Beli Mütek Systemtechnik Mpp Nem 900 bekas (5.165)

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal Iiedpfegfm Ryex Ahfof •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Ijded N Dnhepfx Ahfjif

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Ijdpegl Nlmefx Ahfjif Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series Iodpochqxxefx Ahfsif + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Ijdsffh Atepfx Ahfjif Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Ijdpfx Ahev Rpxlefjif Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates Iedpfx Ahod Su Hxjfoif + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Iiedpfx Ahjgmfa Aofef Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: Ijdpsdwktkjfx Ahfoif - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 1.064 mm, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 50 W, jenis pendinginan: udara, lebar total: 1.500 mm, tinggi total: 2.050 mm, panjang total: 900 mm, jangkauan kerja: 600 mm, berat keseluruhan: 120 kg, masa garansi: 12 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, panjang meja: 600 mm, lebar meja: 600 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.100 mm, panjang gelombang laser: 1.064 nm, tinggi kerja: 950 mm, frekuensi input: 50 Hz, Sistem pelabelan laser serbaguna LAS 28 XLe dari Systemtechnik Hölzer GmbH dapat digunakan untuk berbagai jenis pelabelan. Dengan laser serat terintegrasi, Anda dapat melabeli hampir semua jenis material, seperti baja, logam keras, aluminium, dan plastik. Tergantung pada kebutuhan, sistem ini dapat dilengkapi dengan laser serat 50 Watt. Untuk pelabelan permanen, penggunaan laser kini menjadi suatu keharusan di banyak industri. Dengan perangkat lunak laser yang canggih, teks, angka, kode 2D, kode QR, dan logo dapat dibuat hanya dengan beberapa klik, tanpa memerlukan pengetahuan pemrograman yang mendalam. Perangkat lunak ini secara otomatis menghitung nomor seri dan nomor artikel setelah pengaturan awal. Selain itu, perangkat lunak ini dapat membaca data (informasi variabel seperti nomor gambar, nama proyek, dll.) dari tabel yang ada dan secara otomatis mentransfernya ke area yang telah ditentukan. Penggunaan pemindai genggam juga dimungkinkan. Sebagai perlengkapan standar, terdapat PC terintegrasi dengan sistem operasi Windows dan perangkat lunak laser. Secara opsional, model laser LAS 28 XLe dapat dilengkapi dengan sumbu putar (rak 3 rahang) untuk pelabelan bagian silinder. Opsi lain, seperti lengan samping untuk pelabelan bagian panjang, sumbu Z yang dapat digerakkan, sistem laci, dll., juga dapat diimplementasikan. Dibuat di Jerman Laser serat 50 Watt • Kelas laser 1 • Panjang gelombang 1064nm • Ukuran area penandaan 150x150mm • Lampu sinyal untuk menampilkan status operasi • opsional: sumbu putar (rak 3 rahang) • opsional: sistem penyedot debu (termasuk filter karbon aktif) • Perangkat lunak penandaan EZCAD dalam bahasa Jerman / Inggris (perangkat lunak lain tersedia berdasarkan permintaan) • Laser panduan (pratinjau sederhana, pratinjau teks biasa) • Pencari fokus (pengaturan fokus sederhana) • tinggi komponen maksimum sekitar 300mm • Sumbu Z yang dapat diatur secara elektrik • PC terintegrasi dengan sistem operasi Windows • Layar sentuh IPS PCAP dan penopang keyboard, ketinggian dapat disesuaikan • Rangka dari profil aluminium • Didinginkan dengan udara • Lebar pintu sekitar 700mm / Tinggi pintu (bukaan): sekitar 400mm • Koneksi 230V Ijdpfx Ahoy Urpyofsif • Dimensi: sekitar 900 x 800 x 1900 mm (PxLxT) dengan dudukan layar sekitar 1500 x 800 x 1900 mm (PxLxT) • Berat: sekitar 120 Kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Weishaupt burner gas, dengan jalur gas Dungs DN 50 Tipe burner: WM-G10/3-A Iedpfx Aozdku Rjhfsif Model: ZM-LN Tahun produksi: 2011 Daya: 125–900 kW

Kondisi: baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, panjang sabuk konveyor: 3.000 mm, lebar sabuk konveyor: 400 mm, Perlengkapan: Pelat tipe tersedia, Konveyor sabuk dengan pengatur kecepatan, sistem RK Schmidt, tahun pembuatan 2022, ukuran Panjang x Lebar x Tinggi 3000x400x900 mm, rangka bawah dari aluminium dengan roda, tersedia 2 unit. Iijdpfx Aotr T Irehfjf

Tahun pembuatan: 2010, Kondisi: bekas, Pengendalian ketinggian cairan yang presisi untuk mendeteksi botol yang kurang atau terlalu penuh. Mesin (tambahan): Pengendalian ketinggian pengisian P maks: 10 bar Arus: 8 A Tegangan: 230 V Frekuensi: 50/60 Hz Panjang: 1,2 m Lebar: 0,93 m Tinggi: 2,2 m Perlengkapan: Pendeteksian ketinggian pengisian dan penutup, termasuk penyemprotan bagian mulut botol sebelum pengisian dan pembuangan dengan meja penampung. Berat: 350 kg Ijdpfoztzcdex Ahfoif

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.550 mm, tinggi total: 2.050 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, jarak gerak sumbu Z: 300 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.050 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser is indispensable for permanent marking. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software according to preset parameters. In addition, the software is capable of reading data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. Use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Further options, such as lateral extensions for marking long workpieces, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W Iedpfsxd Az Njx Ahfjif • Laser class 1 • Wavelength 1064nm • Marking field size 150x150 mm (larger options available) • Signal light to indicate operational status • Optional: Rotary axis (3-jaw chuck) • Optional: Fume extraction (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Extensions for large workpieces (single- or double-sided) • Marking software EZCAD in German / English • Pilot laser (easy preview, plaintext preview) • Focus finder (simple focus adjustment) • Maximum workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 1.064 mm, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.500 mm, tinggi total: 2.050 mm, panjang total: 900 mm, jangkauan kerja: 600 mm, berat keseluruhan: 120 kg, masa garansi: 12 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, panjang meja: 600 mm, lebar meja: 600 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.100 mm, panjang gelombang laser: 1.064 nm, tinggi kerja: 950 mm, frekuensi input: 50 Hz, The versatile LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Iiodey T Ixnspfx Ahfef Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become essential in many industries. The powerful laser software allows you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. A handheld scanner can also be used. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options such as side arms for marking long parts, movable Z-axis, drawer systems, etc., are also feasible. Made in Germany Fiber Laser 30 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm • Signal light for operational status display • Optional: rotary axis (3-jaw chuck) • Optional: extraction system (incl. activated carbon filter) • Marking software EZCAD in German/English (other software available on request) • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard stand • Frame made from aluminum profiles • Air-cooled • Door width approx. 700mm / Door pass-through height: approx. 400mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH)  with monitor bracket approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Kondisi: baik (bekas), Clean air extraction Iijdpfx Ahjrb D Njfof Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V

Tahun pembuatan: 2015, Kondisi: perlu perbaikan (bekas), Fungsionalitas: fungsi terbatas, panjang total: 13.000 mm, lebar total: 4.520 mm, tinggi total: 2.550 mm, nomor mesin/kendaraan: 201507-025, PEMOTONG JET AIR & STASIUN PENYATUAN: Unit ini merupakan bagian dari lini produksi yang lebih besar, silakan lihat juga iklan kami yang lain. Pada unit yang ditawarkan, lembaran mentah EPS/XPS (disuplai secara manual ke dalam magazin) direkatkan pada sisi depan menjadi pita kontinu, kemudian dilakukan pemotongan format dengan pemotong jet air termasuk pemotongan dan milling alur. Stasiun penekan & konveyor sabuk di akhir unit juga termasuk dalam penawaran ini. Iiodpfxjytp U Ao Ahfef DIMENSI BAHAN BAKU: Panjang: 1500 mm - 2500 mm Lebar: 600 mm - 1250 mm Tinggi: 20 mm - 50 mm PEMOTONG JET AIR: cut Expert variojet (produsen: expert international GmbH, sebelumnya expert systemtechnik GmbH) INCLUDES: Unit lem (Nordson), spindle milling (Jäger)

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), de_to_hu_it_lt_001 Iijdpfxjyu T Eno Ahfsf

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Sistem penandaan laser serbaguna LAS 28 XLe dari Systemtechnik Hölzer GmbH dapat digunakan untuk berbagai macam penandaan. Dengan laser serat terintegrasi, Anda dapat menandai hampir semua jenis material, seperti baja, logam keras, aluminium, dan plastik. Tergantung pada kebutuhan, sistem ini dapat dilengkapi dengan laser serat 20, 30, atau 50 watt. Untuk penandaan yang permanen, penggunaan laser kini menjadi suatu keharusan di banyak industri. Dengan perangkat lunak laser yang canggih, Anda dapat membuat teks, angka, kode 2D, kode QR, dan logo hanya dengan beberapa klik, tanpa memerlukan pengetahuan pemrograman yang mendalam. Perangkat lunak ini secara otomatis menghitung nomor seri dan nomor artikel setelah pengaturan awal. Selain itu, perangkat lunak ini dapat membaca data (informasi variabel seperti nomor gambar, nama proyek, dll.) dari tabel yang ada dan secara otomatis mentransfernya ke area yang telah ditentukan. Penggunaan pemindai genggam juga dimungkinkan. Perlengkapan standar mencakup PC terintegrasi dengan sistem operasi Windows dan perangkat lunak laser. Secara opsional, model laser LAS 28 XLe dapat dilengkapi dengan sumbu putar (chuck 3 rahang) untuk menandai bagian silinder. Pilihan lain, seperti misalnya lengan samping untuk menandai bagian panjang, sumbu Z yang dapat digerakkan, sistem laci, dll., juga dapat diimplementasikan. Dibuat di Jerman Laser serat 30W, 20W atau 50 Watt Iedpfx Asznr Sxjhfeif • Kelas Laser 1 • Panjang gelombang 1064nm • Ukuran area penandaan 150x150mm (opsional lebih besar) • Perangkat lunak penandaan EZCAD dalam bahasa Jerman / Inggris • opsional: sumbu putar (chuck 3 rahang) • opsional: sistem pengukuran ketinggian digital • opsional: sistem fokus otomatis - sistem untuk menentukan jarak fokus secara otomatis • opsional: sistem penyedot (termasuk filter karbon aktif) • Laser panduan (pratinjau sederhana, pratinjau kontur) • Pencari fokus (pengaturan fokus sederhana) • Lampu sinyal untuk menampilkan status operasi • tinggi komponen maks. sekitar 300mm • Sumbu Z yang dapat disesuaikan secara elektrik • PC terintegrasi dengan sistem operasi Windows • Dudukan layar dan keyboard dapat disesuaikan ketinggiannya • Rangka dari profil aluminium • Didinginkan dengan udara • Ruang internal ekstra besar • Lebar pintu sekitar 700mm / Tinggi pintu (bukaan): 400mm • Koneksi 230V • Dimensi: sekitar 900 x 800 x 1900 mm (PxLxT) • Berat: sekitar 120 Kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.550 mm, tinggi total: 2.050 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.100 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, Sistem pelabelan laser serbaguna LAS 28 XLe dari Systemtechnik Hölzer GmbH dapat digunakan untuk berbagai jenis pelabelan. Dengan laser serat terintegrasi, Anda dapat melabel hampir semua material, seperti baja, logam keras, aluminium, dan plastik. Bergantung pada kebutuhan, sistem ini dapat dilengkapi dengan laser serat 20, 30, atau 50 Watt. Untuk pelabelan permanen, penggunaan laser kini menjadi hal yang tak terhindarkan di banyak industri. Dengan perangkat lunak laser yang canggih, Anda dapat membuat teks, angka, kode 2D, kode QR, dan logo dengan mudah hanya dengan beberapa klik, tanpa memerlukan pengetahuan pemrograman yang mendalam. Perangkat lunak ini secara otomatis menghitung nomor seri dan nomor artikel setelah pengaturan awal. Selain itu, perangkat lunak ini dapat membaca data (informasi variabel seperti nomor gambar, nama proyek, dll.) dari tabel yang ada dan secara otomatis mentransfernya ke area yang telah ditentukan. Penggunaan pemindai genggam juga dimungkinkan. Sebagai perlengkapan standar, sistem ini dilengkapi dengan PC terintegrasi dengan sistem operasi Windows dan perangkat lunak laser. Secara opsional, model laser LAS 28 XLe dapat dilengkapi dengan sumbu putar (chuck 3 rahang) untuk pelabelan komponen silinder. Opsi lain, seperti lengan samping untuk pelabelan komponen panjang, sumbu Z yang dapat digerakkan, sistem laci, dll., juga dapat diimplementasikan. Dibuat di Jerman Laser serat 30 Watt (opsional 20 Watt atau 50 Watt) • Kelas laser 1 • Panjang gelombang 1064nm • Ukuran area penanda 150x150mm (opsional lebih besar) • Lampu sinyal untuk indikasi status operasi • opsional: sumbu putar (chuck 3 rahang) • opsional: sistem penyedot debu (termasuk filter arang aktif) • opsional: sistem pengukuran ketinggian digital • opsional: sistem fokus otomatis untuk penentuan jarak fokus otomatis • Perangkat lunak penanda EZCAD dalam bahasa Jerman / Inggris (perangkat lunak lain tersedia berdasarkan permintaan) Isdpfxowlc Sts Ahfeif • Laser pilot (pratinjau sederhana, pratinjau teks yang jelas) • Pencari fokus (pengaturan fokus sederhana) • Tinggi komponen maksimum sekitar 300mm • Sumbu Z yang dapat disesuaikan secara elektrik • PC terintegrasi dengan sistem operasi Windows • Layar sentuh IPS PCAP dan penyangga keyboard, tinggi dapat disesuaikan • Rangka dari profil aluminium • Didinginkan dengan udara • Ruang interior yang sangat besar • Lebar pintu sekitar 700mm / Tinggi pintu (bukaan): sekitar 400mm • Koneksi 230V • Dimensi: sekitar 900 x 800 x 1900 mm (P x L x T) dengan dudukan layar sekitar 1500 x 800 x 1900mm (P x L x T) • Berat: sekitar 120 Kg

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Iisdpfx Aechuvrshfsf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, jam operasional: 6 h, Masih ada satu mesin yang tersedia segera! Mesin sangat kokoh dengan daya tekan tinggi—juga cocok untuk menghasilkan kualitas briket yang bisa dijual* tergantung pada jenis material. Silinder tekan berukuran besar dan diameter briket 80 mm memungkinkan hal ini. Seri mesin briket terlaris kami + Teknologi sederhana dan teruji, sangat minim risiko kerusakan + 25 tahun pengalaman, pengembangan berkelanjutan, dan keahlian + Ribuan mesin beroperasi dengan pelanggan yang puas Iisdpfx Aoxfwdshfjf + Rasio harga-kinerja terbaik Biaya tambahan untuk perangkat pendingin: €4.995 net (bisa ditambahkan kemudian) * Mendinginkan tang penjepit dan oli hidrolik (direkomendasikan jika mesin beroperasi lebih dari ±3,5 jam tanpa jeda) Diameter briket: 80 mm Bushing depan: 125 mm Langkah briket max.: 100 mm Langkah briket optimal: 80 mm Kapasitas (tergantung material): hingga 200 kg/jam max.* *tergantung berat jenis *berdasarkan berat jenis 200 kg per meter kubik Daya motor: 9,2 kW 400 Volt / 50 Hz / 3-Phase Panjang: 2095 mm Lebar: 1600 mm Tinggi: 1700 mm Berat: 1250 kg Kapasitas oli: 220 liter Diameter silo: 1200 mm Volume silo: ±1 m³ Pompa: 75 liter Pre-compactor hidrolik Opsi pendinginan tang penjepit: ya, dengan aksesoris khusus Tang Penjepit Berpendingin Opsi pendinginan oli hidrolik: ya Pendinginan tang penjepit dan oli hidrolik dengan perangkat pendingin (aksesoris khusus) Opsi pemantauan level pengisian: ya Opsi briket tipe string: ya (tergantung material) Opsi slider pengisi besar: ya, dengan aksesoris khusus slider pengisi besar Sesuai CE Persyaratan bahan baku: - Kadar air harus antara 6 hingga max. 15% - Panjang serpihan maksimal 20 mm - Suhu ruangan pemasangan minimal +5°C - Pengisian bahan harus bebas dari logam dan kontaminasi mineral seperti pasir, batu, dll. Kerusakan pada alat press dan/atau keausan yang meningkat bisa terjadi jika tidak memenuhi ketentuan ini.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 800 mm, tinggi total: 2.000 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, masa garansi: 12 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 340 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, arus masuk: 16 A, lebar yang dibutuhkan: 800 mm, panjang gelombang laser: 1.064 nm, tinggi kerja: 900 mm, persyaratan ruang panjang: 900 mm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, Perlengkapan: ekstraksi asap, The universally applicable laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser for permanent marking has become indispensable. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial setup. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with mount running Windows operating system and laser software. Optionally, the LAS 28 XL laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., can be implemented. Iiedpfeywg Sbox Ahfjf Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150 x 150 mm (optionally larger) • Marking software EZCAD in German / English • Signal tower to indicate operational status • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: fume extraction (incl. activated carbon filter) • Optional: extension arms for large parts (single- or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 300 mm • Electrically adjustable Z axis • Laptop including mount with Windows operating system • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (L x W x H) • Weight: approx. 120 kg

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent markings, the use of a laser has now become indispensable across numerous industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—and without extensive programming knowledge. Serial and article numbers are automatically incremented after initial setup. In addition, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side arms for the marking of long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German / English Iedpfx Aoxd A I Ashfsif • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (including activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal lamp for status indication • Max. part height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard shelf • Aluminum profile frame • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Tahun pembuatan: 2020, jam operasional: 100 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 300 kg, panjang total: 1.330 mm, lebar total: 840 mm, tinggi total: 1.870 mm, sambungan udara terkompresi: 6 batang, jenis arus masuk: AC (pendingin udara), TL-6040 Iijdpfxoxuqtbj Ahfef