Beli Baba bekas (49)

Tahun pembuatan: 2000, Kondisi: bekas, Delivery pressure: 7 bar Flow rate: 1000 l/min Operating pressure: 10 bar Total power requirement: 7.5 kW Machine weight approx. 0.52 t Space requirements approx. 2.4 x 1.0 x 1.9 m Combined screw compressor with dryer and tank - Dryer Psdjrc Iqwepfx Ab Herc - Tank - Noise level: 72 dB

Kondisi: baru, Tahun pembuatan: 2025, MEBAbase: The Must-Have for Makers. The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, for craftsmen, or for metalworkers – there is something for everyone. The portfolio ranges from small manual mitre saws to straight-cut automatics, making them the cornerstone of your workshop. The universally applicable mitre band saw MEBAbase 24 DG offers advanced ergonomics and outstanding value for money. Simple, central operation. Technical Data Cutting Capacity 90° - 240 - 310x240 45°L - 200 - 200x200 45°R - 200 - 200x200 30°R - 140 - 200x140 Remnant Length 60mm Cutting Speed 35 and 75m/min, pole switchable Drive – Saw Band 1.10/1.8kW; 3 x 400V, 50Hz Saw Frame Feed Infinitely adjustable up to 200mm/min, hydraulically adjustable Saw Band Tension Mechanical Prsdpfjnfvl Sex Ab Hoc Saw Band Dimensions 2910 x 27 x 0.9mm Working Height 900mm (without mounting elements) Weight 470kg Dimensions 800 x 1750 x 1500mm Standard Features of the MEBAbase 24 DG - MEBA Mitre System: Large, swiveling table prevents cutting into the material support surface – minimizing wear costs! Material is always clamped squarely against the saw band. - Manual mitre adjustment from 90° to 30°, stepless, using a scale with 1.0° accuracy - The pivot point for mitring is the intersection of the saw band and the material support, which means there is no change in length when changing angles - End stops at 30° – 45° – 90° – 45° - Hydraulic quick-clamping for material. At any saw frame angle, the material is clamped parallel at 90° - Central machine control - Adjustable cutting pressure by the dead weight of the heavy, torsion-resistant saw frame, with fine regulation according to material cross-section using a hydraulic damping cylinder and balancing spring - Saw band drive with automatic shut-off - Infinitely adjustable vise jaws - Movable band guide arm, adjustable to material width - Saw band deflection wheels with carbide guides - Practical chip collection tray with drip strainer - Integrated chip removal brush - Mechanical saw band tensioning - Operating manual and spare parts list (digital) - 1 MEBA bimetal saw band 4/6 TPI installed on the machine - Complete coolant system, painted in anthracite (RAL 7016) Technical modifications reserved. Exact delivery times will be communicated with your order confirmation.

Kondisi: baru, Tahun pembuatan: 2025, MEBAbase: The Must-Have for Makers. The starter saws of the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, for craftsmen or metalworkers – there is something for everyone. The portfolio extends from small manual mitre saws to straight-cut automatic machines, making them the foundation for your workshop. The universally applicable mitre band saw MEBAbase 17G is ergonomically optimized and offers excellent value for money. Simple central operation. Technical Data Cutting Capacity 90° – 175 – 200x75 or 190x135mm 45° – 110 – 150x110mm 30° – 75 – 100x70mm Cutting speed 35 – 80m/min Drive – Saw band 2kW; 230V, 50Hz Saw blade tension Electronically monitored Saw blade dimension 2140 x 20 x 0.9mm Weight 143 KG Dimensions 1080 x 800 x 1750mm Standard Equipment of the MEBAbase 17 G - Fast mitre adjustment from 90° to 45°, steplessly according to scale with 0.5° accuracy - Mitre rotation point is the intersection between the saw blade and the workpiece stop, so there is no change in length measurement when the angle is adjusted - Powerful 2000 W motor Podpfjdb Rwaex Ab Horc - Manual quick-release vice - Complete coolant system - Saw blade tension is electronically monitored - 1 saw blade fitted (6/10 TPI) - Saw blade drive with automatic shut-off - Operating manual and spare parts list (digital) - Anthracite paint finish (RAL 7016) Technical modifications reserved. The machine consists of two parts and must be assembled according to the assembly instructions. Exact delivery times will be specified in the order confirmation.

Kondisi: bekas, kapasitas tangki: 10.000 l, 1 Podpfx Aboxqcpyj Hsrc

Tahun pembuatan: 2013, Kondisi: sangat baik (bekas), Year of manufacture: 2013 Main motor incl. Mentor control unit Suitable for KBA RA 106 Prsdpfx Aelzhvijb Hec Machine condition: cleaned and tested Delivery time: immediately from stock

Kondisi: baru, Tahun pembuatan: 2025, Standard Equipment of the MEBAbase 32A Fully automatic bandsaw with partial enclosure for safe, clean, and quiet operation Torsion-resistant welded construction for high stability and long service life Lateral band guidance combining pre-tensioned carbide slide guides and band-twist rollers Hydraulic saw feed Psdpfxsxdv Rdo Ab Hjrc Infinitely variable saw feed speed from 1–300 mm/min Permanent monitoring of cutting pressure and feed rate, with automatic adjustment if cutting pressure is too high Infinitely variable cutting speed 10–80 m/min Large dimensioned coolant tank (approx. 90 liters) Automatic blade breakage detection with shutdown in the event of blade breakage Hydraulic blade tensioning Powered round brush for optimal tooth cleaning Automatic material feed with hydraulic full-stroke material clamping Robust, linear guided feed vice for maximum positioning accuracy Integrated end-of-material detection Feed vice opens on both sides Closed roller conveyor with precision ball bearing rollers Convenient part disposal via inclined cut-off chute with coolant return Robust panel controller with touchscreen, menu-guided, self-explanatory iconography Fully automatic sawing cycle for any length and quantity Simple program creation and management Chip conveyor as standard equipment Technical Data Type: Straight Cut Saw 90° Max. cutting capacity width ↔ (mm): 320 Max. cutting capacity height ↕ (mm): 320 Max. cutting capacity Ø (mm): 320 Material to cut: tube, solid round material, square tube, solid square material Motor [kW]: 5 Saw blade [mm]: 4115 x 34 x 1.1 Blade speed [m/min]: 10–80 Dimensions (LxWxH) [mm]: 2250 x 2300 x 1700 Weight [kg]: 2000 Working height [mm]: 830 Feed length per single stroke [mm]: 500 Degree of automation: Series cutting Options / Additional Equipment Additional chip conveyor or customer-specific chip brush solutions Extended coolant systems Customizable cutting line display (laser) Installation elements (on request) Technical modifications reserved. The machine is sold under statutory warranty conditions. Details regarding exact delivery time will be included in the order confirmation.

Kondisi: baru, Tahun pembuatan: 2025, Cutting diameter: 240 mm Saw blade length: 2910 x 27 x 0.9 mm Cutting width: 310 mm Table height: 900 mm Cutting speed: 35 + 75 m/min Total power requirement: 1.1 / 1.8 kW Machine weight: approx. 470 kg Space requirement: approx. 800 x 1720 x 1450 mm Standard equipment of the MEBAbase 24 DG-HS: - MEBA mitering system: Large, swiveling table prevents the saw blade from cutting into the material support surface – resulting in low wear costs! The material is always clamped square to the saw blade. - Manual miter adjustment from 90° to 30°, stepless via scale with 1.0° accuracy - The miter pivot point is at the intersection between the saw blade and material support, therefore there is no change in length measurement when the angle changes - End stops at 30° - 45° - 90° - 45° - Hydraulic material clamping. The material is clamped parallel at 90° in any saw frame angle Prjdowa Ui Tspfx Ab Hjc - Centralized machine operation - Cutting pressure reduction via the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section using a hydraulic damping cylinder and weight compensation spring - Saw blade drive with end stop - Stepless vise jaw adjustment - Adjustable movable blade guide arm for material width - Saw blade deflection pulleys with carbide guide - Practical chip collection tray with drip screen - Integrated chip cleaning brush - Mechanical saw blade tensioning - Operating instructions and spare parts list (digital) - 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine - Complete coolant system - Paint finish anthracite (RAL 7016)

Kondisi: bekas, kapasitas tangki: 1.500 l, UMUM Bentuk konstruksi: berdiri Psdpfxexqahye Ab Horc Pemanas/Pendingin: tersedia Isolasi: tersedia Suhu operasi maksimum yang diizinkan: 145 °C Tekanan operasi maksimum yang diizinkan: 4,0 bar Tekanan berlebih maksimum: 3,5 bar Pengaduk: pengaduk balok Bentuk penopang: kaki Lokasi: gudang luar Temperatur silinder: jaket ganda Pelat nama: Vakum: 1,0 bar Volume: 1.500 liter Material kontak produk: V2A 1.4301 (AISI304) Kondisi: bekas Penggunaan terakhir: susu TANGKI Suhu operasi maksimum tangki / °C: 145 °C PERLENGKAPAN Manhole/dome: di bagian atas Outlet: tersedia

Kondisi: baru, Tahun pembuatan: 2025, The entry-level saws of the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for hobbyists in the garage, craftsmen, or metalworkers – there is a solution for everyone. The universally applicable mitre band saw MEBAbase 25 G is ergonomically optimized and offers excellent value for money. Simple, central operation. Technical Data: Cutting capacity 90° – 255 – 265x200 or 200x200mm 45° – 175 – 200x160mm 30° – 110 – 115x100mm Cutting speed 35 / 70 m/min Drive – saw band 2kW; 400V, 50Hz Saw band tension Electrically monitored Saw band dimensions 2565 x 27 x 0.9mm Weight 265 kg Dimensions 1180 x 1500 x 1750mm Standard equipment of the MEBAbase 25 G - MEBA mitre system: Large, swiveling table prevents sawing into the material support surface – low wear costs! The material is always clamped square and close to the saw band. - Fast mitre adjustment from 90°–45°, infinitely variable via scale with 0.5° accuracy - The mitre pivot point is the intersection between the saw band and material support, so length dimensions remain unchanged when the angle is adjusted - Manual quick material clamping - Material stop with scale up to 500mm - Complete coolant system Pjdpfx Aot Rv Iiob Herc - Saw band tension electrically monitored - 1 saw band installed on the machine 6/10 tpi - Saw band drive with automatic cut-off - Operation manual and spare parts list (digital) - Finish in anthracite (RAL 7016) Technical specifications subject to change. The machine consists of two parts and must be assembled according to the assembly instructions. You will receive precise delivery information with your order confirmation.

Kondisi: baik (bekas), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Manufacturer: Vötsch VCS 7034-5 Test Chamber Volume: 335 liters Performance Specifications for Temperature Testing - Temperature Range: -70 to +180°C - Temporal Temperature Deviation K: ±0.1 to ±0.5 - Spatial Temperature Deviation K: ±0.5 to ±2.0 - Temperature Gradient: 1 to 4 K Psdoxmhycepfx Ab Horc - Rate of Change: - Cooling: 6.7 K/min - Heating: 6.8 K/min - Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature Calibration Points: +23°C and +80°C Performance Specifications for Climate Testing - Temperature Range: +10 to +95°C - Temporal Temperature Deviation: ±0.1 to ±0.3 K - Spatial Temperature Deviation: ±0.5 to ±1.0 K - Temperature Gradient: 1 to 2 K - Humidity Range: 10 to 98% - Temporal Humidity Deviation: ±1 to ±3% - Dew Point Range: -3 to +94°C - Heat Compensation: 400 W - Climate Calibration Points: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Nominal Power: 10 kW Nominal Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R452A / R-23 Important Safety Information for Buyers! The following procedures are carried out on all chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Kondisi: siap digunakan (bekas), 240 V, 1 fasa, 50 Hz, 0,3/2,1 kW, dimensi: 1700 mm x 700 mm x 1500 mm. Pedew Rrt Aspfx Ab Hsrc

Kondisi: bekas, nomor mesin/kendaraan: 6742, Division into degrees, minutes, and seconds Diameter: 400 mm Prsdpfx Abjbzfqdo Hoc Dimensions: L 500 x W 650 x H 160 mm Weight: 70 kg

Tahun pembuatan: 2011, jam operasional: 3.210 h, Kondisi: sangat baik (bekas), en-001 Pedpfx Aow U U Nhsb Horc

Kondisi: bekas, nomor mesin/kendaraan: 7016, Table diameter: 320 mm Prodpfxeb Nxpro Ab Hsc Constructive height: 103 mm Centering bore: Morse taper 4 (MT4) Required space: 400 x 500 mm

Kondisi: sangat baik (bekas), Type: WK3-340/70 Weiss Climate Test Chamber, Water-Cooled Control Panel: "Touch Panel" All control and operation commands can be executed by simply touching the function icons on the "Touch Panel" control interface. Leveling Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine unit, the climate test chamber is equipped with adjustable feet. Access Ports The test chamber is fitted with access ports on both the left and right sides, enabling the introduction of measuring cables and test devices into the test space. Access ports included as standard equipment: R1: Nominal width 125 mm L1: Nominal width 85 mm Chamber volume: 335 liters Test chamber interior dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Data for temperature tests: Minimum temperature: –72°C Maximum temperature: +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% r.h. Operating data: Test chamber lighting: Halogen, 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Fuses (to be provided on-site): 16 A slow-blow Refrigerants: R-452A / R23 Weight: Approx. 585 kg Important information for your safety as a buyer! The following checks are performed on our offered chambers prior to sale: Prsdpsxmg Sdsfx Ab Hoc 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (see picture) (Specifications and data subject to change and errors excepted!) Should you have any further questions, we are happy to assist you by phone.

Kondisi: siap digunakan (bekas), Ab 2010. Voll funktionsfähig. Nennluftstrom: 1700 m³/h Entfeuchtungsleistung: ca. 324 kg/Tag bei +20ºC und 60% rel. Feuchte Predpfx Ajvln Syjb Hjc Normaler Arbeitsbereich: -20ºC bis +40ºC Elektrischer Anschlusswert: 21,1 kW / 3×230/400V / 50Hz Anschlussleistung Dampf/Gas: 3,2 kW / 3×230/400V / 50Hz Abmessungen: 1200×870×1640 mm Gewicht: 280 kg

Kondisi: baik (bekas), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Vötsch VCS 7034-5 Test Chamber Volume: 335 liters Performance for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature gradient: 1 to 4 K - Rate of change: - Cooling: 6.7 K/min - Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration points: +23°C and +80°C Performance for Climate Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following information: The following points are carried out on all chambers offered by us in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run Condition: used Pedpfexgd Rdex Ab Hsrc Scope of delivery: (see image) (Technical data and specifications subject to change and errors!) For further questions, feel free to contact us by phone.

Kondisi: baik (bekas), Vötsch Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance Data for Temperature Testing: Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climate Testing: Temperature range: +10°C to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Podpfx Absxbrkhs Herc Temporal humidity deviation: ±1 to ±3% Dew point range: -3°C to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber internal dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Power supply: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further inquiries, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Weiss Type: WK3-600/70 Climatic Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 4.0 K/min Cooling 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatial: ±0.5 to ±1.5 K Heat compensation max. 2500 W Data for Climate Testing: Temperature range: +10°C to +95°C Dew point temperature range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3% RH Temperature uniformity: Spatial: ±0.5 to ±1.0 K Heat compensation max. 500 W Test chamber volume: 600 liters Pedpow Nqhpefx Ab Horc Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1998 mm, Width 1000 mm, Depth 1745 mm Port diameter: NW 125 mm and NW 50 mm Operational Data: Rated voltage: 3/N/PE AC 400V 10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 452A & R23 Weight: 680 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (See photo) (Changes and errors in the technical data and specifications are reserved!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), en_TIRA_Type_TCC_7120_Temperature_range_-75C__180C_Air-cooled_co ndenser_Temperature_stability_temporally_and_at_the_center_of_the _test_chamber_0.1C__0.3C_Maximum_temperature_change_rate_Heating_ 4C_per_min_Cooling_3C_per_min_Humidity_range_10__to_98__relative_ humidity_Humidity_stability_temporally_1__to_3__Dew_point_range_f or_long-term_tests_2C_to_94C_Dew_point_range_for_short-term_tests _-20C_to_2C_External_dimensions_LxWxH_1320_x_2235_x_2137_mm_Test_ chamber_dimensions_LxWxH_1000_x_1130_x_1020_mm_Test_chamber_volum e_approx._1152_liters_Max._load_per_shelf_50_kg_Max._floor_load_i n_test_chamber_100_kg_Refrigerants_R404A_and_R23_Power_supply_400 V_+6_-10__50Hz_3P_N_PE_Nominal_power_10.2_max._17.5_kW_Nominal_cu rrent_19.5_max._32.0_A_Noise_level_approx._80_dBA_Weight_1180_kg_ For_your_safety_as_buyer_please_note_the_following_The_following_ services_are_performed_in_advance_on_the_chambers_we_offer_1._Fun ction_check_and_replacement_of_necessary_components_2._If_necessa ry_recharge_with_legally_compliant_refrigerant_3._Leak_test_with_ certificate_4._After_successful_inspection_the_chambers_are_subje cted_to_a_documented_test_run_Condition_used_Scope_of_delivery_Se e_picture_Specifications_subject_to_change_and_errors_Please_feel _free_to_call_us_with_further_questions_ Prjdswfddwspfx Ab Hec

Kondisi: sangat baik (bekas), en-GB Podpstr Dinsfx Ab Herc

Kondisi: sangat baik (bekas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without thermal load): 10...85°C Temperature deviation over time during temperature operation: ≤ ± 0.5 K/min Temperature deviation over time during climate operation: ± 1.0... ± 1.5 K/min Change rates: Heating: average 2.0 K/min Cooling: average 2.0 K/min The IEC 1646 standard can be tested, for solar modules up to a max. weight of 160kg and with non-linear ramps (setpoint steps). Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95% r.h. Humidity deviation over time: ≤ ± 3.0...±5.0 % r.h. Dew point range: 8...80.9°C Test chamber Test chamber volume: 7.0 m³ Dimensions Test chamber internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Hinged door DIN right, heated, Width 900 mm x Height 2100 mm Viewing window, heated with blackout shutter and lockable, Width 500 mm x Height 600 mm Feed-through opening: 2x front right, ∅ 75 mm Radiation unit test chamber Cut-out: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area with SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system Bitzer compressor, semi-hermetic, 2-stage, air-cooled Condenser: split condenser (outdoor installation, winter control) Refrigerants: R507 / R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio: 50/50% Brine density: 1.072 kg/dm³ Filling volume: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Prsdpfeklv H Isx Ab Hec Power supply test chamber Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power requirement: approx. 32.0 kW Circuit breaker: 3x63, Char C (A) Power supply SolarConstant Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement: approx. 30.0 kW Circuit breaker: 3x63, Char C (A) External dimensions of the test chamber, complete with: machine room/control cabinet and control cabinet for SolarConstant 2500 Machine room external dimensions: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber, total: approx. 2700 kg Condenser weight, empty: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Here we offer a Weiss climate test chamber. Model: SB2/500/80, water-cooled Cooling/heating range: -75°C to +180°C Climatic operation: +10°C to +95°C Humidity range: 10% to 98% r.h. Temperature stability, temporal: ±0.2K Humidity stability: ±1% r.h. Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height: 1980 mm, Width: 1265 mm, Depth: 1365 mm Feedthroughs: Left side: ∅ 100 mm Right side: ∅ 50 mm Mains connection: 400V / 3Ph + N + PE / 50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerants: R404a / R23 For your safety as the buyer, please note the following information! The following procedures are carried out in advance on all chambers we offer: Pedpfx Abjm Tvzce Herc 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspections, the chambers undergo a test run monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated by simply touching the function icons on the »Touch Panel« control unit. Adjustable Feet To compensate for uneven floors and provide sufficient ventilation for the machine compartment, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with ports on the right and left sides, allowing measurement lines and test equipment to be routed into the test chamber interior. Standard ports installed: R1: DN 125 mm L1: DN 50 mm Test Chamber Interior Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Pedpjwh Ttmsfx Ab Herc Exterior Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C temporal deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temporal temperature deviation at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at the center of usable space: ±1 to ±3 % r.h. Electrical connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be provided onsite Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net For your security as a buyer, please note the following: The following measures are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors reserved!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Data for temperature testing: Temperature range: -42°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.5 K Temperature change rates: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 W Prsdpfxjqwim Ee Ab Hec Data for climatic testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature uniformity: ±0.5 to ±1.0 K Temporal humidity deviation: ±1 to ±3% r.h. Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your safety as a buyer, please note the following! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Technical specifications and details are subject to change and error!) For further questions, feel free to contact us by phone.