Beli Mütek Systemtechnik Mgz-18,5 Kl bekas (4.095)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Dsdpogmfa Asfx Ac Tskp Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Dkjdpfx Aochuvrjc Top

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Dedpfsgl Nlmsx Ac Tskp Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang. Dkjdpfx Acjv Rpxlj Tep

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. Djdpfxogfm Ryj Ac Tskp The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW Dodoffh Atjpfx Ac Tskp 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Dksdpsdwktkofx Ac Tsp Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: baik (bekas), Clean air extraction Dkjdpfx Acerb D Ne Tep Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for increased throughput performance We are happy to offer a free trial with your own material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 15 units, multiple reversible, Optional double knife row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as desired (10-40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% ATRO. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta start - Fast hydraulics - Automatic shut-off when rotor is idling - Speed 70–90 rpm for high throughput rates - Cycle control to prevent idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder upgrades available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco rings: + €1,980 net (Recommended for more than 20% hardwood content) - Double knife row + €995 net - Special scraper + €990 net (Recommended for shredding veneer or paper, or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Angle: adjustable from 0–60 degrees Discharge height: approx. 2,000 mm - Automatic over-belt magnet + €5,980 net Alternatively, fixed magnet block above the conveyor for manual cleaning + €990 net (for minimal metal contamination) Dksdpfx Ajb Ny Eysc Tsp - Conveyor and over-belt magnet control + €2,750 net (Start/stop synchronised with shredder), alternatively manual start/stop of belts + €595 net Raw material requirements: - Moisture content (ATRO) must be under 30% - Installation temperature: temperature-controlled area, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Kondisi: baru, Tahun pembuatan: 2026, Delivery time: Approx. 4–5 months Your advantages: + Extremely large cutting unit opening; 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW drive power Technical data: Color: grey / blue Feed opening top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40 (selectable) Djdegbkkropfx Ac Tekp Tools: 37/70 knives Suction nozzle diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (LxWxH) Weight (approx. kg): 3,500 Optional at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics, for increased output - Preparation for conveyor belt discharge - Conveyor belt - Overbelt magnet HAWK-EYE *For shredding veneer or paper (anything thinner than 3 mm), we recommend a segmented floor. Special option available at additional cost. --- Option: Pusher Extension *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with pusher extension option, the top cutting unit opening is 1300 x 1700 mm, surcharge +14,975.–) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (atro) must be below 20% - Material must be free of metals and mineral impurities. Damage to tools and/or increased wear may result.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to max. 10 pallets per hour *Performance depends on screen and material. Considerably higher throughput for smaller wood residues. Motor: 22 kW; 400 V – 50 Hz – 3 phases Screen: 15/20 mm or as agreed (options from 10 to 40 mm available) Hydraulically operated ram Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: actual unit color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta starter - High-speed hydraulics - Automatic switch-off when rotor idles - Speed 70-90 rpm for high throughput - Cyclic feed control to prevent idle times - Step logic for increased hydraulic ram performance - Pertinax guides for the hydraulic ram - Vibration-dampening machine feet - CE compliant The following options are available at extra cost: Dkjdpfx Aex Af Rdoc Tsp - Raise shredder by 30 cm (for conveyor preparation) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (starts/stops synchronously with the shredder) - Flared feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material must be free from metals and mineral contaminants. Tool damage and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, translate-001 Dkedpfx Acodv Eu Hs Tsp

Kondisi: baru, Tahun pembuatan: 2026, Mesin ideal untuk penghancuran kayu lunak. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Diameter rotor: 260 mm, Djdpfx Aowzarcec Tokp Pendorong digerakkan secara hidrolik Lubang saringan sesuai pilihan (12 - 40 mm) Diameter saluran hisap Ø 160 mm Berat sekitar 1.100 kg Dimensi (p x l x t) sekitar 1805 x 1118 x 1650 mm Warna: biru / abu-abu Persyaratan bahan baku: - Kadar air (atro) harus di bawah 30 % - Logam dan kontaminan mineral seperti pasir, batu, dsb. meningkatkan keausan. Kami dengan senang hati menawarkan pengujian gratis menggunakan material Anda. Anda dapat datang ke lokasi kami di Neckartailfingen, atau kirimkan material Anda melalui ekspedisi dan kami akan mendokumentasikan pengujiannya dengan foto dan video.

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding hardwood and softwood Another machine available immediately (ex works Neckartailfingen) - Motor: 18.5 kW; 400 V - 50 Hz - 3 phase - Knives: 14+2 pieces, 40x40 mm, reversible multiple times - Rotor diameter: 260 mm - Control: Omron PLC - Cutting chamber opening: 600 x 800 mm - Hopper volume approx. 0.6 m³ - Hydraulically actuated ram - Screen perforation selectable (12 – 40 mm) - Extraction nozzle Ø 160 mm - Weight approx. 1,300 kg - Dimensions (LxWxH) approx. 1,737 x 1,167 x 1,650 mm The following options are available at an additional cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the ram from jamming; recommended for materials less than 3 mm thick) Dksdpfx Acsd E R D Ss Tsp - Shredder height increase by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely needed; enclosed, even more durable rotor bearing. Worth considering for screens < 15 mm or for a high proportion of fines. Not necessary if bearings are greased every approx. 2 weeks in operation) Raw material requirements: - Moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear We would be happy to offer you a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Kondisi: bekas, mgz1330-en Dkedpfx Ajx Tfdhjc Top

Tahun pembuatan: 2015, Kondisi: perlu perbaikan (bekas), Fungsionalitas: fungsi terbatas, panjang total: 13.000 mm, lebar total: 4.520 mm, tinggi total: 2.550 mm, nomor mesin/kendaraan: 201507-025, PEMOTONG JET AIR & STASIUN PENYATUAN: Unit ini merupakan bagian dari lini produksi yang lebih besar, silakan lihat juga iklan kami yang lain. Pada unit yang ditawarkan, lembaran mentah EPS/XPS (disuplai secara manual ke dalam magazin) direkatkan pada sisi depan menjadi pita kontinu, kemudian dilakukan pemotongan format dengan pemotong jet air termasuk pemotongan dan milling alur. Stasiun penekan & konveyor sabuk di akhir unit juga termasuk dalam penawaran ini. DIMENSI BAHAN BAKU: Panjang: 1500 mm - 2500 mm Lebar: 600 mm - 1250 mm Tinggi: 20 mm - 50 mm Dodpfxjytp U As Ac Tokp PEMOTONG JET AIR: cut Expert variojet (produsen: expert international GmbH, sebelumnya expert systemtechnik GmbH) INCLUDES: Unit lem (Nordson), spindle milling (Jäger)

Kondisi: baik (bekas), Tahun pembuatan: 1992, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Ecoair, Screw Compressor Model STKL 30 B 18.5 -Free air delivery: 2.5 m³/min -Motor power: 18.5 kW -Operating hours: 2,746 h -Max. pressure: 10 bar -Inlet: 580 x 250 mm Dkjdpfx Acovuy Nvs Tjp -Outlet: 740 x 250 mm -Individual components: see photos -Dimensions: 1100/1000/H1070 mm -Weight: 362 kg

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 1.064 mm, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 50 W, jenis pendinginan: udara, lebar total: 1.500 mm, tinggi total: 2.050 mm, panjang total: 900 mm, jangkauan kerja: 600 mm, berat keseluruhan: 120 kg, masa garansi: 12 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, panjang meja: 600 mm, lebar meja: 600 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.100 mm, panjang gelombang laser: 1.064 nm, tinggi kerja: 950 mm, frekuensi input: 50 Hz, Sistem pelabelan laser serbaguna LAS 28 XLe dari Systemtechnik Hölzer GmbH dapat digunakan untuk berbagai jenis pelabelan. Dengan laser serat terintegrasi, Anda dapat melabeli hampir semua jenis material, seperti baja, logam keras, aluminium, dan plastik. Tergantung pada kebutuhan, sistem ini dapat dilengkapi dengan laser serat 50 Watt. Untuk pelabelan permanen, penggunaan laser kini menjadi suatu keharusan di banyak industri. Dengan perangkat lunak laser yang canggih, teks, angka, kode 2D, kode QR, dan logo dapat dibuat hanya dengan beberapa klik, tanpa memerlukan pengetahuan pemrograman yang mendalam. Perangkat lunak ini secara otomatis menghitung nomor seri dan nomor artikel setelah pengaturan awal. Selain itu, perangkat lunak ini dapat membaca data (informasi variabel seperti nomor gambar, nama proyek, dll.) dari tabel yang ada dan secara otomatis mentransfernya ke area yang telah ditentukan. Penggunaan pemindai genggam juga dimungkinkan. Sebagai perlengkapan standar, terdapat PC terintegrasi dengan sistem operasi Windows dan perangkat lunak laser. Secara opsional, model laser LAS 28 XLe dapat dilengkapi dengan sumbu putar (rak 3 rahang) untuk pelabelan bagian silinder. Opsi lain, seperti lengan samping untuk pelabelan bagian panjang, sumbu Z yang dapat digerakkan, sistem laci, dll., juga dapat diimplementasikan. Dibuat di Jerman Laser serat 50 Watt • Kelas laser 1 • Panjang gelombang 1064nm • Ukuran area penandaan 150x150mm • Lampu sinyal untuk menampilkan status operasi • opsional: sumbu putar (rak 3 rahang) • opsional: sistem penyedot debu (termasuk filter karbon aktif) • Perangkat lunak penandaan EZCAD dalam bahasa Jerman / Inggris (perangkat lunak lain tersedia berdasarkan permintaan) • Laser panduan (pratinjau sederhana, pratinjau teks biasa) • Pencari fokus (pengaturan fokus sederhana) • tinggi komponen maksimum sekitar 300mm • Sumbu Z yang dapat diatur secara elektrik • PC terintegrasi dengan sistem operasi Windows • Layar sentuh IPS PCAP dan penopang keyboard, ketinggian dapat disesuaikan Dedpfoy Urpyox Ac Tskp • Rangka dari profil aluminium • Didinginkan dengan udara • Lebar pintu sekitar 700mm / Tinggi pintu (bukaan): sekitar 400mm • Koneksi 230V • Dimensi: sekitar 900 x 800 x 1900 mm (PxLxT) dengan dudukan layar sekitar 1500 x 800 x 1900 mm (PxLxT) • Berat: sekitar 120 Kg

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, Masih ada satu mesin yang tersedia segera! Mesin sangat kokoh dengan daya tekan tinggi—juga cocok untuk menghasilkan kualitas briket yang bisa dijual* tergantung pada jenis material. Silinder tekan berukuran besar dan diameter briket 80 mm memungkinkan hal ini. Seri mesin briket terlaris kami + Teknologi sederhana dan teruji, sangat minim risiko kerusakan + 25 tahun pengalaman, pengembangan berkelanjutan, dan keahlian + Ribuan mesin beroperasi dengan pelanggan yang puas + Rasio harga-kinerja terbaik Biaya tambahan untuk perangkat pendingin: €4.995 net (bisa ditambahkan kemudian) * Mendinginkan tang penjepit dan oli hidrolik (direkomendasikan jika mesin beroperasi lebih dari ±3,5 jam tanpa jeda) Diameter briket: 80 mm Bushing depan: 125 mm Langkah briket max.: 100 mm Dkjdsxfwdjpfx Ac Tep Langkah briket optimal: 80 mm Kapasitas (tergantung material): hingga 200 kg/jam max.* *tergantung berat jenis *berdasarkan berat jenis 200 kg per meter kubik Daya motor: 9,2 kW 400 Volt / 50 Hz / 3-Phase Panjang: 2095 mm Lebar: 1600 mm Tinggi: 1700 mm Berat: 1250 kg Kapasitas oli: 220 liter Diameter silo: 1200 mm Volume silo: ±1 m³ Pompa: 75 liter Pre-compactor hidrolik Opsi pendinginan tang penjepit: ya, dengan aksesoris khusus Tang Penjepit Berpendingin Opsi pendinginan oli hidrolik: ya Pendinginan tang penjepit dan oli hidrolik dengan perangkat pendingin (aksesoris khusus) Opsi pemantauan level pengisian: ya Opsi briket tipe string: ya (tergantung material) Opsi slider pengisi besar: ya, dengan aksesoris khusus slider pengisi besar Sesuai CE Persyaratan bahan baku: - Kadar air harus antara 6 hingga max. 15% - Panjang serpihan maksimal 20 mm - Suhu ruangan pemasangan minimal +5°C - Pengisian bahan harus bebas dari logam dan kontaminasi mineral seperti pasir, batu, dll. Kerusakan pada alat press dan/atau keausan yang meningkat bisa terjadi jika tidak memenuhi ketentuan ini.

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Semi-automatic depaneling / Base unit with parallel shuttle The dynamic depaneler LOW 4322 XL is specifically designed for medium to high product volumes and meets the increasing demands of modern production processes. Panels made of various PCB materials are separated using low-dust, low-stress sawing and milling techniques, ensuring maximum product flexibility, precision, and throughput. High-dynamic linear motor axes, tools, and grippers meet the highest quality standards and guarantee the depaneler’s long service life and reliability. Semi-automatic depaneling – tailor-made solutions The LOW 4322 XL depaneler enables rapid product changeovers while maintaining short separation and handling times. The PCB panel is loaded via a parallel shuttle, and clamped with a pin-clamping technique, optionally combined with vacuum suction cups as needed. Made in Germany Machine features: • Shaft and disc tool separation module on the Z-axis (automatic rotation 0-90 degrees) • X-Y cross-table module featuring linear motor technology with high-resolution measurement system • Dual loading module configured as a parallel shuttle, separate left and right sides with sliding doors • Steel welded frame with two maintenance doors – left and right; ESD-safe design • Standard vision system base module for teach-in programming • Working area: 520 x 480mm • Automatic milling cutter length detection • Remote maintenance/support via remote connection • Touch IPC with Windows 10 Pro operating system Dkjdpsvuw R Refx Ac Tjp • Laser axis measurement including log/report • Air ionization • Milling cutter breakage control (only for shaft milling tools) • Provisions for vacuum clamping technology • ESD powder coating, RAL 9002, for cover and sliding doors An optional dust extraction unit can be offered retrofitted upon request.

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 140 kg, panjang total: 900 mm, lebar total: 800 mm, tinggi total: 2.000 mm, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 30 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The universally applicable laser marking system LAS 28 XLe by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With its integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium, and plastics. Depending on the requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent markings, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and no advanced programming knowledge. Serial and article numbers can be incremented automatically by the software after initial configuration. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. A handheld scanner can also be used. The standard configuration includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance detection • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Signal lamp for operating status display • Max. part height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminium profile Dsdpfjxuvk Esx Ac Tokp • Air cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Power connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 45 kg, panjang total: 600 mm, lebar total: 400 mm, tinggi total: 690 mm, daya laser: 20 W, panjang gelombang laser: 1.064 nm, jenis pendinginan: udara, LASER - LAS 22 is a compact desktop unit with a small working area, making it ideal for small parts or, for example, nameplates. Due to its small footprint, the system is highly practical and can be used anywhere. Dksdpfx Acexqhnzo Tep The unit is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created quickly and easily with just a few clicks, without extensive programming skills. The software automatically increments serial and article numbers after prior setup. In addition, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. A standard feature includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 20 Watt fiber laser (Optional: 30 Watt) - Laser Class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (simple preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar total: 600 mm, panjang total: 1.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 150 kg, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, jangkauan kerja: 400 mm, tinggi produk (maks.): 30 mm, masa garansi: 12 bulan, model controller: SPS-Steuerung Siemens Simatic HMI, frekuensi input: 50 Hz, sambungan udara terkompresi: 6 batang, kapasitas beban per penyangga: 50 kg, akurasi pemposisian: 1 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, pencahayaan, penghadang cahaya keselamatan, Feeding and storage system for lightweight items in carrier trays. Tray feed for magazine loading in automated production processes. Specifically designed for surface- or contour-sensitive components. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4-8 seconds) • Maximum tray weight including workpieces: 5 kg • Maximum tray stacker weight: 50 kg • Positioning accuracy: ± 1 mm • PLC control system with operator and monitoring display • ESD configuration • Safety package: light curtain from Leuze for tray stacker • Prepared for AGV communication – Siemens IWLAN client • RFID read-write head • Increased autonomy time: 1 stack • Machine safety: active door interlock Dkedpfxjyycqxs Ac Tsp • Compact design with minimal space requirements • Flexible adaptation to various machines via multiple interfaces • Low investment costs • Fully equipped • Sturdy construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage: 400V / 50Hz / 3ph • Minimum compressed air connection: 6 bar • Dimensions: 1200 x 600 x 2300 mm (LxWxH)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, berat keseluruhan: 160 kg, panjang total: 1.300 mm, lebar total: 800 mm, tinggi total: 1.930 mm, tegangan masuk: 230 V, frekuensi input: 50 Hz, panjang gelombang laser: 10.600 nm, jenis arus masuk: AC (pendingin udara), jenis laser: Laser CO₂, Perlengkapan: pencahayaan, With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without extensive programming knowledge. Serial and article numbers are automatically incremented by the software, after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side-mounted arms for marking long components, are available. 60 Watt CO2 laser (optional: 30 W) • Wavelength: 10640 nm • Marking field size: 220x220 mm • Optional: Rotary axis (3-jaw chuck) • Optional: Fume extraction system (including activated carbon filter) Dksdpfx Acowkpyhj Top • Optional: Extensions for large workpieces (double-sided possible) • Marking software EZCAD (German / English) • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height: approx. 300 mm • Electrically adjustable Z-axis • Laptop with mounting bracket and Windows operating system • Frame made of aluminum profiles • Air-cooled • Door width: approx. 720 mm / door height: 400 mm • Power supply: 230 V • Dimensions: approx. 1000 x 800 x 2000 mm (L x W x H) • Weight: approx. 160 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.550 mm, tinggi total: 2.050 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, jarak gerak sumbu Z: 300 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.050 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser is indispensable for permanent marking. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software according to preset parameters. In addition, the software is capable of reading data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. Use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Further options, such as lateral extensions for marking long workpieces, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150 mm (larger options available) • Signal light to indicate operational status • Optional: Rotary axis (3-jaw chuck) • Optional: Fume extraction (incl. activated carbon filter) Dkjdpjxd Az Nsfx Ac Top • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Extensions for large workpieces (single- or double-sided) • Marking software EZCAD in German / English • Pilot laser (easy preview, plaintext preview) • Focus finder (simple focus adjustment) • Maximum workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg