Truk bak dump tiga sisi

MAN TGM 18.320 4X4 BB Krankipper Palfinger PK 12.501

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Dksdpfomhhypjx Aatst

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. Dkjdpfxsh Ek Dao Aatet The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: bekas, Tahun pembuatan: 2007, Shrink wrapping machine Dedpfxjulixqo Aatokt Hugo Beck CWS 500 Year of manufacture: 2007 Description: - L-sealer - Shrink tunnel

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments Dedpfjmkixwex Aatjkt - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: bekas, Tahun pembuatan: 2014, 10x Genie GS1532 Tahun pembuatan: 2012/2013/2014 Dkodpfx Asxciiwjatst Tinggi kerja: 6,60 m P x L x T: 2,00 x 0,80 x 2,06 m Berat: 1270 kg

Kondisi: baik (bekas), Girboks PTO, girboks pompa hidrolik, girboks, gir roda gigi, gir transmisi, gir pembalik Dkodpfx Aaevum Sdstet -Girboks PTO: Girboks pompa hidrolik dengan poros profil yang terhubung -Sambungan poros input PTO: 1-3/8" dengan 6 gigi -Sambungan poros output gigi: 35x31 Z-18 -Jarak antar poros: 204 mm -Lingkaran lubang: Ø 155 mm / M12 -Rasio transmisi: i = 1:1 -Dimensi: 350/205/T220 mm -Berat: 13,2 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Djdemhh Dhjpfx Aatjkt Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: bekas, jarak tempuh: 443.865 km, daya: 205 kW (278,72 hp), pendaftaran pertama: 11/2006, jenis bahan bakar: diesel, berat kosong: 9.710 kg, berat muatan maksimum: 8.290 kg, berat keseluruhan: 18.000 kg, ukuran ban: 315/80R22.5, konfigurasi gandar: 4x2, jarak roda: 5.700 mm, rem: gas tetap, warna: biru, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, suspensi: udara, jumlah tempat duduk: 2, panjang ruang muatan: 7.000 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 600 mm, Perlengkapan: ABS, derek, kabin, kebisingan rendah, kemudi berkuasa, kendali jelajah, kontrol traksi, kunci diferensial, lampu depan tambahan, pemanas jok, sistem immobilizer,

Kondisi: baik (bekas), Berbagai macam kolektor penghisap, distributor penghisap Hanya tersedia corong C, detailnya lihat pada foto. Dkedpfxotp Hpbj Aatst Corong penghisap C: 140 Euro. Bagian-bagian tersebut dapat dilihat langsung di tempat kami setelah perjanjian waktu. Kami hanya menawarkan mesin yang siap ditampilkan dan tersedia di gudang kami, lihat "penawaran lainnya dari penyedia ini".

Tahun pembuatan: 2022, Kondisi: baru, Hydraulic press 6 m automatic for lignum mini finger joint line Used 2022 Make: Dkedpfx Asimwx Ejatot Hydraulic press 6 meters automatic for lignum line joining Model: Hydraulic press 6 meters automatic for lignum line joining Description: Hydraulic press, 6 meters, automatic, designed for the lignum mini finger joint line. INPUT TRANSPORT, automatic output conveyor, automated process. For more information, please send an email. Year: 2022