Beli Romer / Catalog Prices Automat bekas (40.730)

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Each tank is represented by its own unique symbol and name for intuitive operation by the user. Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches Ncsdpfjflmdbox Adisw • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Pricing information is available in the catalog.

Kondisi: baru, Tahun pembuatan: 2024, de Nodpfx Asflpi Nodiecw

Kondisi: baru, Tahun pembuatan: 2026, de Nedpfoyfim Asx Adiecw

Tahun pembuatan: 2020, Kondisi: baru, Automation Use of a photoelectric sensor The use of a photoelectric sensor in the workpiece area enables you to measure the length of the workpiece and, consequently, gives you the ability to activate the spray guns when the object is within range, and to immediately switch off the guns once the workpiece has been completed. The photoelectric sensor is included as standard equipment. Identification of parts using special tags A plate with identification holes is placed over the hanger. Based on this, the PLC controller, in conjunction with the photoelectric sensor, recognizes the painted part, switches the guns on and off at the correct time, and thus reduces energy and powder consumption. Vertical detection of workpiece details By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the moment when the detail should appear in the gun zone, enabling the selective activation or deactivation of the guns. Use of light barriers with multiple sensors both horizontally and vertically This solution allows precise measurement of the workpiece dimensions, enabling adjustment of the manipulators as well. Advantages of using light barriers and photoelectric sensors The main advantages of using photoelectric sensors or light barriers are energy and powder savings. Eliminate painting in zones where there are no parts. With the use of light barriers, precise control of the guns is achieved. Our lines can optionally be equipped with photoelectric sensors or light barriers. The use of a photoelectric sensor in the workpiece area enables you to measure the length of the workpiece and, consequently, to activate the guns when the object is within their range and to immediately switch off the gun once the workpiece has been completed. Identification of details using special tags A plate with identification holes is placed over the hanger. Based on this, the PLC controller, in conjunction with the photoelectric sensor, recognizes the painted part, switches the guns on and off at the correct time, thus saving energy and powder. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the time when the detail appears in the gun chamber, enabling selective activation or deactivation of the guns. Use of light barriers with multiple sensors horizontally and vertically This solution allows precise measurement of the workpiece dimensions, enabling the manipulators to be adjusted as well. The advantages of using photoelectric sensors or light barriers are primarily powder and energy savings. Eliminate painting zones where there are no parts. With the use of light barriers, precise control of the guns is achieved. Gun array vertical 8 pcs. guns Control - profiControl 10" Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 Manipulator MA1-23 x 2 pcs. Ncsdeflq Spspfx Adiew Os X MX-100 x 2 pcs. Horizontal gate - Horizontal gate W400 x 2 units Vertical gate - H2000 vertical gate Maximum painting speed is 1.65714285714286 m/min 0 pcs. tug units Airflow required: 10,188 m³/h Minimum cabin passage required: B900mm H2100mm Duct diameter: 500 mm - minimum 16.9 m/s, 16 m/s Air consumption: 1210 l/min + recommended SC-20 compressor Min. St

Tahun pembuatan: 2026, Kondisi: baru, ROMER cabins are equipped with four-inch color touchscreens. The cabin operation is intuitive and can be controlled in three modes: automatic (timer-based), automatic (triggered by a clogged filter sensor), or manual. Automatic Filter Cleaning The electronic system for automatic filter cleaning features an adjustable range for cleaning frequency and burn-off timing. Each filter is cleaned individually, and the filters can also be cleaned manually at the touch of a button. From experience, we know that it is often difficult for operators to carry out regular filter cleaning. Thanks to this system, the operator no longer has to worry about it. Aluminum fans are very quiet, operating at 74-79 dB—which is not much. It is difficult to have a conversation, even with a standard cabin configuration. Browse through the cabin Ncsdpfefzkzhjx Adijw By moving the lifting rails inside the cabin, the work efficiency is improved and relieves the operator from having to move them manually.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. Nodpfxsfz A H Do Adijcw - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Kondisi: baru, Tahun pembuatan: 2020, powder-coating-booth-kpo-3-de Ncodpfx Adeflk Akoiow

Tahun pembuatan: 2020, Kondisi: baru, The use of a photocell in the part's working area enables measurement of its length, thus allowing the spray guns to be activated when the part enters their range and deactivated immediately after painting is completed. The photocell is included as standard equipment. Part identification with special tags. There are identification plates with holes mounted on the workpiece sling. Based on this, the PLC controller together with the photocell detects the painted part, turning the guns on and off at the right moment, thereby saving energy and powder coating. Vertical shape detection of the part. Nsdpsfy T Arjfx Adiecw The use of light curtains with horizontal sensors allows the PLC controller to analyze the part’s vertical shape. The PLC calculates the expected time for the part to arrive within the gun area; this enables selective activation or deactivation of the guns. Utilization of light curtains with multiple sensors, both horizontal and vertical. This solution enables precise measurement of the part’s dimensions, allowing for manipulator control as well. Benefits of using photocells or light curtains include primarily the savings of powder and energy by avoiding paint application in areas with no part present. With light curtains, precise gun control is possible.

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Ncsdpjfy T Szjfx Adijw Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Each tank is represented by its own unique symbol and name for intuitive operation by the user. Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Pricing information is available in the catalog.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Ncjdpfx Aefz I D Djdisw Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, Nedpoflmdwefx Adiecw This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option. Nedpsfz Ndyjfx Adiscw

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). Ncodpoflrc Ssfx Adijw - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KAP1, kebutuhan udara: 16.000 m³/jam, daya: 36 kW (48,95 hp), kapasitas hisap: 16.000 m³/jam, Perlengkapan: kabin, Dielektrische automatische Pulverbeschichtungsanlage KAP1 Preis: 492.693,30 PLN + MwSt. Elektrische und Energiedaten • Spannung: 400 V (3P + N + PE) • Anschlussleistung: 36,34 kW • Pneumatikanschluss: 1" • Luftdruck: mind. 6 bar • Luftqualität: Öl < 0,1 mg/m³, Wasserdampf < 1,3 g/m³ • Luftverbrauch: 1.710 Nl/min (Betrieb) • Kompressor: SC-30 • Lufttank: 1.800 L Lackierparameter • Beschichtungsgeschwindigkeit: 1.933 mm/min • Bauteilmaße: 800 x 1.800 mm • Aufhängehöhe: 500 mm • Schichtstärke: 100 µm • Pistolenanordnung: vertikal Technische Daten und Ausstattung • Ausführung: dielektrischer Kunststoff • Durchgangsmaße: 1.000 x 2.400 mm • Luftdurchsatz: 12.348–16.000 m³/h • Pulverzentrum: ProfiCenter CP02 • Manipulatoren: 2 Stk. • Pistolen: 8 automatisch, 2 manuell (ProfiSpray) Ncodpfxjv Rpx Sj Adiow • Werkstückerkennung: ja (Höhe, Breite) • Systeme: Zyklonabscheider, ProfiControl, Traversenzug • ATEX: Zone 22, II 3D Plattformen und Kabinenkörper • Plattformen: Ein- und Auslauf, Edelstahlboden, rutschhemmende Treppen • Verkleidung: dielektrischer Kunststoff, LED-Beleuchtung, Aussparungen für Manipulatoren Luftmesser und Absaugkanal • Automatische Bodenreinigung • Absaugkanal mit pneumatischer Klappe Pistolenabblasung und Steuerung • Automatisches Pistolenabblasen • 10" Touchpanel, 50 Programme, Manipulatorsteuerung, Absauganlage, Fahrgeschwindigkeit X-Achse und Werkstück-Zug • Automatische Pistolenpositionierung • Werkstück-Zug: Geschwindigkeit 570–2.830 mm/min, 2 Zugvorrichtungen Die Maschine beinhaltet außerdem: • ProfiSpray A Applikator • PSS-1 Steuergerät • PM-1 Pistolen • ProfiCenter CP-02 Pulverzentrum • CK-D1400L Zyklon-Absauganlage • MA1-180 Manipulator und MX1-10 X-Achse • OZ-12H Absauganlage • ProfiControl 10" Steuerung • BP-H2000 W900 Werkstück-Messsystem

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Each tank is represented by its own unique symbol and name for intuitive operation by the user. Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control Nsdpsfzq Stefx Adijcw • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Pricing information is available in the catalog.

Tahun pembuatan: 2020, Kondisi: baru, ROMER is also engaged in the production of overhead conveyor systems. Cross transfers (lateral transport systems) are designed and manufactured for specific installations. Examples of equipment are listed below: Transport systems Depending on customer requirements, the transport systems can either move on the floor or be suspended from rails. - For efficient solutions in manual installations, we recommend overhead cross beams (lateral transport). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an excellent solution for companies focused on quality and process repeatability. - For businesses that produce different items simultaneously and, for example, operate multiple booths with various colors, flexible solutions utilizing power-free conveyors are used. This is the most expensive option. Nodpfx Asfz Difodiecw

Tahun pembuatan: 2020, Kondisi: baru, ROMER is also involved in the production of overhead conveyor systems. Cross traverses (cross transport) are specially designed and manufactured for certain installations. Below are some examples of equipment: conveyor systems. Depending on customer requirements, the conveyor systems can either be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross beams (cross transport). Ncedpofz Dibefx Adiew - For automated systems, chain conveyors are most commonly used; these run continuously without stopping and are an excellent solution for companies focused on process quality and repeatability. - For businesses that manufacture different products simultaneously or have several booths for various colors, flexible solutions using a gravity conveyor are implemented—this is the most expensive solution.

Kondisi: sangat baik (bekas), pl-hu-01 Ncedpsyw Iagefx Adiew

Kondisi: baru, Tahun pembuatan: 2022, nomor mesin/kendaraan: 157, Harga mulai dari 2250,00 € (belum termasuk pajak) Model.....SC-10.....SC-20..... SC-30 Debit pada 7 bar ..1350 L/menit.....2500 L/menit.....3800 L/menit Debit pada 8 bar ..1200 L/menit.....2300 L/menit.....3400 L/menit Pendinginan.....Udara.....Udara..... Udara Pengoperasian.....Listrik.....Listrik .....Listrik Volume oli .....6 L.....10 L..... 11 L Tingkat kebisingan dB(A).....66 dB.....68 dB.....70 dB Daya nominal.....7,5 kW.....15 kW..... 22 kW Kecepatan putar.....1440 RPM.....1460 RPM..... 1470 RPM Tegangan listrik (V ).....400 V+N+E.....400 V+N+E.....400 V+N+E Dimensi luar – Casing T x L x P .....1050 x 700 x 850 mm .....1100 x 800 x 1050 mm ..... 1250 x 850 x 1150 mm Berat .....520 kg.....650 kg..... 770 kg Saluran keluar udara bertekanan.....1".....1"..... 1, 1/4" Harga:.....3000 EUR.....4920 EUR.....6150 EUR - Model AD-10N Kapasitas aliran 1500 L/menit Daya 0,62 kW Ukuran sambungan 1“ Pengoperasian Listrik Tegangan listrik (V) 220-240 V Tekanan masuk hingga 10 Bar Daya nominal 7,5 kW Dimensi luar – Casing T x L x P 760 x 500 x 780 mm Berat 55 kg Kompresor yang sesuai: SC-10 Ncodpfobu N Tbex Adiow AD-20 -- 1500,00 € AD-30 -- 2000,00 € Harga 1000 EUR Garansi 12 bulan MITRA BERBICARA BAHASA JERMAN DI JERMAN SILAKAN HUBUNGI KAMI Harga khusus untuk pembelian satu set lengkap. Waktu pengiriman sekitar 4 hingga 7 hari setelah pemesanan. Biaya pengiriman akan dihitung secara individual.

Kondisi: baru, Tahun pembuatan: 2023, A typical coating line consists of surface pre-treatment (cleaning and/or application of a conversion coating), intermediate drying, electrostatic coating zone (booth / manual powder coating system), and an oven (curing oven). The workpieces are transported by a conveyor system. Our company, ROMER®, designs, manufactures, and installs complete powder coating lines. Our systems can be inspected and tested in Huerth, near Cologne. Request a tailored offer for a system customized to your application. Ncsdpfxscv Nl Rj Adiow

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Model MAS-30-2 Working Area (WxDxH): 1200 x 1800 x 300 mm Drive: Electric Rated Power: 21 kW Rated Voltage: 380 V Frequency: 50-60 Hz Number of Nozzles: 250 pcs. Pump Capacity: 1200 L/min Mixing cleaning agents not possible – separate nozzles Nozzle Type: Chemically neutral Operating Temperature: 20 - 60°C Number of Cleaning Phases: 2 Ncsdscubgpepfx Adiew Tank Capacity: approx. 1200 L Filtration: Yes Manufacturer's Warranty: 12 months

Tahun pembuatan: 2022, Kondisi: baru, Service – Preparation of an Offer for a Powder Coating System from Romer. Direct from the manufacturer Nodpfsfnk H Sox Adiocw romer-germany Manufacturer of powder coating systems and industrial ovens, plant engineering Delivery time approx. 10 to 16 weeks Shipping costs to be calculated separately.

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Recirculating Curing Oven Powder Coating Oven NEW SLS-90/O * D+t Pass-Through Oven, Divisible Working Dimensions: 1400 mm width x 2000 mm height x 6500 mm depth Ncedpfscutrlox Adijw External Dimensions: 1920 mm width x 2810 mm height x 6800 mm depth Power Supply: Electric Rated Power: 90 kW Voltage: 380V Frequency: 50-60 Hz Door Type: 2 doors on both sides – pass-through oven Anti-Ex lock Warm-up time: 15-30 min. (180°C) Homogeneity:

Tahun pembuatan: 2019, Kondisi: baru, nomor mesin/kendaraan: BI3, Annealing oven for stress-relieving and forming of acrylic glass The oven is equipped with two doors on one side and two narrow doors with a rail system at the rear. The sheets are suspended there and pneumatically clamped and released via foot pedal. - Maximum oven temperature: 230°C, with a sustained temperature deviation of +/-3°C from the setpoint at 75°C. - Internal dimensions: approx. width 1600 mm x depth 2000 mm. The rail system allows the oven to accommodate hanging sheets up to 1800 mm in height. - The rail system can be seen in the attached images and can also be mounted on the front side. It is suitable for panel thicknesses from 1.5 to 25 mm and can support a maximum sheet weight of 150 kg. - Power output is adjustable in several stages. Nodpfx Aeb Nzycjdijcw - Air circulation: approx. 3,000 m³/h. - For safety reasons, the doors can also be opened from the inside. - Safety device: in the event of fan failure, the heater is automatically switched off.

Tahun pembuatan: 2019, Kondisi: baru, Creation of a written offer / cost estimate for a Romer powder coating system. Ncsdpfx Aoc Sd D Sodiow