Beli Mütek Map 750 bekas (4.917)

Kondisi: baik (bekas), Used, good condition. Technically inspected used machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (for example for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optional production of short briquette tablets possible Technical data: Throughput rate up to max. 750 kg/h (depending on material) (e.g. sawdust with a bulk density of 250 kg/m³) An exact statement on throughput can only be made after testing with your material, as this may vary significantly depending on bulk density. Customs tariff number: 84793010 Briquette diameter: 65 mm including 2 m press channel Main motor power: 37 kW Feed screw gear motor: 2.2 kW Compactor screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws Dusdofmqq Ejpfx Airsu PLC control with operating hour counter in switch cabinet Machine bears CE mark Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3800 kg Options at extra cost: Temperature control unit for press tools For maintaining optimal temperature and briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch. Wired ready for operation – essential for functionality including corresponding control system + €7,850 net Guillotine or tablet breaker, For cutting briquettes to length + €6,900 net Connection to compressed air required! Silo for MAP series + €19,940 net – Storage silo above machine – Capacity approx. 6 m³, robust steel construction with agitator discharge and level indicator. Transport pipe / cooling section (nominal size: 4x2m) Every 2 meters €990 net Assembly / commissioning (nominal: approx. 2–3 days on site) Billed by time and material. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Saturday/night hours: 50% surcharge Sunday and holiday hours: 100% surcharge Per diem per technician: depending on country Per car/van and driven kilometer: €0.98 / km Travel and accommodation: reimbursed based on receipts or by flat rate, borne by the client. Testing with customer material: (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for raw material: – Moisture content (atro) must be at least 6% and no more than 15% – Chip length max. 18 mm – Installation temperature: heated space, at least +5°C – Feedstock must be free of metals and mineral impurities. Damage to press tools and/or increased wear may otherwise occur.

Kondisi: baik (bekas), Overhauled used machine *Optional features available at extra cost, see below with full 1-year warranty Ready for delivery approx. 16 weeks after order Technical specifications: Throughput rate up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Includes 2 m press channel Main motor power: 45 kW Feed auger geared motor: 2 x 2.2 kW Compactor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Duedpfj E Dqujx Aireu Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and utilization display for main drive and feed screws Siemens S7/300 PLC control with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 4,500 kg Options: Silo for MAP series (suitable only for one MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT -Temperature control unit for press tools To maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch Fully wired and ready for connection — essential for operation including corresponding control unit €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT -Transport line / cooling section (nominal: 4 x 2 m) Per 2 meters: €990 net Assembly / commissioning (nominal per press: approx. 2–3 days on site) Charged according to actual time; invoiced separately. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Surcharge for overtime: +25% Saturday and night hours: +50% surcharge each Sunday and holiday hours: +100% surcharge each Daily allowance per technician per day: country-dependent Per car/van and driven kilometer: €0.98/km Travel and accommodation billed at cost or by flat rate to the customer’s account. Testing with customer’s own material: (by agreement, up to max. 750 kg) — flat rate €1,970 net ---- Requirements for raw material: - Moisture content (atro) must be at least 6% and max. 18% - Maximum chip length: 20 mm - Installation temperature: heated room, minimum +5°C - The feed must be free from metal and mineral contaminants. Damage to the press tools and/or increased wear may result.

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), MAPLAN MFT 750/160 edition S ini diproduksi pada tahun 2016. Mesin ini adalah mesin cetak injeksi vertikal, ideal untuk pemrosesan plastik yang presisi. Silakan hubungi kami untuk informasi lebih lanjut. Keunggulan mesin Keunggulan teknis mesin Djdpsx U Tihofx Aireuu • Daya terpasang: 84 kW • Tegangan nominal: 3 x 400 V • Tegangan kontrol: 24 V • Jarak keamanan: 310 mm • Waktu berhenti: 128 ms • Jarak berhenti: 62,3 mm • Tinggi platform maksimum: 750 mm • Dimensi platform: 1850 x 1300 mm • Sistem sepenuhnya berfungsi dan telah digunakan dalam operasi 2/3 shift antara tahun 2017 hingga 2022. • Pada tahun 2023, botol semprot sudah dipasang ulang seal-nya dan pelat isolasi telah diganti. Informasi tambahan Mesin masih dalam kondisi tersambung listrik.

Kondisi: seperti baru (mesin pameran), We offer here a second-choice (II. Wahl) column protector from the manufacturer SSI Schäfer for purchase. Scope of delivery includes: 01x Column protector, second-choice Material color: yellow Design: V-shape Dujdpfx Ashr U Troireu Total height: approx. 750 mm Overall width: approx. 124 mm Internal width: approx. 116 mm Total depth: approx. 65 mm Leg dimension: approx. 65 x 65 mm Material thickness: approx. 4 mm Grid/hole spacing: approx. 300 mm Number of holes: 6 pcs. (3 pcs./side) Hole diameter: approx. 9 mm 06x Hexagon bolt: M8 x 35 mm 06x Serrated nut: M8 06x Washer: M8 General information about the item: This item is only available for collection. Additional transport or shipping of this item is subject to extra costs, which can be specified separately depending on the delivery location and scope of delivery. Please contact us for individual quotes.

Kondisi: sangat baik (bekas), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Dusdsh Ei Udepfx Airou Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Post protector, used Material color: yellow Design: V-shape Total height: approx. 750 mm Total width: approx. 100 mm Inner width: approx. 93 mm Total depth: approx. 60 mm Material thickness: approx. 3.50 mm Pitch/hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs. per side) Hole Ø: approx. 11 mm 06x Hexagon bolt: M8 x 35 mm 06x Lock nut: M8 06x Washer: M8 General information about the item: This item is only offered for collection. Should you require delivery/dispatch, this can be arranged at additional cost, which can be provided upon request depending on delivery location and scope. Our services at a glance: (Prices on request) Assembly, installation Our general installation conditions apply Racking inspection Inspection in accordance with DIN EN 15635 carried out as per BGR 234 visual inspection standard for all racking systems Delivery with our own fleet (without unloading)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Batch Mixer Type WBX 1100 - 1 Mixer control system with frequency converter - 1 Knife head, 5.5 kW - 1 manual shut-off valve - 1 separate control panel ("remote control") - Maximum effective volume: 770 liters - Mixing product: plastic granulate - Bulk density: approx. 0.7-0.8 kg/l - Product characteristics: free flowing - Mixing time: < 3 min MACHINE DESCRIPTION Mixing Drum - Horizontal cylindrical mixing drum - End walls bolted to the drum Mixing System - Mixing tools configured as ploughshares or angled blades, bolted to the arms via mounting pockets Bearings - Shaft supported in roller bearing flange housings located outside the mixer Sealing - Shaft sealing via easily replaceable packing glands, with air purge for packing glands Feeding - 2 nozzles with flange, according to specification sheet Ventilation - Via 1 nozzle with flange as per specification sheet - Including filter bag with holder and welded-in protective screen Discharge - Via dead-space-free closing flap, pneumatically operated - 1 discharge nozzle with flange, as per specification sheet Liquid Addition Option - None Inspection and Cleaning - Via 1 flap at the front of the drum (1700 x 550 mm) - Flap secured with quick-release fastener - Operational and accident protection through interlock magnet and limit switch (not wired) Materials - Mixing drum made of: Stainless steel 1.4306 - Mixer shaft made of: Stainless steel 1.4306 - Mixing tools made of: Stainless steel 1.4306 Subject to prior sale Inquiries by e-mail only Note: The machine is in storage and can be inspected on site. Buyer must arrange transportation. This is not included in the offer price. Dsdsza Ap Tjpfx Airouu

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Dsdpsv Rpxlsfx Aireuu Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: seperti baru (mesin pameran), en-demo-unit-with-7-operating-hours-another-machine-available-im mediately-ex-works-neckartailfingen-shredder-mrz-830-customs-tari ff-number-84659600-infeed-opening-800x1000-mm-motor-185-22-kw-400 -v-50-hz-3-ph-blades-reversible-multiple-times-hydraulically-actu ated-pusher-screen-size-as-selected-10-40-mm-weight-approx-1600-k g-dimensions-lxwxh-approx-2290-x-1420-x-1750-mm-turbo-clutch-stan dard-features-include-automatic-star-delta-start-fast-hydraulics- auto-shutdown-when-rotor-idles-rotation-speed-70-90-rpm-for-high- throughput-cycle-control-to-avoid-downtimes-performance-enhancing -step-control-for-hydraulic-pusher-pertinax-guides-for-hydraulic- pusher-vibration-damping-machine-feet-ce-compliant-the-shredder-i s-designed-for-the-size-reduction-of-untreated-wood-chipboard-and -mdf-panels-other-materials-upon-testing-and-approval-by-the-manu facturer-included-30-cm-higher-machine-frame-prepared-for-conveyo r-belt-optional-shredder-accessories-angled-conveyor-belt-eur-877 0-net-horizontal-section-1200-mm-inclined-section-2500-mm-angle-a djustable-0-60-degrees-discharge-height-approx-2000-mm-+-100-mm-o verband-magnet-eur-6780-net-conveyor-and-overband-magnet-control- eur-2750-net-start-and-stop-synchronously-with-shredder-raw-mater ial-requirements-moisture-content-absolutely-dry-must-be-below-30 -metals-and-mineral-contaminants-such-as-sand-stones-etc-lead-to- increased-wear Duedpfx Ajv Sqrpeirju

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net Dujdpfx Ajgl Nlmjirsu * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This is the ideal machine for shredding bulky, lightweight aluminium chips or turnings. Not suitable for processing solid aluminium parts. Included features: + Optimized cutting geometry + Customized pusher control + Load-dependent, hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 40x40 mm, multiple cutting edges can be rotated Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as required (15 - 40 mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dujdpsgmh H Tefx Airju Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Shredder height increase by 30 cm (preparation for conveyor belt) + €2,990 net - Angled conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight, and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal Duedochqxxspfx Airsu • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Djdpfochuvrjx Airsuu

Kondisi: baru, Tahun pembuatan: 2026, en-GB Dedsd Nm Sispfx Airjuu

Tahun pembuatan: 2026, Kondisi: baru, The offer includes only the neodymium overband magnet, not the conveyor belt underneath. Neodymium magnets are among the strongest magnets in the world, featuring extremely high holding force and far outperforming ferrite magnets. Extremely high separation efficiency, depending on material flow height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for a simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet: approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and deflected laterally, exiting the magnetic field region. This overband magnet should be installed approx. 7 - 10 cm above the material flow. *Mounting/suspension to be provided by customer depending on the maximum length of metal pieces. Ideal for separating nails from wood chips. Optionally, can also be used in a suctioned single-shaft shredder. Requirements: Dujdpfxodubpuj Aireu *Your belt width or internal usable width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material streams less than 12 mm high, with chip lengths below 25 mm. ----- Optional, at extra cost: Cross and incline conveyor demonstrators from €8,770 net

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Your Advantages: Dusdpfsfci D Asx Airou + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: -Timer function + €490 net Machine is started manually and switches off automatically after the set time. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Professional machine for plastic shredding Base unit starting from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced power requirement) - Minimal cutting gap between rotor knives and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control system: PLC Cutting chamber opening (top): 600 x 800 mm Parts should be max. approx. 500 x 500 mm* *Height is less critical Dedpfx Aied H R Sxorouu Hydraulically actuated ram Screen perforation of your choice (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage size reduction process with an additional MVZ granulator (screens 5–15 mm) is recommended. Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Additional options at extra cost: - Raise shredder by approx. 25 cm (preparation for conveyor discharge) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet controls + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start/stop for conveyor belt + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metals and mineral impurities such as sand, stones, etc. will cause increased wear. We are happy to arrange a free test using your material at our facility in Neckartailfingen. Alternatively, you can send your material via freight forwarder and we will document the test with photos and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic or extremely hard and heavy plastics, as this will impact system durability. --- Optional next larger machines: Base unit: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Parts should be max. approx. 720 x 700 mm* *Height is less critical from €39,995 net (options according to requirements) Base unit: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Parts should be max. approx. 900 x 700 mm* *Height is less critical from €49,975 net (options according to requirements) Base unit: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Parts should be max. approx. 1,200 x 700 mm* *Height is less critical from €79,975 net (options according to requirements)

Kondisi: baru, Tahun pembuatan: 2026, Delivery time: Approx. 4–5 months Your advantages: + Extremely large cutting unit opening; 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW drive power Technical data: Color: grey / blue Duedpfxsgbkkre Airou Feed opening top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40 (selectable) Tools: 37/70 knives Suction nozzle diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (LxWxH) Weight (approx. kg): 3,500 Optional at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics, for increased output - Preparation for conveyor belt discharge - Conveyor belt - Overbelt magnet HAWK-EYE *For shredding veneer or paper (anything thinner than 3 mm), we recommend a segmented floor. Special option available at additional cost. --- Option: Pusher Extension *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with pusher extension option, the top cutting unit opening is 1300 x 1700 mm, surcharge +14,975.–) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (atro) must be below 20% - Material must be free of metals and mineral impurities. Damage to tools and/or increased wear may result.

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Duedogfm Ryopfx Airju Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, en-GB Dusdpfsxfwdjx Airsu

Kondisi: baru, Tahun pembuatan: 2025, Ideal for shredding straw, polystyrene foam (EPS), leaves, hay, and bread. Throughput is highly dependent on the screen and input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW, 400 Volt (alternatively 9.2 kW or 15 kW available upon request) Optional: *Surcharge for next largest machine with 18.5 kW and larger silo diameter: + €2,750 net Robust steel construction Hardened cutting blades Dusdpfx Aezbizsirju Screen with interchangeable inserts Available perforations: 10, 15, 22, 26, 30, 40, or 60 mm When equipped with electric drive: star-delta switch, overload protection, and 8 m ready-to-plug power cable Blow-out nozzle, 150 mm diameter Suitable for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and a swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (LxWxH) Weight approx. 240 kg Spare part prices and options: 24 hardened blades, €9.90 each net 6 bolts, €14.90 each net 1 screen, €475 net Lid, €290 each net Polystyrene disk, €600 each net

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for increased throughput performance We are happy to offer a free trial with your own material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 15 units, multiple reversible, Optional double knife row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as desired (10-40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% ATRO. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta start - Fast hydraulics - Automatic shut-off when rotor is idling - Speed 70–90 rpm for high throughput rates - Cycle control to prevent idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder upgrades available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco rings: + €1,980 net (Recommended for more than 20% hardwood content) - Double knife row + €995 net - Special scraper + €990 net (Recommended for shredding veneer or paper, or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Angle: adjustable from 0–60 degrees Discharge height: approx. 2,000 mm - Automatic over-belt magnet + €5,980 net Alternatively, fixed magnet block above the conveyor for manual cleaning + €990 net (for minimal metal contamination) Duedpfx Aiob Ny Eyereu - Conveyor and over-belt magnet control + €2,750 net (Start/stop synchronised with shredder), alternatively manual start/stop of belts + €595 net Raw material requirements: - Moisture content (ATRO) must be under 30% - Installation temperature: temperature-controlled area, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to max. 10 pallets per hour *Performance depends on screen and material. Considerably higher throughput for smaller wood residues. Motor: 22 kW; 400 V – 50 Hz – 3 phases Screen: 15/20 mm or as agreed (options from 10 to 40 mm available) Hydraulically operated ram Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: actual unit color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta starter - High-speed hydraulics - Automatic switch-off when rotor idles - Speed 70-90 rpm for high throughput - Cyclic feed control to prevent idle times - Step logic for increased hydraulic ram performance - Pertinax guides for the hydraulic ram - Vibration-dampening machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (for conveyor preparation) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (starts/stops synchronously with the shredder) - Flared feed hopper 1500x1500 mm + €3,480 net Dusdpfxsx Af Rds Airju Raw material requirements: - Moisture content (atro) must be below 25% - Material must be free from metals and mineral contaminants. Tool damage and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, Consisting of Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor and the milling unit feed is activated. The tines of the milling rotor tear the straw from the bale and throw it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical Data – Bale Breaker: - Capacity: 1–2 bales per hour - Up to max. 600 kg/h (depending on sieve size in the straw mill and kW of the straw mill). Without straw mill, the bale breaker alone can process up to max. 900 kg/h of loose straw. - Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) - Milling unit motor: 5.5 kW, 380 Volt - Chain conveyor drive: 0.75 kW, 380 Volt - Dimensions: 3750 x 1730 x 2460 mm (L x W x H) - Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; immediately available Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €2,750 net Technical Data – MHZ with special hopper: - Motor: 15 kW, 380 Volt electric motor - Rotor diameter: 600 mm - Hardened cutting blades - Sieve with exchangeable inserts (10, 12, 15; 22, 30, 45 mm perforation selectable) - With star-delta switch, overload protection and 8 m pre-wired supply cable (plug ready) - Discharge nozzle: 160 mm - Blowing distance: approx. 12 m - Dimensions: 1600 x 1020 x 1360 mm (L x W x H) - Weight: approx. 240 kg --- Optional equipment at extra cost: - Feed screw: + €970 net - Cyclone (customer to provide suspension) *Should be max. 10 m away + €2,970 net - Simple filter: €1,750 net --- Further options: - Industrial extraction system (demo unit) + from €9,950 net Duodpjb Nulhefx Airou - Optional cellular wheel sluice *makes material pressureless + €5,750 net - Control unit: from €1,620 net - Special breaker extension 3 m (other dimensions must be calculated) + €9,750 net - Briquetting press MPP 180 S; demo unit, lightly used 70 mm briquette – up to max. 100 kg/h from €39,700 net *larger machines available on request --- Description: muetek bale breaker has been developed for breaking up round and square bales of hay and straw. The shredder flange-mounted to the bale breaker shreds straw from all types of cereals, as well as hay, maize, and miscanthus. muetek machines from the MHZ / MHB series are characterized by robust construction and heavy-duty design. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale is placed with a front loader. The support is adjustable depending on bale type. The chain conveyor presses the bale against the milling rotor; the feed speed is adjustable. The milling rotor is fitted with multiple teeth to break apart the straw bale. The separated straw is ejected. --- These machines are generally suitable for dry input materials: - Straw - Hay --- Processing hemp bales is only possible with a special breaker Surcharge approx. €9,720 net *depending on version Hemp cannot be shredded with the straw mill. Feed material requirements: Moisture content max. 12%

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Ideal for shredding Styrofoam or similar materials Throughput highly dependent on screen size and input material: - Up to 60 kg/h with EPS using a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW - 400 Volt Robust steel construction Hardened cutting knives Screen with interchangeable inserts Available perforations: (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive equipped with star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 150 mm Optional for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and one swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (L x W x H) Weight approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) Dujdpfxoh S H T Uo Airju 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Kondisi: baik (bekas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Djdpfx Aorb D Njirjuu Airflow rate: 1,850 m³/h, 400 V