Beli Cronosstech Hsb 3R 2050X150 bekas (583)

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter rol atas: 150 mm, diameter roll samping: 130 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 6 mm, ketebalan pelat baja (maks.): 6 mm, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, ENGLISH_TRANSLATION_STANDARD_EQUIPMENT Bodpfxjxw D Uds Akaewn - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by motor - Hydraulic up-down movement of rear roll and bottom roll - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top roll driven by planetary gearbox - Rear roll ball system for easy sheet movement - Compliance with EU safety directives - High strength forged steel rolls made from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - Operating manual OPTIONAL EQUIPMENT - Top crane (elevator) for large diameter bending support - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves on shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Extractor system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 MM Pre-Bending: 3/4 mm Bending Capacity: 4/6 mm Top & Bottom Roll: 150 MM Side Roll: 130 MM Min. Bending Diameter: 225 / 750 MM Motor Power: 2.2 + 1.1 KW Bending Speed: 6 m/min Tank Capacity: 25 L Length: 3800 MM Width: 950 MM Height: 1100 MM Weight: 2250 KG

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 15 mm, STANDARD FEATURES * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotors and planetary gearboxes * Foldable hydraulic head for easy removal of bent parts * Easy operation with a mobile control panel * Lower rolls' positions are easily read with two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with roller bearings * Hydraulic balancing system for parallel movement of the rolls * Extended shaft ends for mounting profile and tube bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for assisting large diameter bending * Ground and polished rolls for special applications * Roll sets for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the rolls TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 10/13 mm Bending : 13/15 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bwsdpfsw Sld Rox Akaon Bending Speed : 5 m/min Length : 5150 mm Width : 1500 mm Height : 1550 mm Weight : 9050 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls (up/down) Bedpfew Slctjx Akaswn Precision bending with braked main motor Cone bending and pre-bending system Lower and upper rolls driven via planetary gearbox Rear roll ball system to facilitate sheet movement Compliance with EU safety directives High-strength, forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) Operating manual OPTIONAL EQUIPMENT Overhead crane (elevator) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejection system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic opening top roll head Movable control panel Centrally driven rolls powered by motor Hydraulically operated rear roll and lower roll (up & down movement) Precision bending with braked main motor Cone bending and pre-bending system Upper and lower rolls driven by planetary reducer Rear roll ball system for facilitating sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator’s manual OPTIONAL EQUIPMENT Overhead crane support for large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bedpfx Akow Slcgjajwn Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with mobile control panel * Lower roll positions easily read via two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending with bearing system * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile/pipe bending rolls Bjdpfxjw Slf Us Akaswn OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending * Hydraulic lateral supports for large diameter bending * Ground and polished rolls for special applications * Profile bending rolls * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 9 mm, berat keseluruhan: 5.400 kg, STANDART EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by motor - Hydraulic up-down movement for rear and bottom rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top rolls driven by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - Operating manual OPTIONAL EQUIPMENT - Top crane (elevator) for support in large diameter bending - Hydraulic side supports for support in large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydromotor option Bwsdpew Slbvjfx Akasn TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 350 mm, diameter rol atas: 350 mm, diameter roll samping: 260 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 20 mm, EN STANDARD EQUIPMENT * The upper, lower, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * The positions of the rolls can be easily read via three digital indicators * Easy removal of the bent part thanks to a hydraulically opening head and automatically lifting shaft * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Special ground and polished rolls for special applications * Stepless speed control system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 12/16 mm Bending Capacity: 16/20 mm Upper & Lower Rolls: 350 mm Bwsdpfxow Smdfo Akajn Side Rolls: 260 mm Motor Power: 23.5 kW Rolling Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 30 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly via hydraulic pistons attached to the frame Bwjdpow Sl T Sjfx Akasn * Protected against overload * The upper and side rolls are driven by a hydromotor and planetary gearbox (all 3 rolls are motor-driven) * The positions of the rolls can be easily read with three digital indicators * Easy removal of bent parts thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Rolling: 25/30 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 550 mm, diameter rol atas: 550 mm, diameter roll samping: 450 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 70 kW (95,17 hp), masa garansi: 12 bulan, Perlengkapan: henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, en_STANDART EQUIPMENT * The lower, upper, and side rolls perform linear up-and-down movement by pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically upward-moving shaft enable easy removal of the bent workpiece * Very easy operation with a mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large-diameter bending support * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Bedpexbzptefx Akaswn Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Ideal for rolling round and various diameter materials Bottom and side rolls move vertically with direct hydraulic linear action Bwedpfxjw Slxzo Akajn Protected against overload Top roll driven by electric motor and planetary gearbox; bottom roll driven by universal joint coupling system; two rolls powered rotation Roll positions easily read via three digital displays Hydraulically opening head for easy removal of rolled parts User-friendly with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of shafts Compliant with EU safety standards and CE certified Operator’s manual OPTIONAL EQUIPMENT Remote assistance with NC control Upper crane support for large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Ejector system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending Capacity: 8/10 mm Bending Capacity: 10/12 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 460 mm, diameter rol atas: 460 mm, diameter roll samping: 380 mm, panjang rol: 4.100 mm, ketebalan lembaran (maks.): 25 mm, daya: 38,5 kW (52,35 hp), STANDARD EQUIPMENT * The lower and side rolls are actuated up and down by pistons hydraulically attached to the frame, providing linear movement. * Protected against overload. * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven). * The position of the rolls can be easily read via three digital displays. * Hydraulic opening head and automatically lifting shaft enable easy removal of the bent part. * Very easy operation with mobile control panel. * Welded steel construction frame. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460). * Electronic balancing system (Ø500-550-580-620-680). * Dual-speed operation system. OPTIONAL EQUIPMENT * Automation with NC and CNC control. * Top crane (elevator) support for large diameter bending operations. * Hydraulic side supports for large diameter bending operations. * Hydraulic plate ejector system. Bodpfx Akew Sl I Nsaown * Ground and polished rolls for special jobs. * Infinitely adjustable speed control system. * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll: 460 mm Side Roll: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29500 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 350 mm, diameter rol atas: 350 mm, diameter roll samping: 260 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 25 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Positions of the rolls can be easily read by three digital position indicators * Hydraulic drop-end and automatically upward-moving shaft ensure easy removal of the bent part * Easy operation via a movable control panel * Welded steel frame construction * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll Diameter: 350 mm Side Roll Diameter: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg Bsdpfjw Smb Rjx Akajwn

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 280 mm, diameter rol atas: 280 mm, diameter roll samping: 220 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 16 mm, STANDARD EQUIPMENT * The bottom and side rolls perform linear up-and-down movements via pistons hydraulically connected to the frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gear reducers (all 3 rolls driven by motors) * The positions of the rolls can be easily read with three digital displays * Hydraulic opening head and automatic lifting shaft allow for easy removal of the bent workpiece * Easy operation via mobile control panel * Welded steel construction frame Bwedpsw Smfcjfx Akasn * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for the parallel movement of the shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 320 mm, diameter rol atas: 320 mm, diameter roll samping: 240 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * The lower, top, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload * Top roll and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Easy to read roll positions thanks to three digital displays * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system Bwodsxw Eblepfx Akaen OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16 / 20 mm Bending: 20 / 25 mm Top & Bottom Roll Diameter: 320 mm Side Roll Diameter: 240 mm Motor Power: 20 kW Bending Speed: 1.5 - 5 m/min Length: 4350 mm Width: 1800 mm Height: 1950 mm Weight: 10,500 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 460 mm, diameter rol atas: 460 mm, diameter roll samping: 380 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 38,5 kW (52,35 hp), masa garansi: 12 bulan, STANDARD EQUIPMENT * Lower, upper, and side rolls are moved up and down by pistons hydraulically connected to the machine frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (3-roll drive system) Bwsdpfx Asxd S T Uekaon * Positions of the rolls can be easily read with three digital displays * Easily removable bent workpiece thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with the movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC controller for automation * Top crane (elevator) for supporting large diameter bending * Hydraulic side supports for supporting large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, lebar kerja: 3.100 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the frame * Protected against overload * The upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * The positions of the rolls can be easily read via three digital displays * Easy part removal with a hydraulically opening head and automatically rising shaft * Very easy operation with movable control panel * Welded steel construction body * Forged or rolled SAE 1050 (CK 50) steel shafts, induction-hardened * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 16/20 mm Bending : 20/25 mm Upper & Lower Roll : 380 mm Bsdpfx Akjxw Ecvoaown Side Roll : 300 mm Motor Power : 31.5 kW Rolling Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending round and various diameter materials Bottom and side rolls move vertically via direct hydraulic linear motion Protected against overload Top roll powered by electric motor and planetary gearbox. Bottom roll powered via cardan coupling system. Two rolls are driven Roll positions are easily readable with three digital displays Rolled parts can be easily removed thanks to the hydraulically operated drop-end Very easy to operate with mobile control panel Welded steel construction frame SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel roll movement Conforms to EU safety standards and CE marked Bwsdpfxow Slkko Akaon User manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) support for large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Dual speed adjustment system Stepless speed adjustment Hydromotor driven rotation Discharge/extractor system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, panjang rol: 4.100 mm, ketebalan lembaran (maks.): 16 mm, STANDARD EQUIPMENT * The lower and side rolls are moved up and down linearly by pistons hydraulically connected to the frame * Protected against overloading * The upper and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls can be easily read via three digital indicators * The hydraulically opening head and automatically lifting shaft allow for easy removal of the bent workpiece * Very easy operation with the movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC automation controls * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic plate release system * Induction hardened and polished rolls for special applications Bwsdpfx Aow Smc Iskajn * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2250 mm Height: 2350 mm Weight: 22,000 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, lebar kerja: 2.550 mm, ketebalan lembaran (maks.): 40 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * Lower, upper, and side rolls are operated by hydraulic cylinders attached to the frame, enabling precise up and down linear movement * Protected against overload * Upper and side rolls are driven by hydromotor and planetary reducer (all three rolls are motor-driven) * The position of the rolls can be easily read with three digital displays * Hydraulic opening head and automatic lifting shaft allow easy removal of the bent workpiece * Very user-friendly operation with movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic synchronization system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) support for large diameter bending * Hydraulic lateral supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 2250 mm Bedsxw Ebxopfx Akajwn Height: 2350 mm Weight: 17800 kg

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 100 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 40 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Uprights: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touch Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Bwodpfxjzbrf To Akaen Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis travel Backgauge Fingers 2 units Flat type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Sheet sag prevention structure European Type Quick-Release Tool Clamping System (Promecam E7) Quick die change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Bottom Table 70 mm or 90 mm bottom table (bed) T-slot can be applied according to tools to be used Standard Upper Punch ES1260 Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Meter Compatible with Amada Standard Lower Die ES2067 4-way V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Tons/Meter Compatible with Amada B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic manifold Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Integrated measuring scale Provides operator support Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo motor controlled X and R axis motion X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhances operator safety CE compliant Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touch graphic display 2D drawing and 3D product simulation User-friendly interface 1 GB hard disk Automatic bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction Windows-based operating system 2 USB ports Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Tons Bending Length: 2100 mm Distance Between Uprights: 1600 mm Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 60 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, is specifically designed for precise sheet metal bending applications, featuring a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D touch graphic display Manual bend sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSSTECH Servo-driven X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Precision: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis Backgauge Fingers 2 pieces Flat type 3 steps (10 mm / 20 mm / 30 mm) Manual Z-axis movement Anti-sag design for large sheets European Type Quick Tool Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slot option available based on tooling Standard Upper Tool ES1260 Tool height: 67 mm Tool angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Metre Compatible with Amada Standard Lower Tool ES2067 4-channel V grooves (16-22-35-50 mm) Tool height: 60 mm Tool angle: 85° Material: C45 Maximum capacity: 80 Tons/Metre Compatible with Amada B Series Open Frame Design Black plexiglass safety panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting VDE-compliant electrical panel Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Ruler-based measuring system Operator support Bedpfezbrfaox Akaswn Optional Features Servo-driven X + R-axis Backgauge System Servo-driven movement for X and R axes X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhanced operator safety CE conformity Max operating distance: 4.3 metres Delem DA53Tx CNC Control Unit (15” Touch) 15” color touch screen 2D part drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and diagnostics Technical Specifications Bending Force: 60 Tons Bending Length: 2100 mm Distance Between Columns: 1600 mm Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Main Motor Power: 5.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 270 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 3.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B270-3100 – 270 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B270-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been developed for heavy industry, steel construction, machinery manufacturing, and precision sheet metal forming applications, offering a bending force of 270 tons and a bending length of 3100 mm. Standard Features - Stroke: 260 mm - Daylight (Open Height Between Upper and Lower Beams): 465 mm - Throat Depth: 410 mm - Bending Length: 3100 mm - ESA S830 CNC Control Unit (3-4 Axes) - 10” 2D Touch Graphic Screen - Manual bend sequence and collision control calculation - Automatic angle correction (crowning calculation) - Angle measurement and correction - 2D drawing support - 2 USB ports - Offline programming software - Servo Motorized X-Axis Backgauge System - X-axis travel: 750 mm - Speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Heavy-duty steel frame construction - Hardened ball screw - Hardened linear guide system - Optional 1000 mm X-axis Backgauge Fingers - 2 units - Flat type - 3-stage (10 mm / 20 mm / 30 mm) - Manual Z-axis movement - Structure prevents sheet sagging European Type Quick Clamping System (Promecam Type) - Fast tool change - Secure locking system - User-friendly operation European Type Narrow Lower Table - 70 mm or 90 mm special lower table - T-slot can be applied depending on tooling requirement Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Maximum capacity: 100 Ton/Meter - Amada compatible Standard Lower Die ES2067 - 4-channel V openings (16-22-35-50 mm) - Die height: 60 mm - Die angle: 85° - Material: C45 - Maximum capacity: 80 Ton/Meter - Amada compatible B Series Open Cabin Design - Black plexiglass safety panels - Wide viewing area - Professional appearance - Ergonomic design Additional Equipment - Single pedal system (P2) - GIVI linear encoders - LED lighting on upper beam - Electrical panel in accordance with VDE standards - Electrical components by Schneider or Siemens - High-quality hydraulic block system - Eckerle hydraulic pump - Siemens main drive - Energy-saving standby function Front Support Arms Bwodpfxozbrc Se Akasn - 2 standard sliding front support arms - Height adjustable - Metric ruler measurement system Optional Features - Servo Motorized X + R Axis Backgauge System - Servo controlled X-axis movement - X-axis travel: 750 mm - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Hardened linear guides and ball screw system - X-axis extendable up to 1000 mm - CNC Controlled Motorized Crowning System - Motorized wedge system - Automatic calculation by CNC - Faster setup times - Higher bending accuracy - Longer machine lifespan - Front Safety Laser System + Rear Light Curtains - Laser-based finger protection - Improves operator safety - Fast detection and response - Maximum working distance: 4.3 meters Technical Specifications - Bending Force: 270 Ton - Bending Length: 3100 mm - Distance Between Columns: 2600 mm - Stroke: 260 mm - Daylight: 465 mm - Throat Depth: 410 mm - Table Height: 960 mm - Machine Length: 4840 mm - Machine Width: 2500 mm - Machine Height: 3040 mm - Approach Speed: 150 mm/s - Return Speed: 120 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 290 L - Machine Weight: 12,300 kg - Main Motor Power: 22 kW - Backgauge X-Axis Speed: 300 mm/s - Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 4 kW (5,44 hp), gaya penekanan: 40 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 1.250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB A40-1250 – 40 Ton x 1250 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB A40-1250 CNC Hydraulic Press Brake is engineered for precise sheet metal bending applications, offering 40 tons of bending force and a 1250 mm bending length. Equipped with the ESA S630 CNC control unit, servo-driven backgauge system, compact frame design, and professional tooling, it provides an efficient solution for workshops, metal fabrication companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D Touchscreen Graphic Display Manual bend sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 x USB ports Offline programming software CRONOSS Servo Motorized X Axis Backgauge X axis travel distance: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R axis travel: 190 mm Steel frame construction Hardened ball screw spindle Linear guide system Optional 1000 mm X axis Backgauge Fingers Quantity: 2 Flat type 3-stage adjustable (10 mm / 20 mm / 30 mm) Manual Z axis movement European Style Manual Promecam Upper Tool Holder E7 Quick tool change Safe operation Design prevents die from falling CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table Optional T-slot upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Max capacity: 100 Ton/Metre Standard Lower Die ES2067 4-groove V opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Max capacity: 80 Ton/Metre A Series Open Front Panel Enclosure CRONOSS Premium open cabin Wide field of view Ergonomic design Professional appearance Single Pedal System (P2) Encoder Linear Scales Top Beam LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Energy-saving Standby Function 2 Sliding Front Support Arms Height adjustable Rule (scale) measurement system Operator support system Optional Features AKAS II Front Safety Laser System + Rear Light Barriers AKAS® II laser safety system Finger protection system Laser guard at punch height Enhances operator safety CE compliance Max working distance: 4.3 meters Technical Specifications Bending Force: 40 Ton Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Backgauge X Axis Speed: 300 mm/s Bwodpfx Ajzbrcrjkaen Backgauge R Axis Speed: 250 mm/s

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 200 mm/dtk, kedalaman tenggorokan: 410 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-3100 – 100 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B100-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is engineered for precise and repeatable sheet metal bending, featuring a bending capacity of 100 tons and a bending length of 3100 mm. Thanks to its ESA S830 CNC control unit, servo-driven backgauge system, high-rigidity frame construction, and professional tooling, it delivers high performance for metalworking and industrial production facilities. Standard Features - Stroke: 260 mm - Open height (Daylight): 465 mm - Throat Depth: 410 mm - Bending Length: 3100 mm - ESA S830 CNC Control Unit (3-4 Axis) - 10” 2D touchscreen graphical display - Manual bend sequence and collision check calculation - Angle correction calculation (crowning) - Angle measurement and correction - 2D drawing support - 2 x USB ports - Offline programming software - CRONOSS Servo Motorized X-R Axis Backgauge System - X-axis travel: 750 mm - X-axis speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Robust steel frame - Hardened ball screw - Linear guide system - X-axis extendable up to 1000 mm (optional) - Backgauge Fingers: 2 units, straight type, 3 levels (10 mm / 20 mm / 30 mm) - Manual Z-axis adjustment - European Type Quick-Release Promecam Upper Tool Holder E7 - Quick tool change - Safe operation - Practical and ergonomic design - CRONOSS Special Narrow Bottom Table - 70 mm or 90 mm bottom table, depending on tonnage - T-slot available upon request - Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Max capacity: 100 Ton/Meter - Standard Lower Die ES2067 - 4-groove V-opening (16-22-35-50 mm) Bjdpjzbrb Ijfx Akaewn - Die angle: 85° - Die height: 60 mm - Material: C45 - Max capacity: 80 Ton/Meter - Series B Open Frame Cladding - CRONOSS premium open cabin - Black plexiglass safety panels - Wide field of vision - Ergonomic design - Single Pedal System (P2) - GIVI Linear Scales - LED Lighting - VDE Electrical Panel - Schneider or Siemens Electrical Components - Hoerbiger (HAWE) Hydraulic Block - Eckerle Hydraulic Pump - Siemens Drive - Energy saving standby function - 2 Standard Sliding Front Support Arms - Height adjustable - Ruler measurement system - Operator support system Optional Features - CT-BEND Servo Motorized X+R Axis Backgauge System - Fully automatic movement in X and R axes - Manual movement in Z1 and Z2 axes - X-axis extendable up to 1000 mm - CNC Controlled Motorized Crowning System - CRONOSS wedge system - G.E.C. motorized structure - Automatic calculation by CNC - More precise and homogeneous bending - No operator intervention required - AKAS FPSC Front Safety Laser System + Rear Light Curtain - CE compliant safety system - Finger protection function - Maximum working range: 4.3 meters Technical Specifications - Bending Force: 100 Ton - Bending Length: 3100 mm - Distance Between Columns: 2600 mm - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Table Height: 905 mm - Machine Length: 4670 mm - Machine Width: 2230 mm - Machine Height: 2950 mm - Approach Speed: 200 mm/s - Return Speed: 135 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 180 L - Machine Weight: 6780 kg - Main Motor Power: 7.5 kW - Backgauge X Axis Speed: 300 mm/s - Backgauge R Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 40 t, panjang langkah: 160 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 90 mm/dtk, kedalaman tenggorokan: 320 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB NC 40-1550 – 40 Ton NC Hydraulic Press Brake The HPB NC 40-1550 Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, has been designed for precise sheet metal bending applications with a bending force of 40 tons and a bending length of 1550 mm. Thanks to its compact design, NC-controlled axes, high-rigidity steel frame, and user-friendly control system, it offers an efficient solution for workshops, metalworking companies, and industrial manufacturers. Standard Features Stroke: 160 mm Daylight Opening: 380 mm Throat Depth: 320 mm Bending Length: 1550 mm Distance Between Columns: 1260 mm Double-cylinder top beam structure Steel frame and top beam provide high static and dynamic rigidity Adjustable fiber-slide supported top beam system Bwjdpfx Ajzbq U Hekajn High-strength balancing shaft and eccentric bearing system to support parallelism Motorized angle adjustment with in-cylinder mechanical stroke system Wide stroke and daylight opening for a variety of tooling Easy tonnage and bottom dead center adjustment via NC control Hydraulic safety system against overpressure Dual-speed operation (free fall, bending, fast return) Multi-functional foot pedal with emergency stop compliant with CE standards Top-mounted hydraulic power unit with HAWE or REXROTH components SIEMENS, PIZZATO, and BALLUFF electrical equipment LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines per program storage USB data upload and backup capability Standard top and bottom tooling set NC-controlled motorized X-axis backgauge system 500 mm movement range 0.2 mm positioning accuracy Motorized Y-axis angle adjustment Movable control panel Front support arms with linear guides Lower die centering and fixing bolts Programmable precision return function Optional Features Motorized R-axis Special bending tools and dies Custom pedal system with dual hand + foot control DSP or FIESSLER safety systems Extended backgauge system Additional backgauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 40 Ton Bending Capacity*: 4 mm Working Length: 1550 mm Distance Between Columns: 1260 mm Stroke: 160 mm Bending Speed: 10 mm/s Fast Descent Speed: 90 mm/s Throat Depth: 320 mm Daylight Opening: 380 mm Table Width: 100 mm Bottom Table Height: 845 mm Main Motor Power: 5.5 kW X Axis Motor Power: 0.75 kW Y Axis Motor Power: 0.37 kW R Axis Motor Power (Optional): 0.25 kW Backgauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2000 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 3450 kg This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷