Beli Proton Me-Line bekas (15.283)

Kondisi: baru, EN-ME-LINE – Air-cooled dehumidifiers are used for air drying at relative humidity (RH) levels up to 100% at temperatures of +45°C and above. EN-EU-LINE – Air-cooled dehumidifiers are used for air drying at relative humidity (RH) levels up to 100% at temperatures from -30°C to +40°C. Rust is the adversary of freshly blasted steel; high humidity combined with low steel temperatures creates ideal conditions for moisture condensation on the newly blasted surface. Flash rust is a major cause of premature coating failure. By reducing the relative humidity, Proton dehumidifiers are engineered to provide the optimal climatic conditions for blasting operations. Climatic conditions worldwide vary greatly, from cool and damp in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various technological approaches can be employed in the dehumidification process; certain dehumidification technologies perform more effectively than others when managing specific climatic conditions. Each Proton dehumidifier is manufactured to the highest quality standards and comes with regional certification. At the heart of the dehumidifier is a highly efficient and robust metal silicate rotor. The rotor contains numerous air channels aligned parallel to the shaft, ensuring a large internal surface area for adsorption of water vapor. The rotor is not affected by oversaturation, allowing the PROTON dehumidifier’s rotor to withstand long-term storage in high humidity environments without any loss of capacity. The PROTON dehumidifiers are specifically designed for corrosion protection in conjunction with sandblasting and painting operations, to preserve materials and prevent moisture-related problems. They meet the following requirements: • Available in sizes from 1,000 m³/h to 18,000 m³/h dry air capacity. • Available in precooled and postcooled versions for warm climates. Bjdpfx Aekw Ukusm Iswl • Robust construction with steel frame, lifting eyes, etc. • Key components can be easily serviced and replaced. • Large air intake grilles and filters. • Can be installed in containers for protection. • Adjustable dehumidification capacity and air outlet temperature in 4 stages. • Suitable for indoor and outdoor use. • Dry air pressure up to 1200 Pa. Technical Specifications: Dehumidifiers are available with airflow rates from 1,000 m³/h to 18,000 m³/h. PROTON dehumidifiers reduce the relative humidity (RH) from 90% to 10–15%. Dehumidifiers can remove up to 100 liters of water per hour.

Kondisi: baru, Rated ⭐⭐⭐⭐⭐ (5.0) – Trust the professionals! ⚡ Top service – Super fast delivery – Excellent customer support! ⚡ ✈️ Delivery in just 4-6 weeks! ✈️ ✅ Energy efficiency class A+++ – Permanently reduce operating costs! ✅ Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on our website's homepage. Bwodpfxsgf A Shj Am Iol 💸 Preserve liquidity – invest smartly! We offer flexible financing options such as leasing, hire purchase, or warranty packages so you can realize your investment without compromise. 📞 Contact us today – we provide individual, solution-oriented advice! ⏱️ FASTEST lead time in the market – direct from the manufacturer! ✨ Benefit from our price & quality advantage ✨ Rely on 40 years of experience in surface coating technology 🔥 UML-LINE – Continuous curing ovens for powder coating & wet painting 🟢 Optimized for automated systems 🟢 Continuous operation for maximum efficiency 🟢 Individually configurable – space-saving design 🟢 Minimal heat loss thanks to air curtain & air breaker 🟢 Choice of heating system: Gas | Diesel | Electric 🟢 Indirect heating – for maximum safety and perfect curing 🟢 Rapid installation due to modular construction 🟢 Manufactured according to current EU standards for safety, insulation & automation 🟢 Optional with automatic doors (electric/pneumatic) 🟢 Ideal for step-by-step systems ☀️ 2-year warranty – quality you can rely on! Request your quote now and secure your production edge! 🔧 Made by PROTON Maschinenbau GmbH – Quality that lasts.

Kondisi: baru, PROTON P-V LINE PROTON systems offer the ideal solution for the recovery and transport of explosive media, powders, plastic pellets, grains, sands, aggregates, and other bulk materials for both cleaning and material transfer applications. The main industries utilizing our equipment include blasting service companies, shipyards, tank cleaning enterprises, steelworks, foundries, power plants, cement industry, chemical industry, and more. Airborne dust is collected using a vacuum, while grain in the storage silo is gathered by its separator. Especially in hard-to-reach or enclosed spaces such as storage tanks, box girder structures, or tank installations at shipyards, the equipment delivers significant time and personnel savings. A PROTON vacuum system reduces costs by shortening cleaning times and reclaiming valuable materials. This versatile vacuum system is capable of extracting any material that can be moved through a hose. With its long reach and powerful suction, PROTON cleans tanks and pipes. There are two types of storage silos available, cylindrical and square, each with two levels. Technical specifications for standard machines: The cost-saving efficiency of the VC unit has been proven hundreds of times. In fact, most VC units pay for themselves within less than three months through reduced labor costs and material recovery. Units are available with capacities up to twelve tons per hour and a reach of up to 100 m (330 ft), equipped with motors ranging from 7.5 kW to 90 kW (3.98 m³/min to 72 m³/min). Performance data for air (p₁ = 1.0 bar, t₁ = 20°C, ρ = 1.2 kg/m³) At the heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction hose (reinforced with rubber) - Suction hose for the connection between the vacuum unit and hopper Bodpfx Aoghbkyem Iswl - Suction nozzle - Cam-lock and clamp fittings - Cartridge filter (spare) - Blower oil (spare) - Pressure gauge (spare) - Phase protection relay - All necessary mounting components

Kondisi: baru, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast delivery ⚡️ Outstanding support! ✈️ Shipping costs not included – Shipping available upon request.✈️ Quick delivery: Only 8-10 weeks after receipt of payment! ✅Important note: If you would like a quote for a blast cabin, please use the blast cabin configurator on the homepage of our website. ➖➖➖➖➖ ✳️Maintain your liquidity! We offer you a wide range of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ 💥 SR-LINE – Industrial Blast Rooms for XXL Applications 💥 🔧 Maximum performance, robust construction, intelligent design! Whether you are working on railway wagons, construction machinery, aircraft, or military vehicles – with our SR-LINE blast rooms, you can process even the largest and most complex workpieces reliably and efficiently! Our blast rooms provide a safe, clean, and high-performance environment for all types of surface preparation – whether for cleaning, roughening, or smoothing. _____ 🧩 Complete system with all essential components: ✅ Spacious main cabin with rubber lining for wear protection ✅ Emergency exit doors with safety windows ✅ High-performance sandblasting vessels in various sizes ✅ Pneumatic or mechanical abrasive recovery system ✅ Efficient dust collection system to ensure air quality ✅ Aftercooler, filter units, and robust steel construction Bwsdsghawmjpfx Am Isl ✅ Main control panel for central operation ✅ Lighting system for perfect visibility inside the room ✅ Optional: Overhead cranes, workpiece trolleys, wall-mounted multi-axis units for improved handling _____ ♻️ Economical & sustainable thanks to recovery system The abrasive is collected automatically or manually and recycled into the system – resource conservation made easy! _____ 🔒 Safety & comfort according to EU standards Our systems comply with current CE and safety standards and can be equipped with optional sound insulation for a more comfortable working environment. 💨 Fresh air systems with fans or suction lines ensure optimal air supply during the blasting process. _____ 📦 What is included in the SR-LINE blast system? • Blast cabin • Workpiece entry door & operator door with panel • Interior lighting & rubber lining • Blast vessel & abrasive storage tank • Recovery system with scraper blades • Dust filter & aftercooler • Hoses, lines & main control panel • Robust support frame ⚠️ Compressor and compressed air tank must be sourced separately. A suitable air duct is recommended. _____ 🚀 Why SR-LINE? ✔️ Custom planning for your requirements ✔️ Extremely durable materials & components ✔️ Designed for high performance and continuous operation ✔️ Made by PROTON Maschinenbau GmbH – 40 years of experience _____ 📞 Contact us now for a tailored offer – we are happy to advise you! 🛠️ SR-LINE – Your solution for large-scale blasting technology. ☀️ 2 YEARS WARRANTY ☀️ ☀️We provide CE certificates for all our machines and ATEX certificates for the required equipment.☀️

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Aggregate- und Schotterbrechanlagen werden zur Zerkleinerung und Aufbereitung verschiedener Materialien für Bau- und Infrastrukturprojekte eingesetzt. Diese Brecher sind darauf ausgelegt, große Gesteinsbrocken, Kies oder Steine in kleinere Stücke zu zerlegen, um Gesteinskörnungen und Schotter zu produzieren, die essenzielle Komponenten in der Bauindustrie darstellen. Nachfolgend finden Sie wichtige Aspekte zu Aggregate- und Schotterbrecheranlagen: 1. Backenbrecher: - Backenbrecher werden häufig für die Vorzerkleinerung in der Produktion von Gesteinskörnungen und Schotter eingesetzt. Sie arbeiten durch das Komprimieren des Materials zwischen einem festen und einem beweglichen Brechbacken. 2. Prallbrecher: - Prallbrecher eignen sich zur Formgebung und Herstellung von Feinanteilen. Sie brechen das Material durch Aufprallkräfte und sind für verschiedene Gesteins- und Erzarten geeignet. 3. Kegelbrecher: - Kegelbrecher werden typischerweise für die Sekundär- und Tertiärzerkleinerung bei der Gewinnung von Gesteinskörnungen eingesetzt. Sie sind effizient für die Produktion von gut geformtem und feinkörnigem Material. 4. Vertikal-Prallbrecher (VSI-Brecher): - VSI-Brecher sind für die Formgebung und Produktion von hochwertigem Kunstsand konzipiert. Sie nutzen das "Fels-auf-Fels"-Prinzip, wobei das Material im Rotor beschleunigt und gegen feststehende Ambosse geschleudert wird. 5. Kreiselbrecher: - Kreiselbrecher kommen hauptsächlich im Bergbau zum Einsatz, werden aber auch zur Produktion von Gesteinskörnungen verwendet. Sie verfügen über einen konischen Brechkopf und eine konkave Brechkammer, die das Material zwischen Kopf und Kalotte zerkleinern. 6. Mobile Brecher: - Mobile Brecher, darunter mobile Backenbrecher und Prallbrecher, bieten Flexibilität und Mobilität für die Aufbereitung von Aggregaten und Schotter direkt vor Ort. Sie werden häufig bei Bauprojekten eingesetzt, bei denen das Material direkt auf der Baustelle verarbeitet werden muss. 7. Siebe und Vorabscheider: - Siebanlagen und Vorabscheider werden nach der ersten Zerkleinerungsstufe eingesetzt, um unterschiedliche Korngrößen zu separieren. Vibrationssiebe sind üblich, um Material nach Korngrößen zu klassifizieren und zu trennen. 8. Förderbänder: - Förderbänder sind essenziell für den Materialtransport zwischen den einzelnen Zerkleinerungsprozessen und zur Haldenaufgabe der Endprodukte. Sie ermöglichen einen effizienten Materialfluss. 9. Staubbindesysteme: - Beim Brechen entsteht Staub, daher werden Staubbindesysteme eingesetzt, um Umwelt- und Gesundheitsbelastungen zu minimieren. Diese Systeme beinhalten oft Sprühnebelanlagen oder chemische Zusätze. 10. Qualitätskontrolle: - Maßnahmen zur Qualitätskontrolle, wie Korngrößenanalyse und Sieblinienprüfung, sind unerlässlich, um sicherzustellen, dass die produzierten Gesteinskörnungen und der Schotter den geforderten Normen entsprechen. 11. Umweltaspekte: - Beim Betrieb von Brechanlagen müssen Umweltvorgaben eingehalten werden. Dazu zählen Staubmanagement, Lärmschutz und die sachgemäße Entsorgung von Abfällen. Bei der Auswahl von Aggregate- und Schotterbrecheranlagen sollten Faktoren wie Materialart, gewünschte Korngröße, Produktionskapazität und Mobilitätsanforderungen berücksichtigt werden. Ebenso ist die Einhaltung von Sicherheits- und Umweltstandards bei der Nutzung von Brechanlagen unerlässlich. Bsdpoq Nxrxjfx Am Iowl

Kondisi: baru, ROOMLINE powder coating booths are designed for paint recycling and for preventing environmental pollution during the powder coating process of large parts. They operate on the principle of manual coating of products, which are either suspended from a rail or placed on a trolley. The booths are integrated into manual coating systems and are suitable for bar transfer systems. There are options for bringing products into the booth either hanging from above or on a lower trolley. The booth floor can either remain as the workshop floor as required, or the booth can be mounted on a frame with floor extraction provided. Versions with floor, sidewall, or rear wall extraction are available. The front of the booth can optionally be supplied with doors or remain open. Depending on occupational safety requirements and European standards, the booth can be equipped with features such as an emergency exit door, fire extinguishing system, camera monitoring, explosion-proof lighting, extraction system, and inverter-driven motors. The booth structure is built from sandwich panels and steel constructions of various thicknesses, depending on the project. Plug-in Dust Filter Systems: - Jet-Pulse Filter System - Mono Cyclone - Multi Cyclone Advantages: - Easy to use Bwsdpfxjggyigj Am Isl - Fast color change - Simple assembly and disassembly - Cleaner environment

Kondisi: baru, en-GB Bsdoc Uthdopfx Am Iewl

Tahun pembuatan: 2025, Kondisi: baru, en Bwedpfx Amjghf R Uo Ijl

Kondisi: baru, These units are made from galvanized sheet metal and are designed for complete bolted assembly, which minimizes the required shipping space. The extraction system is developed separately and specifically for each booth, ensuring optimal suction performance. Thanks to the extraction, the personnel applying wet paint are not affected by paint vapors. Environmental pollution in Elboy Wetline-KF wet paint spray booths is prevented by using either a combination of accordion and cartridge or roll fiberglass filtration systems. Wet paint particles extracted from the air by the suction fan are captured by the accordion filter at the rear of the booth. Bwsdjdy Dv Dspfx Am Iol Trace amounts of wet paint particles not retained by the accordion filter are caught by the secondary fiber filter at the back. The door system can be installed at the front access in various configurations. UV lamps can be placed inside the booth to inspect the painting process.

Kondisi: baru, en-GB Bwsdpfjggyk Esx Am Iol

Kondisi: baru, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✈️ Plus shipping costs – shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quotation for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Efficiency Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a wide range of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programmes. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and enjoy price and quality advantages!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion starts with perfect preparation – Chemical pre-treatment systems from PROTON◄ Before the coating can reach its full potential, the surface must be flawless. PROTON’s surface pre-treatment plants ensure that every contamination – whether oil, dirt or oxide – is reliably removed. This is the only way to achieve long-term corrosion resistance and excellent paint adhesion. Every product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology, or chrome-free technologies – we develop customised solutions for your requirements. Our pre-treatment systems – whether spray or immersion type – offer you: ✳️ Maximum energy efficiency ✳️ Reduced chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Robust construction from chemical-resistant stainless steel or plastic Our promise: Tailor-made technology for the most demanding requirements Our experienced project team will analyse your production conditions in detail and recommend the optimal pre-treatment system, tailored to your needs. We take all essential parameters into account – from heating capacity and water circulation to steam separation and chemical partitioning. Our spray washing lines are seamlessly integrated into your conveying equipment. All cleaning, rinsing, and drying processes are fully automatic and efficient – ready for a perfect coating application. Available systems: ✳️ Spray and immersion pre-treatment lines ✳️ Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️ Degreasing and pickling plants ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that matters. ⭐Follow us for new offers⭐ ☀️ 2 YEARS WARRANTY ☀️ Bwjdpfxokwct Uj Am Iel ☀️We provide CE certificates for all our machines and ATEX certificates where required.☀️

Kondisi: baru, Product description: Casting, forging, pressing, heat treatment, finished products, semi-finished products, steel production, etc. It is preferred for surface cleaning, pre-coating preparation, or refurbishment tasks. Its specific advantages include versatile blasting capabilities and the ability to blast both large and small parts with irregular geometries. Thanks to the digital timer integrated into our machines, the blasting time can be set according to the type of component and the required blasting area. Blasting is used in processes such as casting, forging, pressing, heat treatment of workpieces, blasting of finished products, blasting of semi-finished products, and steel manufacturing. Bodpfx Amjgha A Sj Iswl The machine is designed and manufactured according to the size, weight, and daily quantity of the parts to be blasted. Upon request, it can be configured as a continuous operation system and integrated into the painting line.

Kondisi: baru, en-01 Bwjdpec Uthxjfx Am Isl

Kondisi: baru, Automatic Sheet and Profile Shot Blasting Machine Preferred for surface cleaning tasks on products such as sheet metal, NPI, NPU, angles, profiles, etc. The parts to be blasted move in and out of the machine via roller conveyors. Turbines are installed in the machine body at appropriate angles so the surfaces of the parts can be blasted from both above and below. Bwsdpjghaywefx Am Isl Key advantages include rapid shot blasting of products. Both semi-finished and finished products can be transported via the roller conveyor and conveying system. The digital speed control system used in our machines can be adjusted for each load according to part type and desired blasting area. The machine is designed and manufactured according to the size, weight, and daily quantity of the parts to be blasted. Conveyor lengths can be extended or shortened upon request.

Kondisi: baru, TECHNICAL SPECIFICATIONS: Bwsdpfx Amjfw N Rto Iol Stainless steel materials such as V2A 304ss or V4A 316ss can be used according to the preferred surface treatment. The tank side walls are insulated with 50 mm glass wool. Tanks that require heating can be equipped with coil heating or electric heating systems. Temperature control is digital and monitored. If required, an air mixing device can be integrated into the tanks. Stainless steel ball valves are used for draining the tanks. OPERATING PRINCIPLE: The system operates on the principle of surface cleaning and treatment. Generally, the material to be treated is placed in baskets, which are then lifted by crane and immersed in tanks containing chemicals and/or water, where it remains for a designated period. The objective is to remove oil films from the metal surface and to form a thin protective film, thereby making the material more receptive to painting and more resistant to external influences. APPLICATION AREAS AND ADVANTAGES: Industries such as automotive, household goods, lighting, and general engineering benefit from this system—especially where continuous production is not necessary, or where high, uniform quality with reduced labor input is required. It is ideal in facilities where no alternative treatment is feasible due to the shape and size of the material or where very high capacities are not needed. Chemical and temperature parameters can be monitored and controlled via optional automation. APPLICATION: Immersion-type surface cleaning applications vary according to sector-specific requirements and strength criteria. The two principal applications include: - Iron phosphate surface treatment - Zinc phosphate surface treatment Additionally, the system can be used solely for cleaning and degreasing purposes. Optional equipment for the immersion tank: * Drying oven * 2 stainless steel baskets DRYING OVEN: In general, the operating principle of the drying oven, which constitutes the final stage in immersion-type surface cleaning systems, is similar to that of box ovens. However, to suit immersion-type cleaning processes, the lid components are positioned on the top of the oven, and the cleaned parts remain in the same basket for drying. In this drying system, the components are inserted into the drying oven and are ready for painting upon completion of the drying process.

Kondisi: baru, tinggi total: 3.500 mm, panjang total: 7.000 mm, lebar total: 4.000 mm, laju aliran volumetrik: 26.000 m³/jam, masa garansi: 12 bulan, tinggi dalam: 2.700 mm, panjang dalam: 6.900 mm, lebar dalam: 3.900 mm, tinggi kerja: 2.700 mm, Perlengkapan: dokumentasi / manual, kabin, en Bedpfx Amsipvulo Iowl

Tahun pembuatan: 2024, Kondisi: baru, en Bodoiiwa Dopfx Am Ijwl

Tahun pembuatan: 2023, jam operasional: 20 h, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, 🔥 3D-Druck-Filament-Extrusionslinie – DEMO-Gerät | 1,75–5 mm | Bis zu 100 m/min | 12 Monate Garantie Hochleistungs-Extrusionslinie zur Herstellung von Filamenten (3D-Druck, Schweißdrähte, technische Schnüre). Zuverlässige, vollautomatisierte Lösung direkt vom Hersteller. Komplett gefertigt in der Europäischen Union. _____ Hauptmerkmale • Einsatzmaterialien: ABS, PLA, PET-G, MARLEX, DOWLEX und andere • Filamentdurchmesser: 1,75–5 mm • SPS-Steuerung mit automatischem Betrieb • Dreiachsige Messung zur präzisen Durchmesserkontrolle • Kontinuierliche Produktion (Kompensator – bis zu 140 m Filament) • 3-Zonen-Kühltank (bis 80 °C) _____ Technische Daten • Liniengeschwindigkeit: bis zu 100 m/min • Ausstoßleistung: 5–20 kg/h • Schneckendurchmesser: 35 mm • Schneckenlänge: 30 L/D • Antriebsleistung: 9,2 kW • Kühltank: 6 m Bwsdoy Ipfljpfx Am Isl • Spulengröße: 0,5–5 kg (kein Stillstand beim Spulenwechsel) _____ Zustand • DEMO-Anlage – direkt vom Hersteller • Ausgezeichneter Zustand • Sofort verfügbar • Volle Werksgarantie für 12 Monate FCA BOCO Preis: 158.850,- EUR zzgl. MwSt. _____ Hersteller BOCO Pardubice Machines, s.r.o. (Tschechische Republik) Über 30 Jahre Erfahrung in der Kunststoffverarbeitungstechnologie

Kondisi: bekas, jarak tempuh: 32 km, daya: 96 kW (130,52 hp), pendaftaran pertama: 04/2023, jenis bahan bakar: diesel, berat keseluruhan: 2.940 kg, warna: hitam, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 5.531 mm, lebar total: 2.474 mm, tinggi total: 2.499 mm, panjang ruang muatan: 2.900 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Lini produksi industri HOMAG WEEKE ini diproduksi pada tahun 2007. Lini ini dilengkapi dengan sistem lengkap untuk pemrosesan panel volume tinggi dan edge-banding, termasuk sistem pemuatan otomatis, konveyor rol sentral, beberapa modul edge-banding, serta manipulator portal untuk penumpukan. Cocok untuk produksi kayu yang efisien, memastikan penanganan yang cepat dan presisi. Pertimbangkan kesempatan untuk membeli lini produksi industri HOMAG WEEKE ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Bedpfxsx D Dq So Am Iewl Jenis Aplikasi Produksi Lengkap

Kondisi: bekas, EVG G95 Mesh Welding Line 2.5 x 6 m Mesh welding lines for efficient production of standard reinforcement mesh in medium to large batches. - Automatic and ultra-dynamic wire feeding from coils Bwodpfx Amoymb Unj Ijl - Very high production speeds with single-pass welding lines - Utilization of double spot welding as the ideal technology for the thick wire diameter range Scope of supply: Complete machine with supports. Optional: Fixed coils up to the discharge conveyor belt. Technical data: Longitudinal and cross wire diameter: 5 – 12 mm Longitudinal wire spacing: 100, 150, 200 mm 36 horizontal longitudinal wire holders for 3-ton coil Cross wire switch with double horizontal decoilers Blank tying and lifting machine not included. Maximum welding width: 2,600 - 3,200 mm Longitudinal and cross wire diameter: 5 – 12 mm Longitudinal wire spacing: 100, 150, 200 mm 36 horizontal line wire holders: for 3-ton spool

Tahun pembuatan: 2010, Kondisi: bekas, METAL SHEET ROLL FORMING LINE FOR ROOF TILE PANELS ILKWANG Reduced price for urgent sale Scope of supply 1. Decoiler 2. Front shear + coil guiding table 3. Film applicator 4. Base sections of cassette-type roll forming machine 5. Roll forming machine for “COPPO” tile profile 6. Roll forming machine for “ATIIKA” tile profile 7. Roll forming machine for “T177.5” tile profile 8. Cut-off machine: Flying cut-off type 9. Stretching section 10. Automatic stacker 11. Electrical control panel Technical specifications Bwedpfx Aoymbfyjm Iol - Manufacturer: IL Kwang (Korea) - Year of manufacture: 2010 - Material: Pre-painted galvanized steel sheet (ASTM A 526 / JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPa - Maximum coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Maximum coil weight: 15 tons - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control via inverter - Utility voltage: 380 V / 50 Hz, 3 phases - Dimensions (L x W x H): Approx. 30 x 8 x 5 m Component manufacturers - Motor: Siemens (ICE type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with CE) - Touchscreen: Pro-face (with CE) - Electrical components: L.G (with CE) Utility voltage: 380 V / 50 Hz, 3 phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted galvanized steel sheet (ASTM A 526 / JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPa Maximum coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Maximum coil weight: 15 tons Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with CE) Touchscreen: Pro-face (with CE) Electrical components: L.G (with CE) Speed control: Frequency control via inverter Inner coil diameter: 508 mm Dimensions (L x W x H): Approx. 30 x 8 x 5 m

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1 h, ATTENTION: Bwodpfxsbrpr Uj Am Iol "This is NOT a cheap ASIAN product that, if at all, just barely lasts through the warranty period!" All our machines are designed for A MINIMUM of 15–20 years of frequent and heavy-duty use! ATTENTION: As of January 2019, the MEGA

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 2024, We have one or two questions for you: Why do you spend so much money every year on having your drill tools ground externally or on frequently purchasing new carbide (HM/VHM) or HSS twist drills? Why not make a one-time investment in a professional drill grinding machine and have it pay for itself within just a few years? In the long term, you save money, material, tied-up capital, spare your employees’ nerves, and most importantly, gain valuable time that you can use for other tasks! Drill grinding machines from BERGER are: precise – fast – user-friendly – cost-effective – value-retaining They help you increase productivity. These ergonomic and easy-to-use precision drill grinders offer you, among other things, the following advantages: · Significantly increased tool life due to evenly distributed cutting forces on both cutting edges · Considerable reduction of feed force thanks to precise, symmetrical point thinning · Improved diameter accuracy – precise and adjustable point geometries produce bore diameters corresponding exactly to the drill’s nominal diameter · High positional accuracy – the sharp drill point, thinned right to near the center, prevents the drill from “walking” at first contact, enabling it to cut smoothly and precisely, like a center drill for CNC machines · Re-grinding, thinning, and checking – all in a single clamping · Perfect drill point geometry including web thinning in just one minute · Drastically reduced need for new drill tools, as you can now regrind/resharpen your existing drills up to 40 times or more in-house, regardless of whether they’re HM/VHM or HSS drills · We manufacture the machine completely in-house and use it daily in our own parts production – so we know what we’re talking about! · SWISS MADE – quality that will reliably serve you for decades! The prices for our three different professional drill grinding machines start at EUR/CHF 3,600 to 14,950 (depending on model and configuration). Technical Data Infinitely adjustable point angle: 80°–150° (optionally up to 180°) Chuck with collets for drill diameters 1–6.5 mm Chuck with collets for drill diameters 7–20 mm Optional collet set for drill diameters 20–30 mm Infinitely adjustable lip clearance: 0–40° Point-thinning device, stepless thinning depth adjustment Bwsdpfx Ae R R R Ssm Iel CBN double grinding wheel, fine/coarse, D 125 mm Optional diamond grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for point thinning D 50 mm x 4 mm Motor power: 0.3 kW Spindle speed: 2,800 rpm Electrical connection: 230 Volt, 50 Hz Dimensions (L x W x H): approx. 50 x 50 x 50 cm Weight: approx. 42 kg

Kondisi: bekas, Vollständige Wärmebehandlungsanlage zu verkaufen Die Linie umfasst: (Alle im Jahr 2023 modernisiert) 1. 1 Stück AKF1 IPSEN TQF 4 EM 1977, Atmosphärischer Ofen 2. 1 Stück AKF2 IPSEN TQFRA 5 EM 1991, Atmosphärischer Ofen 3. 1 Stück AKF3 IPSEN T4 EM 1972, Atmosphärischer Ofen 4. 1 Stück AKF4 IPSEN TU-5 EM 1970, Atmosphärischer Ofen 5. 1 Stück HSH 2011, Spannungsarmglühen, Blankglühen 6. 1 Stück Ipsen Dac 5 ER 2011, Nitrieren, Spannungsarmglühen 7. 1 Stück Ipsen DAC 4 1980, Spannungsarmglühen, Blankglühen Bedpfxjw Dhuqe Am Ijwl 8. 1 Stück HSH 2007, Spannungsarmglühen, Blankglühen 9. 1 Stück BOREL 1987, Einsteckofen für Spannungsarmglühen 10. 2 Stück Ipsen 1972, Spannungsarmglühen 11. 1 Stück Be- und Entladefahrzeug 12. 1 Stück Entladefahrzeug Alle Öfen sind bereits demontiert und versandbereit.