Beli Mesin Broaching / Frömag Rapida 463 bekas (77.328)

Kondisi: belum diuji (bekas), Forst RF 16 Internal Broaching Machine -WKG 1371- Technical Specifications: Pedpfx Ajhu E N Dsdispw Manufacturer: Forst Model: RF 16 Maximum Pulling Force: 16 t Maximum Stroke: 1200 mm Maximum Cutting Speed: 5.6 m/min Maximum Workpiece Diameter: Ø 700 mm Maximum Tool Diameter: Ø 120 mm Workpiece Fixture Seat: Ø 70 mm Note: Control valve missing

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1732, Vertical internal broaching machine with indexing table from Karl Klink Type: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Weight: 3.2 tons Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW Pedegyd Svopfx Adispw The machine has been fully overhauled and is therefore in very good condition.

Tahun pembuatan: 1964, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine no.: 2041 Year of manufacture: 1964 Weight: 3.2 t Psdpfx Adjgyd S Deijpw Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is thus in very good condition.

Tahun pembuatan: 1973, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 5116/447, Produsen: Rausch (Haan/Rhld) Tahun Pembuatan: 1973 Revisi: 3/2021 oleh perusahaan Wiemers AG Model: RS 6/1000 Nomor Mesin: 5116/447 Berat: 800 kg Informasi Umum / Teknis: Mesin penggiling vertikal mekanis yang telah diperbarui sepenuhnya dan belum pernah digunakan. Mesin penggiling Rausch Gaya tarik: 60 kN (80 kN) Kecepatan penggilingan: 3 m/menit dan 5 m/menit Kecepatan balik: 10 m/menit Langkah maksimum: 1000 mm Panjang alat maksimum: 1200 mm Ukuran meja / permukaan kerja: 610x470 mm / 520 x 320 mm Lubang meja: Ø 90 mm untuk mandrel penggilingan standar Dimensi (t x l x p): 1600 mm x 850 mm x 1000 mm (t = tinggi meja dari lantai tanpa struktur tambahan) Motor: 5,5 kW / 8,2 kW / 8,2 kW Catu daya: 400 Volt / 50 Hz Aksesori / Peralatan Tambahan: - Penggerak yang diperkuat (80 kN) dengan 3 kecepatan dan ventilasi eksternal motor terpisah - Jembatan tarik yang diperkuat untuk gaya tarik yang lebih besar (80 kN) - Pintu pelindung dengan pemeriksaan keamanan dan pengumpul serpihan - Pemindaian listrik rahang penjepit (kontrol pelepasan alat untuk mencegah jembatan tarik bergerak mundur secara tidak sengaja) - Meja mesin dari baja cetak (dibuat dari bahan padat, bukan meja cor) - Sistem pendingin terintegrasi dengan katup pengaman dan katup penguras - Sistem ayun pendingin/pelumas yang dipatenkan - Sistem penyetelan panjang alat yang dapat disesuaikan dari luar (dapat direproduksi di seluruh mesin) - Sistem pelumasan sentral untuk penggerak spindel trapesium Catatan: Mesin telah direvisi sepenuhnya, badan mesin telah diperbarui sepenuhnya, dan semua bagian yang aus telah diganti seperti yang tercantum di bawah ini. - Spindel trapesium dan mur spindel baru yang terbuat dari perunggu tahan aus cor - Semua bantalan dan segel telah diperbarui - Poros penggerak pusat baru - Meja mesin baru (terbuat dari baja cetak, bukan meja cor) - Sistem pendingin baru (pompa, katup pengaman, dan katup penguras) termasuk sistem ayun pendingin/pelumas WAG - Jembatan tarik dan rahang penjepit baru (jembatan tarik diperkuat tambahan) - Pemeriksaan rahang penjepit yang dapat dinonaktifkan telah dipasang (keamanan tambahan untuk operator & kerusakan alat) - Pintu pelindung dengan pemeriksaan keamanan telah dipasang (sebagai pengganti pelindung pegangan karet) - Sistem penyetelan panjang alat telah dipindahkan ke luar ruang mesin - Sakelar batas ujung tambahan telah dipasang - Semua kelistrikan (lemari kontrol) dengan semua komponen baru Pedpfx Adsgw Hvcsiepw - Motor penggerak yang diperkuat baru (Fa. Emod Jerman) dengan rem dan ventilasi eksternal - Mesin telah dicat ulang dengan cat struktural 2 komponen Mesin ada di gudang kami dan dapat diperiksa dalam keadaan berfungsi. Selain itu, kami selalu memiliki sejumlah besar sekitar 80 mesin penggiling bekas dari berbagai produsen di gudang.

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, steplessly adjustable Return speed: up to 34 m/min, steplessly adjustable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic workpiece feed (workpiece-specific) - Hydraulic tool clamping device (workpiece-specific) Remarks: Ppedpelpadyofx Adiew High-performance production broaching machine for large-scale series production with high cutting speed!

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideally suited for the production of keyways. Upon request, broaching tools and arbors can also be supplied. The machine is powered up and ready for demonstration in our warehouse. Psdpfx Asiw Dlkodiopw

Tahun pembuatan: 1965, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Tool holder on pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil capacity: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint: (W x D x H) approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding workspace) Power supply: 380 Volt, 50 Hz Pjdstuuvzepfx Adiopw Connected load: 19 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant/lubricant system • Manually operated tool traverse • The broaching slide with pull head holder is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal pull head for flat shanks up to max. approx. 40 mm width • Dividing attachment (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for manufacturing keyways with flat broaching tools as well as for profile broaching. Due to the rigid machine bed and robust tool feeder, the machine is very well suited for heavy-duty profile broaching tools. Machine is used and in a condition appropriate for its age. The machine is available for inspection at our warehouse. The machine has just been added to our inventory; it has not yet been technically or visually refurbished. Profile broaching pull heads are available on request, depending on DIN standard, size, and stock condition.

Kondisi: bekas, Tahun pembuatan: 2000, de-techdetails-01 Podpfsw Dugajx Adiopw

Tahun pembuatan: 1972, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 25 m/min Broaching stations: 3 units Passage width: 470 mm Station pitch: 125 mm Table: 400 x 400 mm Special features: Chip removal via permanent magnetic chip conveyor Ppjdpjcdtnhofx Adiow 1 hydraulic system, 1 working platform, electric hydraulic shank and end-piece clamping confirmation, automatic loading device

Tahun pembuatan: 1987, Kondisi: bekas, nomor mesin/kendaraan: 34, Grosszugkraft: 10 t Max. Hubhöhe: 1000 mm Ppsdend Dmjpfx Adiow Schnittgeschwindigkeit: 7,5 m/min Rücklaufgeschwindigkeit: 24 m/min Gewicht: 6,2 t Die Maschine ist zum Ausschälen von Rohren geeignet.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Tersedia mesin slot vertikal dalam Frömag. Jarum slot: 3, langkah: 800 mm, gaya tarik: 60 kN, daya terpasang: 15 kW. Dimensi mesin (X/Y/Z): sekitar 1050 mm/900 mm/3800 mm, kontrol: Frömag Commander PP-10. Inspeksi di lokasi memungkinkan. Ppsdpfsxph Sdex Adijw

Kondisi: baik (bekas), Tahun pembuatan: 1980, nomor mesin/kendaraan: 20007, Penawaran 23326 Pedpsyfgc Isfx Adiepw Data teknis: - Lebar jarum broaching hingga 10 mm - Panjang jarum broaching hingga 1000 mm - Gaya tarik 1,5 t - Kecepatan kerja 4 m/menit - Tinggi kerja / pengoperasian 1000 mm - Penggerak 400 V / 1,5 kW - Kebutuhan ruang sekitar P 1500 x T 1000 x L 400 mm - Berat sekitar 200 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 370 kg, daya: 3,5 kW (4,76 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang broaching: 800 mm, kecepatan broaching: 3 m/menit, panjang total: 920 mm, lebar total: 800 mm, tinggi total: 1.950 mm, Hersteller: Rausch (Haan/ Rhld) Modell: RS 3 G/ 800 Maschinen-Nr.: 2968/424 Baujahr: 1970 Gewicht: 370kg Überholung: 8/2025 durch Fa. Wiemers AG Unsere Ref. / Maschinen-Nr.: WAG 787 Allgemeine Informationen / Technische Daten: Ungenutzte, generalüberholte mechanische Vertikal-Räummaschine von Rausch Zugkraft: 3.000kg (30kN) Räummgeschwindigkeit: 3m/min und 6m/min Rücklaufgeschwindigkeit: 3m/min Maximaler Hub: 800mm Maximale Werkzeuglänge: 1.000mm Tischgröße / Arbeitsfläche: 340mm x 220mm / 430mm x 310mm Tischdurchlass: Ø 90mm für Standard-Räumdorne Werkstückdurchmesser: beliebig (ohne Spritzschutzkabine) Abmessungen (H x B x T): 1.950mm x 820mm x 900mm (Höhe = Tischhöhe zum Boden ohne Aufbauten) Motor: 3,5 kW Stromversorgung: 400 Volt / 50 Hz Zubehör / Sonderausstattung: - Modifiziertes Antriebssystem mit Getriebemotor und Zahnriemenantrieb - 2 Räummgeschwindigkeiten: 3m/min & 6m/min - Extern verstellbarer Hub, werkübergreifendes reproduzierbares Werkzeuglängen-Einstellsystem - Integrierte Kühlmittelanlage mit Rückschlagventil und Ablasshahn sowie Wahlschalter für Automatikbetrieb (keine automatische Schaltung im Schwenkbetrieb) - Patentiertes Kühl-/Schmiermittel-Schwenksystem - Dreiseitig geschlossene, nach vorne offene Spritzschutzkabine (ohne externes Bedienpult) - Maschinenverkleidung unterhalb der Schutztür mit Späneschutz und Abstellplatz für Werkzeuge - Elektrische Leitungsführung in Stahl-Schutzrohren - Elektrische Spannbackenabtastung (Werkzeugentnahmekontrolle, verhindert unbeabsichtigtes Zurückfahren der Zugbrücke) - Schutztür mit integrierter Not-Aus-Funktion - Bedienpanel aus Edelstahlblech mit dauerhafter Kennzeichnung Pedpfx Adeytvyxeispw - 4 zentrale Schmierpunkte für den Trapezspindelantrieb - Maschinendokumentation Hinweis: Die Maschine wurde komplett überholt und das Maschinengehäuse vollständig aufgearbeitet. Folgende Verschleißteile wurden ersetzt: - Neue Trapezspindeln und Spindelmuttern aus verschleißfester Bronze - Sämtliche Lager und Dichtungen erneuert - Zentraler Antriebswelle ersetzt - Komplettes Kühlmittelsystem (Pumpe, Rückschlagventil, Ablasshahn) inkl. Schmiermittel-Schwenksystem erneuert - Neue Spannbacken (Zugbrücke zusätzlich verstärkt) - Spannbackenabfrage mit Abschaltfunktion verbaut (zusätzliche Sicherheit für Bedienpersonal und zum Schutz vor Werkzeugbruch) - Schutztür mit Sicherheits-Abfrage ersetzt alten Gummischutz - Werkzeuglängen-Einstellsystem außerhalb des Maschinenraums verlegt - Zusätzliche Endschalter für Endlagen verbaut - Komplette neue Elektrik (Schaltschrank) mit Siemens-Komponenten - Edelstahl-Bedienpanel mit dauerhafter Kennzeichnung - Neuer Getriebeantriebsmotor (SEW) mit Zahnriemenantrieb - Maschine mit 2-Komponenten-Strukturlack neu lackiert Die Maschine befindet sich in unserem Lager und kann unter Strom besichtigt werden.

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Ppjdpfjcc D Ddjx Adijw Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Tahun pembuatan: 1971, Kondisi: sangat baik (bekas), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Ppodpehpqqujfx Adiow Weight: 4.8 t

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Ppsdod Nb A Njpfx Adijw Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, berat keseluruhan: 2.900 kg, daya: 8 kW (10,88 hp), tegangan masuk: 380 V, jumlah posisi broaching: 1, lebar total: 6.100 mm, tinggi total: 1.900 mm, Manufacturer: Karl Klink Model: RW 10 Year of construction: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pulling head mount in crossbeam: 85 mm Pedpfxoxtcz Ij Adiepw Broaching tool clamping: Universal pulling head for flat tangs up to 25 mm wide Pass-through bore in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by tool feeder machine body) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (without working area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Accessories / Special Features: • The machine features manual-hydraulic control for the broaching stroke movement • The machine is equipped with an integrated coolant and cutting fluid system • The machine has a simple oil drip tray mounted on the machine bed, without tool feeder Remarks: The machine is ideal for manufacturing keyways and profiles. On request, broaching tools, arbors, and pull heads can be supplied.

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg Ppsdpor A Hcbjfx Adiew General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: baik (bekas), Mesin Broaching / Mesin Tarik KARL KLINK RSI 2,5 EH -Tahun pembuatan: 1965 -Gaya tarik: 2500Kg / (25KN) -Kecepatan broaching: 1mm/menit hingga 9mm/menit (dapat diatur tanpa langkah) -Stroke maksimal: 800mm -Diameter benda kerja maks.: sekitar 250mm -Motor sekitar 3 KW -Unit pendingin -Indikator gaya tarik Pjdpsymz N Eefx Adiepw -Pembatas gaya tarik -Berbagai bushing penuntun (lihat gambar) -Kaki mesin Dimensi: PxLxT 1,1x0,7x2 meter / Berat 1600Kg Kesalahan dan kekeliruan dalam pengetikan dapat terjadi.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, nomor mesin/kendaraan: M 09074, berat keseluruhan: 950 kg, daya: 8 kW (10,88 hp), tegangan masuk: 400 V, Spesifikasi teknis: Penyesuaian manual: 400 mm penyesuaian manual Ppedpfjyazc Ssx Adiow Siklus pembuangan otomatis: 250 mm, siklus otomatis Lebar alur pasak: 2 hingga 32 mm Diameter benda kerja: 620 mm Gaya tekan maksimum: 20 kN nilai tetap Kecepatan pemotongan: 15 m/menit, dapat diatur secara kontinu Dimensi (L x P x T): 1000 x 1200 x 2440 mm Berat bersih: sekitar 950 kg Koneksi listrik: 3 x 400 VAC, 50/60 Hz, 8 kW Koneksi pneumatik: tidak diperlukan Warna: Biru RAL 5001, Abu-abu RAL 7035 Detail, lihat deskripsi PDF terlampir.

Kondisi: sangat baik (bekas), dalam kondisi kerja yang baik Psdpfx Aowwmr Ijdiopw

Kondisi: baik (bekas), berat keseluruhan: 10.364 kg, Tahun pembuatan: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTIKALE TISCH-OBEN-RÄUMMASCHINE Ausstattung: - Retriever - Shuttletisch - Späneförderer - Automatische Beladung - Grayco-Schmierung - AB PanelView-Bedienfeld - Kühlmitteltank & Pumpe Technische Daten: - Kapazität: 10 Tonnen - Hub: 30" (Zoll) - Tisch fährt nach oben - 1" (Zoll) Ziehwerkzeug / Retriever Ppodportrzaofx Adijw - Hydraulikaggregat - Späneförderer - Maschinenabmessungen (ca.): 165" x 48" x 60" - Maschinengewicht gesamt (ca.): 10.340 kg - Maschinensäule (ca.): 5.900 kg - Maschinenunterbau mit Späneförderer (ca.): 2.130 kg - Schaltschrank (ca.): 272 kg - Hydraulikaggregat (ca.): 2.040 kg

Kondisi: sangat baik (bekas), Keyway tool, special tool, keyway broaching tool, keyway broaching machine, keyway slotting machine, keyway slotting tool - Special tool for keyway cutting of blind hole bores - Guide holder - Keyway tool Ppedpfx Adeb A I Ufeiew - Weight: 80 kg

Kondisi: hampir baru (bekas), Jumlah barang: 18 set Pedpfezf Np Aex Adispw Berbagai pisau broaching Frömag dijual sebagai satu set -> 6x 6P9 - 15° Ø18-20 - A61 -> 2x 6P9 - 15° Ø17-18 - A60H / A60 -> 1x P59 - 15° - A-SO-60 -> 2x P59 - 15° - A51 -> 3x 4P9 - 15° Ø13-15 - A40 -> 1x 4P9 - 15° Ø12 - A40 -> 1x 3P9 - 15° Ø13-15 - A30 -> 2x 6 - Ø18-20 Pembelian satuan juga dimungkinkan, silakan tanyakan.

Kondisi: baik (bekas), Tahun pembuatan: 1961, trans-001 Ppsdpfjy H Nz Rox Adiew