Beli Loire Safe Mesin Press Hidrolik 2000 Ton bekas (86.729)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, gaya penekanan: 5 t, kecepatan operasi: 300 mm/dtk, lebar meja: 450 mm, panjang meja: 320 mm, kedalaman tenggorokan: 180 mm, kapasitas tangki oli: 9 l, berat keseluruhan: 270 kg, Hydraulic Press Atsugi AP-5-KL Load Capacity Range: 20-50 kN Stroke (mm): 150 Descent Speed (approach speed): 350 mm/s Operating Speed (slow speed under pressure): 36 mm/s Return Speed: 250 mm/s Ready for operation Working Area Open Height: 250 mm Open Depth: 180 mm Table Size: 450 x 50 mm Motor Specification: 3-phase AC 200V, 4-pole, 1.5 kW Two-hand operation Mobile worktable Hydraulic Oil/Quantity: Daphni Hydraulic 46 / 9L Gusdpevbdpysfx Aazef Total Weight (kg): 270 Dimensions Height (mm): 986 Width (mm): 485 Depth (mm): 920

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 3 t, Perlengkapan: penghadang cahaya keselamatan, For sale: As-new HYUNDAE CETTA HHP-3 hydraulic press "Multiple units available" Manufacturer: HYUNDAE (Korea) Model: HHP-3 Year of manufacture: 2018 Load range: 1–3 tons Stroke [mm]: 150 Working height: 250 mm Safety light curtain Two-hand operation Movable worktable Hyundae press control system Ram closing speed: 178 mm/s Ram pressing speed: 54 mm/s Opening speed: 79 mm/s Table size: 450 x 360 mm Max. working pressure: 60 kg·f/m² Hydraulic motor: 1.5 kW, 3-phase/4-pole, 200 V Weight: 350 kg Machine height (without table): 1415 mm Machine length: 950 mm Machine width: approx. 700 mm Gjdpfx Ajvbd U Aeazeuf Worktable with rollers or leveling screws

Kondisi: baik (bekas), Tahun pembuatan: 1971, gaya penekanan: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Operation: Oil-hydraulic Table height: 1,175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid downstroke speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrical system: 550 V / 60 Hz Specifications subject to confirmation Gsdpfswxw Amox Aazsuf

Kondisi: baik (bekas), 1 used down-stroke press Gedpfx Aoul U Svsazjuf Manufacturer: SACK & KIESSELBACH Year of manufacture: 1962/74 Serial number: 31900 Pressing force: 630 t Stroke: 310 mm Shut height: 320 mm Working height: 1200 mm Drive power: 10 kW

Kondisi: bekas, Tahun pembuatan: 1952, Type of machine: Punch Press Manufacturer: Gusdpswxw H Esfx Aazsf SACK&KIESSELBACH Model: EP500 Year of manufacture: 1952 Pressing force: 500 t Clear opening: 450 mm Location: In Germany

Kondisi: bekas, Tahun pembuatan: 1984, diameter putar di atas sled silang: 1.600 mm, diameter pembubutan: 2.000 mm, diameter pembubutan di atas alas geser: 2.000 mm, panjang pembubutan: 35.000 mm, berat benda kerja (maks.): 63.000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem design on a single bed: left headstock + right headstock Double mirror tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires servicing/replacement Motorized tailstock on each side (left and right) 3-bedway construction Torque at chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Areas of application: - Shipyards - Propeller shafts Gujdpsynky Asfx Aazof - Hydraulic cylinder shafts - Camshafts - Defense & Aeronautics - Rolls and shafts for steel mills - Crankshafts Specifications Metric / US Standard Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over cross slide: 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Spindle speed: 180 rpm Feed rate X-axis: 5,000 mm/min Feed rate Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information provided here is given to the best of our knowledge and, where possible, sourced from the manufacturer. While the information is presented in good faith, accuracy cannot be guaranteed. Accordingly, no representation or contractual obligations are implied. We recommend verifying all critical details.

Kondisi: baru, Tahun pembuatan: 2025, C-FRAME EINSTUFIGE HYDRAULIKPRESSE MODELL CFSS100 / 100 TONNEN Stößelzylinder-Kapazität (Tonnen): 100 t / 250 bar Min. Arbeitsdruck: 30 bar Max. Arbeitsdruck: 250 bar Hauptzylinderdurchmesser: Ø220 mm * 1 Stk Hilfszylinderdurchmesser: Ø50*35 mm * 2 Stk Tischgröße (mm): 800 x 500 mm Hub (mm): 400 mm Lichte Weite (mm): 500 mm Gedpfx Ajwbtihsazouf Eilgang (mm/s): 110 mm/s Rücklaufgeschwindigkeit (mm/s): 160 mm/s Arbeitshubgeschwindigkeit (mm/s): 10 mm/s Motor (kW): 11 kW Pumpe (Liter): 26 l / 19 ccm Gesamtmaße (LxBxH): 1900 x 1700 x 2930 mm Gewicht (kg): 5.500 kg

Kondisi: bekas, Pressure: 120 t Stroke: 400 mm Table surface: 1750 x 500 mm Pressing force: 120 t Working width: 1740 mm Total power requirement: 3.0 kW Machine weight approx.: 2 t Space requirement approx.: 2 x 1.0 x 1.5 m This 200-ton motorized workshop press with a movable cylinder is extremely robustly built and manufactured in the Netherlands. The hydraulic system operates with outstanding precision in both electric and manual modes. Gedpfst Hmldjx Aazsuf Equipped with: - Movable cylinder - Chrome-plated, tempered piston with detachable base - Integrated pressure gauge - Pressure regulation - Two speeds - Adjustable worktable - Joystick control for piston operation - Dual-mode hand pump for highly precise pressing operations - 220V CEE power socket at the rear of the hydraulic unit The heavy-duty worktable can be easily adjusted in height with the help of the hydraulic cylinder. The piston of this press is lowered in rapid advance mode and, when resistance is met, the press automatically switches to a slower speed.

Kondisi: bekas, Technical details: Pressure: 2.5 t Outreach: 155 mm Maximum ram stroke: 280 mm Distance table/ram: 450 mm Clamping plate on table: 260 x 1000 mm Ram approach speed: 0.08 m/s Ram return speed: 0.32 m/s Gsdpsu Nfv Usfx Aazouf Ram bore: Ø 20 x 45 mm Height above floor: 930 mm Total power requirement: 1.1 kW Machine weight approx.: 500 kg Machine dimensions approx. LxWxH: 0.85 x 1.0 x 1.7 m The machine is equipped for straightening work.

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 40 t, panjang langkah: 500 mm, lebar meja: 500 mm, panjang meja: 600 mm, kedalaman tenggorokan: 250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 40 Ton C-Frame Hydraulic Press – CHCP 40 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 40 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance in both workshops and production lines with its compact design, robust frame, and precise operating capability. Key Advantages Gjdpfxoyzb Dge Aazouf - Rigid, vibration-free frame structure - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - European standard hydraulic and electrical equipment - Long service life and low maintenance cost Applications - Metal forming - Deep drawing and flow forming operations - Cutting and punching operations - Assembly and pressing applications - Automotive and ancillary industries Standard Features - Stress-relieved steel construction frame via vibration method - PLC control and touch screen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN norms (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 40 Press Force: 40 Ton Stroke: 500 mm Throat Depth: 250 mm Table – Ram Distance: 600 mm Table Size: 500 x 600 mm Press Depth: 1050 mm Press Width: 500 mm Table Height from Floor: 850 mm Total Height: 2400 mm Main Cylinder Diameter: Ø145 mm Motor Power: 5.5 kW Weight: 4500 kg General Information Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 320 t, panjang langkah: 310 mm, kecepatan operasi: 9 mm/dtk, kecepatan mundur: 110 mm/dtk, kedalaman tenggorokan: 410 mm, jarak antara tiang: 5.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 320 Ton 6 Meter CNC Press Brake – HPB C320-6100 – New / 12-Month Warranty Press brake machines are essential equipment in sheet metal bending operations, providing high precision, repeatability, and production efficiency. Manufactured by CRONOSSTECH, the HPB C320-6100 CNC Press Brake is engineered for precise and stable processing of large-format sheets with a bending capacity of 320 tons and a bending length of 6100 mm. Key Advantages - High-precision bending over 6 meters - Advanced programming via ESA S840 CNC control unit Guodpfsyzb Ewsx Aazof - High-precision servo motorized backgauge system - Homogeneous bending with WILA crowning system - Heavy-duty frame with high stability - European origin hydraulic and electrical components Applications - Large-scale sheet metal bending - Steel construction manufacturing - Energy and infrastructure projects - Machinery and equipment production - Industrial production lines Standard Features - ESA S840 (3-6 axis) CNC control unit - 15.6” touchscreen, 2D graphics, and offline software - Automatic bending sequence and collision control - Angle measurement and automatic angle correction (crowning) - CRONOSS X+R axis servo motorized backgauge (±0.03 mm accuracy) - Hardened linear guide and ball screw system - Two adjustable backgauge fingers - Promecam quick clamping system - Eurostamp standard punch & die set - Full cover safety system - Dual foot pedal (up/down control) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic block, Eckerle pump - LED lighting, energy-saving mode - Front support arms (high-strength, adjustable) - Manual WILA crowning system Technical Specifications – HPB C320-6100 - Bending Capacity: 320 tons - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - Stroke: 310 mm - Daylight: 535 mm - Throat Depth: 410 mm - Table Height: 1065 mm - Machine Dimensions (LxWxH): 8150 x 2655 x 3170 mm - Approach Speed: 150 mm/s - Bending Speed: 9 mm/s - Return Speed: 110 mm/s - Oil Tank Capacity: 290 L - Motor Power: 22 kW - Weight: 27,000 kg General Information - Place of Manufacture: Turkey - Warranty: 12 Months - Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 200 mm, lebar meja: 1.000 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press: This is a type of mechanical press powered by force produced via an eccentric mechanism, used for cold forming operations such as punching, cutting, and forming with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in large bolster and heavy die applications due to their rigid frame design. CRONOSSTECH CEHP 200 – H Type Eccentric Press 200 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With a monoblock frame, eight-point guided slide system, hydraulic overload safety device, and automatic lubrication infrastructure, it delivers reliable performance for continuous production conditions. Key Advantages - Stable operation with large dies due to 1000×2000 mm large bolster - Die/equipment protection with hydraulic overload safety device - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety with light curtain (LEUZE) - Quick production changeovers with 99 die memory slots Areas of Use - Punching/cutting/forming operations requiring large bolster - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame structure • Pneumatic clutch–brake • T-slotted auxiliary plate • Eight-point guided slide • Adjustable stroke on single connecting rod • Slide balancer cylinder • Fully automatic precision lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse movement • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain safety barrier • Gear group in sealed oil chamber • Double solenoid safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety guard for bolster front • Custom die manufacturing ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower bolster usable area: 1000×2000 mm Upper bolster usable area: 1000×2000 mm Fixed stroke length: 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max closed die height: 600 mm Min closed die height: 480 mm Side window width: 600×600 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric/cranckshafts: 2 Safety device: Hydraulic Electrical equipment (panel): Siemens – Schneider Lubrication system: Automatic Display/PLC/Inverter: Siemens – Pilz Safety barrier: Leuze Operating modes: 4-position Die memory: 99 slots Mounting: Floor-mounted Frame type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. dimensions (L×W×H): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: If you require any modifications to the technical specifications, please let us know. Godpsx N Ruqjfx Aazsuf ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press that operates with force generated via an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses offer high stability and process safety for applications involving large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 400 – H Type Eccentric Press 400 Ton is designed for stable operation in high-volume production with a focus on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2000×1200 mm table - Die/equipment protection with hydraulic overload safety - Precision guidance with 8-guided ram + counterbalance piston - Controlled and user-friendly operation via PLC + touchscreen - Enhanced operator safety with light curtain protection Applications - Punching/cutting/forming operations requiring large tables - Mass production with automatic feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-guided ram • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorised reverse motion • Hydraulic overload safety • Motorised ram adjustment mechanism • Light curtain protection • Sealed oil tank with gear group • Double-solenoid safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material disposal systems • Sliding safety guard in front of the table • Dies built to requested specifications Gedpfsx N Rzwox Aazsuf ✅ TECHNICAL SPECIFICATIONS (CEHP 400) Capacity: 400 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 3050 mm Press Depth: 3200 mm Press Height: 4700 mm Table Dimension: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 55 kW Weight: 51,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.200 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press powered by force transmitted through an eccentric mechanism, used in cold forming operations such as punching, cutting, and shaping with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, owing to their rigid frame construction. The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it offers dependable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection with hydraulic overload safety - Precise guidance provided by 8-point guided ram + balancer piston - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety through light curtain protection Applications - Punching/cutting/forming processes requiring large tables - Mass production with automated feeding lines - Heavy die and high tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke with a single connecting rod • Balancer piston on the ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Reverse motor function • Hydraulic overload safety device • Motorized ram adjustment • Light curtain protection • Enclosed gear group in oil reservoir • Dual-coil safety valve • Compliance with CE standards Gedpfxex N R Aho Aazeuf ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety cover at the front of the table • Dies manufactured to requested specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.000 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 1000 H-Frame Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, providing maximum rigidity, precision, and long service life. The CHP 1000 model is developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered to withstand the demanding conditions of heavy industry. The frame and main supporting structures are stress-relieved using vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press body • Stress-relieved frame structure by vibration • Bronze Zr14 guide bushings • WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system Gedpfjx N T Rbox Aazouf • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination indicator • Monitoring of hydraulic unit oil temperature and system status via display • Cooling system • Off-line filtration • Two-hand control system • Light curtain (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: EN ISO 15614-1/2017 certified by TÜRK-AK for WPQR and WPS Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table - Fast Approach Speed: 150 mm/sec Moving Table - Pressing Speed: 12 mm/sec Moving Table - Return Speed: 170 mm/sec Main Cylinder Bore: Ø500 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6000 mm Approx. Press Width: 3450 mm Approx. Press Depth: 2400 mm Distance from Floor to Lower Table: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 600 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, gaya penarikan balik: 40 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses have been developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-guideway H-frame structure, maximum rigidity is achieved throughout the pressing process; parallelism and perpendicularity tolerances are maintained consistently during the entire stroke. The CHSP 100/40 model, with a main ram capacity of 100 tons and a lower cushion (pot) capacity of 40 tons, is designed for precise deep drawing and spinning operations. The frame structure is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 sliding bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, 8-guideway H-frame body - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 100 Ton - Capacity (Cushion): 40 Ton - Movable Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1:2017 (supervised by welding coordinators certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Drawing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Inner Diameter: Ø230 mm – Ck45 - Cushion Cylinder Inner Diameter: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height of Press: 3400 mm - Approx. Width of Press: 2950 mm - Approx. Depth of Press: 2000 mm - Lower Table Height from Floor: 1250 mm - Pre-Fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Screen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 9 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey. Gedpfjx N T Uysx Aazsuf

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 150 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Flanging) Press – 8 Guide Rails General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow for sheet forming, deep drawing, and flanging applications. Thanks to its 8-slider H-frame design, maximum rigidity is ensured during the pressing operation; parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke. The CHSP 400/150 model, with a 400-ton main ram and a 150-ton cushion ram (blankholder), is designed for deep drawing and flanging applications requiring high tonnage. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slide bearings - Fully certified welding applications with TÜRK-AK accredited WPQR and WPS approvals (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel Guedpfxjx N Uhhj Aazsf - Adjustable stroke control for ram and cushion - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning system - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems to ensure operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 400 Ton - Capacity (Cushion/Blankholder): 150 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. daylight: 100 mm - Max. daylight: 1100 mm - Stress relief: Vibratory stress relieving - Welding application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (Welding procedures are supervised by ‘welding coordination engineers’ certified as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø450 mm – Ck45 - Cushion Cylinder Bore: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 5600 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2200 mm - Die Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 80 t, lebar meja: 600 mm, panjang meja: 800 mm, tinggi meja: 850 mm, lubang tembus di meja: 190 mm, penyesuaian silinder hidrolik: 85 mm, penyesuaian langkah: 100 mm, Perlengkapan: penghadang cahaya keselamatan, D TYPE ECCENTRIC PRESSES – GENERAL FEATURES • Steel construction body • Stress relieving by vibration for the body and welded parts • Table parallelism and perpendicularity tolerances comply with ISO and DIN standards • Pneumatic clutch and brake combination – OMPI, Italy • Ram supported by 8 guides • Ram with cushion cylinder • Parts such as ram, connecting rod, and slide block made of GS52 steel casting • High strength monoblock crankshaft – 4140 • Bronze bushing in connecting rod (Zr14) • Rear flywheel • Supplied with spare table • Hydraulic overload protection Gedpfx Aasvxhb Uezjuf • Motorized table-to-ram adjustment • Automatic central lubrication • Pneumatic pedal with latch and dual-hand control with timer • Electric counter • PLC application and touchscreen – DELTA • Electrical switchgear by SIEMENS and SCHNEIDER • CE conformity – OPTIONAL • Finger protection light barriers – SICK, LEUZE • Safety PLC (monitors all electric systems, valves, two-hand and pedal) – PILZ • Dual-coil safety valve – GPA, TOPAIR • Position-locked limit switch and control panel • Safety block • Protective safety guards in compliance with CE directives MODEL D TYPE MONOBLOCK FRAME Capacity 80 Ton Distance Between Table and Ram 400 mm Distance Between Side Frames 880 mm Ram Adjustment 85 mm Approx. Press Width 1150 mm Approx. Press Depth 1500 mm Approx. Press Height 2500 mm Table Bore Diameter 190 mm Table Size 600 / 800 mm Die Clamping Bore Diameter 40 mm Ram Dimensions 245 / 410 mm Table Height from Floor 850 mm Stroke Adjustment 10 / 100 mm Strokes per Minute 50 spm Motor Power 7.5 kW Motor Speed 1450 RPM Approx. Weight 6,500 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, lebar meja: 720 mm, panjang meja: 1.000 mm, lubang tembus di meja: 220 mm, penyesuaian silinder hidrolik: 120 mm, penyesuaian langkah: 125 mm, Perlengkapan: penghadang cahaya keselamatan, MANUFACTURING LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE FROM STOCK GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief of the frame and welded components by vibration - Table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram with 8 slide guides - Ram cushioning cylinder - Ram, connecting rod, and clutch parts made of GS52 steel casting - High strength single piece crankshaft – 4140 Guodjvyrywepfx Aazef - Bronze insert in connecting rod (Zr14) - Rear-mounted flywheel - Spare bolster table - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication system - Pneumatic pedal with catch and dual hand control with time delay - Electrically controlled counter - PLC control with touch screen – DELTA - Electrical switchgear components: SIEMENS-SCHNEIDER - CE conformity (optional) - Finger protection light curtains – SICK, LEUZE - Safety PLC (controls all electrical system, valve, hand and foot controls) – PILZ - Dual coil safety valve – GPA, TOPAIR - Lockable position switch and panel - Safety block - Protective guards as per CE regulations TYPE: D-TYPE MONOBLOC BODY Capacity: 150 Tons Distance Table-to-Ram: 500 mm Distance Between Side Walls: 1080 mm Ram Adjustment: 120 mm Approx. Press Width: 1400 mm Approx. Press Depth: 1900 mm Approx. Press Height: 3000 mm Table Bore Diameter: 220 mm Table Size: 720 / 1000 mm Die Mounting Slot Diameter: 55 mm Ram Size: 450 / 800 mm Height Table-to-Floor: 900 mm Stroke Adjustment: 10 / 125 mm Strokes per Minute: 50 spm Motor Power: 15 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 12,000 kg

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 110 mm/dtk, tinggi meja: 955 mm, kedalaman tenggorokan: 410 mm, lebar kerja: 3.100 mm, gaya tekuk (maks.): 320 t, jarak antara penyangga: 2.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven back gauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick tool clamping system • Sliding front support system • Manual crowning system (Original WILA wedge) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Rear gauge expansion from X+R to 4-6-8 axis options • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-channel die • Rear gauge X-axis up to 1000 mm • AKAS or DSP laser beam front safety system • Additional back gauge fingers • Additional back gauge supports TECHNICAL SPECIFICATION VALUE Bending Force (Tons) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (Lower-Upper Jaw Gap) (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank (L) 290 Machine Weight (kg) 14700 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Back Gauge X (mm) 750 Gjdex Nn Eaepfx Aazjuf Back Gauge R (mm) 250 Crowning Manual (WILA wedge) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, daya: 5,5 kW (7,48 hp), gaya penekanan: 80 t, lebar meja: 660 mm, panjang meja: 860 mm, gaya punching: 80 t, lubang tembus di meja: 180 mm, penyesuaian langkah: 110 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press: This is a type of mechanical press powered by force generated through an eccentric mechanism used in cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. The rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for continuous production. Key Advantages - Stable stroke performance and high repeatability in mass production Gjdpfxovtx H Ro Aazeuf - Operator safety-focused design (light curtain + safety systems) - Low maintenance with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Applications - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double coil safety valve • Manually adjustable stroke • Beam barrier finger and hand safety protection system • PLC control system • Dual hand/foot pedal control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Coil decoiler, feeder, and straightener • One set of die to spec • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed clearance: 420 mm Distance between side frames: 400 mm Ram adjustment (stroke setting): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table dimensions: 540×740 mm Die holding slot diameter: Ø40 mm Ram dimensions: 370×230 mm Table height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approx. weight: 4000 kg Note: Please contact us if you require changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 15 kW (20,39 hp), gaya penekanan: 200 t, lebar meja: 800 mm, panjang meja: 1.100 mm, gaya punching: 200 t, lubang tembus di meja: 220 mm, diameter silinder: 60 mm, penyesuaian langkah: 180 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are mechanical presses designed for cold forming operations such as punching, cutting, and die forming, operating via a force generated through an eccentric mechanism. Thanks to their high production speed and repeatability, they provide an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in serial production Operator safety-focused design (light curtain + safety systems) Low maintenance need with centralized automatic lubrication Production-ready use with PLC control + dual-hand/foot control Applications Cold cutting and punching operations Cold shearing applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts of 4140 tempered steel • Centralized fully-automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot control system • Mechanical safety lock system • Emergency reverse motor movement • Designed in accordance with work safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • 1 die set as per requested specifications • Eight-sided guiding slides ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Table–ram distance: 500 mm Slide–table distance: 600 mm Distance between columns: 510 mm Ram adjustment (setting): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchorage: 920 mm Side anchorage: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping hole diameter: Ø60 mm Ram size: 620×350 mm Floor-to-table height: 805 mm Stroke adjustment: 20–140 mm Gujdpsvtyx Ijfx Aazsf Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: Please inform us if you require modifications to technical specifications. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 60 t, panjang langkah: 400 mm, lebar meja: 700 mm, panjang meja: 700 mm, jarak antara tiang: 700 mm, gaya penarikan balik: 20 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 60/20 TON COLUMN-TYPE HYDRAULIC SPINNING PRESS General Description The CRONOSSTECH 60/20 ton column-type hydraulic spinning press is a rigid and compact press solution designed for precision metal forming, deep drawing, and spinning applications. Its four-column construction ensures stable maintenance of parallelism and perpendicularity tolerances throughout the pressing operation. The frame, manufactured from St52 grade steel, undergoes stress relief by vibration. Ram and pot systems can be controlled independently; stroke and pressure settings are precisely configured via the touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and an automatic lubrication system, this press ensures long service life, safety, and efficient operation. PLC-controlled architecture minimizes operator errors. Guedex N Ulgopfx Aazef This model provides an ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid, four-column press frame construction - Independent stroke and tonnage control for ram and pot - Settings adjustable via touchscreen panel - High precision and repeatability - Low maintenance requirements, long service life Fields of Application - Metal spinning operations - Deep drawing processes - Die testing and prototype production - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened, hard chrome-plated shafts SLIDE BEARING: Bronze Zr14 RAM CAPACITY: 60 ton POT CAPACITY: 20 ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m RAM STROKE: 400 mm POT STROKE: 100 mm MIN. CLEAR OPENING: 100 mm MAX. CLEAR OPENING: 500 mm WELD STRESS RELIEF: Vibratory stress relief WELD APPLICATION: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/sec MOVABLE TABLE SPINNING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec POT TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 175 mm – Ck45 POT CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY BOOST CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm MAIN CHARGING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via panel) RAM / POT STROKE & TONNAGE ADJUSTMENT: Adjustable via panel SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 ton Note on Production This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, daya: 18,5 kW (25,15 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 140 mm/dtk, kedalaman tenggorokan: 410 mm, lebar kerja: 3.100 mm, gaya tekuk (maks.): 220 t, jarak antara penyangga: 2.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo-motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick tool clamping system • Sliding front support system • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features Gedsx Nnzbepfx Aazjuf • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-channel dies • Backgauge X travel 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Distance Between Frames (mm) 2600 Stroke (mm) 310 Daylight (mm) 515 Throat Depth (mm) 410 Table Height (mm) 940 Approach Speed (mm/s) 180 Return Speed (mm/s) 140 Pressing Speed (mm/s) 10 Oil Tank (Lt) 290 Machine Weight (kg) 11300 Main Motor (kW) 18.5 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), gaya penekanan: 250 t, panjang langkah: 160 mm, lebar meja: 700 mm, panjang meja: 1.100 mm, kedalaman tenggorokan: 350 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, excentric-press; an excentric mechanism-powered type of mechanical press used in cold forming operations such as punching, cutting, and die shaping. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in serial production Operator safety-oriented design (light curtain + safety systems) Low maintenance with central automatic lubrication PLC control + dual hand/foot pedal operation for production-ready use Applications Cold cutting and punching operations Cold extrusion applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel fabricated frame • Four-point slide guidance • Nodular cast iron connecting rods and gear housings • Crankshaft and transmission shafts made from 4140 tempered steel • Central automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection system • PLC control system • Dual hand/foot pedal operation • Mechanical safety system • Emergency reverse motor function • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as per request • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Tons Throat depth: 350 mm Table–ram distance: 520 mm Gujdpfjx N Nfbjx Aazjf Slide–table distance: 630 mm Distance between side walls: 520 mm Ram adjustment (shut height): 150 mm Approx. press width: 2000 mm Approx. press depth: 2500 mm Approx. press height: 3100 mm Front anchorage size: 930 mm Side anchorage size: 1430 mm Table hole diameter: Ø250 mm Table size: 700×1100 mm Die clamping hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: Please contact us if you require alterations in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.