Beli Otomatis Mesin Gergaji Aluminium Pressta Eisele Profilma 500 bekas (85.920)

Tahun pembuatan: 2011, Kondisi: bekas, Max. diameter mata gergaji: 500 mm Kapasitas potong hingga 80 x 200 mm Panjang mekanisme umpan: maks. 800 mm, dengan tampilan digital Kecepatan putaran mata gergaji: 2 putaran per menit Penghitung jumlah produksi dengan fungsi mati otomatis saat nilai target tercapai Umpan material pneumatik yang dapat disesuaikan tanpa tingkat Umpan gergaji hidropneumatik Penjepit material pneumatik Spray system Iijdpsxl Dz Tefx Afioa Hanya 4400 jam kerja Termasuk buku petunjuk operasi Dimensi mesin: 2100 x 1100 x 1500 mm (P x L x T)

Tahun pembuatan: 2004, Kondisi: bekas, de982b7c Iiedpfx Aoxn Iq Defioa

Tahun pembuatan: 2006, Kondisi: bekas, Max. diameter mata gergaji: 500 mm Kisaran pemotongan hingga 80 x 200 mm Panjang pemajuan: maks. 800 mm dengan tampilan digital Kecepatan putar mata gergaji: 2 putaran per menit Penghitung potongan dengan pematian otomatis saat jumlah target tercapai Iisdpfsvcmirsx Afioa Pemajuan material pneumatik yang dapat disetel tanpa tingkat Pemajuan gergaji hidropneumatik Penjepit material pneumatik Perangkat penyemprot Hanya 2.200 jam operasi Termasuk petunjuk pengoperasian Dimensi mesin: 2100 x 1100 x 1500 mm (PxLxT)

Tahun pembuatan: 1998, Kondisi: bekas, Long-cut saw for cutting aluminium profiles with feed pusher, in very good condition. Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Maximum feed pusher stroke: 6,200 mm The machine is currently dismantled and stored in our warehouse. Iijdpfxowx I Hvo Afija Further technical data available on request.

Tahun pembuatan: 2009, Kondisi: bekas, Aluminium cutting system with 2 saw motors, each capable of performing independent 45° cuts. Material feed unit accommodating up to 8,100 mm. Cross conveyor, discharge table, chip conveyor, and extraction unit included. Soundproof enclosure. Control via Siemens S7 panel. Operating manual and additional documentation available; further technical details on request. The machine was operational up to the point of dismantling. Iisdpfx Afjqzmnueioa Further technical specifications available on request or see photos.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.809 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1559, diameter mata gergaji: 550 mm, panjang pemakanan sumbu X: 800 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, Rentang pemotongan baja bulat pada 90°: 190 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.850 rpm, ketinggian potong (maks.): 150 mm, berat keseluruhan: 1.650 kg, panjang bagian (min.): 3 mm, panjang bagian (maks.): 4.000 mm, kecepatan mata gergaji: 2.850 rpm, tegangan masuk: 400 V, penggerak gergaji: 7.500 W, diameter pemotongan: 270 mm, lubang pisau gergaji: 40 mm, CNC Circular Sawing Machine PROFILMA 502 + Chip Extraction Unit MG 3 CNC Circular Sawing Machine PROFILMA 502 1 69,430.00 69,430.00 Fully automatic operation, drive motor 7.5 kW, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Max. profile width 270 mm, Siemens S7 control system with touch display including piece counter Includes CPU 315 and a Flexisoft, piece count multiplier for processing material bundles Cycle time specification in seconds, chain dimensions, including reversing device for section lengths up to max. 4 m Iisdpfjy Dtpmsx Afija Automatic shut-off via limit switch at material end, error diagnostics, including IXON router for VPN connection (see data sheet) Motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping device acting from below upwards, on both infeed and outfeed sides relative to the saw head, cut slot extension on both sides of the saw blade, electronic material feed unit with 800 mm feed stroke, ball screw and servo motor, including pneumatic horizontal and vertical clamping device, The profile support area at the feed point is equipped with a height-adjustable roller, minimum cut-off length from 75 mm (profile dependent), clamping pressure reduction horizontally and vertically with 6 pressure regulators, timed spray device with fill-level monitoring and automatic shut-off, 1-liter lubricant reservoir, sound insulation package, frame interior lined with damping mats 2 extraction nozzles Ø 100 mm, safety guard over saw head and feed unit, 740 mm roller conveyor with reach guard on infeed side, 450 mm Pertinax tabletop with reach guard on outfeed side Chip Extraction Unit MG 3 Dust and chips collected in a 172-liter metal container, easily emptied thanks to swing-out design 2 outlets with hose adapters 100 mm (no extraction hose included), drive 3.0 kW, 400 V, 50 Hz, three-phase motor Max. airflow rate: 2,600 m³/h, negative pressure 30 mbar, with scroll housing over the extractor fan Large filter area, pneumatic shaking unit for filter cleaning, filter class M, noise level max. 80 dB(A) Selector switch for continuous operation or saw-controlled mode, supplied without power cable, paint finish: RAL 7035 / 9016

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1587 / 1588, diameter mata gergaji: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw Unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Iijdpsyyz Txofx Afiea Punching Unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. Punching is performed vertically from above, with punch tool cassettes accommodating up to 8 profiles simultaneously. Material Feed: The material is fed via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per stroke. Control System: Modern versions are often equipped with a Siemens S7 control unit featuring a touch display for intuitive operation and precise programming. The machine is built for continuous industrial use and offers the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on equipment). Dimensions (Saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also customized financing options tailored to your needs. Whether down payment, installment plan, or individual financing models – together we will find the right solution. Upon request, we will also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and on-schedule process so you don’t have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding offer. We will advise you personally and professionally. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1589 / 1590, diameter mata gergaji: 500 mm, Fully automated sawing and punching machine for aluminum and plastic profiles The Profilma 502 ST-V combines precision sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex operations, and processing bundled materials. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Up-cut saw motion, motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round shaft guidance - Minimum offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punching unit (discharge side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2–3 seconds - Punch scrap ejection into frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, volt-free contact for extraction control Ijdpoyyz Ebofx Afisia - Minimum quantity lubrication unit with 2 × 3-liter tanks and fill level indicator - Soundproofing package: hood and saw blade guard insulated inside - Roller conveyor (740 mm) with reach-in guard on feed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety cover - Saw blade housing below tabletop Max. cutting capacity: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailored financing options designed to suit your needs. Whether down payment, installments, or individual financing models—we will find the right solution together. On request, we also handle complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process, so you do not need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1591 / 1592, diameter mata gergaji: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic pass-through process. Based on the Profilma 502 model, it is specially optimized for high-volume applications and combined operations—including the processing of entire profile bundles. Iiedpfx Afsyyzxhjisa Control is via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnostics. An IXON router allows secure remote access via VPN. Up to 10 punching positions can be programmed per job. The horizontal punching unit can be deactivated as required. Saw range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Continuously variable speed adjustment - Saw cut from below, motorized feed - Material feed: 3–800 mm, reversing up to 4,000 mm - Ball screw with servo drive and round shaft guide - Offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical and horizontal hydraulic punching unit (output side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke continuously adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punching scrap is discharged laterally from the machine frame - Conveyor belt 250 × 800 mm for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free connection for extraction control - Minimum quantity lubrication system with two 3-liter tanks and fill-level display - Noise protection package: hood and internal blade guard sound-insulated - Roller conveyor (740 mm) with reach-in protection on feed side - Robust stationary frame, working height: 960 mm - Manually opening protective hood - Saw blade housing under the table Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available. ---- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailored financing solutions to suit your needs. Whether it's a down payment, installment plan, or custom financing models—together we'll find the right solution. On request, we can also take care of the entire transport organization. From planning to reliable delivery, we ensure smooth and timely handling so you don’t need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We will be happy to provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Metall circular saw from 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approx. 12 kW output. It offers automatic material feed and a pneumatic clamping system for efficient operation. If you are looking for a high-quality saw, you should consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details about this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles • Saw blade diameter: Ø400 mm Iodpjyyxxfjfx Afisia • Motor power: approx. 12 kW • Saw blade speed: adjustable, approx. 3,500-5,800 rpm • Saw movement drive: Servo motor with ball screw spindle drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Cross-cut • Material feed: Automatic servo feed with repetition strokes for larger cutting lengths • Material separation: Before the saw blade retracts (no trimming cut) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force adjustable separately; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status display • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubricant control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction Additional equipment • External chip extraction (to connect to Ø100/Ø160 mm ports)

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Gergaji Ausklink untuk pemotongan sudut dan pemotongan miring. Iisdpfsyzcpdjx Afiea Mesin ini memiliki 2 diameter mata gergaji masing-masing 500 mm. Dilengkapi dengan alat penjepit pneumatik. Gerakan maju bersifat hidropneumatik dan dioperasikan dengan kendali dua tangan. Pemberhenti material dapat diputar dengan titik pengunci serta dilengkapi tampilan digital. Tinggi dan sudut potongan dapat disetel secara motorik dan dilengkapi tampilan digital. Maks. tinggi profil: 280 mm Maks. lebar potongan: 300 mm Maks. tinggi potongan: 185 mm Maks. kedalaman potongan: 185 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, vollautomatische-bedienung-saegemaschine Iisdoyvtyvjpfx Afija

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, diameter mata gergaji: 550.500 mm, The machine is in perfect technical condition and has seen very little use. Designed for machining aluminium and PVC profiles. Mitre cuts possible on 3 levels; can be used as a notching saw. Manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, triple-sided mitre. Profile processing up to 300 mm, width up to 90°; mitre cuts up to 30°. Horizontal notching depth up to 185 mm, vertical up to 210 mm at 90°. Cutting width at 90°: 300 mm; maximum profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical saw blade swivel range: 30° – 90° – 30° (front/centre/rear), manual with digital display positioning. Material stop (table surface) can be manually swivelled left and right within the range 30° - 90° - 30°, with positioning via measuring scale. Material depth stop adjustable manually using the sliding carriage and manual clamp, positioning via digital display. Iiedovtarnopfx Afisa

Tahun pembuatan: 1999, Kondisi: bekas, Saw blade diameter, vertical and horizontal: 500 mm Max. profile height: 280 mm Iodjvmz R Sjpfx Afioia Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swiveling material stop with locking points and digital display Notch height motorized adjustable with digital readout Motorized adjustment of angles with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Tahun pembuatan: 1997, Kondisi: bekas, Saw blade diameter, vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swiveling material stop with locking points and digital display Notch height motorized adjustable with digital readout Ijdpfox Ecg Uox Afioia Motorized adjustment of angles with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Complete saw line consisting of infeed unit, fully automatic circular saw, and outfeed unit Suitable for a wide range of applications, particularly in the photovoltaic and automotive industries. Infeed unit: Horizontal loading magazine Model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Max. material height corresponds to the saw cutting range, round stock max. diameter 130 mm 3 sliding strips between the belts for additional support Profile length: min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele Model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 control with touchscreen Reversal device with 5-fold stroke, up to max. 5,000 mm Electronic material feed 3–1,000 mm (single stroke) Cutting gap extension on both sides Iedpexvbvvsfx Afisia Pneumatic removal slide Waste flap after the saw for cut-offs / remnants Cut length depending on profile, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Outfeed: Support table area 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1015, Profile dimensions (HxW) up to 100x195 mm, 80x200 mm Automatic working cycle Drive via a 3 kW/400 V motor, 2850 rpm Saw blade: d=450x3.8x40 mm, z=110 Horizontal and vertical material clamping on the infeed side Iijdpfx Afswgmv Soiea Dosing spray installation Horizontal material clamping in the feed device Retraction of both clamping jaws during return stroke (prevents profile scratching) Steplessly adjustable hydropneumatic feed for the saw blade Saw blade advances from the rear Length of cut sections adjustable within 0-300 mm (with reversing device 0-600 mm) Cutting length adjustment via handwheel with mechanical counter Maximum width of profile to be cut: 200 mm Cutting range (height x width): 100x195 mm, 80x200 mm Automatic shutdown when material is depleted Option to connect an extraction unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, High-performance automatic saw / Manufacturer: PRESSTA-EISELE Ijdpew D T Uiefx Afijia Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance automatic saw with fully automatic operation * Very high cutting accuracy * Short cycle times * Burr-free sawing * High reliability * Low maintenance Suitable for aluminum and plastic, ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous application: Used for cutting corner connectors. Very well-maintained, ready-to-use condition. Technical Data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversing possible - Cut-off length: from 8 mm depending on the profile - Remaining piece length: from 90 mm depending on cut-off length - Operating pressure: 6 - 8 bar - Power supply: Standard 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Equipment: - Siemens S7 control panel - Fully automatic bar feed - Roller conveyors - Extraction unit - Chip bunker - Various accessories - CE marking No guarantee for completeness or correctness of technical specifications or equipment details. Subject to prior sale.

Tahun pembuatan: 1996, Kondisi: baik (bekas), nomor mesin/kendaraan: 9182, 23168 Technical Data: - Notching options and mitres on 3 levels - Right-angled, single-sided, double-sided, and triple-sided bevel cuts - Usable as a crosscut saw for shifting cuts - Pneumatic profile clamping, processing with semi-automatic saw aggregates - Saw blade dimensions: - Vertical: 500 x 3.5 x 40 mm, positive - Horizontal: 500 x 3.5 x 40 mm, negative - Notching width / notching height at 90°: 300 / 285 mm - Vertical saw blade: 60° - 90° - 25°, motorised positioning with digital display - Saw blade pivot range horizontal with vertical saw blade: 45° - 90° - 45°, motorised positioning with digital displays - Notching height adjustment with digital displays - Manual profile stop shoulder, swivelling 30° - 90° - 45° - Pneumatic coolant spray device - Air connection: 6 bar - Drive: 400 V / 2 x 3 kW Ijdpfx Asmb U E Aefisia - Space requirements approx.: W 2400 x H 2000 x D 1400 mm - Weight approx.: 1200 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 300 mm, panjang total: 405 mm, lebar total: 90 mm, tinggi total: 125 mm, berat keseluruhan: 500 kg, OMGA TR2 twin-blade crosscut saw for wood and aluminium – fully serviced, ready for operation Specification: • Condition: Used, after comprehensive technical maintenance • Manufacturer: OMGA • Model: TR2 • Main motors: 2 x 2.2 HP (3,000 rpm) Ijdsy Dpxdspfx Afisia • Pneumatic head control • Max cutting length: 320 cm • Min cutting length: 15 cm • Max cutting section: 85x140 mm (at 90°) • Max blade diameter: 300 mm • Mitre cutting range: -45° to +45° (left/right) • 3 operating modes • Vertical workpiece clamps • Weight: approx. 500 kg • Dimensions (L x W x H): 405 x 90 x 125 cm Additional information: • The machine is in good technical condition and ready for immediate use • The photos show the actual item for sale • On-site inspection and testing available • The auction price is net (excludes VAT and transport costs) Financing and transport: • We organize transport using MDD fleet, courier services, or external carriers • Financing available – leasing or lease loan options possible

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 9.365 h, Fungsionalitas: berfungsi sepenuhnya, Gergaji untuk pemotongan pipa dan profil besi Tahun pembuatan: 2019, 9365 jam kerja Panjang material masuk: 6000-7000 mm Diameter pemotongan: 12-100 mm Panjang keluaran: 50-2000 mm. Iijdpfxoy A Rpbj Afija

Tahun pembuatan: 1978, Kondisi: bekas, nomor mesin/kendaraan: 1078136, Behringer vollautomatische Sägemaschine in gutem Arbeitszustand. Isdsbta Dmspfx Afioia Kapazität Rundmaterial: 320 mm

Kondisi: baru, Tahun pembuatan: 2026, Product innovation: Sawing System Type "ORIX" The sawing system enables fully automatic processing of a wide variety of aluminium profiles. The machine features a robust base frame. For the positioning of the saw unit, linear star guides and precision carriages are used. The drives are equipped with servo motors. For cutting, the saw unit travels 300 mm forward on the Y-axis, allowing effortless sectioning of special profiles, plates, as well as Item and Bosch profiles. The support table consists of movable rollers, which are automatically positioned according to the required cutting length. All rollers are mounted on precision linear carriages. Additionally, the saw is equipped with a sturdy collection table for depositing the cut aluminium pieces. (Optionally, the cut pieces can be transported directly via a conveyor belt, including swarf removal.) The machine is available with a cutting length of 6,000 mm, resulting in a total system length of 7,000 mm. Delivery includes a corresponding 2-channel minimum quantity lubrication system. In addition, the system is supplied with either a 400 mm or 600 mm saw blade. Your Advantages: • Virtually scratch-free processing, as the material is not pushed over a cast iron table • Improved disposal of saw chips (no extraction required) • Extremely compact footprint: 4,000 mm / 7,000 mm Iisdpfefu Tgrox Afija • Minimal offcut (50 mm remainder length) • Safe operation (light curtain) • Easy material removal (conveyor belt or table with brushes) • No retraction required, as is the case with conventional saw automation • No loss of precision or length • Plug-in rollers accommodate all types of special profiles with a positive fit, ensuring perfect cuts Workflow: Enter the profile length in the control system. The saw unit will then move to the specified length. The operator loads the aluminium profile and activates the saw. The saw automatically locates the head-cut position using a sensor. The head cut is made. After cutting, the saw unit returns to its home position, and the saw automatically advances to the next input coordinate for repeat processing. These operations are repeated until the entire profile has been cut. All cut pieces are gently placed either on the collection table or on the conveyor belt. Material clamping is performed directly on the saw unit by means of vertical and horizontal clamps, as is standard with aluminium saws. Once the aluminium profile is fully processed, the saw unit automatically repositions to the next loading position. The cycle can be restarted as needed. Optional cross conveyors for automated feeding are available. For operator safety, fencing or a light curtain can be integrated. The control system is available in two versions: 1. Diethei control, 2. Siemens control. Optional material sorting by length or into different containers is possible. You are welcome to view the system at any time in our manufacturing/demo hall. Feel free to contact us for further information. We look forward to hearing from you! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specially developed for cutting profile and solid materials made of aluminium castings, copper, and hard plastics. Automatic material feed and automatic cutting movement make it ideal for fast and precise serial production! The material feed covers up to 700 mm per stroke. Multiple strokes — and thus longer cutting lengths — can be conveniently entered via the operator panel. The main vice clamps the material using two horizontal and two vertical clamping cylinders, while the material feed vice clamps with one horizontal and one vertical clamping cylinder. The cutting and feed speeds are adjustable to suit the material via the large, clearly arranged operator panel! The machine features mechanical adjustment of the cutting height, with a maximum cutting height of 100 mm. A large protective hood covers the entire working area and is raised pneumatically at the push of a button! As standard with the UK 350 A 90° CNC + drilling unit, a compressed air blow gun is supplied for cleaning the machine! The machine is equipped with connections for a chip extraction system. This model is fitted with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). It is integrated with the cycle control of the aluminium circular saw. Features: • Machine for 90° cuts, equipped with powerful drive motor • CNC control; input of quantities and cut lengths conveniently via the large and clearly arranged operator panel! • Storage of up to 20 cutting programs • Feed drive via servo motor, single feed stroke 700 mm (for longer pieces, automatic advance up to the desired length!) • Main vice with 4 pneumatic clamping cylinders, 2 horizontal, 2 vertical! • Feed vice with horizontal and vertical pneumatic clamping cylinders! • Large safety guard covering the entire working area, pneumatically lifted • Adjustable cutting and feed speed • Maximum cutting height 100 mm • Air gun for cleaning the machine • Connections for extraction system • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with tool holder • Adjustment of spindle speed, drilling depth etc. performed via the machine control; drilling cycle runs automatically Technical data: Drive power 1.9 kW / 400 V / 50 Hz Speed 3000 rpm Blade size 350 x 32 mm Iiodpfxjkqz H Do Afija Material feed single stroke 700 mm Max. cutting height 100 mm Dimensions 1400 x 850 x 970 mm Optional: available with loading magazine! We look forward to your enquiry! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is distinguished by its user-friendly operation and quick, convenient material changeovers. This model is designed exclusively for 90° cuts. The saw feed is actuated automatically at the push of a button, while material clamping is performed by two pneumatically operated vertical and horizontal clamping cylinders each. As standard, the machine comes equipped with a minimal lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are provided. Optionally, this saw can be fitted with a digital miter angle display, a marking laser, and a pneumatic guard lifting mechanism. Features - Large support table, powerful drive motor - Two-button control for initiating the sawing cycle (optionally available with single-button operation) - User-friendly control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be moved rearwards to increase cutting capacity - Large protection hood covering the entire working area - Minimal lubrication system with 2-liter reservoir Iijdjpa Nxdjpfx Afiea - Adjustable saw blade and feed rate - Air pistol for cleaning the machine - Saw blade diameter: 600 mm Work Sequence 1. Set the cutting angle 2. Insert the material 3. Adjust the feed speed 4. Position the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button to ready the machine 7. Press and hold both SAW buttons to start cutting 8. After the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material For technical data such as cutting range and performance, please refer to the data sheet attached to the email. We look forward to your inquiry! Plantec Maschinen GmbH