Beli Romer Maut bekas (179)

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called demi-water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchange resin operating in the sodium cycle, - Strongly basic anion exchange resin operating in the chloride cycle, - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Hnedofz I Uiepfx Agkjn Rouezts The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half-treated water station is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchange column operating in the sodium cycle, - Strongly basic anion exchange column operating in the chloride cycle, Hnjdpfxofz Naks Agken - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Columns are made of AISI316L stainless steel.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Hodpfx Agjflk Awskenn Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation Hedsfy T Spspfx Agkenn - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption. Hnodpfx Agefzb Niokon

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption. Hjdpfxofzccns Agkenn

Kondisi: baru, Tahun pembuatan: 2026, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Hedjfzb Nbspfx Agkenn Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: baru, Tahun pembuatan: 2020, powder-coating-booth-kpo-3-de Hnedpfxjflk Aks Agken

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. Hsdpfsflrc Ssx Agksnn ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Hodofz U Tiepfx Agkenn Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, 7" Touch Panel The large color touch panel is aesthetically pleasing and provides comfortable, intuitive operation. All key parameters are set directly from the panel. Storage for 20 Programs with 10 Events Up to 20 programs can be stored and up to 10 consecutive time-temperature events can be activated, each arranged along the heating curve. This feature is particularly essential for more demanding processes. Gas / Oil Consumption Data Consumption is calculated based on the burner settings. This feature allows you to estimate the cost of a specific cycle, plan consumption, and control operating personnel. Two-Channel Recorder with USB for Cycle Parameters Each furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—similar to an aircraft black box—on a USB stick. The system also enables the analysis of monthly/daily reports, including media consumption and output. Each heating cycle, even those involving opening the door, can be re-traced several years back. No other manufacturer offers such a dedicated option. This system has been custom-developed by our programmers from scratch. Automatic Exhaust Flue The chimney can be programmed to open a few minutes before the end of the firing process in order to vent the chamber. Remote control via the control panel is available so the mechanism does not require manual operation, as is common with most other designs. Minute Forecast Until Completion When the firing cycle has started, the panel can calculate and display the remaining time based on the heating dynamics. Hnedpfsfy Txyox Agken Simple Door Operation To open, just pull the door; the lock applies adjustable pressure against the door for sealing. To close, simply push the door— the lock secures and automatically draws it in. Heat Loss Reduction To minimize heat escaping into the hall when opening the door, a hood is installed above it to redirect a portion of the hot air elsewhere. MTS System for Accurate Chamber Temperature Measurement Standard systems rely on a single temperature measurement, which is often inaccurate. The MTS system uses multiple sensors positioned at key points throughout the chamber. The multi-zone heating concept ensures a previously unattainable firing quality.

Tahun pembuatan: 2020, Kondisi: baru, Touch to Delete ROMER cabins are equipped with 4-inch color touchscreen controls. Cab operation is intuitive and available in three modes: automatic (temporary), automatic (via a plug-in filter sensor), or manual. Filter Plug Sensor The cabins are fitted with a sensor that monitors filter clogging and indicates when they need to be cleaned. The system also notifies the user when filters have been used. Automatic Filter Cleaning The electronic automatic filter cleaning system manages the cleaning intervals and activation times. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on operators to clean the filters. Thanks to this system, the operator does not need to remember or stop for cleaning. Low Noise Level Aluminum fans operate very quietly, producing only 74-79 dB, which is not excessive. Even with the standard cabin design, it is difficult to carry on a conversation near the units. Exhaust through the cabin. The cabin’s overhead squirrel cage fans improve workflow by eliminating the need for manual push systems, preventing operators from being distracted. Hnjdpfx Asfzciqsgksn Explosion Protection The cabin is designed to prevent explosive mixtures from accumulating during the painting process. All components have been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. Hedpfx Agofzkqmsksnn USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Hedpfx Agsfzrapokenn Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. Hjdpfx Agofz A D Nekonn ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Hsdpfxofz A H Ds Agksnn Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, ROMER manipulators are characterized by quiet operation. They are suitable for both simple, widely used and complex multidimensional processes. Programming is done via PLC control. They can handle both long and short strokes. The toothed belt drive ensures quiet operation. Maintenance-free AC motor. Slim column design for space savings. The robust construction of the manipulators provides extensive capabilities and high stability. The manipulator is equipped with a 7'' touch panel or can be externally controlled via the ModBus protocol with RJ45 cables. Hnjdpfofz Dmfjx Agkjn

Tahun pembuatan: 2020, Kondisi: baru, en-GB: • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per shot • 50 l waste container capacity Description • Dust collector with efficient radial impeller Hnsdpfx Ajfz Dqmogkjn • Two operating modes – full power and ECO • Base weight of filter material up to 260 g/m² • High suction power with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter equipped with its own solenoid valve

Tahun pembuatan: 2020, Kondisi: baru, • Electric data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m3/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m2 • Automatic filter cleaning • Air consumption: max. 12L at 6-8 bar per cycle • 50 L waste container capacity Description: Hodpfsfz Dq Asx Agksnn • Dust collector with an efficient radial impeller • Two operating modes - Full Power and ECO • The basic weight of the filter material used is up to 260 g/m2 • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Tahun pembuatan: 2020, Kondisi: baru, en-GB Hnodpfx Agsfz Dttjksn

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half demineralized water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Hsdsfz I Npopfx Agksnn Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half-demineralised water station is produced from the demineralised water plant using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter. Our RDI-2 / RDI-4 demineralisation stations are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel. Hsdefz I Srepfx Agkenn

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application Hnsdpofz Nb Tofx Agkon The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7" Touch Panel The large color touchscreen panel is aesthetically pleasing and offers comfortable, intuitive operation. You can configure all essential parameters directly on it. Hnjdpfx Ajfz U Hvogkon Storage for 20 Programs with 10 Events Each It is possible to store up to 20 programs and activate up to 10 consecutive time-temperature events, arranged within the heating curve. This is particularly required for more demanding processes. Gas/Oil Consumption Data Consumption is calculated based on the burner settings. This function allows you to estimate the cost of a specific cycle, plan consumption, and monitor staff. Dual-channel Recorder with USB Cycle Parameters Every furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—just like a flight data recorder—onto a USB stick.

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol Hjdpfx Aefz U Swegksnn • Programmable powder suction valve to keep the powder center clean