Beli Mep Shark 512 Sxi Evo bekas (1.037)

Kondisi: baru, Cutting diameter: 330 mm Cutting range at 90 degrees, flat: 510 x 320 mm Dkjdefg E Ibjpfx Afweu Cutting range at 90 degrees, square: 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position. Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min. Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller Dsdpfxsfg E H Ss Afweku for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: hampir baru (bekas), Mesin gergaji pita elektro-hidraulik semi-otomatis Dimensi mata gergaji: 2950x27x0,9 mm Mesin gergaji ini cocok untuk memotong logam padat dan profil logam dengan penampang sedang hingga 280x200 mm pada sudut 0°; Rentang pemotongan pada sudut: dari 0° hingga 60° ke kiri; DILENGKAPI DENGAN AKSESORI TAMBAHAN - siklus pemotongan manual dan dinamis manual Tahun pembuatan: 2025 Dkjdpfxezlimbo Afweu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 200421-16/0, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.500 kg, panjang mata gergaji pita: 4.640 mm, lebar pita gergaji: 34 mm, RINCIAN TEKNIS Jenis gergaji: Semi-otomatis Orientasi: Horizontal Kemampuan memotong sudut: Ya Kapasitas pemotongan bulat: 360 mm Panjang mata gergaji: 4.640 mm Lebar mata gergaji: 34 mm Ketebalan mata gergaji: 1,1 mm RINCIAN MESIN Pengendalian: Sistem “teach-in” Penjepitan benda kerja: Hidraulik Daya: 3,5 kW Berat pengiriman: 1.500 kg Paket pengiriman: 1 unit PERLENGKAPAN Dkedpfx Aezrmniofwou Tanda CE

Kondisi: baru, Bandsaw blade dimensions: 4640x34x1.1 mm 2 speeds: 15-100 m/min Vice opening: 515 mm Cutting capacity at 90 degrees: square 320 mm Cutting capacity at 90 degrees: round 330 mm Cutting capacity at 90 degrees: flat 510x320 mm Cutting capacity at 45 degrees left: round 320 mm Cutting capacity at 45 degrees left: square 320 mm Cutting capacity at 45 degrees left: flat 350x320 mm Cutting capacity at 60 degrees left: round 230 mm Cutting capacity at 60 degrees left: square 230 mm Cutting capacity at 60 degrees left: flat 230x310 mm Cutting capacity at 45 degrees right: round 320 mm Cutting capacity at 45 degrees right: square 320 mm Cutting capacity at 45 degrees right: flat 380x320 mm Cutting capacity at 60 degrees right: round 250 mm Cutting capacity at 60 degrees right: square 250 mm Cutting capacity at 60 degrees right: flat 250x320 mm Total power requirement: 4 kW Djdpfx Afoyv Nkkowsku Weight: 1190 kg Machine dimensions: 2000x1200x1800 mm Electrohydraulic, semi-automatic bandsaw with MEP 30 control system for mitre cuts from 0° to 60° left. The MEP 30 represents the latest generation of control systems. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for cutting - Motor stops - Saw head raises – vice opens Main features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with latest-generation micro-controller - Electrical system centralized in main control cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, bandsaw motor current draw, saw head position, bandsaw speed, band tension)

Kondisi: baru, Cutting diameter 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Dkodpsfg E H Uefx Afwju Blade speed range: 40 / 80 m/min Bandsaw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electro-hydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic, dynamic, manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel on a swiveling arm. - Low-voltage operating panel: Polyester membrane keypad with thermoformed raised buttons and operation control signal. - Display shows: * Diagnostics (messages in the user language) * Alerts (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for each cut * Bandsaw motor power consumption * Bandsaw tension * Bandsaw speed * Numerical display of the saw head position - Switch handle IP55 for manual 24V cycle. - Comprehensive program of all special cutting cycles. - Identification of other possible special cutting cycles for specific applications - New next-generation hydraulic control unit, highly efficient and low energy consumption. - Rotary table (mounted on 420 mm ball bearings with preloaded thrust bearing). - Dual blade speed (40/80 m/min.) with control - Prepared for the addition of an electronic inverter for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow feed programmable directly from the control panel for adaptation to material. - Vise unit laterally adjustable left and right, with quick-action vise. - Hand-operated blade tension control with electronic converter display on screen. - Machine base designed to completely collect coolant even at maximum mitre angles. - Coolant pan (with electric pump for blade lubrication and cooling) and chip tray (can be replaced by a chip conveyor – see optional accessories) are integrated in the machine base. - Prepared for installation of minimal blade lubrication kit (optional, in addition to the standard emulsion oil lubrication). - Chip-cleaning brush. - The machine is designed for pallet jack transport. - Adjustable length stop for repeated cuts of equal length - Material support arm with roller for attaching a loading platform - Bimetal saw blade for solid and profile material. - Tools and user manual in the respective user language.

Kondisi: baru, Cutting diameter: 330 mm Cutting capacity at 90 degrees, flat: 510 x 320 mm Cutting capacity at 90 degrees, square: 320 x 320 mm Cutting capacity at 45 degrees, flat: 350 x 320 mm Cutting capacity at 45 degrees, round: 320 mm Cutting capacity at 45 degrees, square: 300 x 300 mm Cutting capacity at 60 degrees, flat: 230 x 310 mm Cutting capacity at 60 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, round: 200 mm Speed range: 15 - 100 m/min Saw blade dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Specifications: - Sturdy electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre angle adjustment via large rotating table - MEP EVO microprocessor control for managing all functions * Located front right, rotatable - Optional manual or automatic descent of the saw bow * Infinitely adjustable saw frame descent - Carbide blade guides - Hydraulic blade tensioning with digital display - 2 blade speeds - 1x bi-metal bandsaw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets Dsdpjxaa Tzjfx Afwsku - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic vice clamping - Electro-hydraulic saw frame lowering - Electro-hydraulic saw frame lifting - Electro-hydraulic vice opening

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 25.4 x 0.9 mm Machine weight approx. 0.4 t Dkodjfg E H Ropfx Afwju Dimensions LxWxH 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a swivel arm - High-performance, latest-generation hydraulic control unit with low energy consumption - Base frame with pull-out coolant tank The machine fully complies with all CE regulations!

Kondisi: baru, Cutting diameter 280 mm Cutting range at 90 degrees: flat 380 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Dodpefg E Iaefx Afwoku Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic functions, for cuts from 45° right to 60° left. Key features: - Swivelling control panel on vertical post - 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts - Dual band speed (40/80 m/min.)

Kondisi: baru, Model designation Shark 332-1 SXI evo Dsdpfxjgvkafo Afweku

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Kapasitas pemotongan 90° (lingkaran): ø250 mm Kapasitas pemotongan 90° (persegi panjang): 280 x 220 mm Kapasitas pemotongan +45° (lingkaran): ø230 mm Kapasitas pemotongan +45° (persegi panjang): 220 x 200 mm Kapasitas pemotongan -45° (lingkaran): ø200 mm Kapasitas pemotongan -45° (persegi panjang): 200 x 140 mm Kapasitas pemotongan +60° (lingkaran): ø120 mm Djdpfxozi Ackj Afwjku Kapasitas pemotongan +60° (persegi panjang): 140 x 80 mm Rentang sudut miter: -45° hingga +60° Pita gergaji: 2950 x 27 x 0,9 mm Kecepatan pita: 36/72 m/menit Tinggi kerja: 285 mm Tipe: Gergaji pita semi-otomatis, Penjepit hidraulik Negara asal: Italia Daya motor: 1,5/1,8 kW Dimensi mesin (P×L×T): 165 x 115 x 180 cm Berat mesin: 475 kg

Kondisi: baru, Rentang pemotongan pada 90 derajat: bundar 300 mm Rentang pemotongan pada 90 derajat: persegi 250 mm Rentang pemotongan pada 90 derajat: datar 380x250 mm Rentang pemotongan pada 45 derajat kiri: bundar 260 mm Rentang pemotongan pada 45 derajat kiri: persegi 250 mm Rentang pemotongan pada 45 derajat kiri: datar 300x200 mm Rentang pemotongan pada 60 derajat kiri: bundar 180 mm Rentang pemotongan pada 60 derajat kiri: persegi 170 mm Rentang pemotongan pada 60 derajat kiri: datar 200x170 mm Rentang pemotongan pada 45 derajat kanan: bundar 240 mm Rentang pemotongan pada 45 derajat kanan: persegi 210 mm Rentang pemotongan pada 45 derajat kanan: datar 280x160 mm Ukuran pita gergaji 3770x27x0,9 mm Kecepatan 40/80 m/menit Pembukaan ragum 385 mm Daya total 1,5/1,8 kW Berat 695 kg Bandsaw elektro-hidrolik semiotomatis dengan fungsi dinamis semiotomatis manual. Dilengkapi dengan kontrol MEP-30 untuk pemotongan mitra dari 45° kanan hingga 60° kiri. MEP 30 merupakan generasi terbaru dari sistem kontrol. Fungsi semiotomatis: - Ragum menutup dan motor mulai beroperasi - Kepala gergaji menurun untuk pemotongan - Motor berhenti - Kepala gergaji naik kembali - Ragum terbuka Sistem dinamik semiotomatis: - Penurunan busur gergaji secara manual ke posisi yang diinginkan - Siklus mulai menggunakan sakelar tangan - Posisi atas disimpan secara otomatis Dksdpfxjyv Ntrs Afwsu Fitur utama: - Unit hidrolik dengan elektrovalve efisiensi tinggi dan pompa hidrolik tekanan tinggi (200 bar) - Kontrol elektronik mesin dengan mikrokontroler generasi baru - Instalasi listrik terpusat di kabinet kontrol utama - Tampilan alarm, diagnosis, dan fungsi mesin (waktu potong, jumlah potongan, konsumsi arus motor pita gergaji, posisi kepala gergaji, kecepatan pita gergaji, tegangan pita) - Fungsi manual-semiotomatis/dinamis sebagai standar Beberapa karakteristik: - Panel kontrol tegangan rendah: keypad membran poliester dengan tombol menonjol bertermovakum dan sinyal kontrol konfirmasi - Tuas saklar IP55 untuk siklus 24V manual - Program lengkap untuk semua siklus pemotongan khusus - Unit kontrol hidraulik terbaru dengan konsumsi energi rendah & mode siaga - Meja putar pada bantalan rol 420 mm, dengan bantalan tekanan pramuat, serta meja kerja baja yang dapat diganti - Gerakan naik turun busur gergaji dapat diprogram langsung dari panel kontrol, menyesuaikan dengan bahan potong - Perangkat penjepit dapat digeser ke kiri dan kanan, dilengkapi ragum penjepit cepat - Kontrol ketegangan pita yang dioperasikan manual dengan tampilan di layar melalui konverter elektronik

Kondisi: baru, de-hu-it-lt-001 Dedpeyv Nfuefx Afwjku

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 400 kg, MESIN PEMOTONG SEMI-OTOMATIS DENGAN PENJEPIT PNEUMATIK, MEP SHARK 280 Djdpfx Afsz H Ixpewjku

Kondisi: baru, 2 speeds: 36/72 m/min Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330x260 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170x170 mm Cutting capacity at 45°: round 260/200 mm Cutting capacity at 45°: square 250/180 mm Cutting capacity at 45°: flat 270x200/200x160 mm Saw blade dimensions: 3650x27x0.9 mm Total power requirement: 1.5/1.8 kW Machine dimensions: 2130x1400x1950 mm Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic-dynamic and manual function. Equipped with MEP-30 control for mitre cuts from 45° right to 60° left. The MEP 30 represents the latest generation of controls. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head raises - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via manual push button - Upper position is saved automatically Main features: - Hydraulic unit with solenoid valve, highly efficient and high-pressure hydraulic pump (200 bar) - Electronic machine control with new-generation microcontroller - Centralized electrical system in the main switch cabinet - Display for alarms, diagnostics, and machine functions (cutting time, number of cut pieces, amp draw of saw blade motor, saw head position, saw blade speed, blade tension) - Manual-semi-automatic/dynamic function as standard Dkedpfxeyv Nmlj Afwju Additional features: - Low-voltage control panel: Polyester membrane keypad with thermoformed, raised keys and confirmation signal - Manual 24 V cycle switch handle, IP55 - Complete program of all special cutting cycles - New hydraulic control unit with low energy consumption; stand-by operation - Rotary table on roller bearing, 420 mm, with preloaded thrust bearing, equipped with interchangeable steel worktable - Saw bow stroke programmable directly from control panel to adapt to material size - Clamping device laterally adjustable to left and right, with quick-acting vice - Manual blade tension control with display on screen via electronic converter

Kondisi: baru, Model designation Dsdpfjgvkctsx Afwjku Shark 282 SXI evo

Kondisi: baru, Model designation Dkodpfx Aegvkglsfwsu Shark 281 SXI evo

Kondisi: baru, 001 Dksdpfoyv Narsx Afwou

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Dksdpfx Afsxaa S Rewou Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vise opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for full function management * Front right, rotatable - Choice of manual or automatic bow descent * Infinitely variable adjustment of bow lowering speed - Carbide blade guides - Hydraulic blade tensioning with digital value display - 2 x blade speeds - 1 x bi-metal saw blade - 1 x angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Semi-automatic operation: - Electro-hydraulic vise clamping - Electro-hydraulic bow descent - Electro-hydraulic bow lift - Electro-hydraulic vise opening SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Band speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Features: Dodpjxaagbefx Afwoku - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * positioned at the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of saw bow descent - Carbide saw blade guides - Hydraulic saw blade tensioning – incl. digital value display - 2x band speeds - 1x bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Diameter pemotongan: 300 mm Rentang pemotongan pada 90 derajat: bentuk pipih 380 x 250 mm Rentang pemotongan pada 90 derajat: bentuk persegi 250 x 250 mm Rentang pemotongan pada 45 derajat: bentuk pipih 300 x 200 mm Rentang pemotongan pada 45 derajat: bentuk lingkaran 260 mm Rentang pemotongan pada 45 derajat: bentuk persegi 250 x 250 mm Rentang pemotongan pada 60 derajat: bentuk pipih 200 x 170 mm Rentang pemotongan pada 60 derajat: bentuk persegi 170 x 170 mm Rentang pemotongan pada 60 derajat: bentuk lingkaran 180 mm Rentang kecepatan: 40 / 80 m/menit Dimensi pita gergaji: 3770 x 27 x 0,9 mm Daya motor: 1,5 / 1,8 kW Berat: 695 kg Kebutuhan ruang: sekitar 1950 x 1300 x 200 mm Perlengkapan: - Mesin gergaji pita semi-otomatis elektro-hidraulik yang kokoh (INDUSTRI) - Dengan pemotongan miring dari 45° ke kanan hingga 60° ke kiri * Pengaturan miring melalui piring putar besar - Kontrol mikroprosesor MEP EVO untuk mengontrol semua fungsi * Dapat diputar, terletak di depan kanan - Penurunan busur gergaji secara manual atau otomatis, dapat dipilih * Pengaturan bertahap penurunan busur gergaji - Panduan pita gergaji terbuat dari pelat logam keras - Ketegangan pita gergaji hidraulik - termasuk tampilan nilai digital - 2 kecepatan pita gergaji - 1 pita gergaji BI-Metal - Sistem pendingin - 1 penghenti sudut - Sikat pembersih serpihan - Rangka mesin dengan tempat untuk forklift - Instruksi pengoperasian dalam bahasa Jerman Cara kerja pengoperasian semi-otomatis: - Penjepitan vise secara elektro-hidraulik - Penurunan busur gergaji secara elektro-hidraulik - Pengangkatan busur gergaji secara elektro-hidraulik Dkjdjxaax Depfx Afweu - Pembukaan vise secara elektro-hidraulik

Kondisi: baru, Diameter pemotongan: 300 mm Area pemotongan pada 90 derajat: bentuk datar 330 x 260 mm Area pemotongan pada 90 derajat: bentuk persegi 260 x 260 mm Area pemotongan pada 45 derajat: bentuk datar 270 x 200 mm Area pemotongan pada 45 derajat: bentuk bulat 260 mm Area pemotongan pada 45 derajat: bentuk persegi 250 x 250 mm Area pemotongan pada 60 derajat: bentuk datar 170 x 170 mm Area pemotongan pada 60 derajat: bentuk persegi 170 x 170 mm Area pemotongan pada 60 derajat: bentuk bulat 180 mm Rentang kecepatan: 40 / 80 m/menit Dimensi pita gergaji: 3650 x 27 x 0,9 mm Pengendali: MEP Daya motor: 1,5 / 1,8 kW Berat: 670 kg Fitur: - Mesin gergaji pita semi-otomatis elektro-hidraulik yang kokoh (INDUSTRI) Dkodpfx Afjxaav Aewsu - Dengan pemotongan miring dari 45° ke kanan hingga 60° ke kiri * Pengaturan sudut miring melalui piring putar besar - Pengendali mikroprosesor MEP EVO untuk mengontrol semua fungsi * Dapat diputar, terletak di bagian depan kanan - Penurunan busur gergaji secara manual atau otomatis * Pengaturan tanpa langkah penurunan busur gergaji - Panduan pita gergaji dari pelat karbida - Ketegangan pita gergaji hidraulik - termasuk tampilan nilai digital - 2 kecepatan pita gergaji - 1 pita gergaji BI-Metal - Sistem pendingin - 1 penghenti sudut - Sikat pembersih serpihan - Rangka mesin dengan kantung untuk forklift - Instruksi pengoperasian dalam bahasa Jerman Cara kerja pengoperasian semi-otomatis: - Penjepit elektro-hidraulik dari penjepit - Penurunan elektro-hidraulik dari busur gergaji - Pengangkatan elektro-hidraulik dari busur gergaji - Pembukaan elektro-hidraulik dari penjepit

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Dkjdexaatbopfx Afwju Vice width: 285 mm Cutting speed range: 36/72 m/min Saw band dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - With mitre cuts from 45° to the right up to 60° to the left * Mitre adjustment via a large rotary table - MEP microprocessor control EVO for managing all functions * Swivel-mounted, located front right - Choice of manual or automatic lowering of the saw frame * Infinitely variable adjustment of the saw frame descent - Saw band guide made from hard metal plates - Hydraulic saw blade tensioning - incl. digital value display - 2x saw band speeds - 1x bi-metal saw band - Coolant device - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Operation in semi-automatic mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 200 mm Cutting range at 90 degrees: square 230 x 230 mm Cutting range at 45 degrees: round 190 mm Cutting range at 45 degrees: flat 180 x 180 mm Cutting range at 45 degrees: square 180 x 180 mm Cutting range at 60 degrees: round 120 mm Cutting range at 60 degrees: square 110 x 110 mm Cutting range at 60 degrees: flat 110 x 110 mm Vice: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank capacity: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 435 kg Space requirements: approx. 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Miter cuts up to 60° - MEP microprocessor control EVO for monitoring all functions * positioned front right, rotatable - Optional manual or automatic lowering of the saw bow * infinitely variable adjustment of the saw bow descent - Saw blade guide made from carbide inserts - Hydraulic saw blade tensioning with digital value display - 2x blade speeds - 1x bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice Dkjdpfew U U Uwox Afwju

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Mesin gergaji pita MEP Shark 282 NC evo. Gergaji yang kokoh ini ideal untuk pemotongan presisi pada berbagai jenis material. MEP Shark 282 NC evo Produsen: Mep Tipe: Shark 282 NC evo Tahun pembuatan: 2008 Kondisi: bekas Informasi lebih lanjut tersedia berdasarkan permintaan. Dkedpfx Afjzmikvjwju