Beli Pressta Eisele Otomatis Mesin Gergaji Aluminium Pressta Eisele Profilma 500 bekas (83.687)

Tahun pembuatan: 2004, Kondisi: bekas, de982b7c Crjdpexn Iq Dofx Aiusc

Tahun pembuatan: 1998, Kondisi: bekas, Long-cut saw for cutting aluminium profiles with feed pusher, in very good condition. Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Maximum feed pusher stroke: 6,200 mm The machine is currently dismantled and stored in our warehouse. Credpowx I Hvefx Aiuoc Further technical data available on request.

Tahun pembuatan: 2009, Kondisi: bekas, Aluminium cutting system with 2 saw motors, each capable of performing independent 45° cuts. Material feed unit accommodating up to 8,100 mm. Cross conveyor, discharge table, chip conveyor, and extraction unit included. Soundproof enclosure. Control via Siemens S7 panel. Operating manual and additional documentation available; further technical details on request. The machine was operational up to the point of dismantling. Further technical specifications available on request or see photos. Crsdpeqzmnujfx Aiuec

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.809 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1559, diameter mata gergaji: 550 mm, panjang pemakanan sumbu X: 800 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, Rentang pemotongan baja bulat pada 90°: 190 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.850 rpm, ketinggian potong (maks.): 150 mm, berat keseluruhan: 1.650 kg, panjang bagian (min.): 3 mm, panjang bagian (maks.): 4.000 mm, kecepatan mata gergaji: 2.850 rpm, tegangan masuk: 400 V, penggerak gergaji: 7.500 W, diameter pemotongan: 270 mm, lubang pisau gergaji: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Maximum profile width 270 mm, Siemens S7 control with touch display incl. piece counter Includes CPU 315 and a Flexisoft, quantity multiplier for processing material bundles Cycle time indication in seconds, chain dimensions, includes reversing device for sections up to max. 4 m length Automatic shut-off via limit switch at the end of the material, error diagnosis, incl. IXON router for VPN connection, see data sheet Motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping device from bottom to top, on both infeed and outfeed sides of the saw head, cutting gap expansion on both sides of the saw blade, electronic material feed unit, 800 mm feed length, with ball screw spindle and servomotor, including pneumatic horizontal and vertical clamping units. The profile support area in the feed section is equipped with a lift/lowerable roller, minimum remainder length from 75 mm (profile-dependent), horizontal and vertical clamping pressure reduction with 6 pressure regulators, cycle spray device with level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame lined with insulation mats on the inside Crjdpey Dtpmjfx Aiujc 2 extraction nozzles Ø 100 mm, safety guard over the saw head and the feed unit, 740 mm roller conveyor with reach protection on the infeed side, 450 mm Pertinax table top with reach protection on the outfeed side Chip Extraction MG 3 Dust and chips are collected in a 172-liter metal container, which can be swung out for easy emptying 2 outlets with 100 mm hose adapter, without extraction hose, 3.0 kW drive, 400 V, 50 Hz, three-phase motor Max. air flow 2,600 m³/hr, negative pressure 30 mbar, with fan snail housing above the extractor Large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 db (A) Selector switch for continuous operation or operation controlled by the saw, without electric cable, paintwork: RAL 7035 / 9016

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1587 / 1588, diameter mata gergaji: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw Unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching Unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. Punching is performed vertically from above, with punch tool cassettes accommodating up to 8 profiles simultaneously. Material Feed: The material is fed via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per stroke. Control System: Modern versions are often equipped with a Siemens S7 control unit featuring a touch display for intuitive operation and precise programming. The machine is built for continuous industrial use and offers the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on equipment). Dimensions (Saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also customized financing options tailored to your needs. Whether down payment, installment plan, or individual financing models – together we will find the right solution. Upon request, we will also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and on-schedule process so you don’t have to worry about a thing. Crsdpfoyyz Txox Aiuoc 📞 Feel free to contact us for further information or a non-binding offer. We will advise you personally and professionally. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1589 / 1590, diameter mata gergaji: 500 mm, Fully automated sawing and punching machine for aluminum and plastic profiles The Profilma 502 ST-V combines precision sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex operations, and processing bundled materials. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Up-cut saw motion, motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round shaft guidance - Minimum offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punching unit (discharge side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2–3 seconds - Punch scrap ejection into frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2 × 3-liter tanks and fill level indicator - Soundproofing package: hood and saw blade guard insulated inside - Roller conveyor (740 mm) with reach-in guard on feed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety cover - Saw blade housing below tabletop Max. cutting capacity: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free Crsdjyyz Ebopfx Aiuec We not only offer you a high-quality product, but also tailored financing options designed to suit your needs. Whether down payment, installments, or individual financing models—we will find the right solution together. On request, we also handle complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process, so you do not need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1591 / 1592, diameter mata gergaji: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic pass-through process. Based on the Profilma 502 model, it is specially optimized for high-volume applications and combined operations—including the processing of entire profile bundles. Control is via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnostics. An IXON router allows secure remote access via VPN. Up to 10 punching positions can be programmed per job. The horizontal punching unit can be deactivated as required. Saw range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Continuously variable speed adjustment - Saw cut from below, motorized feed - Material feed: 3–800 mm, reversing up to 4,000 mm - Ball screw with servo drive and round shaft guide - Offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical and horizontal hydraulic punching unit (output side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke continuously adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punching scrap is discharged laterally from the machine frame - Conveyor belt 250 × 800 mm for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free connection for extraction control - Minimum quantity lubrication system with two 3-liter tanks and fill-level display - Noise protection package: hood and internal blade guard sound-insulated - Roller conveyor (740 mm) with reach-in protection on feed side - Robust stationary frame, working height: 960 mm - Manually opening protective hood - Saw blade housing under the table Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available. ---- Crjdpfx Aoyyzxhsiusc Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailored financing solutions to suit your needs. Whether it's a down payment, installment plan, or custom financing models—together we'll find the right solution. On request, we can also take care of the entire transport organization. From planning to reliable delivery, we ensure smooth and timely handling so you don’t need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We will be happy to provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, 2013 metal circular saw. This PRESSTA EISELE Profilma 400 V features a Ø400 mm saw blade diameter and a powerful motor with approx. 12 kW output. It offers automatic material feed and a pneumatic clamping system for efficient operation. If you are looking for a high-quality saw, you should consider the PRESSTA EISELE Profilma 400 V we have for sale. Please contact us for further details on this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500-5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Saw feed direction: Linear feed from top to bottom • Cutting principle: Cross-cut • Material feed: Automatic servo feed with repeat strokes for longer cut lengths • Material separation: Before saw blade retraction (no post-cutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force individually adjustable; interchangeable plastic/PVC jaws • Control: PLC-based; operation via control panel with display Codpjyyxxfefx Aiuerc • Features: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostic and error messages; machine status display • Saw blade lubrication: Minimal quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor power: up to 22 kW (multi-stage motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction system (to connect to Ø100/Ø160 mm ports)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, vollautomatische-bedienung-saegemaschine Crodpfxsyvtyvo Aiujc

Tahun pembuatan: 1999, Kondisi: bekas, Saw blade diameter, vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swiveling material stop with locking points and digital display Notch height motorized adjustable with digital readout Motorized adjustment of angles with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Credpfx Ajvmz R Ssiuoc Coolant lubrication

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, diameter mata gergaji: 550.500 mm, The machine is in perfect technical condition and has seen very little use. Designed for machining aluminium and PVC profiles. Mitre cuts possible on 3 levels; can be used as a notching saw. Manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, triple-sided mitre. Credpfx Aevtarnoiujc Profile processing up to 300 mm, width up to 90°; mitre cuts up to 30°. Horizontal notching depth up to 185 mm, vertical up to 210 mm at 90°. Cutting width at 90°: 300 mm; maximum profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical saw blade swivel range: 30° – 90° – 30° (front/centre/rear), manual with digital display positioning. Material stop (table surface) can be manually swivelled left and right within the range 30° - 90° - 30°, with positioning via measuring scale. Material depth stop adjustable manually using the sliding carriage and manual clamp, positioning via digital display.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, High-performance automatic saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance automatic saw with fully automatic operation * Very high cutting accuracy * Short cycle times * Burr-free sawing * High reliability * Low maintenance Crsdpfx Aiew D T Uieusc Suitable for aluminum and plastic, ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous application: Used for cutting corner connectors. Very well-maintained, ready-to-use condition. Technical Data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversing possible - Cut-off length: from 8 mm depending on the profile - Remaining piece length: from 90 mm depending on cut-off length - Operating pressure: 6 - 8 bar - Power supply: Standard 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Equipment: - Siemens S7 control panel - Fully automatic bar feed - Roller conveyors - Extraction unit - Chip bunker - Various accessories - CE marking No guarantee for completeness or correctness of technical specifications or equipment details. Subject to prior sale.

Tahun pembuatan: 1997, Kondisi: bekas, Saw blade diameter, vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swiveling material stop with locking points and digital display Notch height motorized adjustable with digital readout Crodpox Ecg Uofx Aiuoc Motorized adjustment of angles with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1015, Profile dimensions (HxW) up to 100x195 mm, 80x200 mm Cjdpfx Aiewgmv Sjusrc Automatic working cycle Drive via a 3 kW/400 V motor, 2850 rpm Saw blade: d=450x3.8x40 mm, z=110 Horizontal and vertical material clamping on the infeed side Dosing spray installation Horizontal material clamping in the feed device Retraction of both clamping jaws during return stroke (prevents profile scratching) Steplessly adjustable hydropneumatic feed for the saw blade Saw blade advances from the rear Length of cut sections adjustable within 0-300 mm (with reversing device 0-600 mm) Cutting length adjustment via handwheel with mechanical counter Maximum width of profile to be cut: 200 mm Cutting range (height x width): 100x195 mm, 80x200 mm Automatic shutdown when material is depleted Option to connect an extraction unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Complete saw line consisting of infeed unit, fully automatic circular saw, and outfeed unit Suitable for a wide range of applications, particularly in the photovoltaic and automotive industries. Infeed unit: Horizontal loading magazine Model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Max. material height corresponds to the saw cutting range, round stock max. diameter 130 mm 3 sliding strips between the belts for additional support Profile length: min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele Model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 control with touchscreen Reversal device with 5-fold stroke, up to max. 5,000 mm Electronic material feed 3–1,000 mm (single stroke) Cutting gap extension on both sides Pneumatic removal slide Waste flap after the saw for cut-offs / remnants Cut length depending on profile, from 8 mm Cedpexvbvvsfx Aiuerc Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Outfeed: Support table area 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Tahun pembuatan: 1996, Kondisi: baik (bekas), nomor mesin/kendaraan: 9182, 23168 Technical Data: - Notching options and mitres on 3 levels - Right-angled, single-sided, double-sided, and triple-sided bevel cuts - Usable as a crosscut saw for shifting cuts - Pneumatic profile clamping, processing with semi-automatic saw aggregates - Saw blade dimensions: - Vertical: 500 x 3.5 x 40 mm, positive - Horizontal: 500 x 3.5 x 40 mm, negative - Notching width / notching height at 90°: 300 / 285 mm - Vertical saw blade: 60° - 90° - 25°, motorised positioning with digital display - Saw blade pivot range horizontal with vertical saw blade: 45° - 90° - 45°, motorised positioning with digital displays - Notching height adjustment with digital displays - Manual profile stop shoulder, swivelling 30° - 90° - 45° - Pneumatic coolant spray device - Air connection: 6 bar - Drive: 400 V / 2 x 3 kW - Space requirements approx.: W 2400 x H 2000 x D 1400 mm - Weight approx.: 1200 kg Cedpsmb U E Aofx Aiuorc

Kondisi: baru, Halbautomatische Kappsäge SALVAMAC LEGEND 500 Maximum cutting height: 125 mm Introductory special price Included: - Semi-automatic crosscut saw SALVAMAC LEGEND 500 Maximum cutting height: 125 mm SAFE – SOLID – FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility, and reliability. Standard equipment: - Automatic safety and hold-down device - Ergonomically positioned two-hand operation - Rigid safety shield - Includes 500 mm carbide-tipped saw blade, Z = 108 Technical specifications: Cjdpfx Aievtrkisusrc Maximum cutting range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction port: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3-phase Working height: 900 mm +/- 20 mm Minimum distance between fence (left side) and saw blade: 70 mm Minimum distance between fence (right side) and saw blade: 520 mm Minimum distance between two fences (optional): 60 mm Note: Basic price without roller conveyors. When installing the saw, at least 1 m of support table or roller conveyor must be installed to the left and right of the saw. Included: - Roller conveyor without scale, right side, per meter Roller conveyor, 320 mm wide, with 100 mm fence ruler and galvanized rollers, Load capacity: 230 kg, Roller diameter: 60 mm, spacing: 250 mm, right side of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Included: - Roller conveyor with fence ruler and scale left, per meter Roller conveyor, 320 mm wide, with 100 mm fence ruler and galvanized rollers, Load capacity: 230 kg, Roller diameter: 60 mm, spacing: 250 mm, left side of the saw, price per meter Note: The fence must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Included: - Pneumatically retractable fence, 200 mm length - new display machine -

Kondisi: baik (bekas), Tahun pembuatan: 1998, Semi-automatic circular saw machine Manufacturer: KASTO Model: V350 U Year: 1998 With miter cutting capability, roller conveyor, and stop. Saw blade diameter: 350 mm Pneumatic vise and saw feed Crodpsfym Ewjfx Aiujc Infinitely variable (stepless adjustment). Machine with low operating hours, in good condition.

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 100708, panjang pemakanan sumbu X: 6.300 mm, panjang umpan sumbu Y: 250 mm, panjang umpan sumbu Z: 200 mm, berat keseluruhan: 2.500 kg, diameter mata gergaji: 700 mm, tegangan masuk: 400 V, lubang pisau gergaji: 30 mm, wij-bieden-deze-gebruikte-hm-hmz-automatische-doorvoer-machine-b ouwjaar-2008-aan Credpfxsy H Dblo Aiusc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, de-to-multi-001 Credpfx Aiey E Nkvsujc

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 300 mm, panjang total: 405 mm, lebar total: 90 mm, tinggi total: 125 mm, berat keseluruhan: 500 kg, OMGA TR2 twin-blade crosscut saw for wood and aluminium – fully serviced, ready for operation Specification: • Condition: Used, after comprehensive technical maintenance • Manufacturer: OMGA • Model: TR2 • Main motors: 2 x 2.2 HP (3,000 rpm) • Pneumatic head control • Max cutting length: 320 cm • Min cutting length: 15 cm • Max cutting section: 85x140 mm (at 90°) • Max blade diameter: 300 mm Credpfxoy Dpxdo Aiujc • Mitre cutting range: -45° to +45° (left/right) • 3 operating modes • Vertical workpiece clamps • Weight: approx. 500 kg • Dimensions (L x W x H): 405 x 90 x 125 cm Additional information: • The machine is in good technical condition and ready for immediate use • The photos show the actual item for sale • On-site inspection and testing available • The auction price is net (excludes VAT and transport costs) Financing and transport: • We organize transport using MDD fleet, courier services, or external carriers • Financing available – leasing or lease loan options possible

Tahun pembuatan: 1978, Kondisi: bekas, nomor mesin/kendaraan: 1078136, Behringer vollautomatische Sägemaschine in gutem Arbeitszustand. Cedpfobta Dmsx Aiusrc Kapazität Rundmaterial: 320 mm

Kondisi: baru, Tahun pembuatan: 2026, Product innovation: Sawing System Type "ORIX" The sawing system enables fully automatic processing of a wide variety of aluminium profiles. The machine features a robust base frame. For the positioning of the saw unit, linear star guides and precision carriages are used. The drives are equipped with servo motors. For cutting, the saw unit travels 300 mm forward on the Y-axis, allowing effortless sectioning of special profiles, plates, as well as Item and Bosch profiles. The support table consists of movable rollers, which are automatically positioned according to the required cutting length. All rollers are mounted on precision linear carriages. Additionally, the saw is equipped with a sturdy collection table for depositing the cut aluminium pieces. (Optionally, the cut pieces can be transported directly via a conveyor belt, including swarf removal.) The machine is available with a cutting length of 6,000 mm, resulting in a total system length of 7,000 mm. Delivery includes a corresponding 2-channel minimum quantity lubrication system. In addition, the system is supplied with either a 400 mm or 600 mm saw blade. Your Advantages: • Virtually scratch-free processing, as the material is not pushed over a cast iron table • Improved disposal of saw chips (no extraction required) • Extremely compact footprint: 4,000 mm / 7,000 mm • Minimal offcut (50 mm remainder length) • Safe operation (light curtain) • Easy material removal (conveyor belt or table with brushes) • No retraction required, as is the case with conventional saw automation • No loss of precision or length • Plug-in rollers accommodate all types of special profiles with a positive fit, ensuring perfect cuts Workflow: Enter the profile length in the control system. The saw unit will then move to the specified length. The operator loads the aluminium profile and activates the saw. The saw automatically locates the head-cut position using a sensor. The head cut is made. After cutting, the saw unit returns to its home position, and the saw automatically advances to the next input coordinate for repeat processing. These operations are repeated until the entire profile has been cut. All cut pieces are gently placed either on the collection table or on the conveyor belt. Material clamping is performed directly on the saw unit by means of vertical and horizontal clamps, as is standard with aluminium saws. Once the aluminium profile is fully processed, the saw unit automatically repositions to the next loading position. The cycle can be restarted as needed. Optional cross conveyors for automated feeding are available. For operator safety, fencing or a light curtain can be integrated. The control system is available in two versions: 1. Diethei control, 2. Siemens control. Optional material sorting by length or into different containers is possible. You are welcome to view the system at any time in our manufacturing/demo hall. Feel free to contact us for further information. We look forward to hearing from you! Plantec Maschinen GmbH Codpofu Tgrsfx Aiuerc

Kondisi: baru, Tahun pembuatan: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specially developed for cutting profile and solid materials made of aluminium castings, copper, and hard plastics. Automatic material feed and automatic cutting movement make it ideal for fast and precise serial production! The material feed covers up to 700 mm per stroke. Multiple strokes — and thus longer cutting lengths — can be conveniently entered via the operator panel. The main vice clamps the material using two horizontal and two vertical clamping cylinders, while the material feed vice clamps with one horizontal and one vertical clamping cylinder. The cutting and feed speeds are adjustable to suit the material via the large, clearly arranged operator panel! The machine features mechanical adjustment of the cutting height, with a maximum cutting height of 100 mm. A large protective hood covers the entire working area and is raised pneumatically at the push of a button! As standard with the UK 350 A 90° CNC + drilling unit, a compressed air blow gun is supplied for cleaning the machine! The machine is equipped with connections for a chip extraction system. This model is fitted with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). It is integrated with the cycle control of the aluminium circular saw. Features: • Machine for 90° cuts, equipped with powerful drive motor • CNC control; input of quantities and cut lengths conveniently via the large and clearly arranged operator panel! • Storage of up to 20 cutting programs • Feed drive via servo motor, single feed stroke 700 mm (for longer pieces, automatic advance up to the desired length!) • Main vice with 4 pneumatic clamping cylinders, 2 horizontal, 2 vertical! • Feed vice with horizontal and vertical pneumatic clamping cylinders! • Large safety guard covering the entire working area, pneumatically lifted • Adjustable cutting and feed speed • Maximum cutting height 100 mm • Air gun for cleaning the machine • Connections for extraction system • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with tool holder • Adjustment of spindle speed, drilling depth etc. performed via the machine control; drilling cycle runs automatically Technical data: Drive power 1.9 kW / 400 V / 50 Hz Speed 3000 rpm Blade size 350 x 32 mm Material feed single stroke 700 mm Max. cutting height 100 mm Dimensions 1400 x 850 x 970 mm Optional: available with loading magazine! We look forward to your enquiry! Plantec Maschinen GmbH Codpfxjkqz H Ds Aiuorc

Kondisi: baru, Tahun pembuatan: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is distinguished by its user-friendly operation and quick, convenient material changeovers. This model is designed exclusively for 90° cuts. The saw feed is actuated automatically at the push of a button, while material clamping is performed by two pneumatically operated vertical and horizontal clamping cylinders each. As standard, the machine comes equipped with a minimal lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are provided. Optionally, this saw can be fitted with a digital miter angle display, a marking laser, and a pneumatic guard lifting mechanism. Crjdpspa Nxdjfx Aiuoc Features - Large support table, powerful drive motor - Two-button control for initiating the sawing cycle (optionally available with single-button operation) - User-friendly control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be moved rearwards to increase cutting capacity - Large protection hood covering the entire working area - Minimal lubrication system with 2-liter reservoir - Adjustable saw blade and feed rate - Air pistol for cleaning the machine - Saw blade diameter: 600 mm Work Sequence 1. Set the cutting angle 2. Insert the material 3. Adjust the feed speed 4. Position the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button to ready the machine 7. Press and hold both SAW buttons to start cutting 8. After the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material For technical data such as cutting range and performance, please refer to the data sheet attached to the email. We look forward to your inquiry! Plantec Maschinen GmbH