Jalur pemetik tangan, bergerak

Marico

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: Cgjdpfx Abovgrh Uohsn The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Tahun pembuatan: 2003, jam operasional: 43.000 h, Kondisi: perlu perbaikan (bekas), nomor mesin/kendaraan: HBC 140 2x75kW 2003 (W230-005), nl-naar-en Cedpfjkcgynsx Abhogn

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HBC 140 2x75kW 2001 (210-008-01), gaya penekanan: 155 t, berat bal: 1.500 kg, tekanan: 250 batang, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, Verkocht door Bollegraaf Recycling Solutions, de oorspronkelijke fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-rattenbekabeling 0 uur na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit bevat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na de demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende onderdelen: • Persplunjer • Frame • Kanaal • Voordruk-klep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventueel las- en herstelwerk worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen en slangen worden vervangen. De hydraulische componenten worden gereviseerd. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en teruggeplaatst op eenvoudig toegankelijke posities. Slijtagedelen: Alle slijtagedelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtagedelen van (beide) naaldinstallaties en knopers worden vervangen. Cjdpfstvau Asx Abhogn Cilinders: De cilinders worden gereviseerd en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (‘human interface’) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Content: approx. 56 m³ bolted, robust segment construction Csdpfslxyk Tsx Abhegn mechanical flat slide valve discharge trough 400 x 1,000 mm

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de1 Cgodpfx Abjxb Tbzshjn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 37.656 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 85 t, lebar bukaan pengisian: 1.500 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 650 kg, berat keseluruhan: 25.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2024, laju aliran volumetrik: 410 m³/jam, lebar transportasi: 2.400 mm, panjang transportasi: 9.300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for the accuracy and completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale size: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used by a recycling company for compaction of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed in the last 3 years. The machine has been regularly maintained. We would be pleased if this baler is of interest to you. Your Service Team, Cedpjv T I Evjfx Abhogn Mertens & Frowein GmbH

Kondisi: bekas, berat keseluruhan: 1.500 kg, diameter rotor: 252 mm, panjang total: 1.800 mm, tinggi total: 2.000 mm, lebar total: 1.200 mm, lebar rotor: 600 mm, daya: 18,5 kW (25,15 hp), kecepatan rotasi (maks.): 90 rpm, lebar bukaan pengisian: 600 mm, panjang bukaan pengisian: 800 mm, 3255 Single-Shaft Shredder / WEIMA WL 4 Used Low-noise and slow-running V-Rotor System Main drive motor power: 18.5 kW Rotor diameter: 252 mm Rotor width: approx. 600 mm Rotor speed: approx. 90 rpm Hopper volume: 0.6 m³ Feed opening: 800 x 600 mm (L x W) Reversible, concave-ground knives Automatic / Manual operation Screen perforation: 15 mm Extraction port: 160 mm Transport dimensions approx. 1800 x 1200 x 2000 mm (L x W x H) Weight approx. 1500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport, or installation Dismantling, loading, and transport by us available as an option Cgjdpex Hhk Rsfx Abhsn Description and price subject to change To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the sale is: "sold as inspected" Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 170 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat keseluruhan: 40.000 kg, kapasitas tangki oli: 3.000 l, tahun perombakan terakhir: 2024, For sale is a used bale press system consisting of a chain belt conveyor designed for below-floor operation, equipped with a feed hopper, a hydraulic pre-compressor with agitating device, a MACPRESSE 111A baler, two complete wire feed frames each with five wire reel stands (without wire). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific pressure: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Binding: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/hour, material dependent Cgodpou Th D Rofx Abhjn Hydraulic oil tank volume: 3,000 L Transport dimensions (baler with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and tested upon completion, see our functional video for reference. The system was previously used for baling paper and cardboard from municipal collections. After the contract period ended, the press line became available for sale. Details of overhaul work and replaced spare parts can be found in the detailed photo documentation and our offer. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment is possible. We assume no liability for technical details or possible errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain Belt Conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Feeder belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Height of drive axle above ground: 5,777 mm Side wall height feeder: 500 mm Side wall height incline: 880 mm Steel carrier height: 40 mm Carrier spacing: 1,200 mm Transport dimensions (dismantled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor (year 2017) was custom-built and installed to match the press during the last installation in the Netherlands. The conveyor is in good working condition and was not overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 chain belt conveyor by Wagensveld B.V. 1 feed hopper with pre-compression flaps 1 agitating device 1 MACPRESSE baler, type 111A 2 wire feed frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic diagrams

Kondisi: baik (bekas), Tahun pembuatan: 2008, diameter rotor: 368 mm, WEIMA Crusher Seri HWV 3000 (37 kW) dan Single Shaft Shredder WL12 (30 kW) Ideal untuk pra-penghancuran limbah kayu seperti palet, diikuti dengan pemisahan logam dan penghancuran lanjutan. Keuntungan: Proses dua tahap: Pra- dan penghancuran lanjutan untuk efisiensi maksimal. Bisa diaplikasikan secara fleksibel: Wood chips untuk sistem pemanas atau mesin briket. Operasi dengan tingkat kebisingan rendah. Cgodpfx Aex I S Hfsbhen Detail Teknis – HWV 3000: - Daya: 37 kW - Dimensi (corong): Lebar 3375 mm x Tinggi 1630 mm - Pisau pemotong: 58 pisau dalam dua baris Detail Teknis – WL12/30: - Daya: 30 kW - Diameter poros: 368 mm - Saringan: 15/20 mm Aplikasi: - Pengolahan dan daur ulang limbah kayu - Energi dari wood chips atau briket

Tahun pembuatan: 2013, Kondisi: bekas, Technical specifications for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of opened bales: 674 pcs Operating time: only 3 days, exclusively for commissioning the entire system upon initial installation Opening cycle: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum bale weight: 2,000 kg Conveyor height: 1,400 mm Cgjdpfx Abju Tg I Dshen Maximum conveyor width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of delivery: - Infeed conveyor 3,500 x 1,200 x 1,400 mm - Feed conveyor to opener 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for the short operating period: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The background for the installation was to ensure that in case of a malfunction or during maintenance of the incineration plant, municipal waste could still be received, compacted, wrapped, and stored, until normal operations resumed. Afterwards, all bales could be opened and the waste fed into the standard incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and has never been used in regular operation since. Only during the commissioning and initial trial runs in 2015 were 674 bales opened over a period of three days. The system is in excellent, immediately operational condition. Due to reconstruction work at the incineration plant, the installation site of the bale opener was required for other purposes. Therefore, the complete line is now available for sale. Brief description of the bale opening process: Pressed bales are placed onto the feed conveyor from the side or from behind using a forklift truck. For opening, the bales must be positioned so that the wire or twine strapping runs horizontally to the conveyor; otherwise, the bales must be rotated by 90°. The infeed conveyor advances one bale at a time to the cutting unit. The gripper holds the wires or twine strapping firmly. The rotating knife cuts the bale longitudinally. Afterwards, the gripper returns to its home position. The opened bale is then conveyed to the discharge chute and falls onto the downstream conveyor technology. Remarks: Original purchase price of the entire system: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. The system has been dismantled into shipping units, placed in storage, and is available at short notice for inspection and loading. We accept no liability for the technical data provided or for any potential errors.