Beli Alat Uji Penggulung Roda Gigi Dua Sisi bekas (29.894)

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 90 mm, lebar benda kerja (maks.): 3.200 mm, panjang benda kerja (maks.): 3.200 mm, ketebalan tepi (maks.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units, left side: 5 Milling unit (AS10) Double finish milling cutters, top and bottom 2 pre-milling units Milling unit Bwjdpoyq Avhsfx Am Tjn Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraper Polishing (2 motors) Spraying device TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 90 mm Max. panel length: 3,200 mm Max. panel width: 3,200 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm EQUIPMENT Feed chain with carriers Pressure with rubber belt Panel guide rails with NC positioning Edge spool magazine with 6 positions Hot melt glue system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spraying device mounted on top cabinets The machine is sold and delivered in its actual and legal condition ("as seen and agreed") on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7685

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (option 3000) Cam spacing (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transmission bar (Master & Slave systems) FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Open station EDGE BANDING PROCESSING (for each side): Gluing station (hot melt adhesive) 283.205 Edge pressure zone. Edge magazine for rolls (No. 2 fold) End trimming unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min, servomotor) Milling unit 08.055 (KW 0.66 x 2) 0°-30° Multi-function unit (radius milling and profile milling) 08.342 (KW 0.66 x 2) Bwedpfx Ameu Ekbne Tjn Sprayer unit (for polishing liquid) Open station (for optional addition of a scraper) Buffing unit 08.617 (KW 0.18 x 2)

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) EDGEBANDING SECTION (each side): Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Bedpfxjifnxxo Am Tewn Milling unit 2 x 0.55 kW (0° - 30°) Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, 150-ton tool tryout press Bodpfx Amokw Rbas Town Clearance (installation height): 1000 mm Stroke: 600 mm Ram plate: 1500 mm x 1000 mm Table area: 1500 mm x 1000 mm Light curtain on front side Siemens control Weight: 12.5 tons

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0440298, mesin bor meja: 120 mm, diameter meja: 500 mm, berat keseluruhan: 5.200 kg, diameter roda gigi: 500 mm, DETAIL TEKNIS Diameter roda: 500 mm Diameter roda minimal: 50 mm Diameter maksimum lingkar luar roda dengan internal gear: 800 mm Jarak maksimum antara sumbu pemotong dan sumbu meja: 355 mm Jarak minimum antara sumbu pemotong dan sumbu meja: 0 mm Jumlah gigi maksimum pada roda yang dipotong: 300 Jumlah gigi minimum pada roda yang dipotong: 12 Bwedpjyx U T Aofx Am Ten Modul terkecil: 1,5 Modul terbesar: 8 Diameter meja: 500 mm Lubang meja: 120 mm Kedalaman lubang: 650 mm DETAIL MESIN Berat: 5.200 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dokumentasi / manual, dua sisi, Zusätzliche Ausstattung: Trennmittelsprühvorrichtung oben/unten / Doppelvorschneider Längs/Quer: 6,6 kW mit elektropneumatischer Steuerung / Leimauftragsstation A3 – 2 Walzen / Profilfräsaggregat FF12 oben/unten mit 12.000 U/min / Finish-Aggregat FA11 oben/unten / Stufenlos verstellbare Anschlagschablonen mit maximalem Schablonenauszug von 25 mm / Standardfräsaggregat SF20 6,6 kW / Vorschlichtaggregat 0,55 kW PUR OTT 2-kg-Schmelzstation Vorteile der Maschine Technische Maschinenvorteile Werkstückdicke: 12 – 40 mm / Mindestwerkstückgröße (LxB): 250 x 240 mm / Maximalwerkstückgröße (LxB): 2500 x 1200 mm / Maximalwerkstückgewicht: 50 kg Kantenmaterialstärke (Rollenware): 0,4 – 3 mm / Maximale Kantenquerschnittsfläche (Kunststoff): 135 mm² / Maximale Kantenquerschnittsfläche (Furnier): 100 mm² / Maximaler Rollendurchmesser: 830 mm Bedpfxsxwui Eo Am Tjwn Längsbearbeitungsgeschwindigkeit: bis zu 35 m/min für dünne Kante bis 0,6 mm / bis zu 30 m/min für dicke Kante bis 3 mm Querbearbeitungsgeschwindigkeit: bis zu 30 m/min beim Plattenzuschnitt / bis zu 20 m/min bei der Kantenbearbeitung Mindestwerkstückabstand: 500 mm

Kondisi: baik (bekas), Tahun pembuatan: 2002, 10442 Bwsdpfx Aeym Nbcjm Tsn

Kondisi: bekas, Tahun pembuatan: 2013, Raddurchmesser - max. 260 mm Radbreite 320 mm Bwjdpfxex R U Hgj Am Ten Modul - max. 4,5 Modul - min. 0,5 Steuerung SIN 840D Schrägungswinkel - max. +/- 45 ° Gesamtleistungsbedarf 68 kW Maschinengewicht ca. 15,50 t Raumbedarf ca. 3,25 x 3,25 x 3,30 m Feuerlöschsystem Siemens Sinorix TM Knoll Filteranlage VL1500/8000 Bj.2017 Ölnebelabscheider 3NINE NINA 1200 Wekal Ladezelle Schleifscheiben

Kondisi: bekas, Tahun pembuatan: 2012, Maximum wheel diameter: 300 mm Wheel width: 320 mm Module – max.: 10 Module – min.: 0.5 Maximum helix angle: 45° Frequency: 50 Hz Voltage: 400 V Main fuse: 125 A X-axis: 270 mm Y-axis: 250 mm Z-axis: 320 mm A-axis: +/- 45° B-axis: 360° C-axis: 360° Total power requirement: 89 kW Machine weight approx. 23.5 t Space requirement approx. 11.2 x 5.5 x 2.9 m Automated Oil centrifuge station EWAB workpiece storage Hoffmann coolant filtration system HSF 100 SE/K Bjdpex R U Haofx Am Tswn Minimax fire extinguishing system W+W air filtration system Promot Automation "Cellmaster" (3 cells), year of manufacture 2019

Kondisi: bekas, Tahun pembuatan: 2003, Wheel diameter – max. 275 mm Wheel width 58 mm Module – max. 13 Module – min. 2 Control system SINUMERIK 840 D Number of teeth min./max. 5 - 200 Maximum gear ratio 10:1 Cutter diameter max. 228 mm X-axis 25 - 350 mm Y-axis +/- 175 mm Z-axis 125 - 600 mm B-axis -5 / +90° Bwjdpox R U E Nofx Am Ton Total power requirement 75 kW Machine weight approx. 11.7 t Space requirements approx. 12.5 x 3.0 x 3.0 m Equipped for dry milling Deburring press Deburring unit with powered brush Integrated magnetic chip conveyor Promot Cellmaster Cartridge pulse filter system

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Double-sided edge sanding line consisting of two machines, each equipped with 6 sanding units. Bedjuyizcjpfx Am Town

Kondisi: siap digunakan (bekas), 1 Bwedpfxsyw Hxne Am Ten

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Double-sided fully automatic coating line Working width of the line: 1300 mm The line consists of the following equipment: - Vacuum loader - Automatic feeder before coating - GIARDINA Dualtech 416 coating machine - 2 x 12m hot air drying tunnels - UV dryer with 3 lamps - Material turner - RICHFRUITS coating machine - 2 x 12m hot air drying tunnels - UV dryer with 3 lamps - Vacuum loader The machine is operational, connected, and in very good condition. Bwsdpfxstut Dxe Am Ton

Kondisi: bekas, Test bench, test station, measuring station, test device, measuring instrument, tester for HV, PE, and insulation measurement ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High Voltage Test Device The PE/IS/HV SCT 42 / 91-3J.3 is used for measuring dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement Bjdpfx Aof Axn Ajm Town - Protective conductor voltage drop measurement The unit 90-1V supplies a highly stable DC voltage with low ripple. One output pole carries the high voltage, the other output pole is near earth potential and can be set to a maximum of 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connector unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as pictured Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices available under stock numbers 57819, 57820, and 57821.

Tahun pembuatan: 2026, Kondisi: baru, hobelmaschine_winter_duomax_400_hu Bjdpsyk Ibpsfx Am Tswn

Tahun pembuatan: 2026, Kondisi: baru, Hobelbreite 610 mm WINTER DUOMAX 610 CE SPIRAL Maschinenbeschreibung Bjdpfx Ajyk Ibcom Town

Tahun pembuatan: 2017, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, II. ALAT UNTUK UJI TEGANGAN PADA KACA TEMPERED TIPE JF-1 (GLASS SURFACE STRESS METER TIPE JF-1). Bsdpfx Ajw T Rq Sem Tjwn Alat JF-1 digunakan untuk menguji kualitas tempering kaca melalui pengukuran tegangan permukaan kaca tempered secara non-invasif. Paket lengkap meliputi: layar PDA, kepala optik, adaptor daya, sensor UV, cairan refraksi, kabel USB, standar acuan, perangkat lunak, dan buku petunjuk penggunaan. Tambahan: cairan refraksi 50 ml. Kondisi: bekas, berfungsi baik.

Kondisi: bekas, Tahun pembuatan: 2008, fa512b7e Bwjdpfx Asyv Ipfem Tsn

Kondisi: bekas, Tahun pembuatan: 2006, tr-001 Bedpfx Amjyvvlbe Tewn

Kondisi: bekas, Tahun pembuatan: 2007, Maximum gear cutting diameter: 2,000 mm Workpiece diameter: 2,700 mm Table diameter: 1,500 mm Maximum module: 22 Control: 840D Rotational speed: 3.5 rpm Maximum table load: 20,000 kg Centre distance: 70 – 1,220 mm Stroke length: 30 – 330 mm Strokes per minute: 10 – 200 spm Bwedpox R U Hmjfx Am Ten Total power requirement: 138 kW Machine weight: approx. 38 t Space requirements: approx. 11 x 5 m Machine: Fully CNC machine with electronic gear coupling for C and D axes and digital INDRAMAT drive technology. Self-rigid machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with overhang, Longitudinal guide with recirculating roller shoes. Ground, preloaded ball screw with backlash-free preloaded nut. Digital AC drive technology with backlash-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically backlash-free preloaded double worm gear, pitch circle diameter 1,365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Through-table bore diameter 500 mm, open downward. Water-cooled digital AC servo motors. The machine must be installed on a foundation. Column: Machine column as high-rigidity cast construction for axial travel 1,200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and overhang with recirculating roller shoes. Ground ball screw with backlash-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Gear Shaping Head: SK 4.1 with hydraulic NC servo drive for stroking spindle movement and cutter lift-off, stroke length 330 mm, stroking spindle diameter 160 mm. Hydrostatically mounted stroking spindle, straight guide, and lateral guide for cutter lift-off. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Stroke rates from 10 – 200 spm, stroke speed from 5 – 45 m/min. Stroking spindle speed for cutting and return stroke can be independently programmed. Spindle speed is constant in the cutting area. Maximum cutter head rotational speed: 10 rpm, digital AC drive technology. Cutter lift direction manually reversible for internal and external gearing. Lateral offset of the stroking spindle axis by up to 50 mm from machine center manually adjustable to avoid collision of cutter during return stroke.

Kondisi: baik (bekas), Gear motor, electric motor, three-phase motor, geared electric motor - Speed: 4 rpm - Power: 0.37 kW - Design: B3 - Shaft diameter: 60 mm - Protection class: IP 44 - Quantity: 1 available - Price: per piece - Dimensions: 800/300/H350 mm Bwedpfxeciw Smj Am Tsn - Weight: 68 kg

Kondisi: bekas, en Bodpof Dlzusfx Am Town

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, pl-hu-001 Bodpfx Amoyt Sahj Tswn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: 10229, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 25.000 h, daya: 13 kW (17,68 hp), tegangan masuk: 400 V, arus masuk: 32 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, lebar sabuk penghalus: 200 mm, panjang sabuk penggiling: 1.800 mm, tinggi penggerindaan: 190 mm, jenis penyesuaian ketinggian: listrik, jenis aktuasi: listrik, tinggi total: 1.890 mm, panjang total: 2.070 mm, lebar total: 1.020 mm, berat keseluruhan: 1.500 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, Mesin dalam kondisi sangat baik, jarang digunakan, dengan kemungkinan rekondisi menurut kesepakatan. Bsdpfx Aoyt Hkusm Tswn

Kondisi: baik (bekas), Tahun pembuatan: 2002, Mountable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Cutter head mounting plate diameter (Ø) 360 mm Mounting taper nominal diameter for cutter heads Ø 58.227 mm Travel distance - Z axis 200 mm Recording diagram magnification ±10 - ±500 µm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gearing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely set cutter heads. The Oerlikon cutter head setting and testing device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measurement process on the CNC-controlled inspection device is semi-automated: The respective actions required for the process are clearly displayed on the screen via operator guidance. The positioning of the individual cutters in the cutter head and the height of the cutter tips is performed largely automatically via a special process and is simultaneously documented in a run-out diagram. A subsequent measurement process checks the radial position of the inner and outer cutting edges of all cutters in the cutter head. If certain test parameters of the cutters do not comply with tolerance specifications, they can be individually re-positioned. Through the combination of a semi-automated adjustment process, operator-guided Bodpew N S E Aofx Am Town setup actions, and an automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and inspection process - Graphical display of the cutter head configuration and measurement results with tolerance check - Plain-language instructions for the operator (no encoded information) - Easy allocation of measurement results to individual cutters - Documentation of setting and measurement results via printer - Setting and inspection procedure suitable for blade-type cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data