Beli Kellenberger Rundschleifmaschine 1000U bekas (132)

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL REFURBISHMENT: -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology Lsdpfx Aouxfu Njl Noad -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece...

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm Laedpfx Aljv Dxxzj Nod Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight approx. 3 t High-End Kellenberger 1500U Lsdpfx Alst Ii Rro Noad Ideal for spindle manufacturers or spindle overhaul specialists - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when in position A quantum leap in safety technology - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of spindle speeds - Swivel angle display – upper table - Swivel angle display – wheel head - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine has already been delivered. An identical machine can be assembled with additional options. At present, the machine does not comply with the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The determination of the necessary minimum protective measures must be established through a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Laodpfx Aljd Ih D Ej Ned Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, en-001 Laedpfxsd Ih Egj Al Nsd

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Lajdevq R Uzjpfx Al Nod Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Ledpevdk N Eofx Al Nead Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Laodpfx Alouxfuce Nod Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with partially different options. Fanuc 21i control system - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing Laodpot Ii Nbsfx Al Ned - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment - Fine adjustment upper slide - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left grinding wheel 600 mm Grinding spindle headstock fixed, not swivelling. Lajdpet Ii Rfofx Al Nod Equipped with new FAGOR control system and BEMA cylindrical grinding interface. Fitted with a new, maintenance-friendly enclosure. Completely overhauled according to Kellenberger inspection protocol.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Lsdpjuxfupsfx Al Njad Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine_01 Lodexyadaepfx Al Noad

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding Wheel Head Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. Newly painted. Workpiece Headstock Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of belts. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, and overhauled. Hydraulics Disassembly, motor inspection, replacement of hoses, defective and worn parts replaced. Hydraulic block inspected. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, tables ground. Z-Axis Disassembly, tables ground, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical Cabinet Comprehensive inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer’s protocol. Inspection and cleaning of various accessories Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal centres distance: 600 mm Maximum centres distance (with extended headstock): 750 mm Centre height, standard: 125 mm Centre height with interchangeable headstock/follow rest shoes: 175 – 250 mm Lodpfx Aljw U Ry Ns Noad Maximum workpiece diameter (at 125 mm centre height): 250 mm Maximum workpiece diameter with interchangeable shoes: 350 – 500 mm Table swivel range, each direction: 10° Maximum surface grinding length (max. width = 200 mm): 900 mm Table speed, stepless hydraulic adjustment: 0 – 6 m/min approx. Table reversal delay: 0 – 5 sec Grinding wheel for external grinding, diameter-width-bore: 400 x 50 x 127 mm Grinding wheel for surface grinding: 250 x 13 x 76 mm Grinding spindle speed: 1500/1700/2200/3600 rpm Grinding wheel head swivel range: 270° With index positions every: 90° Vertical movement of grinding wheel head, centre height: 125–350 mm Transversal travel of grinding wheel head: 285 mm Hydraulic rapid feed and retract travel: 40 mm Intermittent infeed of grinding wheel by table reversal: 0.001–0.03 mm/dia Continuous plunge grinding infeed: 0–0.9 mm/dia Micrometer stop for infeed, per increment: 0.001 mm/dia Workhead swivel range: 360° Workhead spindle speed, stepless variable, normal/special speed: 20–400 / 10–400 rpm Workhead / tailstock internal taper: Morse 5 / 3 Grinding wheel head motor, approx.: 4 HP All technical details provided without responsibility for errors or omissions.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1845/455, en-GB Laodpfx Aext Ilfsl Nsd

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance between workpiece headstock and tailstock, extended: 750 mm Standard centre height: 125 mm Centre height using interchangeable intermediate plates, workpiece spindle and tailstock: 175 ⇒ 250 mm Maximum possible swing diameter (at 125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 ⇒ 500 mm Worktable swivelling range, both sides: 10° each Maximum length for surface grinding (table width = 200 mm): 900 mm Table speed, hydraulically stepless adjustable: approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270° Lsdpfx Alod Amife Nead With locking positions every: 90° Vertical movement of grinding spindle head, centre height: 125–350 mm Cross travel of grinding slide: 285 mm Hydraulic rapid traverse and return of grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev Infeed for plunge grinding: 0–0.9 mm/rev Micro-stop for feed per division: 0.001 mm/rev Swivelling range of workpiece headstock: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Inner taper, workpiece spindle/tailstock: Morse 5/3 Grinding spindle motor, approx.: 4 HP Errors or omissions excepted. The technical data is provided without obligation. Inventory No. 2170089, List of machine accessories: 1 Workpiece headstock MK5 1 Sine ruler without comparator 1 Grinding spindle head with 4 drive pulleys 1 Tailstock MK3 1 Collet draw bar with extractor and reducing sleeve B32 1 Internal grinding attachment with quill Fischer UJ50x250 – Drive pulley Ø 48 for 14,000 rpm 1 Rotatable wheel dressing attachment with 50 mm base 1 Table rotation stop without comparator 1 Coolant unit with decanting system 1 Ejector 1 Balancing bar

Kondisi: siap digunakan (bekas), An older Kellenberger precision cylindrical grinding machine including accessories is available. Centre distance: 200 mm, centre height: 125 mm, maximum workpiece weight: 3 kg, maximum workpiece diameter: 245 mm, maximum workpiece length: 130 mm. On-site inspection is possible. Laedow Edpgspfx Al Nod

Kondisi: siap digunakan (bekas), aussenrundschleifmaschine-kellenberger-angebot Ljdpfjxxzi Iex Al Nead

Kondisi: bekas, specs-001 Lsdpfexmg Ekex Al Noad

Kondisi: baik (bekas), Jarak antara pusat: 1000 mm Lsdetrgn Tspfx Al Nead Tinggi pusat: 175 mm Merek CNC: FANUC Model CNC: Oi-TD

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, MAZAK QUICK TURN 250MY 1000U Diameter pemesinan maks.: 380 mm Panjang pemesinan maks.: 991 mm Kecepatan milling maks.: 5.000 rpm Kecepatan spindle maks.: 4.000 rpm Diameter batang maks.: 80 mm Mesin dilengkapi dengan: - Kontrol CNC Mazatrol SmoothG - Chuck tiga rahang KITAGAWA BB-210, diameter 254 mm - Tool Eye - Sumbu C Ljdpfxeyllrnj Al Noad - Sumbu Y - Tailstock NC - Pompa pendingin dengan daya tinggi - Konveyor serpihan - 8 buah dudukan alat tetap - 2 buah dudukan alat berputar

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Hydraulically operated precision plunge grinding machines Rollomatic. Grinding process: cylindrical plunge grinding; workpiece diameter range: 0.2mm–6.35mm; shank diameter range: 1mm–6.35mm; total workpiece length range: 30mm–60mm; grinding wheel diameter: 200mm; grinding spindle speed: 6000 rpm; workpiece speed: 800 rpm. Machine dimensions (X/Y/Z): approx. 1100mm/800mm/1300mm; weight: approx. 600kg. Includes spare parts. Documentation available. Laodpfxsw Dfd Nj Al Nod

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, de_to_hu Ledeychhtopfx Al Noad

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, RINCIAN TEKNIS - Jarak antara senter: 1000 [mm] - Tinggi senter: 125 [mm] - Orientasi meja: -/+ 8 [°] - Kepala gerinda universal - Dimensi batu gerinda: 400 x 50 x 127 [mm] - Daya motor: 3 [kW] - Kecepatan spindle: 1500 / 1700 / 2200 - Orientasi dudukan batu gerinda: 270 [°] (3 x 90°) Lajdpfx Alexphcie Nod Kepala utama - Lubang bor untuk spindle internal: 90 [mm] - Orientasi kepala penahan benda kerja: 180 [°] - Kecepatan putar spindle: 20 - 400 [Rpm] - Konus internal spindle: Morse 5 - Daya motor: 0,9 [kW] - Konus internal tailstock: Morse 4 - Panjang gerak sleeve tailstock: 30 [mm] - Dimensi: 2860 x 1680 x 1670 [mm] - Berat: 2 500 [kg]

Kondisi: baru, Kami menawarkan suku cadang segala jenis untuk mesin gerinda silindris konvensional atau CNC Karstens/GP Anda, meliputi center steady, headstock, spindel kepala penggerinda, ball screw, penggaris kaca, flensa roda gerinda, motor penggerak, penggerak sumbu (BOSCH SIEMENS), bellow pelindung, bantalan, unit kontrol pemakanan K11/K21 baru dan bekas, serta blok switching poros Z untuk pertukaran... Cocok juga untuk Weiss, EMAG, mesin gerinda silindris GP, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna. Lodpferaibvsx Al Nead

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, M024 — Wittmann Battenfeld Wittmann Battenfeld smart power 350/1000* (-) 📐 *Clamp Unit* • Clamping force: 350 t • Embossing: YES • Max. mould weight: - kg • Max. mould weight per platen: - kg • Tie bar spacing (W x H): 800x720 mm • Min. mould height: 400 mm • Max. mould height: - mm • Max. opening stroke: 1240 mm • Centring ring FIX / MOVE: 160 / 160 mm • Quick clamping system: NO 🔌 *Mould Interface* Ljdpoy Tn Dwefx Al Nead • Heating zones: 12 (24-pin combined connector TC/PW (6 zones per connector)) • Water cooling circuits: 8+6 • Hydraulic circuits (cores): 1+1 • Hydraulic hot runner valve gates (nozzles): x • Pneumatic hot runner valve gates: x 💉 *Injection Unit* • Screw diameter: 45 mm • Nozzle face + thread: R??+M24x1.6 • Injection unit type: 1000 • Screw stroke: - mm • Max. injection volume: - cm³ • Max. injection pressure: 2480 bar • Max. injection rate: 280 cm³/s • Accumulator SW / HW: NO / NO ⚡ *Electrics / Robot* • Ejector: YES • Sockets 400 V/16 A: 7 • Sockets 400 V/32 A: 4 • Sockets 400 V/63 A: 0 • Robot type: Linear • Quick-change gripper: WGS-QLRD Midi • Vacuum connections: 6 • Air pressure connections: 5 • User inputs/outputs: 0 / 0