Beli Veb Pengisi Gemuk bekas (6.322)

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 200 h, Fungsionalitas: berfungsi sepenuhnya, SHOWROOM machine, the listed unit was never delivered and has only been operated for testing purposes. Rotary Doypack Packaging Machine DEAP-8BT: Dkedpfotuwf Eex Aatot The 8-station rotary horizontal filling and sealing machine fills and seals Doypack stand-up pouches at cycle speeds of up to 50 units per minute. The compact design of the rotary table machine is highly space-saving and can be flexibly adjusted for different pouch widths. The rotary machines of the AP series are a cost-effective alternative to complex linear filling machines, eliminating the need for time-consuming format changes. The stand-up pouches are conveyed via a pouch magazine and are filled and sealed through 8 rotary workstations. Applicable product categories: The DEAP-8BT series reliably packs: • Pet food • Cosmetics (shower gel, soap) • Food (e.g. muesli, dried fruits) • Small parts Machine information: • Rapid pouch format changeover • Integratable additional modules (gas flushing, weighing systems, double sealing) • Touch panel control with programmable memory • Centralised gripper adjustment • Custom special construction possible -- for special widths or specific feeding systems • Up to 50 units/min (depending on pouch size) Other information: • Safety standards: CE conformity, DIN standards • Noise level: below 80 decibels according to DIN 45635 • Applicable pouch types: pre-made stand-up pouches, flat pouches, spout pouches, ziplock pouches, slider pouches, side-gusseted pouches, single-lip (depending on optional components) • Film types: OPP/CPP, OPP/CE, PET, PE, laminated films, composite films • Product types: piece goods (screws, nuts, etc.), bulk goods (flour, nuts, etc.), liquids (sauces, paints, etc.) This offer is for the packaging machine only and does not include the multihead weigher.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Dijual mesin horizontal untuk pembentukan, pengisian, dan penyegelan (HFFS) bekas dari seri DEAPHS untuk pembuatan, pengisian, dan penyegelan kantong otomatis dari film datar. ### Kondisi Mesin Saat Ini Saat ini, mesin ini dikonfigurasi untuk pembuatan kantong dengan segel empat sisi. Mesin ini membentuk kantong langsung dari film datar, mengambil – dalam kombinasi dengan sistem pengisian yang sesuai – mengisi, dan kemudian menyegel kantong secara otomatis. Seri DEAPHS pada dasarnya memiliki desain modular dan dapat disesuaikan untuk bentuk kantong dan aplikasi lain sesuai dengan peralatan yang ada atau tambahan, misalnya: - Kantong segel tiga sisi / kantong sachet - Kantong segel empat sisi - Kantong Doypack / kantong dasar berdiri Penyesuaian ke bentuk kantong lain bergantung pada ukuran, produk, dan komponen mesin yang dibutuhkan, dan bukan merupakan bagian dari konfigurasi saat ini. ### Kemungkinan Aplikasi Tergantung pada sistem pengisian yang digunakan, mesin ini cocok untuk pengemasan, misalnya: - Produk berbentuk bubuk - Granulat dan produk berbentuk butiran - Makanan - Makanan hewan peliharaan - Produk kosmetik - Produk teknis dan non-makanan lainnya - Kemasan porsi, ukuran sampel, dan contoh Sistem pengisian dan pengumpan yang berbeda dapat digunakan untuk produk yang berbeda. ### Perlengkapan Mesin - Gulungan pelepasan film independen - Pengelasan dasar kantong - Pembentuk dasar kantong - 3 unit penyegel horizontal - 2 unit penyegel vertikal - Penggerak film/kantong yang dikontrol servo - Pemotongan kantong mekanis - Pembukaan kantong vakum - Kontrol sel foto untuk film yang dicetak - Layar sentuh LCD - Panasonic SPS - Penggerak film servo Pelepasan film terpisah memungkinkan gaya tarik film yang terkontrol dan penyesuaian dengan lebar film dan ukuran kantong yang berbeda. ### Sistem Pengisian yang Mungkin Tergantung pada aplikasinya, mesin dapat dikombinasikan dengan sistem pengisian berikut, antara lain: - Pengisian sekrup - Pengisi cangkir volumetrik - Timbangan kombinasi multi-kepala - Pengisi piston - Pengisi pompa / dosis cairan, misalnya Hibar Ketersediaan atau cakupan pengiriman dari sistem pengisian masing-masing, mohon ditanyakan secara terpisah. ### Data Teknis Dimensi mesin: kira-kira 5.500 × 1.100 × 1.400 mm (P × L × T) Berat bersih: kira-kira 2.000 kg Catu daya: 380 V / 3 Fase / 50 Hz Daya sambungan: kira-kira 6,5 kW Dksdpfx Aaeum R Ezotst Konsumsi udara: kira-kira 0,23 m³/menit ### Komponen / Produsen yang Dipasang Antara lain komponen dari: Mitsubishi, Panasonic, Autonics, ABB, Airtac, dan SMC Film pengemasan yang sesuai serta peralatan pengumpan, pengisian, dan periferal tambahan juga dapat ditawarkan sesuai dengan aplikasinya. Inspeksi mesin dapat dilakukan berdasarkan perjanjian. Informasi lebih lanjut mengenai ukuran kantong, lebar kerja, sistem pengisian yang mungkin, dan cakupan pengiriman dapat diperoleh berdasarkan permintaan.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SHOWROOM Mesin Mesin Pengisian dan Penyegelan Horizontal APHPM-250G Informasi Teknis: * Lebar kantong maks.: 100-250 mm * Panjang kantong maks.: 150-400 mm * Kecepatan: 8-12 buah/menit Dkodpfx Aot H E D Ssatot * Jenis kantong yang dapat digunakan: Kantong datar, kantong dasar berdiri, kantong berpenutup ritsleting * Kedalaman dasar: 40-140 mm Dengan mesin pengisian dan penyegelan horizontal kami untuk kantong yang sudah jadi, Anda pasti akan membuat pilihan yang tepat! Seri mesin ini meyakinkan dengan pengoperasiannya yang sederhana dan desain yang ringkas. Mesin pengemasan kami menyegel kantong yang sudah jadi dengan sangat kuat, sehingga produk Anda dikemas dengan aman untuk transportasi dan penjualan. Berkat teknologi inovatif kami, produktivitas tinggi dari mesin pengisian dan penyegelan dipastikan. Mesin APHPM kami mengisi dan menyegel hingga 60 kantong per menit dan dapat digunakan di hampir semua industri (misalnya makanan, obat-obatan, kosmetik, dan bahan kimia halus). Dengan demikian, mesin inovatif kami memberikan kemudahan yang besar dalam siklus pengemasan Anda.

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: LC277, Spesifikasi Teknis & Data Kinerja Lini lengkap PET isobarik bekas untuk minuman ringan dengan kapasitas 6.000 botol per jam, yang diproduksi oleh BAT, Kosme, dan M.A.S, menawarkan solusi pengisian yang efisien untuk produksi minuman ringan. Dengan kecepatan produksi 6.000 botol per jam, lini pengisian bekas ini ideal untuk operasi skala menengah yang ingin meningkatkan proses pengemasan industri mereka. Format botol: 0,06 L dan 0,10 L Jenis wadah: PET Tahun produksi: 2004 Status saat ini: Disimpan di gudang Sistem Otomatisasi & Kontrol Tingkat Lanjut Lini pengisian lengkap ini dilengkapi dengan sistem kontrol canggih yang memastikan operasi yang lancar. Tingkat otomatisasi memungkinkan kontrol yang tepat atas proses pengisian, pelabelan, dan penutupan, sehingga meningkatkan efisiensi keseluruhan produksi minuman. Dilengkapi dengan fitur keselamatan penting, operator dapat mengandalkan proses produksi yang lancar dan aman. Manual tersedia untuk mempermudah pengaturan dan pemecahan masalah, yang memberikan jaminan tambahan untuk kesiapan operasional. Spesifikasi kelistrikan memastikan kompatibilitas dengan pasokan listrik industri standar dan terintegrasi dengan mulus ke dalam sistem yang ada. Integrasi Lini Produksi Lini pengisian ini dirancang dengan mempertimbangkan fleksibilitas dan memungkinkan integrasi yang lancar dengan peralatan produksi lainnya, untuk mengoptimalkan seluruh alur kerja produksi minuman Anda. Lini ini mendukung kemampuan perubahan format, yang memungkinkan penyesuaian cepat antara berbagai ukuran botol. Fitur ini memastikan fleksibilitas multi-produk dan mengakomodasi kebutuhan pengisian yang berbeda. Kondisi Mesin & Riwayat Perawatan Mesin saat ini disimpan di gudang dan siap untuk digunakan dalam lini produksi Anda. Meskipun ini adalah lini pengisian bekas, lini ini memiliki riwayat operasi yang baik dan dianggap cocok untuk penggunaan jangka panjang dengan perawatan yang memadai. Protokol perawatan rutin memastikan kesiapan dan keandalannya setelah pemasangan. Kinerja Operasional & Keserbagunaan Desain lini pengisian lengkap ini mendukung berbagai jenis produk, menjadikannya tambahan yang serbaguna untuk pengaturan produksi Anda. Meskipun dirancang terutama untuk minuman ringan, sifatnya yang dapat disesuaikan memungkinkan penanganan produk minuman serupa dengan upaya penyesuaian minimal. Kemampuannya untuk memproses wadah PET semakin memperkuat kemampuan adaptasinya dalam skenario pengemasan industri. Dkedpfjvguyajx Aatot Persyaratan Pemasangan & Persiapan Lokasi Pemasangan yang efisien adalah kunci untuk kinerja optimal setiap lini pengisian. Lini lengkap PET isobarik bekas membutuhkan ruang khusus untuk menampung konfigurasinya. Lini ini dilengkapi untuk terhubung dengan mulus ke jaringan utilitas fasilitas Anda, sehingga meminimalkan waktu henti selama integrasi. Standar Keselamatan & Sertifikasi Kepatuhan Keselamatan...

Kondisi: bekas, Tahun pembuatan: 2016, Ikhtisar GAI MLE 661 BIER ini adalah sistem monoblok isobarik untuk membilas, mengisi, dan menutup botol kaca dengan tutup mahkota, yang diproduksi pada tahun 2016 oleh GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italia) dan mulai beroperasi pada tahun 2018. Sistem ini menggabungkan proses pembilasan, pengisian isobarik melalui 6 katup pengisi, dan penutupan dengan tutup mahkota dalam satu rangka. Sistem ini dirancang untuk bir kerajinan dalam botol kaca 0,33 liter, 0,5 liter, dan 0,75 liter dengan tutup mahkota berukuran 26 mm dan 29 mm. Waktu siklus, kecepatan lini, dan penghitung produksi dikendalikan melalui panel sentuh mesin. Mesin ini masih terpasang dan beroperasi. Dedpszx Dt Nsfx Aatskt Spesifikasi Teknis - Produsen: GAI Macchine Imbottigliatrici S.p.A. (Ceresole d’Alba, Italia) - Model: MLE 661 BIER (identifikasi pada pelat nama: MLE661 BIER 003) - Tahun Pembuatan: 2016 (mulai beroperasi pada tahun 2018) - Jenis Mesin: monoblok pembilasan-pengisian-penutupan isobarik, untuk botol kaca - Katup Pengisi: 6 - Kapasitas: hingga 1.300 botol per jam - Produk: bir dan minuman berkarbonasi lainnya (pengisian isobarik) - Ukuran Botol: 0,33 l / 0,5 l / 0,75 l (kaca) - Tutup Mahkota: 26 mm dan 29 mm - Kontrol: panel sentuh dengan penghitung untuk waktu siklus, kecepatan, dan jumlah produksi - Konsumsi Daya: 6,38 kW - Pasokan Udara: 6 bar - Dimensi: sekitar 480 x 130 x T 230 cm Perlengkapan - Suku cadang untuk ukuran botol dan ukuran tutup mahkota yang tertera - Suku cadang Kondisi Bekas – dalam kondisi beroperasi, masih terpasang, dan teraliri listrik. Sekitar 6.800 jam operasi; pada Desember 2025, penghitung mesin menunjukkan 5.982 jam operasi dan sekitar 6,25 juta botol yang telah diisi. Pemeliharaan terakhir dilakukan pada Desember 2025. Ketersediaan Mulai 27 November 2026. Lokasi: Kroasia. Mesin dapat diperiksa di lokasi tempat mesin beroperasi, sesuai permintaan.

Kondisi: baru, Kapasitas: maks. 2.500 kg/jam Distributor ini dapat digunakan untuk berbagai jenis produk seperti daging, ikan, pasta, saus, dan salad. Termasuk 1 nosel per saluran keluar (bulat, persegi, segitiga, atau persegi panjang) dengan diameter luar maksimum 40 mm. Suhu produk hingga ± 80 °C. Dilengkapi dengan sambungan universal. Dkjdpezx U Dxjfx Aatet Dilengkapi dengan mekanisme pengunci cepat. Tersedia dengan 2 hingga 12 saluran keluar. BARU

Kondisi: bekas, Tahun pembuatan: 2017, Ikhtisar Gruber KombiKEG ini adalah mesin kombinasi semi-otomatis untuk membersihkan dan mengisi tong serta tong sekali pakai, dengan kapasitas sekitar 30 tong per jam. Pembersihan, sterilisasi, dan pengisian dilakukan dalam satu siklus otomatis: pembersihan berkala dinding tong dan pipa pengarah dengan larutan alkali dan asam, sterilisasi uap, serta pengisian dengan tekanan balik dengan pengaturan tekanan diferensial. Mesin ini dipasang oleh BRAUKON pada tahun 2017 dan diberi makan di sisi masuk dan keluar melalui konveyor rol baja tahan karat. Mesin ini seluruhnya terbuat dari baja tahan karat dan dilengkapi dengan kepala pembersih, stasiun sterilisasi, dan kepala pengisi. Pengisian dilakukan dengan CO₂ atau nitrogen. Pengontrolannya dilakukan melalui PLC Siemens SIMATIC dengan layar sentuh berwarna untuk pengaturan, pengaturan suhu dan tekanan diferensial, pesan kesalahan, dan penghitung. Mesin ini masih terpasang, terhubung, dan beroperasi, dan dapat diperiksa di lokasi sesuai permintaan. Data Teknis - Produsen: Gruber (Alfred Gruber GmbH, Austria) - Model: KombiKEG - Tahun Pembuatan: 2017 - Jenis Mesin: mesin kombinasi semi-otomatis untuk mencuci dan mengisi tong, satu kepala pembersih / satu stasiun sterilisasi / satu kepala pengisi - Kapasitas: sekitar 30 tong/jam - Tong: tong baja tahan karat dengan kepala "A" dan tong sekali pakai, semua sistem koneksi yang umum - Fungsi: pembersihan berkala (larutan alkali dan asam), sterilisasi uap, pengisian otomatis - Gas pengisi: CO₂ atau nitrogen - Pengontrol: Siemens SIMATIC PLC, HMI layar sentuh berwarna - Tangki deterjen: 175 l, terisolasi, terintegrasi, dengan koil pemanas uap, katup pengatur, dan pembuang kondensat - Pompa: 1,1 kW dengan perlindungan kering elektronik - Konstruksi: baja tahan karat 1.4301, lemari kontrol baja tahan karat, tidak ada komponen listrik di area basah - Pneumatik: blok katup multiarah Festo, katup piston pneumatik Djdpfxjzxt Ate Aatekt - Dimensi: sekitar 140 x 126 x T 230 cm (mesin tanpa konveyor) - Luas alas: sekitar 449 x 98 cm termasuk konveyor rol masuk dan keluar - Suplai daya: maks. 7,5 kW - Suplai udara bertekanan: 2–3 bar, sekitar 0,35 m³ per tong - Suplai uap: 3–4 bar Peralatan - Jalur rol baja tahan karat, masuk dan keluar - Penghasil uap - Dua katup ventilasi untuk pengisian yang cepat dan lengkap - Sakelar tekanan untuk memantau saluran masuk dan sensor aliran balik elektronik - Kontrol pembukaan katup kerucut, meja kerja dengan perangkat penampung kerucut - Panel kontrol untuk peralihan antara mode pengisian dan pembersihan CIP - Dokumentasi teknis, sertifikat kesesuaian, dan denah tata letak mesin - Suku cadang Kondisi Bekas, beroperasi, dan masih terhubung ke suplai daya. Sekitar 3.000 jam operasi, sekitar 90.000 tong terisi dan 75.000 tong dibersihkan. Produksi terakhir pada bulan April 2026, perawatan terakhir pada bulan Januari 2026. Mesin ini bersih, terawat, dan siap untuk produksi. Mesin ini akan diganti dengan mesin dengan kapasitas lebih tinggi. Ketersediaan Tersedia segera. Lokasi: Prancis. Pembongkaran, penanganan, dan pemuatan ke truk termasuk dalam harga (pemuatan EXW).

Kondisi: bekas, Tahun pembuatan: 2012, Kami menawarkan mesin bekas OMAG MOD. CONF. DIVA-5 OMAG STICK PACKAGING MACHINE model DIVA/5, tahun pembuatan 2012. Model: MOD. CONF. DIVA-5 Nomor seri: 2298 Tahun pembuatan: 2012 Pelindung kecelakaan sesuai dengan standar CE. Daya listrik yang dibutuhkan: tiga fasa 220/380 V, 50/60 Hz. Udara tekan yang dibutuhkan: 6 Atm. Djdjx Rw Hvepfx Aatjkt Rangka terbuat dari baja las dan dicat dengan cat resin epoksi. Kode warna: RAL 9006 (standar OMAG). Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan hubungi kami melalui pesan atau telepon.

Kondisi: bekas, komplett Edelstahl geeignet für Normwagen von 200L Entladungshöhe : ± 1.150 mm fahrbar von beiden Seiten bedienbar beladen : max. 250 kg Abmessungen (L x B x H): ± 1.500 x 1.100 x 1.500 mm Djdpfezxradjx Aatekt

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, as-new condition (only 5,000 m² of parquet processed), compact oil application line comprising: Roller Application Unit: For application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity of 18 l/min Frequency inverter for variable speed of application roller Frequency inverter for variable speed of counter roller Transport belt speed variable: 3 to 14 m/min Stainless steel recovery trays Pad + Brush Unit: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed variable: 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions (L x D): 300 x 160 mm Quick-change system for brushes UV / LED Unit: Touch screen control Manual height adjustment Dedpfjx Ah A Asx Aatekt Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED output = 12 Watt/cm² Incl. ventilation fan Kevlar fabric transport belt Transport belt speed variable: 3 to 14 m/min Outfeed Conveyor Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed variable: 3 to 14 m/min Used Machinery Notice: • Technical details and intermediate sale subject to change. • Listed prices are ex-site, loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines on-site. • Special agreements are valid only if provided in written form. (We only respond to inquiries containing your address and telephone number!)

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Produsen: PFM Tipe: Zenith Inox Tahun: 2002 Kapasitas: sekitar 50 pcs/menit Daya listrik: 4,5 kW Berat: 680 kg Dedpfxsxapzze Aatokt Opsional: Pengisi piston dengan tangki berpemanas untuk keju olahan Kondisi: baik, berfungsi penuh

Kondisi: bekas, Consisting of: “Ishida” Multihead Weigher Model: CCW-M-214W-S/50-SS Number of heads: 14 Capacity: up to 2 x 30 weighings/min Filling weight (max. weight): 10,000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10,000 g Maximum volume: 12,500 ccm (per individual weighing) Minimum graduation: 1 g Display: Touch screen Power supply: 230V, 50Hz Connected load: 1.6 kW In good condition + Vertical Form Fill and Seal Machine (Flowpack) “Rovema” Model: VPK360 - 14115 Mechanical output (cycles/min.): 120 Max. roll width / diameter (mm): 770/450 (770 / 600 with front rollers) Bag width (min-max, mm): 80-360 Bag length (min-max, mm): 200-600 Filling volume (max., cm³): 12,000 Sealing pressure (max., N): 6,000 (option: 8,000) Programme memory: Standard: 100 (option: 1,000) Dimensions (L x W x H, mm): 2,435 x 1,680 x 2,015 Weight: 1,500 kg Power supply (Volt): 230 / 400 Power consumption (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: RAL 9007L / grey aluminium Operating temperature (min-max, °C): +5 ... +45 Storage temperature (min-max, °C): -30 ... +60 Humidity (max., %): 15...95; No condensation In good condition + Vertical Form Fill and Seal Machine (Flowpack) “Rovema” Model: VPK360 - 14116 Mechanical output (cycles/min.): 120 Max. roll width / diameter (mm): 770/450 (770 / 600 with front rollers) Bag width (min-max, mm): 80-360 Bag length (min-max, mm): 200-600 Filling volume (max., cm³): 12,000 Sealing pressure (max., N): 6,000 (option: 8,000) Programme memory: Standard: 100 (option: 1,000) Dimensions (L x W x H, mm): 2,435 x 1,680 x 2,015 Weight: 1,500 kg Power supply (Volt): 230 / 400 Power consumption (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: RAL 9007L / grey aluminium Operating temperature (min-max, °C): +5 ... +45 Storage temperature (min-max, °C): -30 ... +60 Humidity (max., %): 15...95; No condensation In good condition Dedpjzxdqzefx Aatokt + Carton Erector - Packaging Machine “Paal” Model: ELLE 3000 S Operating capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1: Tray with cover Product designation: Stand-up pouch 4.0 kg Product dimensions: approx. 240 x 105 x 370 mm Product weight: 4.0 kg Grouping: 1 x 3 upright Packaging type: Tray with inner glued cover and cover securing system Dimensions: Infeed height of product: 650 mm Discharge height of package: 500 mm Installation area: approx. 8,000 x 6,500 mm Please refer to the layout plan (see photo attached) for main dimensions 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 In good condition

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, vffs-1 Dedpfx Aev Hnzqeatokt

Kondisi: baru, Tahun pembuatan: 2025, Sample filling system for products with low viscosity (ketchup, jam, sauces, etc.) suitable for bottles, jars, and cans. – Includes container orientation system, bottle/container rinsing unit, viscosity filler (hot filling), and vacuum sealing function. – Specifications: Filling volume 20–1000 ml; bottle sizes: diameter 20–150 mm; cap diameter: 20–70 mm; number of filling heads: 4–12; output: up to 6,000 bottles/containers per hour; filling volume tolerance: +/- 1%; capping rate: >99%; power supply: 380 V, 3.5 kW; compressed air: 0.6 m³, 6 bar. – Please note: these specifications refer to the sample system. Final specifications may vary. Kindly provide your packaging details (container size and shape, filling product, required output, etc.) so we can prepare a complete quotation for you. Dodpfx Aaev Nlbmotjkt Please note that our new machine prices are often below typical used machine prices. Feel free to contact us and share your packaging requirements. – We typically have 30–50 different new machines in stock for immediate delivery. In addition, for custom-made machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are supplied with full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic filling and sealing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses safely and precisely by means of a peristaltic pump system and seals the vials with a lyophilization stopper. The 8-head capping machine also operates very quickly and precisely and is suitable for aluminum screw caps. The vials are individually guided, enabling safe and rapid filling and sealing. Also included is a collection table for the finished product, which can be flexibly combined with the capping machine and main machine to form a complete line. All machines/modules are equipped with dust protection covers and a laminar flow hood. – Specifications of the filling and sealing system: Number of filling stations: 4; Number of stoppering heads (lyophilization stoppers): 1; Number of capping heads for aluminum screw caps: 8; Filling volume: max. 30ml per vial; Idle speed: up to 150 bottles/min (with 4 filling stations and 5ml per vial); Accuracy: = ±1-3%; Suitable bottles: glass; Power: 3.35kW; 220/380V; Line dimensions: depending on customer-specific configuration; Dkjdpfjv Nlcdox Aatot Total weight: approx. 1215kg. The photo shows only the main machine. Additional images of other modules can be provided upon request. Please note that our new prices are often below typical used machine prices. Feel free to contact us and let us know your packaging requirements. We generally always have 30-50 different new machines immediately available from stock. For customer-specific machines, we offer very short delivery times starting at approx. 3 weeks. All machines are supplied with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic capsule filling machine for powder or pellets in capsules of size 000 - 5. In addition to the main unit, various add-on modules and machines enable a fully automated filling process. Included: material hopper, capsule hopper, vacuum conveyor, capsule feeding system, industrial dust separator, capsule polisher, metal detector, collection container (finished product). – Specifications: Suitable for capsule size: 000 – 5; segment bore: 25; max. machine cycle rate in idle: 140 cycles/minute (corresponds to an output of up to 3500 capsules/minute); main machine dimensions: L1555xW1165xH2040mm; main machine weight: 2200kg. Dkodpfx Aasv Nlc Rstet Please note that our new prices are often lower than typical used equipment prices. Feel free to make an inquiry and let us know your packaging requirements. – We generally have 30-50 different new machines available from stock for immediate delivery. For machines requiring custom manufacturing, we offer very short lead times from approximately 3 weeks. – All machines are supplied with full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, and general care products like shower gel, shampoo, hair gel, toothpaste, sunscreen, etc. Suitable for pre-made tubes (closed with a cap) made of plastic, metal, or coated composite materials. Fully automatic tube feeding, positioning (rotating in the tube pocket) using registration marks, as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. ‘No tube – no fill’ is also a standard feature. Water cooling system, batch/date printer, and dosing unit consisting of a pneumatically-operated piston pump and supply tank with level sensor are included. PLC controlled, operation via touchscreen. Optional at extra charge: heated supply tank, agitator for supply tank, additional format sets (tube pockets) for different tube diameters, external tube feeding lift. – Specifications: max. machine cycle rate idle: 65 cycles/minute; filling range: 1–400 ml; accuracy: ±0.5%; tube diameter: 10–50 mm (each tube diameter requires one tube pocket); tube length: 80–230 mm; number of filling heads: 1; supply tank capacity: 45 L; product-contact parts made of stainless steel 316L; power supply: 220/380V, power consumption: 9 kW; compressed air: 0.4–0.6 MPa; machine dimensions: L2000 x W1160 x H2100 mm. Dedpev Nlduefx Aatskt Please note that our new prices are often lower than usual used equipment prices. Feel free to contact us, letting us know your packaging requirements. – In stock: typically 30–50 different new machines available for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are supplied with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general care products such as shower gels, hair shampoos, hair gel, toothpaste, sun cream, etc. Suitable for pre-manufactured tubes (closed with caps) made of plastic, aluminum, or coated composite material. Fully automatic tube feeding and orientation (rotating in the cradle) based on the registration mark, as well as tube filling and sealing. Before filling, tubes are flushed with air to prevent contamination. 'No tube, no fill' is also a standard feature. The system includes a water cooling system, batch/date printer, and dosing unit consisting of a pneumatic piston pump and storage tank with level sensor. PLC controlled, operated via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (cradles) for various tube diameters, external tube feed elevator. – Specifications: max. machine cycle rate (empty): 80 cycles/minute; filling range: 1–400 ml; accuracy: ±0.5%; tube diameter: 10–60 mm (each tube diameter requires its own cradle); tube length: 50–240 mm; number of filling heads: 1; storage tank capacity: 40 L; product-contacting parts made of stainless steel 316L; power supply: 220/380V; power consumption: 9 kW; compressed air: 0.4–0.6 MPa. Dsdov Nldzjpfx Aatjkt Please note that our new prices are often below the standard prices for used equipment. Simply contact us and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are sold with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic liquid filling system with 8 filling heads for various ranges: ONE of the following filling ranges can be selected: a.) 25-250 ml, b.) 50-500 ml, or c.) 100-1,000 ml. Stainless steel design, conveyor with adjustable speed control, MITSUBISHI touchscreen, bottle neck positioning system, filling heads move up and down during the filling process (ideal for foamy products). No bottle – no filling function. Suitable for various liquids (cosmetics, perfumes, floral oils, liqueurs, etc.). Reliable performance and precise filling with hot and cold liquids. – Specifications: Max. machine cycle speed (idle): 80 cycles/min; Power supply: 220V; Compressed air: 6 bar (kW output and air consumption depend on the filling range – as do machine dimensions). Djdov Nk Ryjpfx Aatjkt The machine/system is also available in other configurations for different packaging sizes and speeds. Please note that our new machine prices are often lower than common used machine prices. Feel free to enquire and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock at any time. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Automatic powder filler and lid sealer for small containers such as coffee capsules. – Suitable for filling powdery products (coffee, coffee blends, drinking chocolate, milk powder, etc.) into various sizes and shapes of capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, with/without filter, etc.) followed by sealing. Automatic filling and dosing by auger filler. UV sterilisation system, ioniser, and dust extraction system for tray formats included. Automatic film feeding and dual hot-sealing of the lid. – Specifications: max. idle speed: 90 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; hopper capacity: 10L (approx. 6kg powder); power supply and consumption: 3-phase, 220V, 7.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; protective gas flow rate: approx. 200L/min; machine dimensions: L3420xW2200xH2688mm; weight: 900kg. Specifications refer to Nespresso capsules; deviations may occur with other brands of capsules. Djdsv Nkz Eopfx Aatekt Please note that our new prices are often lower than typical used equipment prices. Feel free to send an enquiry and let us know your packaging requirements. – We usually have 30-50 different new machines available ex-stock. For custom-built machines, we offer very short lead times, from approx. 3 weeks. – All machines come with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Vertical packaging machine for the production of pillow bags with longitudinal seam and gusseted stand-up pouches (gusset forming tool required). Equipped with: quick-change forming assembly; SIEMENS PLC; WEINVIEW touchscreen; photosensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film transport; thermal transfer printer for batch number, date, best before date. - VFFS machine specifications: max. machine cycle rate in idle mode: 60 cycles/minute; bag size: L(60–500)xW(120–410)mm (with dual film draw-off L = 800mm), gusseted stand-up pouch: L(60–500)xW(100–350)xD(40–150)mm (with dual film draw-off L = 800mm); suitable film width: 260–850mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 8.0kW; required compressed air: 0.7MPa; air consumption: 0.25–0.40m³/min; weight: 770kg. Please note that our new prices are often below typical used machine prices. Feel free to inquire and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. In addition, for custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with a full warranty. Dkodpfx Aaov Nndwotjt

Kondisi: baru, Tahun pembuatan: 2025, Vertical packaging machine for producing pillow bags with back seam and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming unit; SIEMENS PLC; WEINVIEW touchscreen; photo sensor (registration mark detection) for seal/cut position; pneumatic end seal unit; servo motor for film transport; thermal transfer printer for batch number, date, best-before date. Dsdpfx Aov Nnfhoatekt - VFFS machine specifications: max. idle machine cycle rate: 15 cycles/min; bag size: L(60-600) x W(200-585) mm (dual film draw-off L = 1100 mm), gusseted stand-up pouch: L(60-600) x W(140-500) x D(100-250) mm (dual film draw-off L = 1100 mm); suitable film width: 420-1200 mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 8.2 kW; required compressed air: 0.7 MPa; compressed air consumption: 0.25-0.50 m³/min; weight: 1030 kg. Please note that our prices for new machines are often below standard used prices. Feel free to contact us to discuss your packaging application. – We typically have 30–50 different new machines available for immediate delivery from stock. For customer-specific machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are supplied with full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Vertical form, fill and seal (VFFS) machine for manufacturing and sealing 3- or 4-side sealed pouches. Equipped with: touchscreen; PLC; photo sensor (registration mark detection) for seal/cut positioning; pneumatic sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: maximum machine cycle rate (idle): 60 cycles/min; pouch size: L(40-210)xW(60-160)mm (double film feed for longer pouches possible); suitable film width: 120-320mm; product-contacting parts made of: AISI 304 (AISI 316 optional for extra cost); power supply: 220V, 50/60Hz; power consumption: 2.4kW; required compressed air: 0.2-0.8MPa; air consumption: 0.6m³/min; dimensions (LxWxH): 1326*1066*1503mm; weight: 450kg. Dksdpfx Aev Nnf Ijatet Please note that our new prices are frequently below the typical prices for used machines. Feel free to inquire and tell us about your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from about 3 weeks. – All machines are supplied with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Vertical packaging machine for producing doypacks or flat pouches with or without zipper. Equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for precise sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, best-before date. – Specifications VFFS machine: max. idle cycle rate: 45 cycles/minute; bag size: L(120-235)xW(60-200)mm; suitable film width: 280-520mm; product-contacting parts made from: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.9kW; required compressed air: 0.4-0.8MPa; air consumption: 0.7m³/min; dimensions (LxWxH): 2090*1820*1935mm; weight: 800kg. Please note that our new prices are often below the usual prices for used equipment. Simply contact us with your packaging requirements. – 30-50 different new machines are usually available ex stock for immediate delivery. For customer-specific machines, we offer very short lead times from approx. 3 weeks. – All machines are available with full warranty. Dksdpfxjv Nngfs Aatot

Kondisi: baru, Tahun pembuatan: 2025, Vertical packaging machine specifically designed for the cosmetics industry for the production of round pouches and four-side sealed double-chamber sachets. The completely round, side-sealed pouches are produced two per cycle. Changing the pouch type requires time-consuming retooling and some technical experience. Included is a dosing pump for creams, fluids, etc., which is selected based on customer-specific product requirements; corresponding specifications are then determined accordingly. PLC and LCD touchscreen from Siemens, automatic program setup, registration mark sensor, SS304 stainless steel version including hot foil stamping unit (for production date, etc.). - Specifications: Bag sizes: customized; film roll width: max. 320 mm; suitable for composite and single-layer aluminum, PE, BOPP, and PP films, as well as paper; machine cycle rate (no load): 40 cycles/min (equals 80 round pouches or 40 double-chamber sachets); 220V/2.5kW; 6 bar, 0.3 m³/min. Please note that our new prices are often below the usual prices for used machines. Feel free to inquire and let us know your packaging requirements. - We usually have 30–50 different new machines available from stock for immediate delivery. For machines made to customer specifications, we offer very short lead times starting from around 3 weeks. - All machines are supplied with full warranty. Dkjdpfov Nmyqjx Aatot