Stahltreppe

Stahl Höhe 2140 mm Geländer beidseitig

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard Rodpfxjh Ek Das Ahuecf - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Rjdpfx Ahemhhypeuscf

Kondisi: baru, Tahun pembuatan: 2024, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Jointer table length: 2300 mm Jointer fence, angle adjustable: yes Jointer tables, foldable: pneumatic Rcedpfxsvadxlj Ahuef Maximum thicknessing height: 250 mm Thickness table height adjustment: electric with position control Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: sectional Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 3.350 h, Perlengkapan: pendingin udara, Berat kosong: 16.000 kg Dimensi (P x L x T): 777 x 249 x 296 cm Jenis mesin: Deutz DEUTZ TCD 3.6L4 Redpfxezi Eb Aj Ahuocf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Rcjdpfxomkixwo Ahuef Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: bekas, jarak tempuh: 250 km, daya: 235 kW (319,51 hp), pendaftaran pertama: 09/2025, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, warna: putih, tipe perpindahan gigi: otomatis, panjang ruang muatan: 4.000 mm, lebar ruang muat: 2.450 mm, tinggi ruang muatan: 600 mm, Perlengkapan: ABS, derek, filter jelaga, pendingin udara, penggerak semua roda,

Kondisi: bekas, warna: lain, Tahun pembuatan: 2018, jam operasional: 2.695 h, Penggerak: Track Daya mesin pembakaran dalam: 47 HP (35 kW) GVW: 4.662 kg Merek mesin: Perkins Tanda CE: ya Nomor seri: JCB048Z1PJ1921665 Mesin Untuk Dijual Kunjungi situs web kami untuk berbagai mesin siap jual. Pilihan kami lebih banyak daripada yang terlihat online, jadi silakan hubungi kami kapan saja melalui telepon atau email. Semua mesin kami telah sepenuhnya diservis dan diperiksa keandalannya. Butuh foto? Silakan hubungi kami, kami akan segera membagikannya. Rcodpow H Abdofx Ahuef Kami siap melayani Anda dalam bahasa Belanda, Inggris, Prancis, Jerman, Spanyol, dan Rusia. Temukan beragam mesin andalan kami.

Kondisi: bekas, jenis bahan bakar: diesel, pendaftaran pertama: 06/2014, Tahun pembuatan: 2014, jam operasional: 2.900 h,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: UB421, jarak tempuh: 154.542 km, daya: 95 kW (129,16 hp), pendaftaran pertama: 01/2009, jenis bahan bakar: diesel, berat kosong: 4.010 kg, berat muatan maksimum: 1.990 kg, berat keseluruhan: 6.000 kg, konfigurasi gandar: 4x2, inspeksi berikutnya (TÜV): 01/2027, bahan bakar: diesel, warna: oranye, tipe perpindahan gigi: otomatis, kelas emisi: Euro 4, jumlah tempat duduk: 6, panjang ruang muatan: 2.950 mm, lebar ruang muat: 2.200 mm, tinggi ruang muatan: 1.450 mm, Perlengkapan: ABS, filter jelaga, gerobak kemiringan, kantung udara, kunci diferensial, pintu geser,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width Redpfx Ahjmhh Dheuocf - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.