Beli Karl Klink Mesin Pengasah Jarum Broaching bekas (78.395)

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Kdsdpjw H Dgnjfx Ac Hor Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Well-maintained Sunnen honing machine with Felsomat loading system. Internal diameter range: Krossgrinding® tools: 5.46 to 32 mm with CGT tools Kdedpfx Acjud Nm Ro Her TurboHone® tools: 3.81 to 32 mm with MMT tools Connecting rod tools: 53.8 to 63.8 mm with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low-speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 strokes/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant tank capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, recommended 5.52 bar Temperature range: 0° to 35°C Floor requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 mm x H 1829 mm Colour: Pearl grey with pewter grey and burgundy decorative stripes Net weight: 1,579 kg Noise emission: < 71 dB (A) continuous load, < 75 dB (A) peak load Key features: Automatic setup: spindle speed, stroke speed, stroke length, feed rate and sparkout Automatic final machining: standard Machine operating modes: Automatic: Manual: Series production Single-piece production Clamping: optional

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Kapp AST‑305B – Technische Daten Maschinentyp: Automatische Schärfmaschine für Wälzfräser und Verzahnungsfräser Baujahr: ca. 1979 Maschinenfunktion: Nachschärfen von Wälzfräsern sowie schräg- oder gerade genuteten Fräsern; Nass- oder Trockenschliff möglich Maximaler Werkzeugdurchmesser: 300 mm (12 Zoll) Ksdpfswwkt Aox Ac Hjdr Maximale Werkzeuglänge zwischen den Spitzen: 700 mm (27 Zoll) Maximaler Tischweg: 550 mm (21,56 Zoll) Maximaler Schleifscheibendurchmesser: 300 mm (12 Zoll) Maximale Spitzenhöhe: 155 mm (6,1 Zoll) Tischvorschub (stufenlos einstellbar): – Tiefenschleifen: 30 bis 1.000 mm/min – Planschleifen: 3 bis 16 mm/min Drallwinkelbereich: 0° bis 45° Drallbereich: wählbar bis 24 Zoll auf Null bzw. 12 Zoll auf Null Schleifspindeldrehzahl: 2.200 U/min (optional 1.000–4.000 U/min) Axialverstellung der Schleifspindel: 420 mm (16,54 Zoll) Vertikale Verstellung des Schleifkopfes: 300 mm (11,81 Zoll) Spindelaufnahme: Morse 4 oder Steilkegel 40 Vorwählbarer Einzustich einzeln: Bereich 0 bis 9.999 (Einheiten) Maschinenabmessungen: Länge 3.000 mm × Tiefe 2.080 mm × Höhe 2.360 mm (ca. 118 × 82 × 93 Zoll) Maschinengewicht: ca. 3.000 kg (7.500 lbs) Steuerung: Ursprünglich manuell/analog, häufig nachgerüstet mit Allen‑Bradley-PLC

Kondisi: hampir baru (bekas), Jumlah barang: 18 set Berbagai pisau broaching Frömag dijual sebagai satu set -> 6x 6P9 - 15° Ø18-20 - A61 -> 2x 6P9 - 15° Ø17-18 - A60H / A60 -> 1x P59 - 15° - A-SO-60 -> 2x P59 - 15° - A51 -> 3x 4P9 - 15° Ø13-15 - A40 Kdjdpozf Np Ajfx Ac Hsr -> 1x 4P9 - 15° Ø12 - A40 -> 1x 3P9 - 15° Ø13-15 - A30 -> 2x 6 - Ø18-20 Pembelian satuan juga dimungkinkan, silakan tanyakan.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1977, Fungsionalitas: berfungsi sepenuhnya, Mesin pengasah VOLLMER LILIPUT SENIOR v Berfungsi penuh Kdsdpfxjyntk De Ac Hjr

Kondisi: sangat baik (bekas), berat keseluruhan: 800 kg, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, Mesin asah mata pisau CANA E Kdsdpfx Acszqtzys Hor kondisi sangat baik, berfungsi dengan baik dilengkapi dengan kerucut pemusat // batu asah pengiriman dan penyerahan barang dimungkinkan

Kondisi: bekas, Mesin gerinda perkakas universal yang dikendalikan secara konvensional / mesin gerinda pahat Tipe / Model: Deckel S1 Kondisi: Bekas Tahun pembuatan: Tahun 1980-an Data teknis Tinggi tengah: 65 mm - 95 mm Jarak tengah: maks. 250 mm Diameter gerinda: maks. 130 mm Dimensi meja: sekitar 470 x 175 mm Kedszmrzwspfx Ac Hedr Kecepatan spindel: 3.750 RPM hingga 7.500 RPM, dapat diatur dalam dua tahap Daya motor: 0,6 / 0,75 kW; 400 V Peralatan: - Sepatu baji - Penjepit tang MK 4 Artikel permintaan: Biaya transportasi dalam penawaran individual

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1624, pitch gigi: 1 mm, Kami menawarkan mesin penajaman mata gergaji dan penyetel mata gergaji baru, ILPRO Technology I80GF-C dan I70 GF, tahun pembuatan 2025. Model: Mesin penajam I80GF-C untuk mata gergaji pita Nomor seri: 1624 Tahun pembuatan: 2025 DATA TEKNIS: MATA GERGAJI PITA Lebar 8-80 mm Ketebalan 0,4-1,2 mm Jarak antar gigi 1-28 mm Kdjdpfxszudfws Ac Hjr Sudut bebas 0°-12-20° Gigi/menit 10-100 Model: Mesin penyetel I70GF untuk mata gergaji pita Nomor seri: 1625 Tahun pembuatan: 2025 DATA TEKNIS: MATA GERGAJI PITA Lebar 8-80 mm Ketebalan 0,4-1,2 mm Jarak antar gigi 3-28 mm Sudut bebas 0°-12-20° Gigi per menit 120-200 Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: siap digunakan (bekas), Mesin pengasah pisau magnetik dengan panjang pengasahan maksimum 3,2 m. Dudukan magnetik. Kondisi sempurna. Mesin berada di sekitar kota Görlitz hingga akhir Agustus. Ksdpfx Acszh Rbfs Hodr

Kondisi: bekas, Mesin Pengasah otomatis Vollmer, model CHC 21 H, lebar minimum dan maksimum gergaji pita 65-200 mm, jarak gigi 12-80 mm, tinggi minimum gigi 5 mm, set pinggir pada setiap sisi antara 0,3 hingga 1,5 mm, daya 0,55 kW, estimasi berat mesin 550 kg, tahun 1981 no. 364. Kdjdpfx Acey Swluo Her

Kondisi: baik (bekas), Mesin pengasah dan set pisau gergaji pita yang sepenuhnya otomatis dan sangat presisi (mata gergaji normal dan berjeda) serta untuk pengasahan pisau gergaji bundar. Fitur teknis Jarak gigi minimum: 2 mm Jarak gigi maksimum: 20 mm Lebar maksimum pisau gergaji pita: 50 mm Diameter minimum pisau gergaji bundar: 110 mm Diameter maksimum pisau gergaji bundar: 600 mm Motor pengasahan: 0,12 kW Motor utama: 0,20/0,25 kW Jumlah gigi yang diasah per menit: 35 dan 70 Kdodpjynkt Asfx Ac Hor Diameter batu gerinda: 175 mm Kecepatan batu gerinda: 3000 rpm Oli gearbox: SAE 30 (1,5 kg) Berat: 115 kg

Kondisi: baik (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: 11176, Penawaran 25439 Data Teknis: Kjdpsyapx Uefx Ac Hjdr - Diameter media abrasif: 150 mm - Kepala putar – unit penggerinda dapat diputar dan dimiringkan pada lengan sendi - Laci debu - Kecepatan cakram dapat diatur secara kontinu - Ukuran meja: 1400 x 980 mm - Tinggi meja sekitar 870 mm - Penggerak: 400 V / 0,75 kW - Sambungan pneumatik: 6 bar - Kebutuhan ruang sekitar: L 1700 x T 1700 x D 1300 mm - Berat sekitar 400 kg

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working surface: 610 x 470 mm / 520 x 320 mm Table bore: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height to floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional changes/optimisations made to the original machine: - External stroke adjustment - New cross-machine, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety guard door with monitoring (integrated in the emergency stop circuit) - Machine enclosure below the guard door, with chip guard and tool storage area - Electrical probe for clamping jaws (tool removal check to prevent unintentional retraction of the pull bridge) - Coolant swivel system with switching solenoid valve during the swivel process (enables coolant to be switched on before broaching stroke is initiated » visual check of lubricant flow—no dry cut!) - Routing of electrical cables in steel protective conduits - Heavy-duty control cabinet bracket for machine components - Additional oil-tight tray mounted on the control cabinet - Three-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Operating panel made of stainless steel sheet with durable labeling - Four central lubrication points for the trapezoidal spindle drive Remarks: The machine has been completely overhauled; the machine body is fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system (pump, solenoid valve, drain valve), including the coolant/lubricant swivel system, is new Kdodjw Ighijpfx Ac Hjr - The clamping jaws are new - The complete electrical system (control cabinet) is new - All covers and enclosures are new - The following components have been overhauled and reused: -- Machine base -- Machine stand -- Machine table with table insert -- Pull bridge (clamping jaws are new) -- Gear wheels -- Electric motor (new brake, new bearings) The machine is in stock at our warehouse and can be inspected under power. The images attached are original photos of the machine. The machine is CE certified. The CE certificate corresponds to the 1998 standard (first overhaul).

Kondisi: baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1137.05, Mesin pengasah alat bekas Merek: KAPP Tipe: AST305B Tahun pembuatan: 1979 Nomor seri: 1137.05 Dengan aksesori Kodpfx Acowzk R Ns Hjdr

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1968, nomor mesin/kendaraan: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled mechanical vertical broaching machine Rausch RS 6G, unused, with “CE” marking Pulling force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / work area: 610x470 mm / 520x320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unrestricted Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height to floor without superstructures) Motor power: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Kodpfx Acev Rmvzs Hedr Equipment: - Gear motor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic locking and safety interlock - New chip chute with tool parking facility - Protective covering for stroke adjustment - Oil-tight shelf on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the pull bridge; extra safety for operator & tool) - Integrated coolant system with electrically actuated solenoid valve and drain tap - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length setting system (reproducible across machines) - Stainless steel control panel with durable labeling - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Remarks: The machine is completely overhauled. During the overhaul, the machine base, machine body, and table have been completely refurbished. All wear parts have been replaced. The machine is upgraded to the state-of-the-art and complies with current “CE” regulations. It is supplied with a “CE” certificate. General: The double spindle drive provides smooth operation and a central pull point as well as a constant broaching speed (selectable broaching speed: 3 m/min or 6 m/min). The design enables quick and easy setup for keyway broaching using flat broaching tools. Thanks to the universally designed pull bridge and machine table, profile and flat broaching tools can be used without the need for additional broach holders. Matching broaching tools and mandrels for this machine are available on request.

Kondisi: baik (bekas), Tahun pembuatan: 1978, Mesin pengasah pisau dengan panjang pengasahan 1300 mm, dilengkapi batang magnet yang dapat diputar. Mesin berlabel Vollmer, namun dibuat oleh Reform. Telah diuji fungsi. Kdsdpfx Acjynt I Nj Hor

Kondisi: bekas, TECHNICAL DATA - Maximum force: 63 kN - Broaching length: 1000 mm - Spindle stroke: 400 mm Kjdpfx Acoug U H Uj Hsdr - 3 broaching speeds: 2.5 - 5 - 7.5 m/min - Return speed: 24 m/min - Number of machining stations: 1 - Hydraulic motor: 9 kW - Hydraulic capacity: 600 l - Cooling capacity: 150 l - Main voltage: 400 V - Total power: 10.5 kW - Required space: 3,700 x 3,000 mm - Height: 3,200 mm - Weight: 3,500 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin pengasah untuk perkakas putar. 4 posisi. Kedpfx Acjzrnmao Hodr

Kondisi: sangat baik (bekas), Gockel G130PL x 5100mm Mesin Pengasah Pisau Spindle Vertikal Pabrikan: Gockel Model: G130PL x 5100mm Tahun: 1980 Kondisi: Bekas Nomor Seri: 5908 Kdedjy N Amfopfx Ac Hjr Nomor Stok: 2602 Magnet Chuck: 800mm x 5100mm Roda Segmen: diameter 1000mm Daya Motor Roda/Spindle: 185KW / 248hp Fitur Tambahan: - Tahun produksi: 1980 - Kepala roda bergerak - Batu asah baru untuk roda - Pengangkatan dan penurunan otomatis roda - Auto down feed roda - Marpos sizing - Pompa dan separator pendingin

Kondisi: bekas, Mesin pres hidrolik untuk bengkel, mesin pres untuk membersihkan, mesin pres untuk membuat alur Mesin pres hidrolik buatan sendiri, tipe MaVo 5t-20 Digunakan untuk membersihkan alur pasak pada lubang berongga. Gaya tekan 5 ton (pada tekanan hidrolik 100 bar) Lebar rangka 770 mm Langkah silinder 220 mm Jarak ulir batang piston ke palang meja maksimal 900 mm Kecepatan pres, plunger ke bawah sekitar 11,5 mm/detik = 220 mm dalam 19 detik Kecepatan pres, plunger ke atas sekitar 24,5 mm/detik = 220 mm dalam 9 detik Daya motor 5,5 kW Koneksi jaringan 400 Volt, 50 Hz Kdodpfxewki Ape Ac Hor - Kontrol 2 tangan (satu tombol untuk menghidupkan pompa, 1 tombol untuk gerakan ke bawah, 1 tombol untuk gerakan ke atas) - Pompa hidrolik HAWE, tipe K5/3 (dapat menghasilkan tekanan 400 bar, tetapi pompa menjadi sangat berisik) - Koneksi ulir pada batang piston M42 x 1,5 mm, ulir luar - 1 buah perpanjangan yang dapat dipasang, sekitar 290 mm untuk batang piston dengan M42 x 1,5 mm, ulir dalam - 1 buah perpanjangan yang dapat dipasang, sekitar 250 mm untuk batang piston dengan M42 x 1,5 mm, ulir dalam - 2 buah perpanjangan plunger untuk dipasang pada perpanjangan yang dapat dipasang, panjang 110 dan 130 mm - 2 buah pelat penyangga - Konstruksi baja yang sangat stabil dari profil T ganda 140 - Daya tahan konstruksi baja diperkirakan 40 ton atau lebih - Dapat dipindahkan dengan troli Ukuran ruang yang dibutuhkan P x L x T 1200 x 930 x 2280 mm Berat 485 kg

Kondisi: siap digunakan (bekas), Mesin Penggerinda Profil Friedrich Zimmermann Kdjdoztfl Aepfx Ac Hjr Penggerinda Pita Vertikal / Zimmermann + Pita Pengganti Kesalahan dan kekeliruan dalam pengetikan dapat terjadi.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, Mesin penajam untuk mata gergaji melingkar dengan lapisan karbida. Kedpozl Shbefx Ac Hjdr Sudah diperiksa secara teknis. Direkondisi di bengkel. Spesifikasi teknis tersedia dalam format PDF.

Kondisi: sangat baik (bekas), Mesin pengasah gergaji HSS LOROCH model Ekostar 760, tahun pembuatan 2008 Kdjdpfx Acsw Hrvqo Hor

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, de Kodpfov Sd Nhjx Ac Hedr

Kondisi: bekas, 1 mesin pengasah pahat bekas Merek: Deckel Tipe: SOE dengan optik Tahun pembuatan: 1988 Data teknis: Kecepatan motor penggerak: 2800 rpm Kecepatan spindle penggiling: 4500 rpm Daya penggerak: 0,55 kW / 380 Volt Berat sekitar 200 kg Aksesori dan perlengkapan: Collet penjepit Optik Rangka mesin / dudukan bawah Peralatan Kodpfx Aoyl Iipsc Hodr