Beli Bandsaw Otomatis bekas (9.406)

Kondisi: sangat baik (bekas), Mesin pengisi, pengikat jaring, pengklip, dan pengemas daging utuh otomatis JBT Tipper Tie TN4200LP, digunakan untuk memproduksi daging asap berkualitas tinggi. Mesin ini sangat langka dan jarang ditemukan di pasar barang bekas. Mesin ini berasal langsung dari pabrik daging asap di Inggris yang tutup pada bulan Juni 2026. Mesin ini dirawat dengan sangat baik sejak dibeli baru pada tahun 2016. Dodpfx Ajzh N Hyjfweku

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, STAR SH-12 Kontrol: Fanuc 21-T Dedpfx Afjxwugdjweku Perangkat pembuangan benda kerja panjang Lengkap dengan bar feeder IEMCA MINI BOSS 325

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Mesin pelapis dengan 2 sumbu, meja pemberian material, sistem kontrol MS-DOS. Dedsz Hqm Ajpfx Afweku

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, 1 x Mesin Bubut CNC Merek: Star Model: SA 12/16 Tahun Pembuatan: 1997 Pengendali: Fanuc 18 i-T Dilengkapi dengan majalah pemuatan Merek: Iemca Model: CH 220/32 Tahun Pembuatan: 1998 Spesifikasi Teknis: Diameter spindel: 16 mm Langkah kepala spindel: 140 mm Kecepatan spindel utama: 500 - 12.000 RPM Kecepatan spindel bantu: 500 - 8.000 RPM Djdpjz Hccijfx Afwsku Kecepatan: alat yang digerakkan: 0 - 4.000 RPM (data lainnya, lihat foto) Sekitar 6 bulan yang lalu, spindel bantu pada mesin ini telah diperbaiki. Mesin ini dapat diperiksa secara langsung saat beroperasi.

Kondisi: baru, Cutting diameter 240 mm Saw band dimensions 2730 x 27 x 0.9 mm Table height 920 mm Cutting speed 35 + 70 m/min Cutting capacity at 90° round 240 mm Cutting capacity at 90° square 230 mm Cutting capacity at 90° rectangle 270 x 230 mm Cutting capacity at 45° round 210 mm Cutting capacity at 45° square 200 mm Cutting capacity at 45° rectangle 200 x 210 mm Cutting capacity at 60° round 130 mm Dksdpjd Iip Sjfx Afwsu Cutting capacity at 60° square 130 mm Cutting capacity at 60° flat 130 x 160 mm Total power requirement 1.2 kW Machine weight approx. 0.26 t Required space approx. 0.9 x 1.6 x 1.74 m • Miter cut left 60° • Quick-release vice with quick-release mechanism • Quick-release lever for easy handling • Frame and gearbox made from a single casting, ensuring very quiet operation and minimal vibration • Electronic monitoring of blade tension and blade breakage, with saw blade cover • Carbide saw band guides • Large machine bed • Machine base (supplied disassembled) with automatic cooling system The AutoCut system consists of: Hydraulic cylinder, feed control, spring package, limit switch Automatic lowering of the saw frame via the hydraulic cylinder, infinitely variable feed adjustment, with limit switch at the end of the cut. Rapid lowering of the saw frame from home position to the workpiece, then switching to normal feed rate (e.g., for scribing). Manual operation: The hydraulic cylinder acts as a brake cylinder (e.g., for notching). Using the brake cylinder, the saw can be positioned at any point during the return stroke.

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right Dksdpfx Aofd Abajfwou - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, Cutting capacity at 90 degrees: round 172 mm Cutting capacity at 90 degrees: square 170 mm Cutting capacity at 90 degrees: rectangular 170 x 170 mm Saw blade dimensions: 2035 x 20 x 0.9 mm Dimensions (L x W x H): 430 x 960 x 520 mm Dkedpfx Ajfgyhzjfwou Blade speed: 30 - 80 m/min Total power requirement: 1.5 kW Machine weight approx. 38 kg SPECIAL OFFER PRICE!! Berg & Schmid - Portable Bandsaw PBS 171 ESC Powerful and particularly robust metal bandsaw with aluminium die-cast saw table and infinitely variable cutting speed for mitre cuts up to 60° Optional: Machine stand type 20508

Kondisi: baru, Cutting diameter: 220 mm Dkodpfxjfgyh Nj Afwju Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90 degrees: round 220 mm Cutting capacity at 90 degrees: square 210 x 210 mm Cutting capacity at 90 degrees: flat 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 240 kg Required space approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw designed for mitre cuts from 0° to 60° to the left. After the cut, the machine stops automatically via a safety limit switch. The lower travel can be steplessly adjusted by means of a hydraulic system. Raising the saw arm after the cut can be performed to any desired position, where it will remain securely in place. The Z241/R comes equipped with: Hydraulic cylinder, emulsion pump, eccentric clamp, base frame, saw band, 400V plug (16A). The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.42 t Double-mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system Dedpofgyh Tofx Afwoku

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately Dsdpofgyicjfx Afwsku 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90 degrees: round 680 mm Dsdpjfgyifefx Afwoku Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight approx. 4.45 t Space requirement approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping is carried out vertically on the feed and discharge sides. From the K-tech 800 H, the machine is equipped as standard with an additional horizontal vise. Hydraulic saw frame lowering, material positioning, and the pusher system are CNC-controlled in coordination. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC controller enables programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper jaws" which are hydraulically operated. This ensures secure gripping and handling of materials and bundles that deviate slightly from the ideal shape. The pusher system is built separately and runs on ball-bearing linear guides, ground rack, and is powered by a frequency-driven, robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space requirements: approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. Starting with the K-tech 800 H, the machine Dodpfxsfgyigs Afweku comes standard with an additional horizontal vice. The interplay of the hydraulic saw frame downfeed, material positioning, and the pusher system is CNC controlled. The machines are equipped as standard with the environmentally friendly "B&S-Clean Cut Cutting System" with minimum quantity lubrication. This reduces cleaning time and conserves resources. CNC control A CNC controller allows programming of up to 90 cutting programs with different section lengths, quantities, and mitre cuts. The B&S pusher system, feed and positioning system, features "double-sided opening grippers" which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate slightly from the ideal shape. The pusher system is built separately and is guided by ball-bearing linear guides, ground rack, and frequency-driven robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Dkodpfofg E Hmsx Afwju Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double miter bandsaw for fast cutting with pusher system P15, option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake with large radial center positioning. The work table is mounted on high-quality preloaded bearings which ensure very smooth rotation. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, features "double-sided opening grippers" which are hydraulically operated. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and runs on ball-bearing linear guides, a ground rack, and is powered by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Blade speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions L x W x H: 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance for cutting special steels. • The welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw frame, vice, feed, saw blade guides) utilize modern linear guides capable of high static and dynamic load capacity, ensuring minimal sliding friction. • Another key feature is the roller system for material positioning, hydraulically driven. These rollers move at a right angle to the material, allowing optimal clamping. • Thanks to adjustable blade height control, the operator can precisely position the band near the top edge of the material. After cutting, the blade automatically returns to its previous position. Alternatively, the ‘remain’ function can be selected to leave the blade at the lower position. During the cutting cycle, the software compares sawing load with preset values to allow the system to stop in case of irregularities. • The saw blade is cleaned by two adjustable steel brushes with hydraulic drive. • The hydraulic unit with filter and pressure gauge ensures particularly smooth operation at a constant pressure. • Precision-ground carbide inserts for saw blade clamping, complete with hardened, adjustable lateral guide rollers. The adjustable blade guide automatically moves as close as possible to the material. • The saw blade is tensioned by a hydraulic cylinder, controlled by machine software. Tension is automatically released after a preset time in idle mode or after a cutting cycle. Dkodpfx Afsfg E Hpjweu • Automatic version with CNC control available for X-TECH 900 / 1200 models, with 500 mm feed length for high-production series. • The material is supported by a table with seven rollers. These are driven by a hydraulic orbital motor, ensuring precise placement even at maximum load. • All guided movements run on four recirculating ball guides with high capacity for static and dynamic loads; significantly reduced feed friction. Induction-hardened, ground prismatic guides. Price on request.

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Dimensions L x W x H: 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw with dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Driven chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vises. Dedpfxsfg E Hzo Afwjku + Feed system with vertical rollers for lateral material support. + Numerically controlled band saw, which can also be operated semi-automatically, featuring the new MEP 50 control unit, developed specifically by MEP for automatic machines, based on Windows CE. + “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring the cut surface when the band lifts at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7” touchscreen display and mechanical buttons, allowing for operational control of the saw, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Kondisi: baru, Cutting diameter: 250 mm Dksdpofg E H Iofx Afweu Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: Saw band frame, vice assembly, and base made of durable cast iron High-precision degree marking on the cast iron structure Electrical system (with fully labeled wiring and 24 V low-voltage system) Control handle IP 55 for manual cycles (where applicable) Rotating chip brush for the saw band Quick-approach closing unit with vice Precise end stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering manuals in the user’s language SHARK 281 in manual operation and SHARK 281 CCS in manual operation, but with cutting through automatic downfeed by the saw head’s own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting, (B) adjustment of cutting speed, (C) hydraulic brake with reservoir, (D) end stop for band halt. CCS is optionally available for previously delivered machines as well. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw band and maintenance-friendly coolant tray above the machine base In versions with pneumatic vice (MA), opening and closing of the vice is done via manual valve (pedal control available as an option).

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Dsdpjfg E H Sjfx Afwoku Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 670 kg Dkedpfx Asfg E H Tsfwju Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Electric coolant pump for blade cooling and lubrication Chip removal brush Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Tools and operating instructions included.

Kondisi: baru, Cutting range at 90°: round 305 mm Cutting range at 90°: square 260 mm Cutting range at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 – 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirements approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made in one casting, exceptionally quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cutting! • CNC control for optimized workflows Entry of various parameters such as quantities and material lengths, automatic groove calculation • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. 1 sawing program with multiple section lengths • Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from Dkjdpfxjupw R As Afweu 2 mm to 9,999 mm, remnant length 170 mm. Includes: - Micro-spray device - Leveling elements

Kondisi: baru, MSS2024-001 Djdsfg E H Nspfx Afwjku

Kondisi: baru, en-001 Dkodpfxewirhro Afwsu

Kondisi: baru, Condition: New Delivery time: approx. 14 – 16 weeks from order Country of origin: Turkey Price: €45,100 Leasing rate: €861.41 Saw frame: double-column guide Saw band dimensions: 5200x34x1.1 mm Infinitely variable band speed: 20–100 m/min Cutting capacity 0° round: 360 mm Cutting capacity 0° square: 360 mm Cutting capacity 0° flat: 610x360 mm Cutting capacity 30° round, square: 360 mm Cutting capacity 45° round, square: 360 mm Cutting capacity 60° round: 325 mm, square: 265 mm Working height: 735 mm Hydraulic motor: 1.5 kW Main motor: 3 kW Coolant pump motor: 0.12 kW Length: 2,850 mm Width: 2,250 mm Height: 1,870 mm Weight: 2,400 kg NC control Double-column guide with linear rails 3° cutting angle Chip brush Control panel Hydraulic feed vice Hydraulic vice Hydromechanical blade tension Inverter Optical height adjustment Proximity switch for blade slip detection Pressure adjustment Coolant pump Saw blade Safety switch Operating manual in GERMAN or ENGLISH Dkjdpfjwirhxjx Afwsu OPTIONS: Hydraulic bundle clamping device Micro-spraying unit Laser cutting line Roller conveyors and saw blades ALTERNATIVE: BMSO 360 CGS NC (with servo feed instead of hydraulic feed) €50,900

Kondisi: bekas, Tahun pembuatan: 2000, used condition year of manufacture: 2000 stock number: 6253 delivery time: immediate, subject to prior sale price: €1,900 in stock: 1 saw frame: pivoting frame saw blade dimensions: 2480 x 0.9 x 27 mm blade speed: 45 / 90 m/min cutting capacity 0° round: 225 mm cutting capacity 0° flat: 180 x 245 mm cutting capacity 30° round: 100 mm, 100 x 100 mm cutting capacity 45° round: 160 mm, 160 x 160 mm working height: 935 mm motor: 1.1 kW length: 1500 mm width: 700 mm height: 1400 mm weight: 225 kg lowering via damping cylinder with control valve coolant system vise with quick-release lever roller conveyor 2000 mm with manual stop 3 spare blades included operating manual in English with CE declaration of conformity OPTIONS: Dkjdpfx Afjynmy Eoweu Additional roller conveyors and saw blades available on request USED MACHINERY PURCHASE IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detailed photos & function videos of the current condition • ON-SITE LIVE CHECK Live test at our premises • DIGITAL DEMONSTRATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day return policy Details:

Kondisi: baru, Condition: New Delivery time: Approx. 10 weeks from order Country of origin: Turkey Dkodjynm Ntopfx Afwou Price: €14,200 Leasing rate: €272.64 Saw frame: Swivel frame Saw blade dimensions: 4160 x 34 x 1.1 mm Blade speed: Infinitely variable, 20–100 m/min Cutting capacity 0° round: 320 mm Cutting capacity 0° square: 320 mm Cutting capacity 0° flat: 610 x 320 mm Cutting capacity 30° round: 260 mm, square: 225 mm Cutting capacity 45° round: 320 mm, square: 320 mm Cutting capacity 60° round: 320 mm, square: 320 mm Working height: 740 mm Hydraulic motor: 0.37 kW Main motor: 2.2 kW Coolant pump motor: 0.12 kW Length: 2100 mm Width: 1200 mm Height: 1350 mm Weight: 1150 kg Cutting capacity 75° round: 320 mm, square: 320 mm Chip brush Control panel Height adjustment via switch Hydromechanical blade tension Inverter Material stop chute Coolant pump Saw blade Safety switch Gearbox Adjustable angle scale for mitre cuts 1.2 m roller conveyor HYDRAULIC SAW FRAME LIFTING Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic top clamp Roller conveyors and saw blades

Kondisi: bekas, Tahun pembuatan: 2003, Mesin Persiapan untuk Gergaji Pita Kayu Kohlbacher Stingrey Proses Pengelasan Plasma Sepenuhnya Otomatis Material pelapis keras dilelehkan di dalam cetakan tembaga, sehingga terbentuk gigi yang telah dibentuk sebelumnya Dksdpfjz Hy Ucjx Afwju Pengerasan secara induktif Lebar mata gergaji 30 - 360 mm Ketebalan mata gergaji 0,6 - 4 mm Jarak antar gigi dapat disesuaikan 20 - 100 mm Kecepatan kerja 3 - 6 gigi/menit Material las Batang Stellite. Ø 3,2 mm Penyangga mata gergaji Perangkat penjepit elektrik sentral untuk gergaji pita hingga 12 m