working height: 1000 mm - Working speed, infinitely variable depending on forming degree and gauge: 0 - 28 m/min Itedpfx Afeyz Di Eoief - Power requirement: 0.75 kW - Voltage: 230 Volt - Frequency: 50/60 Hz 1Ph - Net weight approx.: 100 kg - Sound level: 70 dB (A) - Dimensions: 400 mm (width); 800 mm (depth); 1,212 mm (height) Location, Guarantee, Inspection & Availability: Machine is located in 85221 Dachau/Pullhausen near Munich. Manufacturer's warranty has expired. Sale is made without any warranty for material defects (sold as seen). The machine is as-new, fully functional, and can be inspected and tested under power by appointment. Available immediately. See the EasyFormer 12.35-3 in action in a YouTube video by the manufacturer RAS Reinhardt Maschinenbau GmbH. The video's title: "Intelligent swaging machine RAS 12.35-3 EasyFormer". On the manufacturer's YouTube channel, you can view various videos demonstrating the functions of the included roller sets. The channel is named “RAS Reinhardt Maschinenbau GmbH”.

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 6034, jarak pergerakan sumbu X: 7.200 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 590 mm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 25 m/menit, pergerakan cepat sumbu Z: 25 m/menit, daya nominal (semu): 45 kVA, produsen pengendali: HEIDENHAIN, model controller: Bahnsteuerung iTNC 530, tinggi total: 2.900 mm, panjang total: 12.500 mm, lebar total: 4.810 mm, berat keseluruhan: 14.000 kg, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 12.000 rpm, tekanan kerja: 7 batang, The BZ 7000 is intended exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastic, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 - Year of manufacture: 04/2008 - Control system: HEIDENHAIN iTNC 530 path control - 4 axes - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Weight: 14t Equipment - Sturdy base frame in welded construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X axis (50 m/min) via rack and pinion drive - Y and Z axes (25 m/min) via ball screw - B axis 9000°/min - Swiveling operator panel - Automatic centralized lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 –25 -25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc magazine with 12 SK 40 tool positions - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed correction: 80 – 120 % - Drilling capacity in St60/Alu: up to 28mm Ø - Thread cutting capacity in St60/Alu: up to M24 - Measurement system: rotary encoder / length measurement system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V24/RS-232-C - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t Itjdpeyzxfnefx Afiof - Sound emission: average sound pressure level 79 dB(A)

Kondisi: baru, Tahun pembuatan: 2025, Plasma cutting system for pipes and profiles Machine for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily selected on the 12" touch display. After manual loading of the workpiece, the automatic cutting process is started. - Pipe length: max. 6000mm - For round pipes up to max. OD = 220mm - For square tubes up to max. 152.4 x 152.4mm (6" x 6") - Maximum pipe weight: 250KG - 4-jaw chuck Iodpfx Aogu Nmhofijtf - Side loading possible, secured by light curtain - Fully automatic cutting operation - Industrial PC control with 12” touch display - Data import via USB and LAN - Power supply: 400V 3-phase, 2KW - Dimensions: 690 x 100 x 180cm - Weight: approx. 1000KG Made in Germany The images show an older machine.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed using the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6,000 mm - For round pipes up to max. OD = 150 mm - For square tubes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight 150 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting sequence - Industrial PC control with 12" touch display Isdpfxsg Dvdce Afietf - Data import via USB and LAN - Power supply: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Made in Germany The images show an older, larger machine.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity tube 30 x 30 x 3 mm → Maximum bending capacity tube 42.4 x 2 mm (stainless steel 0.2 = 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for bending, feed, and rotation axes. The touchscreen control enables straightforward and intuitive programming and operation of the machine. After loading the tube, it is secured by the chuck in the carriage. This enables precise positioning of the tube, ensuring contour-accurate geometries. Standard features include geometry control before the bending process: if the bending process is initiated at the wrong position, the machine will not grant approval, thus eliminating operator error. Optional features add convenience, boost output, and therefore increase system efficiency. Data exchange with the optional pipe calculation software TBS-3D (PC version) is via USB stick or network. Existing pipe geometries can be imported using the software. Standard Equipment: → Servo drive for bending axis 1.5 kW → Adjustable rotational speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Itodstr U Hlspfx Afief Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The controller directly calculates the feed values and bending angles after entering length and angle values. Power supply: 400V 16A Dimensions: L: 2.3m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Hand pipe bender HRB-3D 850 For bending pipes and solid material up to a maximum of 12 mm. Precise and repeatable bending is ensured by three battery-powered digital displays, which show the bending angle, pipe feed, and pipe rotation accurately. - Three-jaw chuck 80 mm - Stop system for feed - Feed length approx. 850 mm The hand pipe bender should be securely mounted on a table or frame (not included in the scope of delivery). Ijdpsttagdefx Afietf We are happy to provide you with a detailed offer. Please send us your complete company address including email and contact person.

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Isdpfx Afottah Roijtf Photos show new machine.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, 1 Itodpjx Ebzqsfx Afiof

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, en-GB Itjdpfx Afsyxyv Ajiof

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 28 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2380029, tinggi total: 2.600 mm, lebar total: 1.500 mm, panjang total: 3.410 mm, berat keseluruhan: 4.200 kg, diameter rotor: 330 mm, jenis arus masuk: AC (pendingin udara), panjang rotor: 800 mm, daya: 30 kW (40,79 hp), Function: Itsdpfsyw N Acex Afief The input material is drawn in by two counter-rotating, slow-moving shafts (resulting in low dust and noise emissions), onto which cutter discs are mounted. This process is controlled by an advanced and innovative PLC system. If the machine becomes overloaded or if foreign objects are detected in the cutting unit, the control system will automatically reverse operation. The precise gap between the cutter discs enables energy-efficient size reduction of the material. The mounted scraper comb prevents wrapping and pulling up of the material to be shredded. The width of the cutters or the number of blades determines the output size of the shredded material. Applications: This robust and heavy-duty machine, designed for maximum service life, enables efficient shredding of special waste, metal chips, electronic scrap, steel drums, and even containers of all types filled with liquids. All types of industrial waste, metal and plastic containers Production scrap, file folders, paper, cardboard Electronic scrap, electric cables, metal chips Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, lebar sabuk penghalus: 150 mm, panjang sabuk penggiling: 9.000 mm, jenis penyesuaian ketinggian: listrik, kecepatan sabuk penggerinda: 25 mm/dtk, tinggi total: 2.200 mm, panjang total: 4.640 mm, lebar total: 2.650 mm, berat keseluruhan: 1.200 kg, panjang penggilingan: 2.500 mm, berat benda kerja (maks.): 80 kg, diameter sambungan ekstraksi: 180 mm, lebar penggilingan: 950 mm, kecepatan rotasi (maks.): 1.435 rpm, kebutuhan tinggi: 2.200 mm, persyaratan ruang panjang: 4.640 mm, lebar yang dibutuhkan: 2.650 mm, penyesuaian ketinggian meja: 500 mm, Perlengkapan: dokumentasi / manual, Wide-Belt Grinding Machine M2S92-150 with two abrasive belts for manual grinding, matt finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Not suitable for aluminum or titanium! Scope of delivery includes: - Machine base with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment abrasive belts - CE-compliant version - Operating manual + manufacturer’s declaration according to Annex 2 This robust machine, featuring a welded steel construction, ensures exceptionally smooth operation. The two machine bases are designed with offset sections allowing for the grinding of longer workpieces. The three-roller belt guidance system creates a maximally open working area for the operator, providing excellent accessibility especially when using hand sanding blocks. The belt drive is powered by a three-phase motor with a dynamically balanced drive roller. Each belt features individually adjustable, pneumatic belt tensioning, enabling optimal tension force adjustment for each belt. The dust extraction system is designed to effectively collect grinding dust and direct it to the extraction nozzle when connected to a suitable extraction system. For low-fatigue operation, the grinding unit runs on backlash-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table extends far enough that workpieces do not have to be pushed under the abrasive belt during placement. The main function controls are centrally located and designed for operator convenience. Iodpfx Afev S Sr Rjiotf Machine colors: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The basic equipment includes two initial abrasive belts (W x L) 150 x 9000 mm and a contact roller with approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling system for rotating and swiveling workpieces. The handling device is mounted centrally under the infeed frame. For operations requiring the handling device, the infeed frame is removed from the machine table. The handling unit is equipped with four vacuum suction cups for securely holding workpieces and consists of: the bearing with rotation axis, featuring a brake disc on the rear side. A swivel device is installed at the front of the rotation axis, which can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional indexing disc on the swivel head enables fine adjustment of the workpiece relative to the abrasive belt. The release of the rotation and swivel axes is pneumatically operated via footswitches; axial movement is manual. Permissible workpiece weight when using the table as a flat table with infeed frame = 80 daN, with handling unit based on the clamping plate = 25 daN or 120 Nm relative to the center of the rotation axis.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, lebar sabuk penghalus: 150 mm, panjang sabuk penggiling: 7.000 mm, jenis penyesuaian ketinggian: listrik, tinggi total: 2.200 mm, panjang total: 3.550 mm, lebar total: 2.000 mm, berat keseluruhan: 870 kg, panjang penggilingan: 1.500 mm, berat benda kerja (maks.): 80 kg, diameter sambungan ekstraksi: 180 mm, lebar penggilingan: 950 mm, kecepatan rotasi (maks.): 1.435 rpm, kebutuhan tinggi: 2.200 mm, persyaratan ruang panjang: 3.550 mm, lebar yang dibutuhkan: 2.000 mm, penyesuaian ketinggian meja: 500 mm, Perlengkapan: dokumentasi / manual, Wide Belt Sander MS92-150 – 3-Roller Deflection, Belt Size 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine base with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electrically operated table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE-compliant design The rigid machine frame, constructed of welded steel, ensures extremely smooth operation. Both machine bases are designed with an offset to enable grinding of workpieces longer than the machine table itself. The grinding belt is guided by three deflection rollers, providing the operator with an exceptionally open and accessible workspace, ideal especially for use with hand sanding blocks. The belt drive is powered by a three-phase motor with a dynamically balanced drive roller. Belt tension is pneumatically adjustable. The dust collection device is dimensioned to efficiently capture grinding dust and direct it to the extraction port when connected to a suitable extraction system. To allow for fatigue-free operation, the grinding unit runs in play-free, precise roller guides. The machine table can be quickly and easily adjusted to the appropriate workpiece height via the electrical table lift. The table lift guide components are maintenance-free. For loading, the table can be extended sufficiently so that workpieces can be placed without the need to slide them under the grinding belt. All main electrical controls are centrally located for user-friendly operation. Ijdpfx Afetwb U Aoistf Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small enclosures in “light grey” The standard machine is supplied with an initial equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling system for rotating and tilting workpieces. The handling system is mounted centrally beneath the infeed frame. To operate the handling system, the infeed frame is removed from the machine table. The handling system is equipped with four vacuum suction cups to hold workpieces and consists of: A bearing with a rotation axis featuring a brake disc at the rear. At the front of the rotation axis, a tilting device is mounted, which can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional indexing disc on the tilting head allows for fine adjustment of the workpiece to the sanding belt. The release of the rotation and tilt axes is pneumatically controlled by foot switch, while manual movement of the axes is required. Maximum permissible workpiece weight: as flat table with infeed frame = 80 daN; when using the handling device (on the clamping plate) = 25 daN or 120 Nm (relative to axis center).

Tahun pembuatan: 2015, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED INSERTING UNIT FOR METAL SHEET REINFORCEMENTS Iodpfxoyt Nm So Afijtf This system is part of a larger production line; please refer to our other listings for more details. The offered equipment includes 3 staging areas for cover layers, an automated adhesive application machine for sandwich panel bonding, a conveyor belt for manual assembly of inlays/ribs, gantry systems for handling the cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, Sheet metal, Plywood, Timber/PU battens, PVC, Styrofoam ADHESIVE GANTRY FOR CONTOUR & SURFACE BONDING (of cover layers & inlays): Number of area needle valves: 104 Number of contour needle valves: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate-controlled cabin (for storage of 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, panjang tali: 30.000 mm, kecepatan tali: 47.000 mm/menit, nomor mesin/kendaraan: HAW1700-EV-Funk, Hydraulic winch for log splitters, cranes, mini excavators, tractors, vineyard and horticulture machinery, and many other applications. The hydraulic attachment winch makes various tasks much easier: - Pull and position firewood for log splitters - Winch logs onto trailers - Extract rootstocks and trees - Use as an auxiliary winch on timber loading cranes and small excavators - Suitable for compact tractors and narrow-gauge tractors Featuring a robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes, this design offers versatile installation possibilities. (Threads are pre-cut and painted; re-tapping is required before use due to the corrosion protection.) It is equipped with a 20 m long, 6 mm thick steel cable. The large cable drum ensures a long cable service life. We install hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1700 kg Itjdpfxedf Ufpe Afijf Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Color: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available as a bolt-on unit or for welding. This version is supplied with electric hydraulic valve, radio remote control, and hoses to the motor. Item number: HAW1700-EV-Remote

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, kondisi baik. Kapasitas: hingga 3000 produk/jam Dimensi produk: Panjang: 160 - 400 mm, Tinggi: 50 - 150 mm Daya listrik: 5 kW Udara: 6,0 bar Siap kirim Itedpfx Ajylurkofiof

Kondisi: bekas, Technische Details: Ijdpfx Aewiu Smsfistf Weight: approx. 80 kg Machine dimensions (LxWxH): approx. 0.77 x 0.45 x 0.5 m BRUSHING MACHINE for deburring / brushing of tube ends / welded profile tubes / tube bodies on the face side

Kondisi: baik (bekas), Výrobca: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Výrobné číslo: M0793 Krajina výroby: Západné Nemecko (Kelberg / Eifel) Typ: jednozávitovkový plastový extrudér Dokumentácia: Súčasťou dodávky (pôvodný nemecký manuál a korešpondencia z roku 1987) Stav: Použitý, ale kompletný a funkčný Miesto uloženia: Ivanka pri Nitre, Slovensko Technické údaje (približne) Priemer závitovky: 30 mm L/D pomer: 25 D Hlavný motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 ot/min) Napájanie: 3 × 380–420 V / 50 Hz Riadiace napätie: 220 V Chladenie: Vzduchom chladený valec s vykurovacími zónami Riadiaca skriňa: Súčasťou dodávky, vrátane relé, ističov a analógových meradiel Popis: Kompaktný, jednozávitovkový laboratórny alebo malosériový extrudér od spoločnosti Plastik-Maschinenbau GmbH vyrobený v Západnom Nemecku. Určený na spracovanie termoplastických materiálov, testovanie materiálov alebo pre menšie extrúzne linky (napr. výroba hadičiek, profilov alebo na poťahovanie). Obsahuje originálny elektrický rozvádzač, manometer a kompletnú dokumentáciu. Po mechanickej aj elektrickej stránke je kompletný, vyžaduje už len štandardné uvedenie do prevádzky. Ijdpfx Aexu E E Sefietf

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, Professional Industrial Cutting Line (Longitudinal/Cross) – Grossmann – ONLY 100 Operating Hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from the renowned manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. This means it is in a nearly new technical condition, with minimal wear on the mechanical components. The machine was originally designed as a chipboard mat cutting machine, but thanks to its robust construction and versatile PLC control, it is flexible for a wide range of materials (e.g. rubber, cork, fleece, composites, foils, textiles, etc.). Technical Highlights & Equipment: Condition: Almost as new (max. 100 operating hours). Format: Maximum cutting length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwind and rewind units for fully automatic material flow from roll-to-roll or roll-to-sheet operation. PLC Control: Professionally programmed with selectable manual and automatic modes. Material Handling: Automatic gripper feed for precise material positioning, plus integrated edge extraction for perfectly cleaned edges. Isdpsylxmfefx Afistf Operation: Intuitive control panel with display, footswitch, and optical/acoustic completion signals (traffic light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring systems. Versatility: This machine is a true all-rounder for any roll-fed materials that need to be cut into precise sheets or strips. The sturdy construction on a high-quality aluminium profile frame ensures maximum torsional rigidity. Complete documentation, including process protocols, wiring diagrams, and technical drawings, is fully available. The machine can be inspected and tested under power by arrangement. I am happy to answer any detailed technical questions or application inquiries personally. Contact: Phone: 05427 9423 20

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jangkauan kerja: 6.000 mm, ketebalan lembaran (maks.): 25 mm, berat keseluruhan: 800 kg, en-de-001 Itsdsx S Ux Espfx Afief

Tahun pembuatan: 1998, Kondisi: bekas, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 Pinout Window profile processing machine Suitable for materials such as PVC, aluminium and wood windows in a continuous processing operation. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two workstations (machines), one electrical control cabinet, an operator panel, and transport units. Also included are a stand with a vibrating transport system, chip conveyor unit, and a stand with acknowledgement printer. Our photos are shown first at the current location, followed by additional photos demonstrating the system prepared for transport and for sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5mm - Drilling unit with collet chuck (vertical, upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical, downward) - Twin drilling unit with collet chuck (vertical, downward) Itsdpfx Afsu Ibuwjisf - 45° drilling unit with collet chuck (upward) Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical, upward) - Horizontal milling spindle with 11 disc cutters - Triple drilling unit with collet chuck (vertical, downward) - Triple drilling unit with collet chuck (vertical, upward) - Triple drilling unit with collet chuck (horizontal) 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width 2,300 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, XXL-Center RAS 75.06 - Data teknis umum dalam mm: Panjang tekuk: 6400 mm Ketebalan pelat maks (400N/mm2): 1,5 mm Ketebalan pelat maks (750N/mm2): 1,0 mm Ketebalan pelat maks (200N/mm2): 2,0 mm Jangkauan gerak rahang penjepit: 10 – 750 mm Ruang bebas di depan rahang hingga: 300° Meja pemasukan dapat ditarik keluar: ya Rahang penjepit: ya Pemrograman: otomatis via Bendex Dimensi mesin termasuk pagar pengaman sekitar: 9400 x 3000 Berat: 12,5 ton - Data terkait mesin: Pengoperasian bermotor; 400V, 50/60 Hz, 3-Phasa Tahun pembuatan: 2001 Kondisi: Akan direkondisi total - Iedpfsx Hf Tvex Afiotf Gambar hanya sebagai contoh -