Beli Satu Sisi, Tinggi 4,16M, Lengan 1,20M, 750Kg bekas (13.926)

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 4.16m high, 1.20m arms, 750kg per arm – New –: Price ex works, including loading! 1 racking unit with 4 uprights: €2,300 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also create longer or shorter racking units by omitting or adding uprights, or by varying the bay spacing. The example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 100 Uprights: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity with load centre 600 mm: 750 kg per arm / 2250 kg per upright For 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal braces e = 1300 mm, standard is 1.3m – unless otherwise specified, we will supply the racking with a bay spacing of 1.3m. Other spacings possible (e.g. 1m, 1.25m) also available at a small surcharge: 1.5m or custom dimensions! Standard delivery length for one row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Isdpfeddmp Uex Afisar Other configurations (upright height, arm length, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Price ex works, including loading! Ijdpfsddmp Ajx Afisar 1 racking unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport costs within Germany (excluding islands): €430 (net)! You can of course build longer or shorter racking units by omitting or purchasing additional frames (or by using varying axle spacings). This example with 4 frames represents the most common racking solution! A hot-dip galvanized cantilever racking system comprising: - Single-sided racking uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 - Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms - Load capacity per arm (load center 600 mm): 750 kg / per upright 2,250 kg - With 4 uprights per level: 4 x 750 kg = 3,000 kg; arms IPE 100 - Supplied with longitudinal and diagonal bracing, c/c spacing 1,300 mm (standard is 1.30 m); if no other specification is given, racks will be delivered with 1.30 m axle spacing. Other spacings possible, e.g., 1 m, 1.25 m, or 1.50 m for a small surcharge, or custom measurements. - Standard overall length for a single row with 4 uprights is approx. 4,000 mm. - Delivery includes all bolts and nuts, but excludes floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us for advice!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 2.60m height, 1m arms, 600kg per arm, hot-dip galvanized – New – : Price: €1,485 (net, ex works) Transport within Germany (excluding islands) €430 (net) Of course, by omitting or purchasing additional frames, you can build longer or shorter racking units (as well as setting different pitch distances); this sample configuration with 4 frames is simply the most common solution! A hot-dip galvanized cantilever racking system, comprising: German brand manufacturer, new equipment Description: - Single-sided upright 2,600 mm high, hot-dip galvanized - Base and arm depth 1000 mm - Each with 3 height-adjustable racking arms - Load capacity at 500 mm load center - 600 kg per arm / 1,800 kg per upright With 4 uprights per level: 4 x 600 kg = 2,400 kg Profiles: Uprights: IPE 140, Arms: IPE 80 With longitudinal and diagonal bracing, pitch = 1300 mm, standard is 1.30m – unless otherwise specified, we will supply the racking with a 1.30m pitch. Other pitches possible, e.g., 1m, 1.25m, for a small additional charge also 1.50m or custom dimensions! Standard delivery length for a row with 4 uprights is approx. 4,000 mm. Supplied with all bolts and nuts, without floor anchors. Iedpfjd Epfvox Afiear Other configurations available (frame heights, arm lengths, arm types, etc.)! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, 1 racking unit with 4 uprights €2,120 (net)! Surcharge for cantilever arms with guardrails for this rack: €40 Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional frames (or by using different bay widths), this example with 4 frames is simply the most common racking solution! Iaodpfoddmqnox Afijr A cantilever racking system, hot-dip galvanized, consisting of: Single-sided upright, approx. 3,500 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity with a load center of 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per storage level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, center distance = 1,300 mm; standard is 1.30 m. Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a length of 1.50 m onwards, a small surcharge applies to the stated price! Special dimensions (other bay widths) are available on request, but will also incur a surcharge and have a longer delivery time as they must be made to order! If you do not specify a different bay width, we will deliver the rack with a bay width of 1.30 m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany via parcel service directly from Würth), excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) are available! Please contact us!

Tahun pembuatan: 2017, Kondisi: baru, Cantilever racking, double-sided, 3.50 m height, 1.20 m arms, 750 kg per arm – NEW: Price ex location, loading included! 1 racking unit with 4 uprights €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50 m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2 x 3 adjustable arms, 1.20 m long, load capacity 750 kg per arm - With braces approx. 1.30 m - Double-sided uprights, approx. 3500 mm high, galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at 600 mm load center: 750 kg per arm / 2250 kg per upright - With longitudinal and diagonal bracing, c/c = 1300 mm, standard 1.30 m - Other standard bay lengths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - For lengths from 1.50 m, a small surcharge applies to the stated price - Custom dimensions (different bay distances) available on request, surcharges apply and lead time is longer as they are custom-made Ijdpeddmtqofx Afijar Unless you specify otherwise, racks are supplied with a bay distance of 1.30 m. With 4 uprights (3 bays) per racking row, total length is approx. 4 m. Supplied including all bolts and nuts (delivered within Germany directly from Würth by parcel service), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Single-sided cantilever rack, 3m height, 1.20m arms, 500kg per arm – New –: Price ex location, incl. loading! 1 racking unit with 4 uprights: €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Ijdoddmpvjpfx Afiear Of course, by omitting or purchasing additional frames, you can also configure longer or shorter racking units (or by adjusting the bay spacing); this example with 4 frames is simply the most common racking solution!! A hot-dip galvanized cantilever rack system, consisting of: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 adjustable cantilever arms each Load capacity with load center at 600mm: 500 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 500kg = 2,000 kg, arms made of IPE 80, With longitudinal and diagonal bracings, axle spacing = 1,300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay spacings) are also available on request, subject to surcharge and with longer delivery times as these need to be custom-made! If you do not specify other bay spacings, we will deliver the racking unit with a bay spacing of 1.30m. In this case, the length of a single row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany as parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, The prices listed in this advertisement are as of mid-2021. Due to the current international situation, steel and transport prices are rising almost daily. The availability of raw steel is tight and currently unpredictable. Ijdsddmr Nepfx Afioar Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with an up-to-date quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport cost within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames you can build longer or shorter rack units (also by varying bay distances); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided rack uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - with 2 x 3 adjustable arms each 1.20m, 500kg load capacity per arm - with ties approx. 1.30m - Upright, double-sided approx. 4160mm high, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable cantilever arms - Load capacity at load centre 600mm: 500kg per arm / 2250kg per upright side - With longitudinal and diagonal bracing, spacing e = 1300mm, standard is 1.30m Other standard frame lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies in addition to the price stated! Special sizes (other bay distances) are also available on request, but likewise subject to a surcharge and with a longer delivery time, as they must be custom fabricated! If you do not specify another bay distance, we will deliver the rack with a bay distance of 1.30m. In this case, the length of a rack line with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors.

Kondisi: baik (bekas), Technical data for the pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material color: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Full extension: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Isdpfx Afsww Im Hsijar Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipment is required, additional charges will apply, which can be requested based on the delivery location and scope.

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – New item - : Price ex works including loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional uprights (or by varying the axle spacing). This example with 4 uprights is simply the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: Isdpfef Tv T Nex Afioar Arms: IPE 80 Uprights: IPE 180 Single-sided uprights approx. 3,700 mm high, hot-dip galvanized Foot and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity at 600 mm load center: 500 kg per arm / 2,700 kg per upright With 4 uprights per arm level: 4 x 500 kg = 2,000 kg Including longitudinal and diagonal bracing, c/c spacing = 1,300 mm, standard is 1.30 m – unless otherwise specified, we will supply the rack with a 1.30 m axle spacing. Other spacings available, e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or custom sizes! Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Supplied complete with all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baru, Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new: Price ex works, including loading! Price: €1,480 (net) Price for transport / packaging within Germany (excluding islands): €400 (net) You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new equipment Description: - Frame, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 800 mm - Each frame fitted with 3 height-adjustable arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 750 kg = 3,000 kg Profiles: frames (uprights): IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing Standard bay spacing between frames is 1.30m. Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m. For bay length from 1.50m and above, a small surcharge applies to the listed price. Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time. If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors. Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at extra charge), see attached photos: - Base section with impact protector - Base section with large impact protector - Base section with wheel guard - Cantilever arm with impact protector - Plug-in roll-off protection for cantilever arm - Clamp-on roll-off protection Iedpfx Afsnwmwveijar - Grating shelves - Conversion for pallet storage use Photos are for reference only and show typical single-sided rack examples and material used.

Kondisi: baru, Tahun pembuatan: 2020, Single-sided cantilever rack, 6.30 m height, 1.20 m arms, 900 kg per arm – New: Price ex works, including loading! 1 racking unit with 4 uprights: €3,732 (net)! Iodsfivg Sjpfx Afisar Transport costs within Germany (excluding islands): €490 (net)! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided uprights approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm, each with 3 height-adjustable arms - Load capacity with 600 mm load center: 900 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 900 kg = 3,600 kg - Profiles: Frame: IPE220, Arms: IPE100 - With longitudinal and diagonal bracing (center distance = 1,300 mm, standard is 1.30 m) - Other standard bay lengths available from stock: 1.00 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - From 1.50 m length onwards, a small surcharge applies to the stated price - Custom dimensions (other bay widths) are available on request, but incur an additional charge and have a longer delivery time as they are custom manufactured. - If you do not specify a different bay width, the rack will be delivered with a 1.30 m bay width. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4 m. - Delivery includes all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New stock - : Price ex works including loading! 1 racking unit with 4 uprights: €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! You can also create longer or shorter racking units by omitting or purchasing additional uprights (or by adjusting the spacing between the uprights). The example with 4 uprights represents the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided racking uprights, approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm with three height-adjustable arms per upright - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 500 kg = 2,000 kg Ijdpfx Ajfivg Rjfioar - Profiles: Uprights: IPE220, Arms: IPE 80 - With longitudinal and diagonal braces, center-to-center distance = 1,300 mm. Standard measurement is 1.30m. - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m length, there is a small surcharge on the stated price! - Custom dimensions (other center-to-center distances) available on request, subject to surcharge and longer delivery times due to special fabrication! - Unless otherwise specified, we supply the racking with a center distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. Isdpfjfivhfsx Afiear - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different bay spacing); this example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided racking uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms each, 1.20 m, 500 kg load capacity per arm Iaodpfx Afjddmq Teier with bracing approx. 1.30 m Double-sided uprights approx. 5,180 mm high, hot-dip galvanized Foot and arm depth 1,200 mm with 3 height-adjustable storage arms each Load capacity at load center 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, c/c = 1,300 mm; standard is 1.30 m Other standard bay lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From bay length 1.50 m a small surcharge applies to the stated price! Special dimensions (different bay spacings) are available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! If you do not specify other bay spacings, we will supply the rack with a bay spacing of 1.30 m. In this case, the length of a racking run with 4 uprights (3 bays) is approx. 4 m. Supplied with all bolts and nuts (dispatched within Germany in a package directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location, including loading! 1 racking unit with 4 uprights: €2,899 (net)! Shipping within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by using different bay widths); this 4-frame example is simply the most common solution! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 80 - each with 2x3 adjustable arms, 1.20m long, 500kg load capacity per arm - with cross bracing approx. 1.30m - Uprights double-sided, approx. 3500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm; standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From bay width 1.50m an additional charge applies. Custom sizes (different bay widths) are available on request, also at an additional charge and with longer delivery times as they must be specially manufactured! If you do not specify a different bay width, we will deliver the racking with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Iodpfxoddmtcj Afisar Other configurations (upright height, arm length, arm types, etc.) available! Please contact us for options!

Kondisi: sangat baik (bekas), NOMOR KATALOG 7915 DATA TEKNIS lebar poros: 640 mm jumlah pisau: 4 buah ketebalan maksimum elemen yang dikerjakan: 200 mm – dari atas: ratchet/anti-backlash poros pengumpan bergerigi, penarik penekan poros planer penekan poros keluaran halus, penarik – dari bawah: rol yang dapat diatur di meja bawah: 2 buah motor: 7 kW pengaturan kecepatan feeding secara stepless dimensi (panj/lebar/tinggi): 1800 x 1250 x 1150 mm berat: 1250 kg Isdsyrrzpopfx Afijar KEUNGGULAN – buatan Bulgaria – pengaturan kecepatan feeding yang stepless – mesin planer thickness bekas, kondisi sangat baik Harga netto: 9500 PLN Harga netto: 2260 EUR sesuai kurs 4,2 EUR (Harga dapat berubah mengikuti fluktuasi nilai tukar)

Kondisi: bekas, nomor mesin/kendaraan: 008030, Tipe tepi yang terpasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR, udara panas Pengefraisan join: ya Unit multifungsi: ya Kecepatan umpan maksimum: 25 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 8 unit Iasdowvq Hgspfx Afior

Kondisi: bekas, nomor mesin/kendaraan: 008417, Tipe tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA Penggabungan milling: ya Iaedpfx Afoy D Af Deisr Unit multifungsi: ya Kecepatan umpan maksimum: 12 m/menit Ketebalan panel maksimum: 60 mm Unit kerja: 7 unit

Kondisi: bekas, nomor mesin/kendaraan: 008111, de-001 Iaedpfx Ajy Dq Iaefijr

Kondisi: bekas, nomor mesin/kendaraan: 008019, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA Penyambungan milling: ya Iedpfx Afswvq E Noisar Unit multifungsi: ya Unit milling atas: ya Kecepatan umpan maks.: 40 m/menit Ketebalan panel maksimum: 60 mm

Kondisi: bekas, column-type hydraulic press EXNER Type EEX 20 S . 1615 Year of manufacture 1980 Pressing force 20 tons Throat depth 180 mm Table size 380 x 350 mm Table opening Ø 50 mm Ram area 310 x 250 mm Clamping pin Ø 35 mm Ram stroke 100 mm Max. installation height 250 mm Table height above floor 900 mm Downward speed approx. 480 mm/s Upward speed approx. 480 mm/s Working speed 20 mm/s Hydraulic tank capacity 110 liters Hydraulic operating pressure at 20 tons: 200 bar Motor power 4 kW Power supply 400 Volt, 50 Hz - Stroke initiation via two-hand control or light curtain - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU with single- and double-stroke and safety function Iaedsyz Dtdepfx Afisr - Rapid approach stroke and working stroke - Stroke limitation, pressure- or stroke-dependent - Mechanically adjustable fixed stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating instructions and electrical circuit diagram included - Stroke counter Required space (L x W x H) 1250 x 750 x 2000 mm Weight 1.4 tons Good condition

Kondisi: bekas, nomor mesin/kendaraan: 008437, Typ der angebrachten Kante: dünne Kante, starke Kante Klebesystem: EVA, PUR Isdpsyng Agefx Afioar Fügefräsen: ja Multifunktionsaggregat: ja Max. Vortriebsgeschwindigkeit: 12 m/min Maximale Plattendicke: 60 mm Arbeitsaggregate: 7 nr

Kondisi: baik (bekas), Tahun pembuatan: 2015, nomor mesin/kendaraan: 0-200-24-0779, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 55 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, panjang total: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left side. Year of manufacture: 2015 SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift at feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming, climb/contra-rotation, 2 x 4 kW, usage-controlled Horizontal positioning via NC motor (CAN) GLUING UNIT A20, consisting of: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA adhesive - Capable of processing both EVA and PUR adhesives - Edge magazine: min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) for edge thickness, 1 powered and 4 non-powered pressure rollers POST-PROCESSING SECTION: - PK25 cross-cutting unit, horizontal, 2 motors each 0.8 kW (front/rear edge), Isdpfxjy A I Sgj Afijar for chamfer/straight as well as excess edge trimming - Pre-/flush trimming unit 1.15 kW, top/bottom - FK11 profile trimming unit (corner rounding), 2 motors (top/bottom) with motorized fine adjustment, controlled via control panel Various interchangeable heads equipped with tools - Universal trimming unit 3.5 kW, controlled - Multi-profile scraper top/bottom - Flat scraper top/bottom - Buffing unit top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Kondisi: bekas, nomor mesin/kendaraan: 008161, tr-de-001 Iasdpfx Aex A Tlcjfior

Kondisi: bekas, nomor mesin/kendaraan: 008483, de20240614a Iaedpfeyxmx Rox Afior