Beli Ump Technika Metal Briquetting Press bekas (47.206)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5031183-000 104, frekuensi input: 50 Hz, tegangan masuk: 400 V, daya: 3 kW (4,08 hp), brikettpresse-ulm-2020 Guodpszcnvksfx Aa Ded

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Guedpfov Rpxlex Aa Ded Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: baru, Tahun pembuatan: 2026, en-GB Gusdpfod Nm Siex Aa Djd

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 Gjdpfx Asgl Nlmoa Djud (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Gedpfx Aaschqxxe Djud Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Your Advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: Godpfofci D Aox Aa Deud -Timer function + €490 net Machine is started manually and switches off automatically after the set time. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Kondisi: baik (bekas), Good, used condition Main motor: 11 kW Gsdpfx Aet Hxudja Doud Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Kondisi: baik (bekas), Technical Data: Briquetting Press RUF RB 440 Pressing capacity when processing wood: up to a maximum of 440 kg/h Material moisture content: maximum 15% Motor power: approx. 30 kW Briquette size, rectangular: 150 x 60 mm Length: 40 – 110 mm Gujdet H D Ezepfx Aa Dod Dimensions (approx.): 1680 x 1800 x 2000 mm Weight: 3000 kg

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. Gjdsgfm Ryspfx Aa Doud The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Gsdpjd N Dnhofx Aa Deud

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Guodpfx Aaeffh Ato Djd Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: baik (bekas), Used, good condition. Technically inspected used machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (for example for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optional production of short briquette tablets possible Technical data: Throughput rate up to max. 750 kg/h (depending on material) (e.g. sawdust with a bulk density of 250 kg/m³) An exact statement on throughput can only be made after testing with your material, as this may vary significantly depending on bulk density. Customs tariff number: 84793010 Briquette diameter: 65 mm including 2 m press channel Main motor power: 37 kW Feed screw gear motor: 2.2 kW Compactor screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with operating hour counter in switch cabinet Machine bears CE mark Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3800 kg Gsdpsfmqq Eofx Aa Djud Options at extra cost: Temperature control unit for press tools For maintaining optimal temperature and briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch. Wired ready for operation – essential for functionality including corresponding control system + €7,850 net Guillotine or tablet breaker, For cutting briquettes to length + €6,900 net Connection to compressed air required! Silo for MAP series + €19,940 net – Storage silo above machine – Capacity approx. 6 m³, robust steel construction with agitator discharge and level indicator. Transport pipe / cooling section (nominal size: 4x2m) Every 2 meters €990 net Assembly / commissioning (nominal: approx. 2–3 days on site) Billed by time and material. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Saturday/night hours: 50% surcharge Sunday and holiday hours: 100% surcharge Per diem per technician: depending on country Per car/van and driven kilometer: €0.98 / km Travel and accommodation: reimbursed based on receipts or by flat rate, borne by the client. Testing with customer material: (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for raw material: – Moisture content (atro) must be at least 6% and no more than 15% – Chip length max. 18 mm – Installation temperature: heated space, at least +5°C – Feedstock must be free of metals and mineral impurities. Damage to press tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers Godpsd Su Hxofx Aa Doud + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: baik (bekas), Data teknis: Mesin press briket dalam kondisi baik Tahun pembuatan: 2007 Uji teknis pada 06 / 2025 Briket silinder 80 mm Kapasitas hingga maksimal 150 kg/jam *hanya sekitar 3.949 jam operasi - Mesin press hidrolik: mesin briket dengan jalur keluar - Unit hidrolik: 4 kW - Tekanan: maks 300 bar - Dimensi transportasi: 1585/2140/H1940 mm - Berat: 1.370 kg Gusdpfx Aswtdk Tja Dod Jaminan fungsi saat penyerahan Silakan menghubungi kami untuk uji coba gratis!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 29 h, Another machine immediately available ex works from Neckartailfingen *Interim sale expressly reserved *Silo available at additional cost Press only available when ordered with a system component - such as a shredder, cutting mill, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction unit RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette vendors. Type Classic – throughput up to 425 kg/h *depending on material Options (subject to additional charge): plant engineering / mütek system technology: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary airlock - Screw conveyors - Silos - All types of control system integrations - Semi-automatic packaging equipment Your benefits: Key point: + Highly established, mature matrix press thanks to 25 years of experience. The challenge and expertise are in the details, e.g., top-quality installed valves and cylinder seals. Guedpjfhql Tjfx Aa Dod + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data – Briquetting press: Throughput capacity: up to 425 kg/h* *depending on bulk density of your input material *based on 200 kg per cubic meter bulk density Detailed information after successful testing with your material. If test material cannot be provided, we cannot guarantee briquette quality or throughput capacity. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compactor Hydraulic main compactor Pressing force: approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual operation for all cylinders Control cabinet "dust-protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - The moisture content (atro) must be at least 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient installation temperature: min. +8°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may result.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net Gedpjd Nnwlofx Aa Dsud The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: baik (bekas), Overhauled used machine *Optional features available at extra cost, see below with full 1-year warranty Ready for delivery approx. 16 weeks after order Technical specifications: Throughput rate up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Includes 2 m press channel Main motor power: 45 kW Feed auger geared motor: 2 x 2.2 kW Compactor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and utilization display for main drive and feed screws Siemens S7/300 PLC control with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 4,500 kg Options: Silo for MAP series (suitable only for one MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT -Temperature control unit for press tools To maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch Fully wired and ready for connection — essential for operation including corresponding control unit €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT -Transport line / cooling section (nominal: 4 x 2 m) Gujdpfx Aaj E Dque Dod Per 2 meters: €990 net Assembly / commissioning (nominal per press: approx. 2–3 days on site) Charged according to actual time; invoiced separately. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Surcharge for overtime: +25% Saturday and night hours: +50% surcharge each Sunday and holiday hours: +100% surcharge each Daily allowance per technician per day: country-dependent Per car/van and driven kilometer: €0.98/km Travel and accommodation billed at cost or by flat rate to the customer’s account. Testing with customer’s own material: (by agreement, up to max. 750 kg) — flat rate €1,970 net ---- Requirements for raw material: - Moisture content (atro) must be at least 6% and max. 18% - Maximum chip length: 20 mm - Installation temperature: heated room, minimum +5°C - The feed must be free from metal and mineral contaminants. Damage to the press tools and/or increased wear may result.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Kondisi bekas yang baik Jam operasi rendah (1675 jam). Motor: 11 kW Tekanan: dapat diatur hingga maksimal 250 bar Kapasitas aliran hingga maksimal 220 kg/jam Briket: 150x60 mm Gsdpfx Aswcc D Rja Deud Dimensi mesin press: sekitar 2200x3000x1920 mm (PxLxT) Dimensi panel kontrol: 500x1250x2120 mm (PxLxT) Berat sekitar 3000 kg

Kondisi: bekas, CNC press brake FASTI type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Pressing force: 125 tons Working length: 3050 mm Stroke: approx. 335 mm Frame throat: 300 mm Clearance between side frames: 2550 mm Max. tool installation height: 465 mm (maximum opening width between tool holders) Table width: 90 mm (clamping system mounted on table) Table height above floor: 875 mm (910 mm with clamping system) Backgauge X-axis: 500 mm Backgauge R-axis: 115 mm Backgauge Z-axis: approx. 1950 mm Y-axis approach speed (rapid traverse): 90 mm/s Y-axis working speed: 8.9 mm/s Y-axis return speed: 75 mm/s Oil capacity: approx. 160 liters Motor power: 18.5 kW Power supply: 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for backgauge - backgauge depth (X-axis) - 2 axes for backgauge - stop height (Finger R1 + Finger R2) - 2 axes for backgauge - stop fingers, laterally movable (Finger Z1 + Finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electrical foot switch and two-hand control panel or two-hand control panel only - Hydraulic tool clamping system for upper tool (TRUMPF system), with 20 mm clamping groove - Hydraulic tool clamping for lower tool with 13 mm table slot, depth 21 mm (tool shank 13 x 20 mm) - FIESSLER safety light curtain, type AKAS - 2 material support arms at front, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, and control user manual included - Control cabinet attached to machine - Sold without tooling Space requirement (L x W x H): 5000 x 2500 x 3050 mm Transport dimensions (L x W x H): 5200 x 1900 x 2950 mm Weight: 8.5 tons Godpfx Aaohmmfko Doud In good condition

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 10.367 h, Fungsionalitas: berfungsi sepenuhnya, RUF LIGNUM R2 Brikettieranlage zum Verkauf in ausgezeichnetem technischen Zustand. Die Maschine verfügt über eine geringe Betriebsstundenanzahl und ist sofort einsatzbereit. Es sind keine zusätzlichen Investitionen erforderlich. Eine ideale Lösung für Unternehmen, die die Brikettproduktion schnell starten oder erweitern möchten. GRUNDINFORMATIONEN: Modell: RUF LIGNUM R2 Baujahr: 2021 Gusdpfx Aajzapdds Dsd Betriebsstunden: 10.367 h Linksausführung — Materialzufuhr von der linken Seite Zustand: ausgezeichnet, voll funktionsfähig Verfügbarkeit: sofort verfügbar ab Estland, Saaremaa. HAUPTTECHNISCHE DATEN: Leistung: bis zu 570 kg/h Hauptmotor: 22 kW Pressdruck: bis zu 300 bar Siemens SPS-Steuerungssystem Maschinenmaße (L × B × H): 2900 × 2000 × 2100 mm Maschinengewicht: 3.800 kg Brikettmaße: 150 × 60 mm Erforderlicher Materialfeuchtigkeitsgehalt: bis zu 15 % IM LIEFERUMFANG ENTHALTEN: Materialeinfüllbunker Vorkompressionssystem 45° Brikettauswurfschacht Anschluss für Absauganlage Vollständige Dokumentation VORTEILE: Energiesparendes RUF Pressenmodell Heizung des Hydrauliköltanks und Schaltschrankheizung für den Betrieb in unbeheizten Produktionsstätten Für den Dauerbetrieb (24/7) geeignet Niedrige Betriebs- und Wartungskosten Für verschiedene Arten von Holzabfällen geeignet PREIS: 50.000 € zzgl. MwSt.

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), hu-lt-20240620-1 Guodpjxm U S Ssfx Aa Djd

Kondisi: bekas, Tahun pembuatan: 2010, lebar total: 2.080 mm, tinggi total: 1.900 mm, panjang total: 2.440 mm, Brikettpresse_2010_Hoecker_Polytechnik Gedpfx Aajxqdxco Dsud

Kondisi: bekas, Tahun pembuatan: 2012, lebar total: 1.700 mm, tinggi total: 1.500 mm, panjang total: 1.200 mm, 001 Godpfsyy Rt Usx Aa Dsud

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: fungsi terbatas, gaya potong: 800 t, berat kosong: 190.000 kg, jenis arus masuk: tiga fasa, fi Guedeh T Dctjpfx Aa Djd

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 76 / 2011, diameter briket: 75 mm, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tegangan masuk: 380 V, We offer a COMAFER DIN 250 briquetting press in good condition, year of manufacture: 2011. Features: - Cylinder with closed-circuit oil cooling and cooler - Capacity: 100–250 kg/h, depending on material - Briquette diameter: 75 mm - Cylindrical casing (ø1200) with inspection door - Additional ring (sleeve) ø1200 / h930 - Pressing force approx. 1100 kg/cm² - 2 cylinders; briquette cylinder ø 200 mm - Pump motor (11 kW / 15 HP, 380 V, 50 Hz) - Monoblock, self-centering, round vice without clamping rods - Electrical control panel with PLC, automatic and manual cycle - Shutdown mechanism with open vice and vice pressure gauge - Digital thermostat for oil temperature control, level switch to prevent oil leakage - Closed-circuit oil cooler system (air/oil) - Closed-circuit cooling for chuck (580 mm x 550 mm x 908, weight 56 kg) Gusdpfoy Uihaox Aa Djd - Tapping head for long briquettes, uniform briquette length, CE compliant - Dimensions: 2100 mm x 1350 mm x 1540 mm (height), weight: 1600 kg If you have any questions or need further information, please send us a message. Telephone information available in Hungarian only.