Beli Lange B 500 K bekas (72.314)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Formed part edge banding machine with direct glue application to the edge material, suitable for thin and thick edge materials from 0.4 to 3 mm. Rjdpfx Asd Sb Dtjlast • Leak-proof glue pot with glue reservoir from below and rapid heat-up time after machine standstill. Automatic start of the application roller after approx. 8–10 minutes. • Pressure roller driven by gear motor, infinitely adjustable via potentiometer 0–15 m/min. • Automatic edge feed and automatic trimming for straight and shaped workpieces via foot switch • Pneumatic roll separation device, max. 3 x 30 mm • Foil disc D = 600 mm

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical specifications: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with conveyor belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Conveyor feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Drip-proof glue pot with bottom glue supply and quick heat-up time after machine standstill - Flush cutting unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic cutting with knife for cuttable edges - Flush trimming unit: - With vertical scanning and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2mm/15° - Central extraction port Ø 100 mm - 2 chip extraction covers with hose Ø 60 mm - Automatic height adjustment of the top cutter with conveyor feed - Continuous workpiece support, approx. 1800 mm long - Extension workpiece support rail, approx. 300 mm extendable - Rotatable foil carousel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Power connection: 400V, 50 Hz, 3Ph + N - Total power: 3.8 kW - Pneumatic connection: 6 bar Redpewka S Isfx Alajt Dimensions (without foil carousel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 rollers for improved workpiece guidance - Edge infeed synchronized with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with cutter (for trimmable edges) - Three pressure rollers - Belt feed motor: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber covering. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with bottom glue supply and quick heat-up time after machine stoppage - End trimming unit for front and rear edges of workpieces, automatic sensing on the workpiece, pneumatic trimming with cutter for trimmable edges - Flush milling unit with vertical sensing and horizontal guidance, repeatable settings via digital counters, 2 powerful 0.4 kW high-frequency motors, continuously adjustable from 4,000 to 18,000 rpm, cutters Ø 70 mm, Z4, radius 2 mm/15°; central extraction nozzle Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, extendable support rail approx. 300 mm Rjdpfxeytkiue Alast - Rotatable film reel Ø 800 mm Technical specifications: - Min. workpiece width: approx. 80 mm - Workpiece thickness: 10 to 50 mm - Min. workpiece length: approx. 220 mm - Edge thickness: 0.4 to 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Heater output, glue pot: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph+N - Total connected load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm, without film reel Ø 800 - Net weight: approx. 260 kg Availability: short-term Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2016, Mesin bekas Tahun pembuatan: 2016 Kondisi: Saat ini masih dalam produksi Perlengkapan dan data teknis: Bak lem Zona penekan Gergaji pemotong Frais kombi r=2 mm, frais rata Ketebalan benda kerja: 8 - 50 mm Lebar benda kerja minimal: ca. 75 mm Panjang benda kerja minimal: ca. 120 mm Ketebalan tepi: 0,4 - 3,0/5,0 mm Tinggi tepi maks. = tinggi benda kerja + 4 mm (2+2) Koneksi listrik: 400V, 50 Hz, 3Ph Daya total: 3,2 kW Kecepatan makan: 8,0 m/menit Koneksi pneumatik: 6 bar Berat bersih: 550 kg Mesin dapat ditingkatkan dengan: Pisau radius Pisau permukaan Unit pemoles Lokasi: NRW Ketersediaan: Sekitar Desember 2025 Redeynpc Njpfx Alast

Kondisi: baru, Tahun pembuatan: 2025, 1 Rsdpfxsy Eizzo Alaet

Kondisi: baru, konfigurasi gandar: 2 gandar, Tahun pembuatan: 2023,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, nomor mesin/kendaraan: 648, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 347 h, daya: 6,8 kW (9,25 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 5 mm, panjang total: 4.000 mm, berat keseluruhan: 600 kg, Dijual mesin edging Lange B90KF yang terawat dengan baik. Mesin siap dipakai dan masih terpasang untuk uji coba. Termasuk aksesori lengkap dan material dasar. Perlengkapan dan data teknis: Rodpfx Aljyuvk Hoajt - Bak lem - Zona penekan - Unit pra-frais - Pengumpan edging - Unit gergaji - Unit frais - Pisau penyerut Ketebalan benda kerja: 8 – 50 mm Lebar minimal benda kerja: ± 75 mm Panjang minimal benda kerja: ± 120 mm Ketebalan edging: 0,4 – 3,0/5,0 mm Koneksi listrik: 400V, 50 Hz, 3Ph Daya terhubung total: 3,2 kW Kecepatan feeding: 8,0 m/menit Koneksi pneumatik: 6 bar Berat: ± 600 kg Video proses demo baru-baru ini dapat saya kirimkan melalui WhatsApp. Semua informasi tanpa jaminan. Harga netto belum termasuk PPN. Faktur mesin akan diterbitkan.

Kondisi: baru, Tahun pembuatan: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue pot with run-off function optional), HF end trimming station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking, and integrated distance control for contactless activation of processing functions. Suitable for ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying • 3 free spaces for finishing units • 10" color touchscreen. Machine length: 4,030 mm Rsdsw I U Drepfx Alajt Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0 – 2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1,050 kg Options: • Surcharge for radius scraper unit with air blast device + extraction • Surcharge for flat scraper unit + extraction • Surcharge for buffing unit • EVA/PUR glue pot with run-off function • Surcharge for diamond tools, height = 65 mm for pre-milling unit • Riepe spraying system (anti-adhesive) at pre-milling unit • Riepe spraying system (cleaning spray before buffing unit) • Piping system with 90° bend + manual slide valve, mounted on the machine with D=200 mm Availability: short notice Location: Hochheim

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, 67641340f3651 Rsdpfxed Sb Duj Alajt

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (optional EVA-PUR glue pot with draining function), HF cut-off saw station, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated line control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer tape, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying • 3 free spaces for finishing units • 10" color touchscreen • Automatic edge feeding for coil material via a rotatable coil plate D=800 mm • Two counter-rotating, demand-actuated pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free jointing of the workpieces before edge banding • Long infeed fence (650 mm) with support • Teflon-coated, quick-change glue pot with 1.5 kg capacity, drip-proof with bottom glue supply (excess glue is automatically returned to the reservoir), precise glue application by glue roller, separately adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for extended periods but remains switched on). Optional: EVA/PUR glue pot with draining/cleaning function for quick color change • Automatic strip magazine (70 mm capacity) with spiked roller for wooden lippings. • Pressure zone consisting of a powered pressure roller synchronized with the glue roller and two smaller, counter-tapered, spring-loaded pressure rollers ensures optimal bonding of the edge material to the workpiece; digital counter for pressure zone adjustment. • High-frequency cut-off saw equipped with HF motor 0.35 kW, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure clean and accurate cuts, equipped with extraction hood • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with HM-WPL special cutters, suitable for radius, flush, and chamfer milling; horizontal and vertical workpiece tracing; unit adjustment with digital counters for adaptation to different edge types; 2 chip extraction hoods with central extraction ports 2 x Ø 100 mm; height adjustment of upper unit via top pressure. • Corner copying unit: Automatic processing of end edges up to 2 mm edging thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen manages glue temperature settings, automatic temperature reduction during machine idling, activation/deactivation of units, and fault diagnostics; includes digital meter counter for edge material consumption. • LED interior lighting • Optional Riepe spraying systems for anti-stick, NFLY, and cleaning agents Rjdpsd R U Agsfx Alajt Optional finishing units (3 free spaces): • Radius scraper unit: Light scraping action removes any milling marks left by radius cutters, ensuring a perfect finish.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, 67641340e1af1 Rsdpsl Rix Nefx Alajt

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. Rodsl Rix Ejpfx Alajt • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with jointing unit, hot melt glue application for straight workpieces, flush trimming unit with VR function, HF trimming unit, chain feed, double roller upper pressure, and pull-out workpiece support rail. Suitable for ABS and PVC edgebanding rolls as well as fixed lengths from 0.4–2.0 mm and workpiece heights from 8–50 mm. Feed speed: 5.5 m/min • 2 free positions for finishing units • 5.6'' color touchscreen • Automatic edge feeding for roll material via swiveling roll plate D=600 mm • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge banding • Teflon-coated glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustment, electronic temperature control with automatic standby function (prevents burning of glue if the machine is on but not used for extended periods). (Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes.) • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and an adjustable spring-loaded pressure roller, for optimal bonding between the edge material and the workpiece, adjustable via SIKO indicator Rodsip Uzpopfx Alaot • Flush trimming unit for the front and rear edge of the workpiece, incl. VR function (for vertical roundings), HF motor 0.27 kW / 12,000 rpm, automatic tracing on the workpiece, with extraction hood • High-frequency combination trimming station: 2 powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and bevel trimming, horizontal and vertical tracing of the workpiece, unit adjustment equipped with digital counters for setting various edge types, height adjustment of the upper unit with upper pressure • 5.6” color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics • LED interior lighting • Riepe spray systems for anti-adhesive or cleaning agents available as an option Optional finishing units (2 free positions): • Radius scraper unit: Lightly drawing cut to remove possible radius cutter marks for a perfect finish; fine adjustment via digital counter • Surface scraper unit: Lightly drawing cut removes glue residues from the workpiece surface at the glue joint • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm, ensure a super finish on ABS and PVC edge materials

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, 67641340eaae2 Roded R U Acjpfx Alaot

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, One-sided automatic edge banding machine with jointing unit, hot-melt adhesive application on straight workpieces (EVA-PUR glue pot with drain function optional), HF end trimming station, HF routing unit, corner rounding unit, chain feed, double roller upper pressure, extendable workpiece support rail, and signal lamp for workpiece sequence. Suitable for ABS, PVC, melamine, and solid wood veneer edge rolls, as well as fixed lengths from 0.4 – 3.0 mm thick and workpiece heights from 8 – 50 mm. Feed speed: 7.0 m/min • 2 free spaces for finishing units • 10.0” color touchscreen. • Automatic edge feeding for roll material via rotatable roll holder D=600 mm • Infeed fence (400 mm) with support • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean, tear-free jointing of workpieces before edge banding • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the glue pot), fine adjustable glue application by glue roller, separate glue roller temperature setting, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but left switched on). Optional: EVA/PUR glue pot with drain/cleaning function for rapid color change • Pre-cutting shear for roll material up to 3 mm edge thickness • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable spring-loaded pressure roller, ensuring good joint quality between the edge material and workpiece; mechanical SIKO indicator for pressure zone adjustment • High-frequency end trim saw equipped with 0.21 kW HF motor, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean, precise cut, equipped with extraction hood • High-frequency combination routing station, 2 powerful 0.27 kW HF motors with HM-WPL special cutters, suitable for radius and bevel trimming, horizontal and vertical scanning of the workpiece, unit adjustment with digital counters for different edge types, 2 chip extraction hoods with central extraction connectors 2 x Ø 100 mm, height adjustment for the upper unit via upper pressure adjustment • Corner rounding unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, can be activated from the control panel. Optionally single-sided (front or rear edge) or double-sided corner rounding • Rotatable control panel with 10.0” color touchscreen controls glue temperature settings, automatic temperature reduction when not in use, on/off control for units, and error diagnostics • LED lighting inside the cabin • Riepe spray systems for anti-adhesive or cleaning agent available as options Redpfsd R U Adex Alaot Optional finishing units (2 slots available): • Radius scraper unit – Light scraping cut removes possible marks from radius cutters for a perfect finish. Fine adjustment via digital counter. • Flat scraper unit – Gently scrapes glue residue from the workpiece surface at the glue joint • Buffing unit – 2 motors 0.05 kW, 1.50

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA-PUR gluepot with discharge function optional), 2-motor HF cross-cut saw station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, integrated line control for contactless operation of machining functions as well as L-Motion control (18 axes). Suitable for ABS, PVC, melamine, and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece heights from 10 – 60 mm. • Automatic edge feed for coil material via rotatable coil plate D=800 mm • Infeed lineal (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood strips. • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointers ensure clean and tear-free jointing of workpieces before edging Rodjf Tdwcepfx Alast • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot), fine-adjustable glue application by glue roller, separate glue roller temperature setting, electronic temperature control with automatic stand-by function (prevents glue burning if the machine remains on but unused for a prolonged period). Optional: EVA/PUR gluepot with discharge and cleaning function for fast color change • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with pneumatic pressure, ensuring a good bond between edge material and workpiece; program-controlled edge thickness setting with L-Motion motor • High-frequency cross-cut saw equipped with two HF motors 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure clean, precise cutting, equipped with extraction hoods. Pneumatically pivotable from the control panel • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, 3 each L-Motion motors for positioning the horizontal tracing shoes, positioning the vertical tracing shoes, and positioning the multifunction tool. 2 chip extraction hoods, height adjustment of the upper unit with top pressure. • Corner copying unit: Automatic machining of end edges up to 3 mm edge thickness. Equipped with 2 high frequency motors 0.27 kW, switchable from the control panel. Option for single-sided (front or rear edge) or double-sided corner copying. 2 L-Motion motors each for positioning the horizontal tracing shoes and the tool. • Swiveling control panel with 10” color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, on/off for units and fault diagnostics, motorized top pressure, extensive program memory, plus full automatic operation control of machining units.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Kompact and flexible in the smallest spaces. Workpieces receive their finish in just 2.13 meters of machine length. Equipped with a 1.1 kW high-frequency motor jointing unit and diamond-tipped spiral jointing cutter, Teflon-coated glue station, pre-milling unit, and HF multifunctional milling unit, as well as 2 free stations for finishing units, such as a surface scraper or polishing unit. Simple operation via a 3.5" color touchscreen. ► Control system via 3.5-inch color touchscreen ► Jointing unit with 1.1 kW high-frequency motor and diamond-tipped spiral cutter running counter-rotationally for clean, tear-free jointing of workpieces before edge banding ► Teflon-coated glue pot with automatic standby function ► Automatic edge feed with roller table D = 600 mm for edge material in rolls as well as fixed lengths from 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressing of the applied edge ► HF multifunctional milling unit – suitable for radius and flush trimming of the longitudinal edge, as well as for front and rear edges of the workpiece, including vertical corner rounding ► 2 free stations for finishing units, e.g., surface scraper or buffing unit ► Workpiece chain feed with rubberized chain plates and double top pressure rollers ► Pressure beam with centralized adjustment and SIKO display ► Fixed workpiece support (optionally extendable support for large workpieces) ► 400 mm infeed fence with support ► LED lighting in the cabin (optional) ► Processing of workpieces from 10 to 45 mm thickness ► Feed speed 6.5 m/min ► Machine length 2130 mm Redpfx Asrrzklslaot

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar penyapuan: 530 mm, jenis bahan bakar: listrik, jenis penggerak: Elektro, Mesin scrubber dryer Kondisi: Unit baru Kondisi teknis: Baru Tegangan baterai: 24V Kapasitas baterai: 180Ah Jenis baterai: Gel Tahun baterai: 2025 Kondisi baterai: Baru Deskripsi: Unit baru dengan garansi 12 bulan Rjdpfxjyi Impj Alaet

Kondisi: baru, Tahun pembuatan: 2025, en-GB-001 Rsdjyt R N Uopfx Alajt

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), spritzgiesmaschinen_2024_angebot_2stueck Redpfx Asw Ni Ibolast

Kondisi: baru, Tahun pembuatan: 2025, de-hu-001 Redpfx Aljvz Ez Doajt

Kondisi: baru, Tahun pembuatan: 2025, en-GB_Machine_Pro_001 Rodpfxovz Eklj Alajt

Kondisi: sangat baik (bekas), jarak tempuh: 561 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 06/2024, jenis bahan bakar: diesel, konfigurasi gandar: 8x4, jarak roda: 5.100 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 400 l, rem: pengereman mesin, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2024, Perlengkapan: ABS, AdBlue, derek, filter jelaga, kendali jelajah, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, spoiler,

Kondisi: sangat baik (bekas), jarak tempuh: 493 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 06/2024, jenis bahan bakar: diesel, konfigurasi gandar: 8x4, bahan bakar: diesel, rem: pengereman mesin, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2024, jam operasional: 1 h, Perlengkapan: ABS, AdBlue, derek, filter jelaga, kendali jelajah, lampu kabut, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, spoiler,

Kondisi: sangat baik (bekas), Approx. 3,000 m² two-storey steel construction platform Used equipment, good condition, see photos Manufacturer: STOW Length: approx. 58.5 m Width: approx. 54.6 m Height to lower edge: 3.4 m Height to upper edge: 3.7 m Load capacity: 500 kg/m² Constructed with C-profiles and Sigma profiles Bolted with nuts and bolts Longitudinal grid spacing adjustable Floor construction: 38 mm high-density chipboard, tongue and groove Underside white, upper side coated grey Negotiation price: Offer on request! Partial sale possible! Dismantled and loaded Goods are in stock. Transport costs on request. Inspection possible at any time by appointment. Further information on request. Constantly over 5,000 linear meters of pallet racks in stock from various manufacturers. (Subject to changes and errors in technical data, specifications, and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous items from various sectors broom-clean plant clearances business liquidations Fast - flexible - responsive! We also clear out or dispose for insolvency administrators. Write to us with a few keywords and we will get back to you promptly. Rjdjd S S E Uopfx Alast To access our page, please click on our logo!