Beli Kraussmaffei 50-90 C1 bekas (44.673)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, diameter sekrup: 40 mm, volume langkah: 217 cm³, tekanan injeksi: 2.377 batang, lintasan ejektor: 150 mm, langkah pembukaan: 600 mm, panjang total: 4.480 mm, lebar total: 1.510 mm, tinggi total: 2.190 mm, berat keseluruhan: 6.000 kg, daya: 18,5 kW (25,15 hp), Perlengkapan: dokumentasi / manual, Dalam kondisi sempurna. Gijdpfx Ajwlhb Tshbew

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine Clamping force (kN): 6500 Distance between tie bars (h x v) (mm): 1110 x 960 Mold opening stroke (mm): 1450 Min. mold height (mm): 450 Max. mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (HPS-M mixing) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Control version: MC5 Screen language: German Condition: Tested, fully operational Features: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen Gedpey Apdqjfx Ahbeiw - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend graphics - PV regulation - Production data interface consisting of 5 potential-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei LRX 350 Linear Robot: - Fully integrated control system - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines on an ongoing basis. Year of manufacture: 2010 We have been a wholesaler of used injection moulding machines for over 25 years. Current notice – Tax benefit for used machines: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control system: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Equipment / Extras: - 2 x core pull (movable core pull, fixed core pull) - Pneumatic valve 1 on moving platen - Accumulator for increased injection capacity - Fast SK demounting CX Midrange - Ejection of cold sprue - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard - Graphic analysis and maintenance notifications - Electronic coding of injection unit - Pneumatic valve at fixed platen for air blast - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target vs. actual - PV control Giedpexqhuujfx Ahbjw - Active backpressure regulation - From first ownership – origin Germany - Maintained regularly by manufacturer and previous owner Clamping unit: Clamping force: 2500 kN / 250 tonnes Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Maximum daylight: 820 mm Minimum mould height: 330 mm Maximum opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation (manual, software) Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately. The machine is offered fully tested and functional. The machine is our exclusive property. The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power. About our company and equipment offered: - We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse - All offered machines are inspected and tested before disassembly - We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines - All offered machines come from successful businesses where maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 47.137 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61020607, gaya penjepit: 1.300 kN, jarak antara tiang: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax notice and benefit for used machinery: As of July 1, 2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Gijdoyf Uy Uepfx Ahbow Keyword: Growth booster (Section 7 (2) EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower, 2-color, 2-component machine Control: MC6 Year: 2014 Machine No.: 61020507 Operating hours: 47,137 h Complete service record for the past 7 years / 25,000 h of operation 1st injection unit 750 horizontal Injection unit/screw: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd injection unit 180 vertical Injection unit/screw: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2500 bar Clamping unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. platen spacing: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – Full machine data sheet attached as PDF Nozzle side: needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Water circuit BGS: 6 zones each on nozzle and ejector side BluePower technology – up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripherals shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck, or free delivery to location against reimbursement of freight costs. Information about the company and our machines: - We only sell machines purchased from running production, stored at our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All offered machines come from successful companies where maintenance and care are standard practice - All available machines can be viewed in our warehouse.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force 1600 kN Max. tool opening force 87 kN Moving platen opening force 45 kN Moving platen closing force 38 kN Clamping platen (H x V) 820 x 845 mm Clear distance between tie bars (H x V) 520 x 520 mm Mold opening stroke 650 mm Min. mold installation height 300 mm Maximum opening stroke 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection Unit: Screw diameter 50 mm L/D ratio 20 Injection pressure 1892 bar Shot volume 393 ccm Shot weight (PS) 358 g Injection flow rate 177 ccm/s Screw speed 265 rpm Plasticizing rate 36.2 g/s Nozzle contact force 50 kN Electrohydraulic Equipment: Rated power of pump motor 22 kW Installed heating capacity 16 kW Number of heating zones (barrel) 5 Oil capacity 489 liters Dimensions and Weights: Floor space approx. 5.50 x 2.00 x 2.20 m Total weight 8200 kg Max. mold weight 1862 kg Accessories: - Vibration-damping elements - BluePower servo pump drive Additional Equipment: - 1 x air valve Gjdpfx Ahjy Nlb Sobjiw - 8 x hot runner controllers - 2 x core pulls on moving platen - 2 x core pulls on fixed platen - Robot interface to Euromap 67

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 69.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, diameter sekrup: 45 mm, Dijual mesin injeksi merek KraussMaffei tipe KM 125-700C2. Mesin dalam kondisi fungsional penuh dan masih beroperasi hingga akhir-akhir ini. Data teknis: Tahun pembuatan: 2000 Jam operasional: 69.000 jam Gaya penutup: 125 t Diameter silinder: 45 mm Katup jarum: Pneumatik Penarik inti: 2x hidrolik Gjdpfx Aex Ituqehbsiw Sensor tekanan internal

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.961 kN, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Gaya penguncian: 200 t Gedpfx Ahoy Exdlsbjiw Jarak antar tie-bar: 560 x 560 mm Diameter screw (komponen pertama): 60 mm Diameter screw (komponen kedua): 35 mm Berat injeksi (komponen pertama): 566 g Berat injeksi (komponen kedua): 178 g PERLENGKAPAN Sistem dua komponen Sistem Kraussmaffei Multinject Catatan: Jika Anda membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), biaya pembongkaran dan pemuatan yang lebih rendah akan diberlakukan.

Kondisi: baik (bekas), Tahun pembuatan: 2002, gaya penjepit: 1.100 kN, Produsen: KraussMaffei Kunststofftechnik München Model: KM 110-390 C2 Nomor Mesin: 1141268 Nomor Pesanan: 646749/1 Tahun Pembuatan: 2002 Gaya Penutupan: 1100 kN Gaya Penutupan: 110 t Penandaan Ukuran Internasional: 390 C2 / 110 Ukuran Satuan Injeksi: 390 Tegangan Operasi: 400 V Fase: 3 Frekuensi: 50 Hz Arus Total: 164 A Sekering Utama: 200 A Arus Motor: 37 A Giodpfx Ahoytipajbow Berat Mesin: 5800 kg Lokasi: Freiburg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, jam operasional: 35.000 h, Fungsionalitas: berfungsi sepenuhnya, Krauss-Maffei KM 1150/4300 MX Mesin Injeksi Horizontal dari Krauss-Maffei dengan gaya penutupan 1150 ton. Tahun pembuatan 2014. Jam kerja: 35.640. Kontrol MC6. Fitur tambahan: Robot ABB 6 sumbu, 24 zona Hot Runner, sekuensial 10 pneumatik + 10 hidrolik. Dapat diperlihatkan dalam produksi. Rincian Teknis GAYA PENUTUPAN: 11500 kN JAM KERJA: 35.600 DIAMETER SEKRUP: 90 mm TEKANAN INJEKSI: 1839 BAR Gjdpfxoy Efkrj Ahbjiw VOLUME INJEKSI: 2290 cm3 BERAT INJEKSI: 2084 gr LANGKAH PEMBUKAAN: 2000 mm DIMENSI PLATEN: 2210 x 1910 mm KETEBALAN CETAKAN MINIMUM: 600/1200 mm TAHUN PEMBUATAN: 2014

Kondisi: bekas, Krauss Maffei mainboard Gsdpju Axihsfx Ahbsiw

Kondisi: bekas, Tahun pembuatan: 2003, gaya penjepit: 1.500 kN, Perlengkapan: dokumentasi / manual, spritzgiessmaschine-km-150-700-c2 Gedsyfm Ahjpfx Ahbsiw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 28.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, manufactured by KraussMaffei, model KM 130-750 CX. The machine is in excellent condition, immediately operational, and has low operating hours. It features an electronic injection and dosing unit, along with a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2*50 mm additionally) Core pull: 1*Hydraulic Needle shut-off: Pneumatic Tie bar extension: 160 mm Cavity pressure sensor Selector valve Transport and loading can be organized Europe-wide upon request and for an additional charge. All prices are subject to VAT. Inspection possible by appointment. Contact us—our team will be glad to assist you. Gijdpfxsu Hxm Us Ahbow Trade-in or exchange possible! Machinery Buying & Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: Gedpfx Ahjyv E Nvsbjiw - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, wtryskarka-krauss-maffei-km-800-5000-mc Giedpfx Ajxqh I Iohbow

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, de-maschine-1 Giedpfx Ahex Tbfuobow

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Screw diameter: 90 mm Giodpfx Ahstunccjbsw Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Machine weight approx.: 32 t From series production

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 6.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61033935, gaya penjepit: 4.500 kN, Perlengkapan: dokumentasi / manual, Robot Krauss Maffei LRX 250 Detailed specification available in the attached file. Giedpfx Ajw Dcppohbjw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 90 mm, jarak antara tiang: 1.000 mm, tekanan injeksi: 1.742 batang, langkah pembukaan: 2.000 mm, RINCIAN TEKNIS Gaya penutup: 8.000 kN Gaya pembuka cetakan maksimal: 356 kN Gaya dorong pelat pembuka bergerak: 98 kN Gaya pelat penutup bergerak: 92 kN Ukuran pelat (T x L): 1.610 mm x 1.530 mm Jarak antara kolom (T x L): 1.120 mm x 1.000 mm Gisdpfoxup Nnsx Ahbjw Jarak pembukaan cetakan: 1.400 mm Tinggi cetakan minimum: 600 mm Pembukaan maksimum: 2.000 mm Langkah ejektor hidrolik: 250 mm Diameter sekrup: 90 mm Rasio L/D: 23 Tekanan injeksi: 1.742 bar Volume injeksi: 2.863 cm³ Berat tembakan (PS): 2.605 g RINCIAN MESIN Dimensi & Berat Dimensi (P x L x T): 10.500 x 2.860 x 2.890 mm Berat: 43.000 kg Jam operasional: 70.000 jam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 120 mm, lintasan ejektor: 300 mm, langkah pembukaan: 1.900 mm, DETAIL TEKNIS Gaya penutup: 9.500 kN Gaya buka: 665 kN Jarak antar pilar: 1.400 x 1.150 mm Pelat penjepit: 1.960 x 1.710 mm Stroke pembukaan: 1.900 mm Tinggi cetakan minimum: 500 mm Tinggi cetakan maksimum: 1.200 mm Lebar pembukaan maksimum: 2.400 mm Stroke ejector: 300 mm Sekrup berkapasitas tinggi HPS-UN, diameter: 120 mm Giedpfx Ahexup Sisbjw Radius nosel: 30 mm Bukaan nosel: 12 mm Diameter sekrup: 120 mm Berat tembakan (HDPE): 5.420 g Volume tembakan: 7.634 cm³ Tekanan injeksi spesifik: 2.257 bar DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 12.770 x 3.420 x 2.750 mm Berat mesin: 61,5 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and built-in USB ports. Plasticising Unit 1 complete HPS-UN plasticising unit for thermoplastics: - screw diameter: 50 mm - check valve, open nozzle - nozzle radius: 10 mm - nozzle orifice: 4 mm Technical Specifications Gjdpfex Thzpsx Ahbjiw Clamping Unit - Clamping force: 1,600 kN - Mold opening force: 86.4 kN - Movable platen force: - opening: 44.8 kN - closing: 37.8 kN - Platen dimensions (H × V): 820 × 845 mm - Tie bar clearance (H × V): 520 × 520 mm - Mold opening stroke: 650 mm - Mold height: 300 mm - Platen opening stroke: 950 mm - Ejector stroke: 150 mm - Ejector force: 22.6 / 9.9 kN Injection Unit - Screw diameter: 50 mm - Injection pressure: 1,892 bar - Shot volume: 393 cm³ - Shot weight (PS): 357 g - Screw speed (std/opt): 390 / 490 rpm Electrical and Hydraulic Equipment - Rated pump motor power: 22 kW - Installed heating capacity: 10.97 kW - Number of barrel heating zones: 5 - Dry cycles (Euromap): 1,600 1/h - Oil tank capacity: 489 l Dimensions & Weight - Net weight with control cabinet: 6.0 t - Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control with colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mould opening stroke: 600 mm Mould height (installation): 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical-Hydraulic Equipment Rated pump motor power: 22 kW Installed heater capacity: 15.62 kW Godpox Avhysfx Ahbjiw Number of cylinder heating zones: 5 Number of dry cycles (EUROMAP): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture – 2004 System: Fully hydraulic Control: MC4, colour monitor, integrated control panel, built-in disk station 2. Plasticising unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Gisdpfx Ajx Elukshbsw Mould installation height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard screw speed: 108 g/s Output at increased screw speed: 141 g/s Electro-hydraulic equipment Pump motor power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, jam operasional: 27.000 h, gaya penjepit: 6.500 kN, Krauss Maffei KM650-3500 C2 injection molding machine for sale The machine is in very good condition, having only been operated in single-shift production for small batch and sample runs. A new hydraulic pump was installed recently (approx. 300 operating hours). - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and linear guides show no damage, like new - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic barrel Gsdpeyn Sc Eofx Ahbsiw - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Powered inspection possible. Further accessories such as Motan dryer, chiller unit and more available upon request. The machine can be dismantled and loaded by us by arrangement. We look forward to your inquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120 Gsdeuggb Djpfx Ahbjiw  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package Gjdpfx Ahow U N Ixjboiw - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.