Beli Compactsystem Martina 120 bekas (9.704)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. Fpjdpfovz Hhxox Alysk The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. Fpsdpovz Hq Tsfx Alyjk They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar Fpjdpfsvz Hqgox Alyek - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa Fpedpfx Aljvz Hqmoyjk - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar Fpsdpfx Alevz Hqtjysk - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. Fjdovz Hqyepfx Alyopk - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet Fpsdpevz Hq Hofx Alyek The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: sangat baik (bekas), translation_001 Fjdpfozrub Dox Alyepk

Kondisi: sangat baik (bekas), 7446 Fpjdpfxezrmtlo Alyjk

Kondisi: diremajakan ulang (bekas), Mixer spiral Diosna SPV 120 AD - Mesin untuk 120 kg adonan - 2 wadah - Mesin setelah diperbaiki - 2 pengukur waktu - Kondisi ideal - Pengikis dan tampilan suhu adonan Harga berdasarkan permintaan. Fsdpsztz Ugofx Alyjpk

Kondisi: sangat baik (bekas), 6913 Fodpfx Aszlp Ncjlyepk

Kondisi: baik (bekas), Mesin Stamping Panas Cauhe S-IV A 120×160 Mesin ini berfungsi dengan baik, seperti baru. Dibuat di Spanyol. Fsdpfx Alezlaitjyjpk Ukuran: 1200x1600mm Berat: 10.000 kg Sumber daya: 380V Motor: 11 kW Gaya tumbukan: 2 Tm/dm² Peralatan: – Kopling dan rem pneumatik – Panel kontrol – Pelat pemanas ukuran penuh dengan 3 bagian pemanas – 3 mode operasi: kontinu, penundaan waktu, manual – 3 pengumpan foil independen – Pelumasan otomatis terpusat – Pelindung keselamatan tambahan – Peralatan operasi – Pelat penekan

Kondisi: sangat baik (bekas), 7480 Fedpfx Aljzkubnoyjpk

Kondisi: bekas, 🧰 Fitur Produk • Kondisi: Barang bekas, lihat foto • Warna: abu-abu • Bahan: Logam • Dimensi luar: 124 x 83,5 x 97 cm • Kapasitas beban: 1000 kg • Kapasitas beban tumpuk: 5000 kg • Berat: 78 kg • Bagian depan: dapat dilipat • Dasar: dasar logam dengan lapisan kayu 💰 Harga € 99,- bersih, belum termasuk PPN • Diskon kuantitas: berdasarkan permintaan • Biaya pengiriman: tersedia di seluruh Eropa, berdasarkan permintaan • Waktu pengiriman: tersedia segera • Pemeriksaan dan pengambilan: dapat dilakukan kapan saja setelah perjanjian Selalu tersedia lebih dari 5000 meter rak palet dari berbagai produsen (Perubahan dan kesalahan dalam data teknis, spesifikasi, dan harga, serta penjualan antara waktu, dicadangkan! Lihat Ketentuan Umum kami, semua harga tidak termasuk PPN, berdasarkan harga di gudang.) Lenox Trading – Peralatan gudang & rak beban berat terbaik, bekas & baru Teks deskripsi: Apakah Anda mencari rak gudang berkualitas tinggi untuk dibeli? Dengan sekitar 100 karyawan sendiri, Lenox Trading adalah salah satu pedagang terbesar untuk peralatan gudang baru dan bekas di seluruh wilayah DACH (Austria, Jerman, Swiss). ⚡ TERSEDIA SEGERA: • Lebih dari 10.000 meter rak tersedia untuk pengiriman segera • 20.000 m² platform gudang & platform baja tersedia segera • 30-50 truk trailer per minggu untuk pergantian barang, memberikan pilihan maksimal 📦 RANGKAIAN PRODUK KAMI (BELI SECARA ONLINE DENGAN HARGA TERJANGKAU): Baik itu rak palet, rak beban berat, rak tinggi, rak rak, rak ban, atau rak untuk wadah IBC – kami mengirim dan memasang di seluruh Eropa dengan tim KAMI sendiri! Termasuk perencanaan CAD, transportasi, pembongkaran, dan pemasangan. 🏭 MEREK TERBAIK, BEKAS & DARI LIKUIDASI KEPABANKRUTAN: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Tipe MPB, Tipe E, rak beban berat Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Rak lengan cantilever (Rak lengan cantilever Elvedi, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner Fedpfxevb T Ews Alyjpk 🔨 BISNIS KEDUA KAMI: LELANG ONLINE & LIKUIDASI Untuk pekerjaan pembongkaran dan pembersihan, kami menawarkan paket lengkap yang sesungguhnya: 1. Pembelian sekaligus: Pembelian barang dagangan, peralatan & seluruh inventaris gudang termasuk pembersihan menyeluruh. 2. Lelang berdasarkan komisi: Melakukan lelang atas nama. Layanan lengkap kami oleh karyawan kami sendiri: Katalogisasi, persiapan kantor, pemeriksaan, penyerahan barang, logistik, pembongkaran, dan penyerahan bersih. Baik Anda mengetahui tentang kami melalui rak beban berat atau mencari rak beban berat galvanis / sistem rak beban berat – kami menjamin kondisi terbaik. Hubungi kami untuk penawaran tanpa kewajiban!

Kondisi: sangat baik (bekas), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model enables safe, non-intrusive current measurements with high resolution and an extremely wide frequency bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • current range up to 30 A • bandwidth up to 120 MHz • high measurement accuracy and stability • fast range switching • Demag / Auto Zero functions • robust, professional-grade construction • made in Japan Condition: • fully functional Fedpfx Aljyc Idbeyopk • very good visual condition • equipment sourced from laboratory / industrial decommissioning Included with the set: • Hioki CT6711 current probe • control module • complete set of cables • original hard carrying case • manufacturer documentation (manuals) Ready for immediate use – no hidden defects. Applications: • AC/DC current measurements • power electronics • research and development (R&D) • servicing of inverters, power supplies, drives • laboratories and maintenance departments

Kondisi: bekas, Termasuk dalam paket: 01x Balok rak pallet, bekas Warna material: kuning Tipe balok: 7BB Profil kotak: 120 x 50 mm Tipe: balok kepala Kait: 3 pengait Lebar bersih: 2.700 mm Maks. beban per sepasang balok: 3.000 kg, dengan distribusi beban merata 02x Pen pengunci, bekas Tipe: sepenuhnya galvanis Untuk pengamanan batang memanjang dari terangkat tidak sengaja Kontak di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang barang: Barang ini hanya ditawarkan untuk pengambilan sendiri. Pengiriman atau transportasi lebih lanjut dikenakan biaya tambahan yang akan diinformasikan secara terpisah menurut lokasi pengiriman dan volume. Fpedoy Nxf Dspfx Alyok

Kondisi: baik (bekas), Technical data for pallet rack beam: Racking system: Stow Type: Pal Rack NS Fpjdpfewqc Rgsx Alysk Scope of delivery includes: 01x pallet rack beam, used Material color: RAL 2004 orange Box profile: 120 x 50 mm Beam type: PNB0442 Connector: 4 HK (hooks) Clear span: approx. 3,600 mm Max. load per pair of beams: 2,058 kg with evenly distributed load 02x locking pins, used Finish: completely galvanized For securing the cross beams against accidental lifting Note: Some beams have 5-6 holes on the side. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us depending on the delivery location and quantity.

Kondisi: baik (bekas), 1 Fjdpfx Alsxckftoyspk

Kondisi: baik (bekas), Technical data for pallet rack beams: Fpjdpfxoykqrdo Alysk Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x pallet rack beam, used Material color: similar to red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Bracket: 4 HK (hooks) Clear width: 2,700 mm Maximum load per pair of beams: 3,380 kg, with evenly distributed load. (Please observe bay load limit) The beams are equipped with a diagonal brace connection! On both the left and right sides at the bracket edge, an angle bracket is welded on! (Depth 90 mm – L: 50x50x5 mm) 02x locking pins, used Version: fully galvanized For securing the load beams Note: The functionality of the beams is guaranteed despite the holes! The beams originate from an SSI project with heat protection plates that were attached with bolts according to manufacturer specifications! Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on this item: This item is offered for self-collection only. If transportation or shipping of this item is required, additional costs will apply. These costs can be requested from us separately depending on the delivery location and scope.

Kondisi: baik (bekas), Technical Data for Pallet Rack Beam: Racking System: Dexion Type: P 90 Scope of delivery includes: 01x Pallet rack beam, used Material finish: Sendzimir galvanized Box profile: 120 x 50 mm Beam type: BX 120|50|13 Connector: 5 HK Clear span: 2,700 mm Max. load per pair of beams: 3,150 kg, distributed evenly across the length (observe bay load). 02x Safety pin, used Design: Sendzimir galvanized For securing the longitudinal beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Fpjdswffygopfx Alyjk General information about the item: This item is offered for collection only. Transport or shipping of this item is associated with additional costs, which can be provided upon request depending on the delivery location and scope of order.

Kondisi: baik (bekas), Technical data for leveling plate: Manufacturer: Bito (L) Included in delivery: 01x leveling plate, used Material color: Sendzimir galvanized Overall width: approx. 120 mm Overall depth: approx. 105 mm Material thickness: approx. 4.00 mm Fpedpfxei Hkn Dj Alyok Hole spacing (center - center): approx. 95 mm Weight: approx. 0.37 kg | each.

Kondisi: baik (bekas), Technical data for compensation plate: Manufacturer: Bito (L) Scope of delivery includes: 01x compensation plate, used Material colour: Sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Fpjdpei Hkn Ijfx Alyek Hole spacing (centre to centre): approx. 95 mm Weight: approx. 0.14 kg | each

Kondisi: bekas, Data teknis untuk pelat penyeimbang: Produsen: Bito, Tipe PRO Cocok untuk plat dasar L; yang terpasang pada tiang rak P1-P3. Termasuk dalam pengiriman: 01x pelat penyeimbang, bekas Warna material: galvanis sendzimir Lebar total: sekitar 120 mm Kedalaman total: sekitar 105 mm Ketebalan material: sekitar 0,5 mm Jarak lubang (tengah ke tengah): sekitar 95 mm Berat: sekitar 0,05 kg / buah Kontak di perusahaan kami: Fodpfxsx Tua Ss Alyepk Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Produk ini hanya tersedia untuk pengambilan langsung. Permintaan pengiriman atau transportasi lebih lanjut akan dikenakan biaya tambahan, yang dapat ditanyakan secara khusus sesuai lokasi pengiriman atau cakupan pengiriman.

Kondisi: baik (bekas), Data teknis untuk balok rak palet: Sistem rak: META Thyssen Paket pengiriman meliputi: 01x balok rak palet, bekas Warna material: oranye Tipe balok: HN 120|20 Profil kotak: 120 x 50 mm Kait: 3 HK (kait) Lebar bersih: 2.700 mm 02x pin pengaman, bekas Desain: seluruhnya galvanis Fpsdpfx Ajxck R Aolysk Untuk mengamankan balok memanjang terhadap pengangkatan yang tidak disengaja Kontak Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Produk ini hanya ditawarkan untuk pengambilan di tempat. Pengiriman atau transportasi produk ini akan dikenakan biaya tambahan, yang dapat ditanyakan secara khusus sesuai dengan lokasi pengiriman atau lingkup pengiriman.

Kondisi: baik (bekas), Included in the scope of delivery: 01x mounting bracket, used Surface finish: hot-dip galvanized Weight: 2.26 kg | each Fpsdpfx Aloi A Ik Isyek Base plate: 100 x 120 x 10 mm (with 4 round holes Ø 10 mm) Mounting flange: 120 x 140 x 10 mm (1 slotted hole 62 x 15 mm)