Beli Saspi Ef-00 bekas (35.669)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg Crjdpfeh Ek Dajx Ag Dsb - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. Csdpfemhh Ansx Ag Dsrb When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) Csdpemhhf Ssfx Ag Derb - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Crjdsmhhl Hspfx Ag Djb Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Crodpfxemidyfo Ag Dsb Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: Crjdpfxemkixwo Ag Dsb - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Csdpfemhh Dtex Ag Dsrb - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat kosong: 128 kg, berat muatan maksimum: 622 kg, berat keseluruhan: 750 kg, konfigurasi gandar: 1 as, panjang ruang muatan: 2.010 mm, lebar ruang muat: 1.067 mm, tinggi ruang muatan: 400 mm, panjang total: 2.910 mm, lebar total: 1.500 mm, tinggi total: 900 mm, kecepatan maksimum: 100 km/j, rem trailer: trailer tanpa rem, Tahun pembuatan: 2026,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, lebar ruang muat: 2.000 mm, panjang ruang muatan: 2.400 mm, tinggi ruang muatan: 2.600 mm, nomor mesin/kendaraan: Sanitärcontainer Module T, Perlengkapan: air panas, kamar mandi, pencahayaan, pendingin udara, shower, unit pendingin, ENGLISH\n\nSanitary container | Wheelchair-accessible sanitary container | Disabled WC\n\nBuy barrier-free WC container 4.8 m² NEW | Wheelchair-accessible sanitary container | Disabled WC SC-A2000.1\n\nPurchase a barrier-free WC container directly from the manufacturer – wheelchair-accessible sanitary container (4.8 m²), ready for immediate use. Ideal for public facilities, construction sites, and events.\n\nBuy barrier-free WC container – wheelchair-accessible sanitary container 4.8 m²\n\n“Manufacturer of modular containers – tailor-made solutions according to your requirements, including custom dimensions and high-quality interior fittings.”\n\nThe barrier-free WC container SC-A2000.1 from MODULE-T Germany GmbH is the ideal solution if you are looking to buy a disabled WC container. With a generous area of 4.8 m², this barrier-free sanitary container provides ample space for comfortable, safe, and standard-compliant use.\n\nThanks to its wheelchair-friendly equipment, robust steel construction, and ready-to-connect design, this WC container is operational immediately and is ideal for both mobile and permanent use.\n\n👉 Buy your barrier-free WC container now – new, safe & direct from the manufacturer\n\n🟩 Fields of Application\n\n- Barrier-free WC containers for construction sites\n- Disabled WC for public institutions & municipalities\n- Sanitary containers for events\n- WC containers for schools & educational facilities\n- Mobile barrier-free sanitary solutions\n- Sanitary containers for outdoor areas\n\n🟩 Your Advantages at a Glance\n\n✔️ Barrier-free WC container – equipped for wheelchair access\n✔️ 4.8 m² area – maximum freedom of movement\n✔️ Standard-compliant sanitary solution for public use\n✔️ Ready for immediate operation\n✔️ Robust steel construction – durable & stable\n✔️ Hygienic, easy to clean & low maintenance\n✔️ 100% new – no rental or used containers\n✔️ Directly from the manufacturer – top price-performance ratio\n\n🟩 Technical Data\n\n- Model: SC-A2000.1\n- Dimensions: 2,400 × 2,000 mm\n- Area: 4.8 m²\n- Interior height: 2,400 mm\n- Exterior height: 2,600 mm\n\nConstruction:\n\n- Welded, powder-coated steel frame\n\nWalls:\n\n- 50 mm PU sandwich panels or reinforced insulated walls with 100 mm insulation thickness\n- Optional: reinforced insulation / mineral wool\n\nFloor:\n\n- 3mm PVC covering on 16mm fiber cement board\n- Water-resistant & durable\n- Floor drain grate\n\n🟩 Standard Equipment Included\n\n- Disabled-accessible WC “CE”\n- Grab handles for maximum safety\n- Wash basin at ergonomic height\n- Wide entrance door for wheelchair access\n- Pre-wired for water & waste connections\n- LED interior lighting\n- Exterior lighting\n- Power sockets & light switches\n- Integrated fuse box “CE”\n\n👉 Ready for use immediately, no additional installation required\n\n🟩 Optional Equipment\n\n- Hot water boiler\n- Soap dispenser & hand dryer\n- Electric heater or air conditioning\n- Stainless steel sanitary components\n- Custom RAL colour design\n\n🟩 Delivery & Installation\n\n🚚 Delivery in Germany & Europe: approx. 45 days\n📦 Delivered assembled or flat-pack\n⚡ Immediately ready for use after connection\n\n🟩 Why MODULE-T Germany?\n\n- Over 15 years of experience in container construction\n- Specialist for sanitary containers & WC containers\n- Europe-wide delivery & projects\n- Directly from the manufacturer – no intermediaries\n\n🟩 Call-to-Action\n\n👉 Buy your barrier-free WC container now or request an offer\n👉 Secure Crodpfey Da Dwox Ag Deb

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, saspi-gv4-30 Crjdpfxow Uhrie Ag Djb

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 1.041 h, kapasitas angkut: 11.000 kg, tinggi angkat: 5.770 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 3.275 mm, jenis penggerak: Elektro, Reach truck Tipek tiang: Triplex Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: sangat baik Tipe ban depan: Poliuretan Tipe ban belakang: Poliuretan Tegangan baterai: 80V Csdpfx Aoxgmcijg Djrb Sisi geser, alat penyetel garpu, Katup ke-3, katup ke-4,

Kondisi: baik (bekas), Tahun pembuatan: 2017, Pabrikan: DENIOS Tipe: PolySafe Euroline F2-200 Tahun pembuatan: 2017 Kapasitas beban: 760 kg Kapasitas beban untuk pengaturan rak: 620 kg Kapasitas penampungan: 220 l Codpfxjyx Sl As Ag Djrb Kapasitas penampungan total: 240 l Material: PE-HD Izin: Z-40.22-538 Jumlah unit: 4

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Omnia 500 FT – Left Configuration | 180,000 eggs/hour | Very Clean Condition Description Very well-kept MOBA Omnia 500 FT egg grading machine with a capacity of 180,000 eggs per hour. This machine has always been professionally maintained and is in excellent condition. The detection systems are fitted with the latest software versions. The machine will soon be taken out of production and can still be inspected in operation and tested by quick decision-makers. Cedpfxoy A Hn Tj Ag Dsrb Technical Data Feature Specification Type Omnia 500 FT Year of manufacture 2009 Operating hours 29,900 Capacity 180,000 eggs/hour Setup Off-line Configuration Left configuration Configuration Details - 18 packing lanes - 16 sealers - Double hygienic rollers - Contiflow discharge lanes - Standard discharge lanes - Crate conveyor - Contiflow system for automation/robotization Modules / Options - Crack detector - EggInspector - UV unit - FL loader - 5 x Videojet inkjet printers Machine Condition - Very clean machine - Always serviced by MOBA - Maintenance carried out without compromise - Latest software versions installed - Soon to be out of production - Still available for testing (for quick buyers) - Fully cleaned - Equipped with a fully functioning Contiflow system and transport rails - Only robots need to be purchased for full automation Delivery - Dismantling possible - Ready for transport - Transport and installation possible (optional) Details - Available very soon - Complete and heavy-duty version - Ideal for high-capacity egg processing Disclaimer All information has been compiled to the best of our knowledge; no rights may be derived from it. Sale in current condition unless otherwise agreed. Please contact Bos Technical Support BV without obligation. Egg grading machine, packaging machine, egg sorting machine, grading line, MR 40 palletizer, Maxipack, Moba, Sanovo, Staalkat, Prinzen, Rational, Kletec, Yaskawa

Kondisi: bekas, Tahun pembuatan: 2024, jam operasional: 238 h, kapasitas angkut: 10.000 kg, tinggi angkat: 4.800 mm, pengangkatan bebas: 1.580 mm, jenis bahan bakar: listrik, tinggi konstruksi: 3.000 mm, lebar kerangka garpu: 2.400 mm, panjang garpu: 2.400 mm, berat kosong: 15.340 kg, panjang total: 6.650 mm, jenis penggerak: Elektro, lebar konstruksi: 2.242 mm, Forklift Listrik 4 Roda Titik beban: 600 mm Lebar garpu: 160 mm Cjdpfx Agevdvyvo Dorb Tebal garpu: 80 mm Kelas ISO: ISO Kelas 4 = 5.000 - 10.000 kg Tipe mast: Triplex visibilitas penuh Jenis ban depan: Super elastik Ukuran ban depan: 9.00-20 Jenis ban belakang: Super elastik Ukuran ban belakang: 9.00-20 Tegangan baterai: 309V Tahun baterai: 2024 Deskripsi: Diperlukan stop kontak 32 ampere untuk pengisian daya Lampu kerja belakang, lampu kerja depan, kabin penuh, AC, lift bebas penuh, ban kembar, lampu keselamatan,

Kondisi: sangat baik (bekas), jarak tempuh: 898.767 km, daya: 316 kW (429,64 hp), pendaftaran pertama: 05/2006, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, bahan bakar: diesel, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 3, suspensi: baja-udara, Tahun pembuatan: 2006, Perlengkapan: ABS, derek, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik, spion elektrik, spoiler,

Kondisi: sangat baik (bekas), pendaftaran pertama: 09/2015, panjang ruang muatan: 20.180 mm, lebar ruang muat: 3.000 mm, warna: lain, Tahun pembuatan: 2015,

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 03/2009, warna: lain, Tahun pembuatan: 2009, Bobot kosong: 7.340 kg Poros 1: kiri 8 mm, kanan 8 mm Poros 2: kiri 8 mm, kanan 12 mm Poros 3: kiri 8 mm, kanan 10 mm Csdpfsy A Rq Eox Ag Djrb Kami memiliki kemungkinan untuk menumpuk trailer!

Kondisi: baru, berat muatan maksimum: 40.320 kg, berat keseluruhan: 50.960 kg, konfigurasi gandar: 3 gardan, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: baru, berat muatan maksimum: 58.860 kg, berat keseluruhan: 73.000 kg, konfigurasi gandar: 3 gardan, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: baru, berat muatan maksimum: 36.020 kg, berat keseluruhan: 48.000 kg, konfigurasi gandar: 3 gandar, lebar total: 2.540 mm, Perlengkapan: ABS,

Kondisi: baru, berat muatan maksimum: 37.980 kg, berat keseluruhan: 48.000 kg, konfigurasi gandar: 3 gandar, Perlengkapan: ABS,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, nomor mesin/kendaraan: 52180, - Type: TB-21.65/J35 - Width: 620 mm Csdpfx Asvvaq Nsg Djrb - Weight: 550 kg - Capacity: 0.43 m³ - Mounting: CW 30/40

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 10 kg, jangkauan lengan: 1.100 mm, de-001 Cedpfxsq Dz Udo Ag Djrb

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 02/2015, panjang total: 14.040 mm, lebar total: 2.600 mm, suspensi: udara, ukuran ban: 385/65 R 22.5, jarak roda: 9.010 mm, Tahun pembuatan: 2015, Perlengkapan: ABS,

Kondisi: bekas, Tahun pembuatan: 1999, Turning diameter 500 mm Turning length 1500 mm Control system Manual Plus Spindle bore diameter 70 mm Speed range 8 - 2800 rpm Number of gear steps 3 Max. swing diameter over cross slide 290 mm Spindle nose DIN 55027 size 8 Tool holder type C Quill stroke 180 mm Machine weight approx. 3.2 t Dimensions L x W x H 3.0 x 1.8 x 1.8 m Machine description: This machine is suitable for turning chuck and shaft workpieces. Commercially available steel grades, cast iron, copper, aluminium, brass, gunmetal, and machinable plastics can be turned on this machine. --> N.E.F. plus concept The machine is supplied as standard with the following equipment: - Cycle control - AC main drive - Compound slide with AC drive and control panel - Tailstock movable with tailstock clamp, manually clamped, equipped with subsequent center - Coolant supply - Swarf protection covers, manually operated - Safety cover for the chuck - Quick-change tool holder Hahn & Kolb Multifix C - Reducing ring for spindle Accessories as per pictures: - 2 pcs steady rests - Various clamping jaws - Hahn & Kolb Multifix type C - Various turning tool holders Technical data: Working area: - Swing diameter over bed: 500 mm - Swing diameter over cross slide: 285 mm - Chuck diameter: 250 (315) mm - Cross slide: 260 mm - Distance between centers: 1000/1500 mm Spindle: - Spindle nose DIN 55027: size 8 - Spindle bore diameter: 70 mm - Taper of spindle nose: 80 metric Codpfxjub Amlj Ag Derb - Spindle diameter at front bearing